45.5.1 incompatible with 45.5.0. Cannot start Thunderbird.

Similar Questions

• After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  I think you should contact the manufacturer about this problem with the Bios...

  It is usually F2 or delete to enter the Bios / configuration at startup.

  See you soon.

  Mick Murphy - Microsoft partner

• My 8 victory... infected with the virus cannot start in safe mode...

  recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

  I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

  Why windows might change?

  I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

  Please reset your PC. The procedure is given in the link below:

  http://support.HP.com/us-en/document/c03546603

  If this does not help, recovery of the system to the factory settings. Consult the following document:

  http://support.HP.com/us-en/document/c03489643

• Incompatible with Firefox 31.0 Dashlane I try to recharge 30 Firefox 3.0.3. but it keeps downloading 31.0? How can I stop Firefox to upload on the new version?

  My Dashlane 3.0.3 is incompatible with Firefox 31.0. I meet this problem every time there is a new version of Firefox. In the past, I would go to the archives and get a Firefox from a number of earlier version and load this. For some reason, (probably simple). I will load the lower version and it will automatically install the next version number. I can't stop the automatic updates. I had installed Firefox 30.0 and it worked with Dashlane 3.0.3 but the system automatically downloaded the version more recent 31.0 number and of course, this is inconsistent. Dashlane is not able to write codes fast enough to install in due course to work with Firefox. I did was to say that Firefox was the only browser that I use and I used it for many years. I don't like Crome or IE. You're just a browser better, that's all.

  I didn't mean that somewhere, I lost my toolbar in Firefox and could not find a use which was also good. Just an info. You can send me any resolution you can find at: [email protected]
  Thank you for your help.

  You should not use older versions of Firefox, they are insecure, their use can lead to your personal information being stolen. Please update Dashlane to its latest version.

• After re-establishing Moz/FF, I can not WOT or ad block to work. He says that it incompatible with FF 13. Help please.

  Last night, I was able to restore Mozilla/FF. 13. However, I'm unable to use the Web of Trust (WOT) and Ad Block Plus. She says that the two are incompatible with FF 13. Anyway is around what I'm counting on the two extensions.
  Thank you
  Lee

  The latest versions of these two modules are marked as compatible with Firefox 13:

  • Adblock more
  • WOT - surf safely

  Are you able to install the Add-ons using the web pages above? If this is not the case, can you describe exactly what happens when you visit web pages and try to install add-ons?

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Z3100: z3100/3200 incompatible with windows 10

  It seems that z3100 and z3200 are incompatible with Windows 10 - they will work, but the driver cannot report problems and the HP utility cannot see the printer.

  If someone managed to find a workaround?

  Roy

  Hello

  At present the HP utility does not work with Win 10 when using a USB connection. If this is your case, try to connect the printer to the network.

  In addition, make sure that the port on the driver is set to the IP address of the printer.

• BitComet video downloader is incompatible with the 4.05 b combustion chamber

  bitcomet installed for the home but am extensions it doestnt is showing bitcomet video downloader is incompatible with the 4.05 b combustion chamber

  You will need to contact bitcomet on this subject, it is for them to make their compatible extension.

  You could install the Add-on Compatibility Reporter extension. This will automatically allow all extensions, which allows you to test to see if those that are incompatible with working again. If they don't work you can turn them off again.

• HP power supply pinout incompatible with the standard?

  My machine is a P7-1370.
  
  While researching PSU's, I found this statement to http://www.smps.us/power-connectors.html:
  
  "Compaq and HP also used incompatible systems. As a general rule, if you have a brand PC,.
  you suspect that it may be incompatible with the standard of the industry. »
  
  But in this forum I read about the people, replacing the PSU in HP machines with Corsair etc.
  
  Is there any incompatibility in the HP pinout?

  Hello

  The new class of consumers HP PCs of my standard ATX power supply to use observation provides. Some of the class business PCS have been known to use propriety feeding.  You can find some of the old HP PC using a connector ATX 20.

  It takes time for the standards to shake.  While using a power supply ATX standard can save on costs, that it could not meet the requirements for a particular need, hence the need for a special model. Sequencing of its power for devices is a case I've seen in the past to power specialized.  Another situation might be a compact cabinet where a typical diet would not fit.

  I saw the power supplies that are interchangeable between Dell and HP.

• Maverick incompatible with Officejet Pro 8600 Plus

  Maverick update os x 10.9 is incompatible with Officejet Pro 8600 Plus.

  1 PDF files from the Web pages are black and show no information when I try to print from any browser.  Must take snapshots of Web page and print from that

  2 info printer shows that it is still printing when it is finished and will not move forward to the next task

  Help, please!  I see that there is no HP software update to resolve this issue and am confused why you didn't do your printing software compatible with a huge update of Mac.

  

  Hi podisc,

  Thanks for the quick response.  It is good to hear that you can print, it's at least a start.

  I know that you have not received the error messages in the document, but the behavior you describe leads me to believe that the software did not completely uninstall or install completely with the driver for the Mavericks.

  Please follow the steps listed in the document below and let me know how it goes.

  An "unsupported Operating System" or "Software is not compatible" message on a Mac running OS X v10.9 Mavericks "

  http://support.HP.com/us-en/document/c03976994

• the software on the remote computer seems to be incompatible with this version of screen sharing

  Hello

  I use Apple Remote Desktop (see 3.8) to a MacBook Pro 15 of the retina to access an iMAC 27 5 k. I get the following error message

  "Connection failed for 'iMac_5K'.

  The software on the remote computer seems to be incompatible with this version of screen sharing.

  MacBook pro screen resolution is 1920 x 1200

  the iMac 5K resolution is 3200 x 1800

  Thank you!

  Hemdani

  What is your question? The message seems pretty clear...

• Engines: A version of the library is incompatible with the version of XNode

  I have SP1 2013 Labview and 2013 NXT Module installed f1.  I'm taking a class on Robotics where we use the Lego Mindstorms NXT module.  I have code that works very well in school, but when I load it on my laptop I get the error message: engines: library version is incompatible with the version of XNode.

  My son has the Mindstorms and I can't use the laboratory at the school (except for class) because it is open only during my work hours.

  I installed on the same disks that the school uses (their academic licences provides for this).  What should I do to get this code works on my laptop?

  Please help - I have an assignment due.

  The polymorphic VI you have in the block diagram is the patch of f1, but the other I think you are talking about is the equivalent of the patch of f2. If I am not mistaken, the school could have installed the fix for f2 (it would still appear as NXT 2013).

  This is how the VI looks in two versions:

  

  If you drop the first and the second in the school lab in your mobile, you can try to install the patch f2 in your laptop. You can download it here:

  http://www.NI.com/download/LabVIEW-NXT-module-2013/4678/en/

• DSC 8.5.1 incompatible with already installed products

  I try to install DSC 8.5.1 on a Windows XP with LabVIEW 8.5.1 system and already installed 8.6.1. When I try to install the DSC module, the installer tells me that the module will not install because "this function is incompatible with the products already installed on the computer." Can someone tell me what products are not compatible with the DSC module?

  Thank you.

  Chuck

  Hello Chuck,

  I am happy that it worked. Seems it as LabVIEW 8.6.1 the incompatible product installer complained. In order to install the DSC to LabVIEW 8.6.1, module you will need to install DSC 8.6.1, as the module and LabVIEW version must match.

• incompatible with Sync Center

  My computer says that it is incompatible with "Sync Center". Is it possible to make it compatible?

  Hi Gail,

  1. what operating system is installed?

  2. which device is connected?

  3. don't you make changes to the computer before this problem?

  4. what program or application you are trying to synchronize?

  Sync Center allows you to check the results of the recent sync activity if you have set up your computer to sync files to a network server. This allows you to access copies of the files on your network even when your computer is not connected to the network. Sync Center can tell you if the files synced successfully or if there are any warnings or errors in synchronization.

  You can see these articles for more information.

  What is Sync Center? : http://windows.microsoft.com/en-us/windows7/what-is-sync-center

  Synchronize music, photos, contacts, and calendars with a mobile device: http://windows.microsoft.com/en-us/windows7/sync-music-pictures-contacts-and-calendars-with-a-mobile-device

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• HP ProtectTools incompatible with Windows 8.1 (final)

  The current version of ProtectTools (8.0.3.1345) is reported as INCOMPATIBLE with the final version of Windows 8.1 and the strength of Microsoft before uninstall you Windows 8.1 installation updated.

  When HP will release a new version? Quite annoying because I lost the fingerprint, face and other security features.

  PS: My o/s is a Canadian french.

  

  OK guys,

  go to the hp driver download page and take a look seems that they put the windows 8.1 drivers!

  Thank you HP