validation of single key works only not with the update

Similar Questions

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• Function of ' play to ' Media Player works only not with the music on external drive

  Hi, I have not been able to "play to" music files stored on my Seagate external drive to a receiver AV Pioneer... "Play"works very well with the stored music files on my drive c of the laptop. Music on my external hard drive will appear in my library. Have laptop Windows 7 with Media Player... any help appreciated... .thanks

  Hello

  Do you have any application installed on the computer security?

  Method 1:

  If you do, I suggest you to disable anti-virus and check if it solved the problem.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the step is not enough, then you can go to the method 2:

  Method 2:

  I suggest you go through the steps and check.

  a. closed Windows Media Player12.

  b. Access Services [table-> system and security-> administration-> Services tools]

  c. find the service named "Windows Media Player Network Sharing Service"

  d. stop the Service manually.

  e. Locate the "UpnP device host"service. Stop the service and restart it.

  f. run "Windows Media Player Network Sharing Service" now.

  g. close windows all associated and the Panel. Open Windows Media Player, right click on a playlist and see if the Play option lists the TV. Try to play now.

  Hope this helps and keep us posted.

• Satellite Pro A10 - some keys not working only not with the new keyboard

  Hi all

  I hope some1 can help with this

  I have a Satellite Pro A10. The prob I have is a.b.n.and enter keys do not work and this is a new keyboard
  I hooked my other A10 and all keys work so the keyboard is fine.

  Everything works fine with the usb keyboard. Mother board everything seems ok.
  Any help please

  Chris...

  Post edited by: widgy

  Hello

  Why do you think the motherboard is ok?
  Maybe it s a controller keyboard problem
  Did you check if the cable is correctly connected?

  In my opinion if you are sure that the keyboard is ok 100% the problem to be attached to the motherboard because there is no other party that is placed between the keyboard and the mobo.

  Good bye

• JavaScript onchange doesn't work only not with the single display element

  Hello
  I am filling a form element based on the value of another element of form. Everything works great when the element that I am filling is a text box. However, if I do a single display element, it won't fill.
  Does anyone know why this is?
  
  Here's the header code:
  
  < script language = "JavaScript1.1" type = "text/javascript" >
  
  function populate_end_date() {}
  var pay_period = document.getElementById('P7_PAY_PERIOD').value;
  
  If (pay_period! = "") {}
  var pay_period_length = pay_period.length;
  document.getElementById('P7_PAY_PERIOD_END_DATE').value = pay_period.substring ((pay_period_length-11), pay_period_length);
  }
  }
  
  < /script >
  
  Here is the code of html form about to P7_PAY_PERIOD element attribute:
  OnChange = "JavaScript:populate_end_date();" »
  
  Thank you...

  Ok.

  Change display only type to as it was before (do not save the State)
  The JS below allows you to set the value of the element display only

     $x('DISPLAY_ONLY_PAGE_ITEM_NAME').innerHTML="Show this value";
  

  CITY

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• Remote control not working only not with the G10

  Hello
  my remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up

  Hello

  Have you installed any other tools or utilities, or have you changed a few settings?
  As far as I know you need the infrared receiver only to control the MCE Win.
  The receiver is plugged into the USB port. Please check in Device Manager if the receiver is recognized. Also, check the cable of the infrared transmitter is also related.
  However, if you are working with the Qosmio player receiver should be removed from the unit.

  Moreover, in the user manual, you can find useful information about the remote control

  Best regards

• SmartWatch SW2 not working only not with the LG Swift L9?

  OK, I've had something similar with previous Smartwatch (MN2), but I had hopes to go with SW2.

  LG Swift L9 is 4.1 (JBean). SW2 is *. B.0.25 (ALREADY updated with the latest, via a soft PC/cable and Sony Update Service).

  So here's how it is:
  -J' managed to pair with me LG9.

  -demand for Smart Connect (on the idle screen) so I install it from the game.

  -by opening Smart Connect on the phone, asking questions about SW2 app, once again - I install it from the game.

  -then what happens, is that I get the white rectangle on a gray background on the screen of smartwatch and SHE.

  -the only thing to recover/restart of the process is to reset the watch, try to pair again, that works, but immediately after, if I'm only smartconnect - I get the white rectangle on a gray background.

  Any ideas? Suggestions?

  My Sony - its advertised to work with 4 + smartphones Android, LG Swift L9 is such a smartphone. If it turns out to be a blocker - I'm going to Pebble (assuming that if he only works with LG L9)- AND WILL NEVER LOOK BACK.

  I wanted to stick with Sony, because I am a dev, and Sony seems to provide more structured SDK/API for this product by comparing to other smartwatches (with relatively pleasant store Play integration). But * beep *, know all this im lose confidence... (and patience).

  PS Yes - I called Sony support UK already, but they seem clueless. It seems that these guys here never had the SW2 in their hands.

  OK, looks like I solved my problem, then post it here - if someone comes barely similar.

  I took my SW2 to a colleague with another motive than mine (I think it's Samsung Galaxy something SII, also with Android 4 +). Then we paired up, and then, surprisingly - SW2 downloaded a SW update, got the upgrade to this 1.0. * slash 1.0. * version and the work began with his phone. Then we odd he reset the SW2 and paired with my phone - and it worked!

  Was apparently the version of SW2, I had initially was veeeeery old, old enough that didn't connect my LG L9 and old enough that my LG L9 might not even be updated. Once we have passed this point - everyhing works fine (at least for the last 5-6 hours).

  Problem solved then.

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• ReadyBoost Windows 7 Pro 64 bit works only not with the reader flash 32 GB USB high speed...

  Hello

  I did what I could find in support.microsoft.com search/read them all using ReadyBoost on my Windows 7 Professional 64 - bit, because he seemed much more cost-effective to install a properly sized USB key from the bombings of hundreds of dollars to replace and modernize the planks of installed RAM, I, 4x2Gb @ 1066

  My basic material is:

  Intel i7 920 CPU using Gigabyte EX58 - UD3R-MOBO with 8 GB of RAM installed 1066.

  According to the info I've read ReadyBoost, the ratio is 4:1 for the size of the Flash drive compared to installed RAM or, in my case, a 32 GB USB device.

  I had the OCZ Rally2 32 GB because it tested faster about 30 GB Read and 5 to 10 MB write.

  When I go to activate the USB 32 GB for ReadyBoost flash drive, I get the "impossible... to use this device to ReadyBoost...". "error message.

  TWO QUESTIONS:

  1 knowing that my USB 32 GB current is at a speed of 31 GB read/6-10 MB write and can be replaced if necessary:

  a. y at - it a necessary range of recommended read/write speed?

  2. further, saying: the range of tested USB disk read/write speed are correct or I will get a correct drive 32 GB and with 8 GB of RAM currently installed.

  b is it? or what is the advantage in any computer processing speed using a 32 Gb USB flash drive when it is 8 GB of RAM installed (knowing that a replacement/upgrade RAM is off-budget for the foreseeable future)?

  Finally, I pass first OCZ support but received no conclusive answers.

  1st answer to yesterday 20:11

  Win7 is limited to 32 GB size by device for ReadyBoost. I've seen this problem before when the USB key is at the maximum limit. Never seen a work around so.

  AND, more interesting for me, 2nd answer:
  Today 02:37

  Few people I know with this problem that I've never heard of a solution. I don't know anyone who devoted a lot of effort as with 8 GB of memory system is not a necessity for ReadyBoost so they just moved.

  NOTE: The support guess I are underutilizing the 8 GB of RAM installed. In fact, due to the needs work I will typically have anywhere for applications and utilities operating at 20-35 someone time, using 4-6 GB of RAM at peak use.
  Ideas?  Suggestions?
  Thank you.
  John

  Hi John,.

  A flash drive may appear to meet the requirements, but Windows may detects it not as compatible ReadyBoost if its rated speed measures sequential and random performance and performance is not always quick on the set of the flash player.

  Look for a note from the manufacturer that the flash player is Compatible Windows ReadyBoost. Not all manufacturers of this list on their packaging.

  You can check with another flash drive

  Answering your questions

  a. speed for Windows ReadyBoost requirements are at least 2.5 MB per second throughput for random readings of 4 kilobytes (KB) and 1.75 MB per second throughput for 512 k random entries.

  Using memory in your storage device to speed up your computer

  (Article is for Windows 7)

  b. ReadyBoost acts as a cache of HARD disc (hard drive) and is not a replacement for direct system memory. It will not improve processing speed, but will help the launch of faster applications and push background applications that serve much in memory reserved ReadyBoost.

  For more information, please visit the links below

  Turn ReadyBoost on or off for a storage device

  Using memory in your storage device to speed up your computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• AutoScroll doesn't work only not with the Wacom Tablet

  I had problems with a Wacom Intuos 4 with Photoshop CC.

  using Windows 7.

  I have uninstall the Wacom drivers and reinstalled. everything works well EXCEPT:

  cannot auto zoom and scroll with the touch ring.

  Seen a comment that if you change the medium to fast speed it resolves, but it didn't for me.

  Wacom said not their problem.

  any help would be appreciated. Thank you!

  Hi blake,.

  I've updated to the same today for an intuos wacom drivers 4 on a windows7 pc and experienced the same issues.  zoom features do not work after installation.  My current workaround is to manually set the option of high touch ring - the default autoscroll/zoom - like this:

  

  (1) choose 'hits... ". "instead of scrolling auto/zoom or zoom even

  (2) in the box 'set the strikes' enter by default photoshop for zoom shortcut keys (ctrl +), which can appear as ' {ctrl} =' and zoom out (ctrl) - after typing the.

  I can confirm that allows the zoom to work for me in version ch cc 2015.1.1 (20151209 r 327 x 64), I think this is the latest version as of today.  It is not as accurate as the wacom zoom used to be, because it has predefined interval of zoom factors, but at least it works.  I scroll the mouse so I apologize to not have a work around for this.  hope that gives you temporary workaround for the problem of zoom, at least.

  Good luck!

  oneguey

• Gallery of Photoshop filters work only not with the "Unable to complete the operation" error box for PS CS6, CC, CC14, CC15 in Yosemite Mac, is produced in the Chinese version

  Hi all

  All Photoshop CS6, CC, CC14 CC15 have been updated in the latest version today. But the latest patch still does not fix the bug.

  Photoshop (Chinese simplified and Chinese traditional), just goes to show error message "Could not complete the operation" every time I click on a gallery of filters option. The issue started happening Mac Yosemite 10.10.2. No question too with the Mac version before 10.10.2.

  Version on Windows, it is normal, not this issue. I also tried using another language version of Photoshop, like English, it is normal without any problems. I also asked my Korean friend to use the software in Korean, no question too with Gallery of filters. But when I changed the language in traditional Chinese or simplified Chinese, the Gallery of filters will suddenly be not work with error "Can not complete the operation". When I change Photoshop to the other language, it will run normally.

  
  

  Here is the screenshot to understand clearly what I mean. It is not gray, it is not an accident. No crash no report at all. It simply doesn't get it.
  

  

  

  

  The problem occurs in ANY kind of file, it is not the specific problem of files.

  Remove the preferences, running file at startup, new account admin, uninstaller + Running cleaning tool + reinstall again, everything that I have tried and it solve anything. Therefore, it is not the machine question or account number. It also happens to other Mac Yosemite as well. In the past, there was no question too (before 10.10.2).

  In the internet (the Chinese language forums), there are many users who are also reports on the same subject, but still no solution so far.

  
  

  Below link, there is also another Chinese user who reported the same issue, but no response (I think because there is no problem in the English version, so that the staff of Adobe don't know what exactly, we face to)
  

  PHOTOSHOP CC 2014 - Chinese version traditional to the function of filter Gallery, unable to work on MAC OSX 10.10.2

  It is without doubt a BUG!

  
  

  I don't know the reason to find Mac Yosemite or because of defects in Photoshop. However, please solve the problem as soon as POSSIBLE because not all customers can understand English, especially us who comes from countries whose inhabitants do not speak English.

  * Sorry for the bad English, I spent hours just to write this post

  Hi all

  There is a patch to update to solve this problem

  http://blogs.Adobe.com/Crawlspace/2015/08/Photoshop-CC-2015-0-1-update-now-available.html

  I installed the update patch, and the problem is fixed in Photoshop CC2015 for Chinese version traditional & Chinese simplified.

  But the update patch is only for the PS CC2015 version, which means the question always remains CS6 and CC CC2014.

  At least, you can use your Chinese version of CC2015 first.

  However, when I tried to manipulate the dat inside Photoshop CC15 file and use it in CC14, my filters CC14 Gallery can also work now. And it can also solve the problem in CC PS too

• Connection works only not with the PlayBar activated

  I am using the branching feature in Captivate 5.5.  I use the reading bar control to allow users to navigate through the course.  Each slide is configured with a click box to pause the slide, forcing users to click on the next button on the playback bar to scroll through the course.

  The ramification of the feature cannot be used with the automatic navigation (timed navigation)?  I really hope I'm missing something simple just to allow the connection to work properly.  Currently, the logic of branch is completely ignored I click in the course.

  I am using Captivate 5.5; Windows XP SP3; THAT IS TO SAY 8

  Thank you

  Jay

  The ramification is on interactivity. So she requires that the user is interacting with the course somehow and that it not be a variety of responses required under what they do.

  If you are using either the interactive objects (click boxes, buttons, text input boxes) that allow the user to make decisions about what direction to take, or else you have advanced conditional actions implemented which are triggered by events drag enter who choose branching based on certain criteria (for example scenarios (, who glides the user saw, or quiz question scores etc.).

  If you just use the PlayBar buttons, these are going only to the break, play, rewind, move to the next or a slide backward.  These don't really give you options of branches because they just move things in a linear way.  You need to design interactive options that create "fork in the road" in some way.

• Problem with the connection works only not with the caterers

  I have a weird problem with logging, and perhaps someone here can point me in the right direction to watch. I have install a FileHandler customized for different newspapers. He worked for a few years. Now it no longer works. Nothing is found in the log file even if it is created.
  
  I have narrowed it down to there's a change in the JVM. If I run application under JDK 1.6.0_05 (what I had in production), it works. If I run the current JDK 1.6.0_22 application, it does not. This is on Solaris 10 and the only change I make is to change the symbolic link 'later' in ' / usr/jdk "to a JDK version or the other. It is reproducible 100% of the time. Use the old JDK and it works, use the JDK again and it's not.
  
  I'm at a loss as to what could be wrong.
  
  Here is the code which implements the Manager and associate it with the newspaper:
  
  Recorder L = Logger.getLogger (loggerName);
  If (null! = level) {}
  l.setLevel (level);
  }
  System.out.println ("logger level is" + l.getLevel ());
  If (null! = useParentHandlers) {}
  l.setUseParentHandlers (useParentHandlers);
  }
  String loggerPattern = logDir + reason;
  Manager: new = FileHandler (loggerPattern, limit, count, append);
  h.setLevel (Level.ALL);
  Formatter F = new UniformLogFormatter();
  h.setFormatter (f);
  l.addHandler (h);
  Logger.info ("FileHandler added [" + loggerPattern + ",]" + limit + "," + count + "," + add + "] for logger:" + loggerName);
  l.info ("open log file");
  
  I see the 'open log file' but never to see any other message of the breast journal. The "server.log" sees the messages, however.
  
  Any help will be greatly appreciated.
  
  Brett

  At one point, the internals of the LogManager/writer classes have been modified so that they maintain WeakReferences for child loggers. My guess is that your code is not keep a hard reference to the logger which you set up and it becomes garbage collector more later in time (and so do not have all future messages).

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.