4730 proBook s: Standard VGA Graphics Adapter and Base system device drivers
Hello, I have a problem with my device manager. I need to fix or update/install drivers for a Standard VGA Graphics Adapter and Base system device drivers. I can't find anything useful, I please help.
Best regards
Hello:
You need this driver for the card reader (base system device).
In order to provide the correct graphic driver, I need to know if your laptop's graphics card Intel or AMD/Intel switchable graphics.
If there is just a standard vga card listed, then you probably need just the driver intel graphics.
If there are two adapters listed standard vga, so you need this driver.
Tags: Notebooks
Similar Questions
-
missing coprocessor and base system device drivers SM bus controller
Hello
I recently formatted my notebook compaq presario v3749au without the recovery disks, because my cd drive does not work. When I saw in the Device Manager, it says that 'sm bus controller, coprocessor and base system device' drivers are missing. I don't know where to put them because these drivers are not available on the hp site. so kindly respond if anyone knows how to find the solution.
Thank you
Hello:
Here are links to the drivers you need...
This should install it the first 2.
For the 1180
-
HP ProBook 6470 unknown peripheral b and Base system device drivers needed
Hello
I found a thread discussing this specific topic, but the link to the drivers died. Could I please have the updated links to these drivers?
I also need the driver for HP hs2350 HSPA + MobileBroadBand.
Hello:
You need this driver for the BSD:
You probably need this driver for the unknown dev:
This is the driver for the WWAN card:
-
I have the same problem as this guy asks. However, the file that is provided by the answer has been damaged. If this file can be reuploaded correctly, that would be appreciated. I know this is quite old but I want to solve this problem. If there is a new solution, it would be also greatly appreciated.
Thanks for your help!
Hello:
Because it is the switchable graphics of amd/intel driver, it's the only one you can use.
It's a custom driver and it's the only one that works on your laptop.
If you download the file, use 7 - zip to unpack in the folder and run the file setup.exe from there.
-
An another Standard VGA Graphics Adapter problem (dv6-3000)
Model: HP Pavilion dv6-3000so
Series: {information}
Product: WR224EA #UUW
System: Windows 7, x 64
Driver VGA: ATI Mobility Radeon HD 4200 Series already installed
-> lack of Standard VGA Graphics Adapter driver
error code - 10
installed the old one (2006.06.21) Microsoft (version 6.1.7600.16385)
Hello:
I don't know a lot about the switchable graphics, but let's try something.
I'm afraid that if you run the complete driver package, it can destroy the installation driver for HD 5xxx series.
Then, try this...
Download driver AMD support page and the driver of your laptop. Do not run it.
Use the free 7-zip files extraction utility to extract the driver to a folder.
Link to 7 - zip below.
http://7-zip.org/download.html
After you let 7-Zip extract the .exe file to a folder, go to the Device Manager and click on your device ATI 4200 problem. Click the driver tab. Click on set to update driver. Select Browse my computer for the software method and find the 7-zip folder extracted.
Make sure that the include subfolders is selected and hopfully the driver install and not tear your discrete HD 5xxx video card.
I'm not the one who works the HDMI out port. Only one of them would be, I think.
-
I have a Dell Precision M90 laptop and recently upgraded to Vista 32 bit to 64 bit Windows 7. Everything worked perfectly, except for my display drivers. Windows 7 installed a driver called Standard VGA Graphics Adapter. This driver has a very low resolutions only and cannot deal with games or same Aero.
I had an experience with updated video drivers with Vista. My graphics card is a NVIDIA Quadro FX 2500 M. When I had Vista there is no Vista compatible driver for this card, so I used the Geforce 7900GTX driver (which is inspired by the FX 2500 M) and it worked fine. Of course, the Quadro FX 2500 M doesn't have a driver compatible windows 7.
I downloaded the driver for the 64 - bit Windows 7 Geforce 7 series so I could upgrade and use, however when I used the NVIDIA installer it says that my computer has no compatible hardware for this driver (I tried to install it in Vista compatibility as well). I tried to force the upgrade by using the option "have disk" and choosing the .inf directly file. This did not always and said that he could not work because "the selected driver for this device does not support this version of Windows" even if it is the version of Windows 7.
I also tried to start my computer in safe mode, uninstall the VGA Standard driver and then install the driver NVIDIA, but it does not work either.
Sorry for the long post, I just wanted to add as much information as possible I hope to solve this problem. Thank you for taking a look and thanks for your suggestions!
Fixed! Finally! Dell.com took the pilot... but the link that they had posted on the page of Precision M90 was mislabeled. I tried another way, found the good pilot, and got, it works. Solved the days and days of frusturation.
-
HP ProBook s 4730: lack of Base system device drivers
Hello world!
A few days ago I received an error message that my device Base and an unidentified device system no longer have the drivers installed for them (Code 28). This can happen after my last update of Windows, but I'm not too sure. When I try to update the drivers of the device for each Device Manager, Windows cannot find a driver for the device.
These are devices that are affected (not sure if you need the hardware ID, but I included them):Base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
Unidentified device
USB\VID_138A & PID_003C & REV_0086
USB\VID_138A & PID_003C
Don't know if it is also related, but my Standard VGA Graphics Adapter is also having similar problem and cannot start (Code 10):PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C & REV_00
PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C
PCI\VEN_1002 & DEV_6760 & CC_030000
PCI\VEN_1002 & DEV_6760 & CC_0300
I use Windows 7 Home Premium (64-bit).
I saw that I can download the drivers from the HP site, but I'm not really sure which ones do I need to download. Some people recommend that you download the chipset, the audio media and network card drivers for my laptop to try to solve the problem.I can compare the drivers with the names of device in Device Manager, if that's the best way to go about it. I wanted to just a few tips on the best thing to do.
I have some knowledge of the software, but I don't mess with hardware very much, answers in layman's terms would be greatly appreciated!
Thanks for your time. If you need some info on my ProBook, let me know.Hello:
You need these drivers...
Base system device:
The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe
Unidentified device:
This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.
FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59624.exe
Standard VGA Graphics adapt:
This package provides the AMD video drivers, driver audio Control Panel and HD for laptops taken in charge who are running a supported operating system.
-
Display the adapter set to Standard VGA Graphics Adapter on Aspire AX3950
Hello
I have an Aspire AX3950 supplied with Windows 7 Home. I had to recreate the image on the computer to Windows 7 Professional so I could install Visual Studio 2013. I got my MSDN subscription software.
After successfully reimage the computer, the system only recognizes one of my monitors. It worked correctly with the same two monitors before updating windows. I checked the graphics card and it shows "Standard VGA Graphics Adaper". It was my mistake of not checking the adapter before the system update. From what I found on the internet this AX3950 has a graphic card coupled with the motherboard. My question is, how do I get the original graphics card working again?
drivers can be found here:
http://us.Acer.com/AC/en/us/content/drivers/2187;-; Longs % 20 X 3950
What is your VGA, click twice on the standard VGA adapter on Device Manager, select the tab "details" in the menu drop down choose 'hardwareIDs', select the first channel, copy and paste in google and see if it is Intel, nvidia or ATI.
Then select the proper drivers from the link above.
-
HP ProBook 4540 s missing device unknown and base system device
Hello
HP probook 4540 s [Nr Windows 7 (64-bit) ultimate H5J79EA #ABV]...
1 base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_17F6103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
Base-2 system device
PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C & REV_30
PCI\VEN_197B & DEV_2393 & SUBSYS_17F6103C
PCI\VEN_197B & DEV_2393 & CC_088000
PCI\VEN_197B & DEV_2393 & CC_0880
3 - Bluetooth controller
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11
4 Ethernet Controller
PCI\VEN_10EC & DEV_8168 & SUBSYS_17F6103C & REV_07
PCI\VEN_10EC & DEV_8168 & SUBSYS_17F6103C
PCI\VEN_10EC & DEV_8168 & CC_020000
PCI\VEN_10EC & DEV_8168 & CC_0200
5 - unknown device
ACPI\HPQ6000
* HPQ6000
Ethernet:
Bluetooth:
-
Laptop HP ProBook s 4540: lack of Base system device drivers
Hello
Currently, I have a laptop HP ProBook 4540 s notebook PC (Energy Star) and found that my Base system device driversare missing. I have tried very hard to find, but in vain. Honestly, I don't even know not what they are or what they do, but I'm sure that I need them. Please help me if possible.
PS This is my first question and sorry if the format is confused or lack of useful information. If there is a better way to format this issue please inform me and I wil try to do better next time.
Hello
Try:
JMicron card reader Driver
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63637.exe
If it fails, set the hardware ID.
-
HP ProBook 6450 b Notebook PC: no installed Base system device
Hello
After a new installation of Windows 7 Professional 32 bit on an HP Probook 6560 b I have the following problems with these devices:
Base system device - PCI Slot 2 (bus PCI 67, device 0, function 1)
Base system device - PCI Slot 2 (bus PCI 67, device 0, function 2)
Concerning
Erik
Hi Erik,
Try the driver from the link card reader
http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173643&swItemId=ob_79991_1&swEnvOid=4052
Kind regards
DP - K
-
4050 proBook s: 10 4540 windows upgrade s base system device
I did an upgrade of windows 10 and got two bangs of pilot.
base system device
SD/mmc host controller
MS host controller
help please
Hello:
You need this driver...
-
HP Pavilion dv7-3190em problems with volume band and "base system device" in Device Manager
Hello
I just installed Win 7 (64-bit) and my volume control does not work properly. It does not turn the sound up and down, but the blue band is not displayed on the screen.
In addition, I seem to have a device or devices for which there is no drivers apparently. They are listed as "base system device" x 3 in Device Manager and "unknown device" x 1.
Thanks for any help.
Good Hoga
Hello
bonhoga wrote:
Now, I just need to take care of the volume Strip.
Download and install:
MediaSmart SmartMenu here (version 3.1.2.2 for 32/64-bit Win7)
Before installing this software, that you must have installed at least a MediaSmart package software. The best choice will be in my opinion:
MediaSmart DVD here (version 4.1.4328 for 32/64-bit Win7)
If you do not use any additional software you can use another product that is:
3VRX here (version 2.5 for 32/64-bit Win7)
Note:
Here is YouTube video that shows what can be done with the 3VRX software.
-
Coprocessor and base system device
I had to wipe this laptop and completely it reboot as I got it from a friend and it has completely taken over by virus impossible to use. I decided to get back in the State but in Device Manager it shows that I have a question about three things two exhibition device system of Base and the other as a coprocessor.
The first Base system device.
type of device device Base System general manufacturer unknown unknown
Slot 5 PCI bus, device 9, function 2
State of the device drivers for this device are not installed. (Code 28)
Hardware ID
PCI VEN_1180 & DEV_0834 & SUBSYS_30B5103C & REV_01
PCI VEN_1180 & DEV_0834 & SUBSYS_30B5103C
PCI VEN_1180 & DEV_0834 & CC_088000
PCI VEN_1180 & DEV_0834 & CC_0880
second base system
type another unknown devices manufacturer device general base system device
Slot 5 PCI bus, device 9, function 3
Hardware ID
PCI VEN_1180 & DEV_0592 & SUBSYS_30B5103C & REV_0A
PCI VEN_1180 & DEV_0592 & SUBSYS_30B5103C
PCI VEN_1180 & DEV_0592 & CC_088000
PCI VEN_1180 & DEV_0592 & CC_0880
coprocessor
Coprocessor device general type unknown manufacturer
unknown location PCI bus 0, device 10, function 3
Hardware ID
PCI\VEN_10DE & DEV_0271 & SUBSYS_30B5103C & REV_A3
PCI\VEN_10DE & DEV_0271 & SUBSYS_30B5103C
PCI\VEN_10DE & DEV_0271 & CC_0B4000
PCI\VEN_10DE & DEV_0271 & CC_0B40
If someone could help me determine the appropriate drivers for these devices, it would be greatly appreciated. Thanks a lot for your help.
Hello
1 Ricoh card reader and 2:
http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46999.exe
3 Nvidia chipset
FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34370.exe
Concerning
-
HP Probook 6470 b unknown device and necessary Base system device drivers
In Device Manager, I have an unknown device with a hardware ID's of
ACPI\HPQ6000
* HPQ6000
And I'm unable to determine the correct driver for it. I have the same problem for a device Base system with the hardware according to ID's
PCI\VEN_197B & DEV_2392 & SUBSYS_179B103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_179B103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
Any help would be greatly appreciated.
Try this
HP 3D DriveGuard 5:
and
Maybe you are looking for
-
can I put one or more lists of group within another group list?
I have not yet thunderbird?
-
Windows Installer: keeps flashing on the screen & several times by train to disappear?
There is a small window that is popping up continuously throughout the day. I can't even click on 'Cancel' it disappears so fast & then reappears. She's almost schizophrenic! He'll stop for a small period & then start again. I don't know what to
-
His seed and start-up and start-up...
Hello. My new Z3 is booting * really * often. On its own, of course. Diagnosis is up to 167 that it recharges in just 2 days! Imagine. Opportunities are imprecise, unfortunately. My favorite so far: Wipe to unlock on start-online reboot screen! Any i
-
1102 thanks to eprint paper type selection
Hello I use a Laserjet 1102w and print DHL labels with it. It works so far but the barcodes are completely down to the leaf and sometimes numbers to go outside of the size of the paper. Is it possible to specify the size of paper (standard) when you
-
How can I get the operating system?
My computer broke down the month last because of the material. And I had hardware replaced, but I also lost the operating system. I bought my computer in Toronto last year, but I live in China now, so I transferred to China. The computer is still und