4K on 1080 Premiere Pro CS6 timeline

Similar Questions

• How to add video effects to images in the timeline in Adobe Premiere Pro CS6?

  Hello

  Can anyone help me please with the following? I use Adobe Premiere Pro CS6, and I have a sequence of images which I imported it in video editing. I want to apply the effect 'Chained' to all the images, but I'm not able to add the effect to all images at once? I can do one at a time without problem, but it is of course very time consuming when it comes to the thousands of images.

  I've tried highlighting all and CTRL + C, CTRL + V with no luck. Any help would be appreciated, thank you very much.

  Before putting pictures on the timeline, use "Automate to sequence" with the cross dissolve as the default transition. Cross dissolve is not an effect, but a transition.

• Why can not see the waveform audio timeline on sequences inside another sequence in Premiere Pro CS6? Can I fix?

  Anyone know why I can't see the waveform audio timeline on sequences inside another sequence in Premiere Pro CS6? Can I fix?

  Hit the Audio rendering.

• Premiere Pro CS6 foreclosure timeline - what is the significance of the blue shaded area?

  

  A new feature has been added by one of the recent updates to Premiere Pro CS6? Behind the numbers in the scale bar of time in the upper part of the timeline window is a movable blue shaded area that can be expanded or contracted (the cursor changes to a red check mark). I've highlighted in the red box in the picture as an attachment.

  This mean? I can't find anything online or in the classroom in a book! Do not do something obvious I can say and it makes me nuts trying to get out! (It's late and I'm a little more tired). Help, I want to sleep :-)

  If you mean the blue greenish below is the result of setting a point (or both).

  

  Just hold the Alt or Option key while clicking on as buttons. It will go away.

  Edit: I see that you added the image after reading your post. So yes, it is the result of the marking of points and output.

• Strange audio problem in Premiere Pro CS6

  Hello

  I encountered a very strange problem. I am changing a documentary film in Premiere Pro. All the material was shot on the Sony FS 100 camera - imported in PP with the media browser. In an interview, the last part of a clamp has corrupted audio. At some point on the timeline audio stops playing, and it looks like a scratch on a disc vinyl - two words that are repeated at the end of the clip (see screenshot of chronology). The images are as it should. When I open the clip of Avchd source in VLC the audio works. When I import the clip in Final Cut 7 using the Log and transfer the audio works. My only other option would be that there is a problem of software with Premiere Pro CS6. Any ideas how to solve this problem?

  

  PP version: 6.0.1

  Source of images: AVCHD, MPEG-4 (1080/25 p - Sony FS100)

  Mac version: OS x 10.8

  Model name: Mac Pro mid-2010

  Processor name: Intel Quad - Core Xeon

  Processor speed: 2.4 GHz

  Number of processors: 2

  Total number of cores: 8

  Memory: 20 GB

  Graphics card: NVIDIA GeForce GTX 570

  Third IO: Matrox MXO2 with Max

  Mercury playback engine: Mode of software

  A similar problem, potential, which can develop, is when the standard compliant process is interrupted before completing 100%.

  A quick way to exclude this possibility, would be to browse media Cache files and delete the CFA and the PEK (waveform display) for this Clip, outside of Premiere Pro. Then, when you launch PrPro and open your project, the program will recreate both of these files. There are a small progress bar, that many do not notice. Let him finish 100%, before even touching the computer. Test.

  I hope it's as simple as that.

  Good luck

  Hunt

• GPU does not work on EL Capitan - filling of Premiere Pro CS6

  Graphic driver on EL Capitan is not as powerful as the previous OS Yosemite. Premiere Pro CS6 used to work flawlessly on Yosemite. He hangs up and creates a delay in action by the user in Premiere Pro under EL Capitan. When scrolling in timeline, the timeline bar continues to operate in a random direction and is not accurate for where is the mouse. Kindly communicated respective updates to fix this bug.

  Bertrand says:

  Graphic driver on EL Capitan is not as powerful as the previous OS Yosemite. Premiere Pro CS6 used to work flawlessly on Yosemite. He hangs up and creates a delay in action by the user in Premiere Pro under EL Capitan. When scrolling in timeline, the timeline bar continues to operate in a random direction and is not accurate for where is the mouse. Kindly communicated respective updates to fix this bug.

  This is a user forum, you talk to other users like you, no Apple or the manufacturer of your GPU - which is, moreover, you neglected to specify in your message.

  When you post should give specific information - in this case, your mac model, and especially what GPU it uses.

  Some Macs have discreet GPU NVIDIA or AMD, some only the integrated Intel GPU.

  If your GPU is you can go to their site and update the driver of NVIDIA CUDA. Who can help, because, as far as I KNOW, first would take advantage of CUDA.

  You can find out what GPU your mac uses ranging from the Apple, choosing about this Mac menu and then clicking on "views".

  Here's what it shows in my mac:

  

• How to record my videos from my DSLR camera to Adobe Premiere Pro CS6 when it does not give me the option?

  I have Adobe Premiere Pro CS6 and I shoot my videos with a digital SLR camera.  But when I go in the sequence settings, it doesn't give me the option of DSLR.  Is there another setting that will work?  Someone please help!

  Different DSLR have different outputs for the size of the image, frequency of frames, progressive or interlaced... what you need to do in CS6, is create a preset for the output of your camera, setting the pace (23.976, 25, 29.97 or what tempo you're shooting to), - size of 1920 x 1080, 1280 x 720 image, no matter what you shoot and for progressive or interlaced Once again, what you shoot at. Then you can just select in the list each time.

  Neil

• Premiere Pro cs6 - video pane of the workspace remains empty when you try to view the imported files

  Hello

  I am currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it into the timeline, the preview area where you can review your cup video remains black. Double-click the imported file gives the same result. I was initially import files .jpg (about 300 KB of size for each) so I tried to import various other image formats - .png, .tiff, etc... I even imported a my scene movie file to determine if the problem was with my format of content. With video, the audio plays fine, but the video remains empty in the preview area. I tried rendering my workspace and change my initial parameters of the project, but to no avail. I went to my preferences for first and far as I know, everything seems fine.

  I use the software on a HP Pavilion, Windows 7 intel core i7, 8 GB of ram with a 2 GB of 650 M from nvidia card. Any help would be greatly appreciated. Thank you!

  Hello

  Have you tried to change your Video Renderer? It would be under the project > project settings > general. Switch option only the Mercury playback engine software and see if it helps.

  Thank you

  Regalo

• Import of images classified to Premiere Pro CS6

  I'm trying to correct/color grade my clips. I sent it to Speedgrade by Premiere Pro (CS6) but after having rendered out as a DPX, and try resending to Premiere Pro (DPX image sequence), not all of the classified clips were there. (Clip is 04:40 min) but only 01:39 min is what was imported back to Premiere Pro.

  I found occasionally that I tried to export and don't take that dialog box export thought I have tried only to export something highlighted, or if another setting for "selected area. I think you have run against something similar... or a box that has been verified that don't is not yet aware was there. As I try (for the first time in a year) export an EDL from PrPro to Sg I had to decipher something like three different places, both programs have tried to help me before I could get the EDL breath and images both imported in the same timeline of Sg.

  As an alternative to DPX it is of course two different EDL processes... one where you export just a NOD and then after you have created your Sg project, go to the via media of the Sg Panel, drag it to the timeline, then the media group to navigate to the folder containing your clips, and then use the 'load from desktop' option to fill your timeline.

  The others... export you the EDL and the order of the timeline and then put one on the new calendar of the Sg project, drag one on top. It takes a little more time to make the export of PrPro of images that are probably not necessary most of the time.

  I have just set up the Forum an explanation how to do that with progressive pictures and avoid the hiccups, both programs can throw at you. The first of... If all your media in one folder-tree... is very fast & easy. EDL export is almost instantaneous, and clips of top loading just bango... now, I used to have problems to export by moments (made) a chronology of Sg. I don't know if an EDL process can work sending back to PrPro ranking, I think you would have to return on. But a lot of people who have done all the time without problems.

  Neil

• Export of media in Premiere Pro CS6 ONLY produces an Audio file in Media Encoder

  First of all, all the System Info:

  Windows 7 Home Premium Service Pack 1

  Intel HD Graphics 3000 graphics card

  I use the first Pro CS6 Version 6.0.5 (001 (MC: 264587)) «Mighty Kilt»

  Version 6.0.3.1 (64-bit) Adobe Media Encoder cs6

  Other Adobe applications: AIR, creative cloud, Download Assistant, Encore CS6 Library, 12 ActiveX of Flash Player, Flash Player Plugin from 12, Manager help, Premiere Pro CS6, Premiere Pro CS6 functional Content, reader XI

  I ran on Premiere Pro and Media Encoder updates and everything is up-to-date

  I produce a two disc double layer DVD for 100 families of my sons of fanfare.

  I have half an hour "masterpiece" of interviews, segments of performance, rehearsal sequences, credits, etc. that I edited complete set with sound, etc.

  I also have various other video segments of the season, a high quality (1920 x 1080) and a decline in quality.

  Rather than import in yet and have yet to transcode all the same quality, I wanted to make sure the piece of half an hour and some other segments were transcoded in highest possible quality and given the large size of the files that I could and then transcode other segments at lower levels of quality as it is necessary so all the space on the disks.

  The company I use to duplicate/replicate the 100 DVDs of my DVD Master advised me to encode them FIRST in Premiere Pro as you wish and THEN import these files into yet.

  I used Adobe Media encode a lot to export the individual segments in the files, I could upload it to Youtube and have had no problems for several months.

  But now, two things happen:

  (1) SOUL automatically designates the file 'exit' with an extension .aac (see table)

  (2) when I do a file "import under" soul encoded in still won't load an audio file (obviously)

  Huh?

  Here are the settings I use in my export media dialog in Premiere Pro CS6:

  Format: MPEG2-DVD

  Screening: NTSC widescreen high quality

  Out of name (and the file type): _ name with like kind of video Files (*.mpg) «»

  Boxes to "Export video" so much "Export Audio" is checked (see attached screen print)

  The filters tab: on the left as is, don't do anything here

  Multiplexer tab:

  • Click on the button "DVD" (vs. the "None" button)
  • Bitrate type: left as Variable that matches what is selected by default

  Video tab:

  • Codec: Reads MainConcept MPEG video
  • Quality: increase it up to 5
  • TV standard: NTSC
  • Frame rate: 29.97
  • Field order: no (progressive)
  • Pixel Aspect ratio: screen 16:9 wide
  • Go to maximum depth box checked
  • Encoding Bitrate: I choose CBR for my high quality segments and VBR 2 pass for my segments of lower quality
  • Bitrate: kick up to max to high quality segments, adjust as required to obtain the size of the file that I want for my lower segments of quality

  Audio tab:

  • Audio format: Dolby Digital
  • Codec: Dolby Digital
  • Bitrate: 320 at least, sometimes higher for segments, I want to be the highest quality

  I check the box of "quality to make Maximum usage.

  I chose 'Tail' for everything and then let it run all night

  And Yes, the original media has TWO a video track and audio track that works (see screenshot)

  So... What am I doing wrong, useful experts?

  A - ha! MPEG2 export formats missing in the SOUL is the key to the riddle. You have a license problem, possibly the one discussed here: http://forums.adobe.com/message/4401451.

  I'm not familiar with this issue and has not taken the time to read the pages that links Todd to-instead, I wanted to get the link for you as soon as POSSIBLE. If you have a problem directly solving the problem, I see two immediate options: 1) encode "in-process" by Premiere Pro by clicking 'Export' in the dialog box export settings (as opposed to the queue, which of course sends the job of the SOUL), or 2) to install the trial version of CC (aka 7.x).

• Picture in Picture - Premiere Pro CS6

  Hello

  The installation program:

  I have a recorded video that was recorded using Xsplit.  I had 2 video sources, we have a webcam recording me, the other was a screenshot of my desktop area.  Basically, the video is talking to me and read things on the screen in the background.  Webcam recording is in the foreground (lower right corner of the video) and the screenshot of office is in the background taking up the rest of the screen.

  Here's what I'm trying to do:

  During the video, I read a text from a page in the background. What I want to do is when I start reading the text, I want the text to "pop up" on the background page and more so that it can be more easily read, without changing or covering my webcam video in the lower right corner. Another way to say, I want a specific section of the video to zoom forward to get a close-up view of the text in the background, leaving the rest of the video to the size of the normal display.

  I know that you can split the video in Premiere Pro CS6 to a picture on top of the image, but when resizing this image that it only allows me to zoom in on something specific within the image video, it only resizes the entire image.

  Another solution would be for me to take a screencap of the frame that contains the text in the background.  Then take this screencap, Photoshop (image editing software) only flush the area I need, and then use this new image that contains only the text as a picture-in-picture/overaly.  However, I think that there should be a way to do that is not based on a separate program (i.e. by more than just Premiere Pro CS6).

  Help, please!   I hope that I have been descriptive enough, but do not hesitate to ask for clarification if necessary.

  Thank you

  Well, it turns out I was wrong. I can easily go up to 140% without problem.

  Here is a video showing a possibility. I made 12 seconds you would probably do in 30, but you should get the general idea.

  I used a static image of the screen and pasted a photo in the corner to represent a picture of the webcam. Everything I've done has been another copy of the text on the timeline for each section, I wanted to expand. I used the crop effect to isolate the text. (Actually a third party feathers harvest but I ended up not he degraded after all.) I turned then the opacity of the copy down to 0% until I needed to 100% using hold keyframes so that he'd jump at the same time upward instead of gradually.

  Then I used keyframes on the control of the brightness & contrast for off gradually the background on 15 images.

  I then put on the scale the text to 140% and he repositioned in the Center. After a little time to read the text that I returned it to its place and a picture later, I set the opacity to 0%.

  I repeated with the second copy.

  If I gave it a little more thought I could have played with the levels to obscure the enlarged a little text. But I'll leave a bit for you to try.

  It took more time to understand what I wanted to do than actually do.

  The scenario looks like this.

  

• Adobe Premiere Pro CS6 reading video problem/Bug

  I was editing a video for the past few weeks, but recently, after that I've been editing for a few minutes, all of a sudden my video won't play in the playback window. When I hit the play button (or space bar) it nothing - it's all here. All the clips are rendered (with the green bar), but I don't see my changes because it does not play. I even be able to move the slider along the timeline and it will show the video in the playback window, but it will not play back in real time. As I said, I have been using Premiere Pro CS6 for some time and did not have this problem so far. Also, when I drag a clip in the preview window, it does not either (but I am able to move the slider along the timeline). I must stop first and open it again, then he still works for a few minutes, and then the same problem occurs. Help, please! The specs for my lap top are the following: Macbook Pro Retina Display, i7 clocked at 2.6 GHZ, 16 GB RAM, 500GB SSD

  I found the problem. And a solution to the problem.

  I can change on first Pro 6 files, but after a dozen strikes, the SPACEBAR and keys stop working while the save cursor work work

• Premiere Pro CS6 - Multicam is BROKEN! vs FCPX, FCP7 (Final Cut Pro), Avid, Sony Vegas

  If you plan to spend in FCP7, FCPX, Avid or another edition of Premiere Pro CS6 program, there are SEVERAL good reasons to do so, HOWEVER, if you deal with the edition of several cameras (multicam) so you think twice, until this problem is resolved.

  How to edit in Adobe Premiere Pro CS6 multicam? What is the best program editing for mulitcam or multiple camera editing? - The answer, as long as the question below is fixed, isn't Adobe Premiere Pro! From CS6 (version 6.0.2), this lack of 'design' or the 'weirdness' described below, multicam editing is very difficult and inefficient in Premiere Pro. These first two issues above are what I searched Google in hopes of a solution to a problem plaguing Adobe Premiere Pro for years, literally. Unfortunately, in the new Premiere CS6, with so many other great innovations, the question remains still makes it very difficult to do an editing multicam compared to Final Cut Pro 7, Avid, Sony Vegas, FCPX, etc.. They all handle editing multicamera in different ways but, having recently passed away from FCP7, and has worked on several modifications mulitcam, Premiere Pro CS6 (and CS5 and CS5.5) has serious problems with the multicam function that is broken right now (version 6.0.2) in first CS6 and fact editing multicam VERY frustrating experience and a lot less effective compared to the other NLE. If it's a drawing, then its imperfect as Yes, you can work around it and difficulty about what you did, but why so you have to keep wasting time precious 'fixing' in such things? All is not supposed.

  
  

  The question:

  Hit the button of the SPACEBAR or pause or stop during a multicam editing actually stop the edit, made a cut in your timeline (chronology) and then will be another camera (angle or shot), if you want only it or not!

  This issue was known by Adobe for more than two years, but they push aside, call a quirk of design and ultimately avoid such question stated in this thread of attachment: http://forums.Adobe.com/thread/738084?start=0 & tstart = 0

  Make cuts and put the angles on you when you simply to pause or stop playback is a huge problem of having your editing program. If this were happening in the normal timeline, so I'm guessing it would have been fixed, but it has not been fixed and it causes the editor to have to go back and remove unintended cuts and back shots where they should be. The PAUSE button should only SUSPEND or STOP playback, as it does in other programs. But in the first he stops, make a cut in your timeline and then switches to the first angle or shot you started with if you want or not. There is no way to prevent this at the moment on CS6. The other thread that talks about the question refers to the fact that the "question doesn't have the numbers" to make it a priority to be fixed and there are other "larger issues" that need to be corrected first, which makes me wonder if Adobe really listen to the comments of the user. I mean, 2 years, people complain about that and not of miracle. Their response was 'add to wish list' or ' this isn't a bug, it's a quirk, then do an requested feature"or"its designed that way." Designed like that? Who would really want it like that? No other NLE does this and for good reason. If the pause button pause just reading and that's it, do you think there would be a thread for a period of 2 years on how to hit pause "should also make an incision in the timeline and move from the shots? I doubt it. Its a defaultdesign. I feel strange asking the feature 'Please take the pause break button' or 'Please make the stop button to stop playback. Looks like its brokenness, to me.

  If the robot multicam is a major objective for the team Adobe Premiere, go ahead, which I think it is, then please start by making even the basic works work as one would expect to BREAK = PAUSE. STOP = STOP. Phew! It was difficult. Fact. Fixed. Travel! Currently, this design is counterproductive, not intuitive, helps no one and only lost valuable time while the Publisher must quickly "solve" the problem.
  

  Well, I thought I'd do two things here:

  (1) start a thread with as many keywords as possible so that this "numbers" question in this forum and in Google searches. I hope that soon when you google 'First multicam Pro' this will be the first topic on the first page. My hope is that I can put a nice 'RESOLVED' or 'FIXED' label on this thread, one day next (and I'll for sure!). If this is the case, it is a testament to the theory of wheel ran combined with a small web analytics.

  (2) do this a new thread, rather than continue in the old thread because it is time to ask a new question: how long will it take for Adobe a problem when its design is essentially broken causing users to have to do a 'fix' every time? At the moment it happens two years! This isn't a feature request... his service broken in the first. A drawing... necessary. I can't listen to Adobe and they care about certain things, but how fast they act? This is my real question.

  I wonder if this thread has more "we have more important things to fix" or "is not that big of a problem" or "this isn't a problem at all, it's an oddity" or "you can just go back and correct the problem, whenever you have to stop because it takes only a few seconds' or 'its not broken its designed to be counter-productive and frustrating for users.  Time will tell. Well, if you do mulitcam changes as much as I do then these "seconds" are added. It is designed this way, and then Adobe, I ask you this question: If you hit pause on your TV remote button, and he stopped at the TV live, but also turned the volume all the way down and changed the channels... always so would you call that a quirk? It would be wise to design a remote control like that? I would say the key on your remote control does not work well and should be fixed. Yes, you could address it quickly by pressing the button "last" or "reminder" and then hit the volume up button, but shouldn't the key BREAK of your remote did exactly cela and only that: BREAK?

  Please respond... to apparently numbers.
  

  Have you tried what a user suggested earlier in the thread? Although it takes a little getting used to, it works for me perfectly.

  "Before to stop playback, press the 0 (zero) on the keyboard and then you can stop the game (with the SPACEBAR) without cutting in the timeline."

• Premiere Pro CS6 is no longer available?

  Hello

  I have a client who is willing to burn me a DVD of their marriage, and I wanted to use again. However, I noticed that he was not a part of the cloud creative and discovered that it's included with Premiere Pro CS6. I had it installed on my computer, but has not yet had for some reason any. So I uninstalled Premiere Pro CS6 my computer, just to see if I would get the opportunity to install even if I reinstalled Premiere Pro CS6. But now, when I look into the creative cloud app, I can not even find Premiere Pro CS6 to install. I looked under the tabs 'Previous Version' so much 'find additional Apps', and it is not found. I will not be able to install more the Premiere Pro CS6 on my computer? Any help I can get would be appreciated, since I still have some projects I used CS6 with.

  If you have a subscription for CC, then you also have the Premiere CS6 and again.

  How to find again:

  

• New Version of Creative Cloud Desktop App does not display preview Versions of Premiere Pro CS6

  As a user of CC I uninstalled Premiere Pro CS6 from my PC. But unfortunately, I wasn't aware that CS6 still got also uninstalled. Now my question: is it possible to reinstall. I know it's possible with the old version of the creative cloud under 'previous versions' desktop app, but I can't find Premiere Pro CS6 more in this list.

  [Please do not double post, another thread deleted by mod]