5.1 panner (Hockey Puck) not appearing is not despite a 5.1 master sequence

Similar Questions

• Parameters specified by step do not match the settings of the sequence

  I just upgraded from Teststand 4.1.1 to 4.2 and have encountered this

  problem during the review of the existing sequence files.

  When I open a file of sequence, select any stage of type sequence call, which calls another sous-séquence

  in a different sequence file, I learned that the parameters used do not correspond to those required.

  To be more precise, in the settings area of the stage, a red exclamation symbol appears at the side of the

  subsequence called step, and the ToolTip is displayed when the mouse pointer is

  hovered over the exclamation point States:

  "Parameters specified by the step do not match the settings of the sequence."

  The ToolTip goes on to explain how to solve this problem by clicking on the exclamation symbol.

  I find also that by deselecting the "Prototype using sequence" tab in step Settings\Module

  solves the problem.

  When the sequence is executed, no problems occur with execution, the test performs correctly.

  Is it possible to clear this error for each sequence call not in one operation?

  Thank you

  Gary.

  My apologies to attach a file of sequence buggy. I forgot to pass a parameter to the LoadPrototype method to preserve existing settings. I have attached a corrected version of the sequence file. I changed to update SequenceCall not only because of potential problems, reloading the DLL prototypes.

  I would try to explain why you see cela TestStand 4.2. The additional results feature, we added to TestStand 4.1 needs to know what parameters are entered, output and input/output (i.e. what settings is pass by reference). Before TestStand 4.1, step of calling sequence does not store this information but rather dynamically got it and it appears in the column how go. Now that we store the past by reference with the step option, you can have an inconsistency between the option stored in step and the current setting of the sequence called. This inconsistency affects only additional results and not execution. TestStand 4.1, the sequence editor to not warn you on these inconsistencies. We have added the TestStand 4.2 warning so that you will have the correct information for additional results.

  When TestStand 4.1 or 4.2 load a file of sequence from a pre-version 4.1 version, TestStand sets cervical optionally reference true for all parameters in the call sequence steps. This is why you see the warning for any sequence calling step created TestStand 3.5 If no parameters are not passing by reference. You can also see the problem if you change the option collar called a reference parameter in the sequence.

• Why the tool completely slice does NOT despite the fact that the layer is NOT locked, or 'Lock Slices' accidentally on is checked in the menu 'View' Illustrator CS6?

  Well want to can someone help pointing at me - why the tool cuts (for a simple in CS6 path) totally does NOT despite the fact that the layer is NOT locked, OR 'Lock Slices' accidentally on is checked in the menu 'View' Illustrator CS6?

  It is the slice tool you are trying. The only wrong.

  Use a knife or scissors.

• Easy-webprint ex: toolbar appears only not despite being "checked".

  I run Windows 7 64 bit and use Internet Explorer 9. Printer is MG8250

  A few weeks ago, I downloaded Easy-webprint EX version 1.3.5.0 and it worked fine. I could get the toolbar appear or disappear according to the normal procedure, IE via View/Toolbars and then checking or unchecking its inclusion on the list.

  Today, I decided to use it for the first time in several weeks. I went through the normal process to display the toolbar so that I could use the software but delayed it had no effect, or at least no visible effect on the screen.

  Then I tried to re - download the software, but the situation remained the same, that is to say, I can't do the toolbar to appear.

  Any ideas why the toolbar does not appear?

  I managed to make the toolbar appear as follows:

  -removed (checked) the Google toolbar and the Easy-web toolbar appeared magically in his place.

  -re - installed the Google toolbar and it appeared to the Easy-web (ticked off) toolbar

  I can now happily hide / view the Easy-web toolbar without the need to remove the Google toolbar.

  I still have no idea why I had this problem in the first place, but everything seems to go fine now

• Kiosk Folio appears does not despite the correct product id and account information

  Hi guys DPS.

  This question is always with all my apps. Despite the fact that I theTax and banking information updated on my itunes, I also have good product ID for questions about the producer of folio. All sheets I have published since the beginning of this year are no where on the newsstands.  My subscribers are to be deplored that the magazine, they paid for are not available for reading. I was in a deep *!

  Kindly help, which could be responsible for all sheets have been published is no do not appear on the newsstands.

  Here are the things I've done.

  -J' have the right product Id for the monthly folio on the producer of folio

  -J' I create each cover on newsstands

  -J' updated DPS on my mac

  -J' I updated the app to v32 and made compatible with iOS 8

  -I make sure that each magazine's cover date on the producer folio and the newsstand.

  -J' I do not publish and republish

  -J' sent notification of all magazine and yet they do not appear.

  -J' recreated the mobile configuration certificates for the magazine.

  Please I'm waiting for any requirement to help you investigate what might be responsible for the non appearance of all my folios on all my magazines with Adobe DPS.

  I await your urgent response.

  Thank you.

  BaraSolutions wrote:

  I have the right product Id for the monthly folio on the producer of folio.

  I have reviewed your account based on the name of the company, and I see some inconsistencies in the way in which you manage your product ID:

  1. you use the same product ID for your subscription as well as the different in-app purchases - a subscription product ID is different for an individual in-app purchase, you can not use the same one

  2 - most of your folios retail using the same product ID considering each sheet must have a identifier unique.

  You should review your app individual purchases in iTunes Connect. Make sure you have unique IDS for each edition you published.

  Once you have done this, update your publications with the correct ID. If you do not "renditions", your Folio producer should never lists the same product twice ID.

  Hope that helps.

• Why not my text on the master page appearing is not on a page of body?

  I'm working on 11 FM. I have a text box "this page intentionally left blank." on a mooring on a master page called blank Page. When I assign this master page to a page of body (using the master page), the headers and footer appear, but isn't my text "this page left blank.". How can I fix it?

  Is "this page intentionally left blank." as part of the main text (flow one) on the Master Page 'white '?

  If so, remove it and place it in a new block of background text on this page.

  Flow text on MPs does not appear on the pages of body.

• Strange green line appears on the bottom of the frame of sequences (NOT the ONLINE PREVIEW RAM)

  Hello!

  I've recently upgraded to AE CS5, after long use of CS3.  I came across a problem that I hope there, someone can help me with.  For one of my elements of film a green line (one pixel high) appears at the bottom of the frame.  The green line appears in the layer panel, so I'm not there with plug-ins display - only it's purest form.  When I open the file in QT on my Mac, the green line at the bottom of the image is not there.  This has not met with the CS3 version, and I'm lost for a solution.  I did some googling and found some users AVID talks about a similar problem and was related to the fields.  So I went to 'Interpret the film' and then removed the fields with 'Lower' first and the green line goes.  The problem with this work is about the film looks so poor.  This is a digital image file, and I wouldn't remove fields because there were not at first.

  I have attached a few screenshots of the images in QT and AE CS5 for you all to see the question.

  Has anyone encountered this problem?  Is this a known problem CS5?  Is it related to OS x 10.6.5?

  Any help, advice or advice is greatly appreciated!

  Thank you!

  

  

  There is nothing to fix, and it's not a bug. For MPEG of any sort, all dimensions must be multiples of 2. It is inherent to the work of compression. You can not have a high 219 px film and not have it be cropped or enlarged pixel, with all the negative sides. I assume that the file is in fact already 220px high, the only difference being that CS3 can interpret correctly flag Quicktime display area, considering that this happens not in CS5. Which could be considered to be a "bug", but because Apple does not provide a 64-bit Quicktime and Adobe had to reverse engineer things, who do you blame? Yet once, it is not really something wrong here. In fact, the same file read on another computer or in a setting different software player can expose the same question, even when working in CS3. So the only real 'fix' is to properly encode the file 218px or 220px high. And the fields do not belong in desktop images. Apart from EI the irregular line will also be visible no matter how AE only displays a field both internally. You will need to handle this correctly, even though you may not want to.

  Mylenium

• My client needs to change the text that appears on every page of his site, but in the edition browser is not make changes to the master page text. Is there a way for him to do? A special widget or something?

  He wants a place on the header of every page of his Web site where he can post his latest information in real time every day. If he had his way, it would look like a strip of tickets transiting via the header of each page. I was going to include it in the design of the master page header, so all that he would have to do is update the copy on the master and it would update the header of each page. But in the Assembly browser does not work on master pages.

  Is there a way to do this? Even if it's an a widget that has been done by another Member of the community of Muse?

  Thank you.

  By BC you can change the template or page that would change the display, but if the new site is updated to Muse then he would cancel the change.

  Thank you

  Sanjit

• I have a problem connecting on ebay if you use firefox, I get a message saying that the page does not not despite having cleared my cache and cookies.

  I have a problem connecting on ebay when you use firefox, it has been fine for years, but since a few days, I get a message saying that the page does not when I try to log in. I tried to clear my cookies and cache, but it makes no difference. This does not occur in google chrome and I can log on fine there so what's the problem with firefox?

  Do you also have this problem if you temporarily switch to private browsing mode?

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Select: [X] 'always use private browsing mode '.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  See also:

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-requrie-passwords

• CD ROM does not work because 2nd atapi master is not compatible

  When I turn on my laptop it appears on the error screen: 2nd master atapi incompatible.

  Windows xp professional comes up and try to use cd rom and it as disappeared from my computer and cannot even reinstall because no driver.

  If anyone can help with some basic advice would appreciate your help

  Hello

  Replace you the CD/DVD drive to another?
  In my opinion, this message because the drive supports bad master/slave settings and the BIOS can not find STRANGE.

  Have you tried to access the BIOS and to set the default settings? Please check if it is possible!

  In addition, I would recommend to remove the CD/DVD from the laptop drive. Start Notepad, and then start the Windows operating system.
  In this case, the OS should t recognize the ODD.
  Then stop the laptop and insert the disc again.
  After you have inserted and correctly installed the drive to boot up the laptop again.

  If all goes well after this procedure the BIOS recognize the drive again.

• HP wireless e-all-in-one B110: HP printer does not not despite all new inks and following the instructions any catch-up

  I followed all the advice given but nothing helped, including the one given on the printer itself, but I just cannot print from my Mac.  Scanning directly from the printer is good, but not from the computer. This problem started only today.

  More than 80 and can not think what else to do! Please can you help me? Thank you.

  Hi Sirodyam ,

  If the printer was working with the previous black cartridge, I think it's a problem with the black cartridge and it will need to be replaced, but I've provided a few steps more, you can try first. Check the date on the cartridge to make sure it is in warranty you have purchased. May be the oldest stock of cartridge.

  If you had the issue before replacing the black cartridge, you could clean the contacts on the cartridge and the vent. Also, make sure the tab on the cartridge. ' Incident affecting an ink cartridge: following print cartridges appear to be missing or corrupt "views for HP Photosmart more e-all-in-one printer series (B210). " Do not take into account the title.

  Here is a document to manually clean the print head. "Incompatible print head," 'Printhead missing or damaged,' or 'Print head problem' displays for HP Photosmart Wireless e-All-in-One Printer Series (B110). Do not take into account the title.

  I hope this helps.

  If you are still not able to print in black, call our technical support at the 800-474-6836 and inquire about a replacement cartridge please. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• TRIM does not not despite the AHCI mode and fsutil behavior query disabledeletenotify to return 0

  Hello

  I recently changed my motherboard to a gigabyte a ASRock x 79 Extreme9.

  After this of course being the new is configured to AHCI mode and update an existing installation of Win 7 x 64 drivers using the DVD provided by ASRock, I used trimcheck - 0.7.exe to check if the trim was working, and he's not. Trim was collaborating with the Gigabyte mobo.

  I made sure also that HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\ and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV starting value was 0, does not.

  Device Manager shows that my 2 SSD using a SCSI driver, which might be the source of the problem. I tried to update the driver automatically, but Windows kept existing ones, saying that he could not find better.

  No idea what is the problem and how to solve?

  Thank you.

  ASRock has suggested to do a new clean install W7, and it worked.

  Installation on the previous mobo was a unique one partition boot, and the new is a type of 3-partition GPT.

  TRIM was working on the previous mobo, but anyway when re-use of previous installation even with new pilots was not.

  So, it was a problem of Windows, but that appeared to require a clean install to fix.

• Why text will appear in different position when put in a sequence?

  CS6 first again. Can not know why when I create a text in the window title text does not appear in the same place when I fall into my sequence.

  Thank you. Keefer

  When you create a new title, that a dialog opens for you to name it, I think there is an option in this dialog to change the size. I'm not to my editor at the moment so I may be wrong!

• Catalog corruption - virtual copies not properly related to the master

  A small set of 36 images in a catalog of 12500 behave oddly and virtual copies do not seem to relate to teachers properly.

  Difficult to remember exactly the steps but whose

  -Adding an initial selection of 100 + masters to quick Collection

  -adjust the selection using color signage, number of stars and marking photo rejects

  -create virtual copies of 35 images 4 star pics

  -adding virtual methods to other manual collection

  -apparent virtual duplicate that appears when I don't think I asked new virtual methods in the collection but must have made

  -location of the virtual to reject copies

  -1 picture in photoshop twice editing

  -various other post-processing edition

  In any case I see now in the library panel that 35 photos of master, the 2 files photoshop and the vitrual 1 copies are listed as 1-38, 2-38, etc.. The virtual copies of all but 1, which was added at a later stage, do not be 1 of 2 Although the name of the file is _MG_9999/copy 1 or 2 copy varies from image to image. The images sequence 38 photos 'related' first, then virtual methods and 1 master end when the sort sequence is the time of capture or file name.

  Every thing is there but reported links is obviously false and that worries me and I would like to rectify if I can. The catalog is saved every time Lightroom closes but as I was opened and closed several times a day and did not recognize when this corruption happened that I won't really be loading of a succession of backups and lose any changes of post process or other damage. I just realized that I do NOT have automatically write to XMP enabled in the settings of catalog, although I had to have.

  I export the record of 1413 masters have been taken from another catalog and resynched. Don't expect much and did nothing.

  Anyone any ideas please?

  Thank you

  Virtual copies don't say '2 of 2', etc. Only the superimposed images say that. Which is probably confusing you is that the VCs are normally created stacked. I would say that your catalog is probably fine.

  Ja.

• Shadow of a master appear on a page with a different master CS5

  I have a series of books that make use of two styles of different page controlled by two masters. On occasion in the books, the two masters appear side by side in a spread. The two captains contain similar background graphics, but we have more margin than the other side.  In which case the side margin appears on the left-hand page, the shadow of a substantive element on the full page master appears on the page of larger margin. The actual object that is the shadow isn't here, but the shadow is. This only happens when the margin is left; the shadow does not appear when the masters are side by side in a spread and the wide margin is on the right.  See picture attached.

  

  Pages I can split the shadow disappears, but it gets to be a pain when the text is redéroule and I change pages autour.  No idea how I can keep this ghost effect to appear here, where it is not supposed to be?

  I'm on CS5 on an Intel Mac under Leopard.

  Thank you.

  I should add that I am almost certain that they are in order to get a unique shadow rather than a shadow on each half, which straddles one form or the other.

  I don't know there is a solution for this other than make a second based on the first two pages master adjust only this margin and apply it on the two pages in the spread when necessary (or split the spread as you do now).