Catalog corruption - virtual copies not properly related to the master

Similar Questions

• StartScen.sh-> ODI-1423: working repository is not related to the master rep

  Hello
  
  I'm currently running a very basic case of the command-line command against the local agent:
  (using 11.1 ODI, Studio on Win7, agent on Linux RHEL5 run Oracle account)
  
  ./StartScen.sh IF_XKB_ADR_ENRICH 001 GLOBAL 5-NAME = xkagt
  
  I get the following error:
  
  ODI-1423: referential work THAT WORKREP is not related to the master repository
  
  It is quite a weird because I can't seem to find all the information from this forum or on the web on ODI-1423 error code.
  
  Also, my IF_XKB_ADR_ENRICH interface works very well from the Studio of ODI, for using the remote even very "xkagt" agent (this means everything is ok with work and masters representatives?)
  
  My odiparams.sh file looks ok because the agent starts and stops ok and working scenarios for the account of the workshop (fact the Laflamme family use different credentials to submit a work from the GUI?); the information seems to be there on the master repository driver, url, user, Word of past.
  
  I have tried to present the scenario of my PC with startscen.bat but I can't find the actual specifications of the parameter [AGENT_URL = < remote_agent_url >] (host: port?) documentation of ODI.
  
  Any help is welcome.
  Thank you

  "" "You're almost there. '"

  When you connect to the studio of ODI, you have the name of the repository work (remember in the login screen) and I think that that is passed to the agent.
  Whereas, when you use startcmd.sh, it should working repository name and one place to do that is odiparams.sh

  This error indicates that either you do not have your logical agent created for the context -
  or
  you give an incorrect logical agent as a parameter name.
  I think that you specify the name of the physical agent as a parameter. You must provide the logical name of the agent.

• Virtual copies not found in the Windows folder.

  I don't remember having met this before, so I'm going: I just created a virtual copy of some photos of my summer vacation and everything works fine. But when I need to access these photos right window (Windows / my images thats), virtual copies do not appear in my folder YYYYMM. Back to LR if they will appear there with an extension of 1/Copy. Right to the VC, then "Display in explore" will highlight the original folder, the VC is always not there. Part of the frustration is I don't remember what happens before (or) so I wonder if I accidentally changed settings.

  Running LR 4.1 under Windows 7 64-bit.

  Thanks in advance.

  Virtual copies are "virtual". They do not exist in the records; so you can't look into a Windows folder to find them (and in fact, I think it's a bad idea for Lightroom users to browse the folders in Windows in any case, when you browse browsing in Lightroom).

  If you remember you could do before, that is, you're wrong to remember, there is never a convenient where the virtual copies appear in the windows.

  If for any reason, you need a photo for use outside of Lightroom (a photo, virtual or 'original' copy), you would have to export it.

• ODI-10150: repository to work with ID 1 is not related to the master

  Hello
  
  ODI 11 g (11.1.1) with Database 11g r2
  
  I created the Master repository (odimrep) and
  repository (odiwrep) of work, created from topology
  Before the next step, during this time I was able to connect to connect to the repository of work and able to do all the work
  
  
  
  I then created the repository of topology (odierep) running, successfully created.
  After that, I could not able to connect to the repository, work, I get the following error message
  

  oracle.odi.core.config.RepositoriesNotBoundException: ODI-10150: Work repository with ID 1 is not bound to master:
       Definition in master ID:1, Name:ODIWREP, Timestamp:1337006142714
       Definition in work  ID:2, Name:ODIEREP, Timestamp:1337006565503.
  
  .....
  .....

  Could you please let me know what I'm doing wrong configure the repository of the execution, I have to drop everything and start to recreate
  
  
  Any help would be greatly appreciated.
  
  Thank you

  Hello
  It shouldn't really create any problem, if you create a working repository two differenct IDs. But the error messages you gave says, it's something to do with the repository IDs. Usually, we get this message when trying to migrate the code ODI within environments. However, it does not rise as an error message, just gives information and asks us if we want to save the new code repository work. We just need to say Yes and continue.
  I suggest to all again, re-create repositories again. Maybe something went wrong when creating repositories.

  Kind regards
  k

• My client needs to change the text that appears on every page of his site, but in the edition browser is not make changes to the master page text. Is there a way for him to do? A special widget or something?

  He wants a place on the header of every page of his Web site where he can post his latest information in real time every day. If he had his way, it would look like a strip of tickets transiting via the header of each page. I was going to include it in the design of the master page header, so all that he would have to do is update the copy on the master and it would update the header of each page. But in the Assembly browser does not work on master pages.

  Is there a way to do this? Even if it's an a widget that has been done by another Member of the community of Muse?

  Thank you.

  By BC you can change the template or page that would change the display, but if the new site is updated to Muse then he would cancel the change.

  Thank you

  Sanjit

• Why not my text on the master page appearing is not on a page of body?

  I'm working on 11 FM. I have a text box "this page intentionally left blank." on a mooring on a master page called blank Page. When I assign this master page to a page of body (using the master page), the headers and footer appear, but isn't my text "this page left blank.". How can I fix it?

  Is "this page intentionally left blank." as part of the main text (flow one) on the Master Page 'white '?

  If so, remove it and place it in a new block of background text on this page.

  Flow text on MPs does not appear on the pages of body.

• Try to move the content from the old profile to the new profile of corrupt, but do not know what are the permissions to use

  I already followed the procedure to copy the files from the old profile to the new up to a certain point, but the "destination folder access denied" message for 9 elements.  When I go to change the permissions, I don't know which ones to use.  Any help would be much appreciated.  It took to run the computer all night and part of a day to get to this day it is so slow now.  Thank you.

  Discussions were merged.

  Duplicate deleted not.

  Kindly, don't start another pursuit of the Thread, you have already running on the same problem.

  ABSG dear,

  Welcome to the MSFT support community.

  Try to start your system in safe mode and disable/uninstall the game for now. If the uninstallation of this game is everything to normal, you will need to install it again. If this is not the case, try another solution.

  Create a new user profile and delete the two accounts as there is a high risk user accounts has been corrupted. Heads up here learn more on how you can fix a damaged user profile and create a new:

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile

  Good luck!

• a7S Audio not automatically related to the video

  Normally when I import video in audio is automatically linked. Recently switched to a7s and imported .mp4 video and audio shows how it would normally but is not related to t he video. So when I cut I have to cut video and audio. Someone knows how to fix this? Also strangely will connect even if I manually (make a right click, link)

  Linked selection on and off in your timeline? It will change if first respect clip that connects or not.

  

  MTD

• JavaScript is not properly running in the Cluster WLS

  Hello

  We have Production Weblogic Server 10.3.6 in Clusters running on Oracle Linux 6.

  Server 1

  -----------------------

  ProdAdminServer

  Node Manager 1

  Managed server 1

  Server 2

  ----------------------------

  Node Manager 2

  Managed server 2

  Always happens, every time that deploy us the new version of the ADF Application do not load a javascript function.

  We have a (.js) line of Javascript in Application of ADF, which are used for all necessary pages. Either way, update us the existing application EAR file or

  completely remove and redeploy, function js do not load.

  We have tested in IE8, FF30.0 & the two browser complain that a particular defined/not found js function.

  The strange thing is that, while testing locally in JDeveloper 11.1.2.3 IDE, all functions operate normally. We have already configured ADF Application for HA Cluster Weblogic environment.

  What is perhaps the reason for this behavior?

  Thank you.

  We found the solution in the Configuration of F5 BIG IP console, where we found that acceleration Web profile has been configured for caching. The parameter Web Accelertion profile = None, solve the problem instantly.

  Go to the - Local traffic > virtual servers: list of virtual servers > VS_WEBLOGIC_http_virtual > Web profile acceleration.

  
  

  Now, using Load Balancing DNS name javascript function loads instantly.

  Please let me know your thought on this behavior & setting.

  Thank you.
  

• The cursor keys are not properly changing to the next/previous image

  In recent days, one of my two computers-Lightroom shows a bug quite boring, standing, on the cursor left/right keys:

  It happens to the magnifying glass:

  When I press the right cursor button, Lightroom does not change to the next image

  Instead, it does not change to the next image, before it reaches the end of the file .

  At the same time with the slider to the left, which always takes me to the first image in the folder...

  Navigation in the Loupe is almost impossible, just the mousewheel still lets you change to the next/previous image.

  This happens for all the sets, catalogs, folders, etc. If I have a choice, so it takes me to the image of first/last of the selection, nothing between possible.

  All the advice, what was wrong with my system? Everything was good a few weeks ago, and everything works fine on my other computer, which has just the same behavior...

  Thanks for the tips!

  Harald

  After hours of tests, I identified the reason:

  The issue has been raised by the service «skdaemon.exe»

  It's supposed to be a utility enhancing keyboard, which was preinstalled (und later updated) on this computer.

  After disabling (from autostart), LR works very well once again, and I did not notice the missing keyboard still works.

  Maybe this helps someone else to circumvent this problem and thanks for the support.

  Harald

• MacOS Sierra not properly to access the Keychain for OpenSSL/SSH passwords

  Hello

  It seems to be a problem in the Sierra of MacOS on the passwords for SSH keys.

  I have my public/private key pair that is enabled for access to some linux servers, so I can't SSH in without inserting my password. After upgrading to Mac OS sierra, it seems that the keychain is no more long-term treatment/store/retrieve passphrases correctly.

  When first tried to open a session in one of my remote servers, asked me for the password, which seemed odd, so I thought that maybe the passwords were lost in the upgrade and changed the password manually by calling "ssh-keygen - f id_rsa Pei." Then I went to log in again, I asked the password and he entered, so I could connect to the server but then, apart from SSH telling me it has stored the password in the keychain, subsequent attempts to connect again always ask me the password.

  debug1: Next authentication method: publickey
  debug1: Offering RSA public key: /Users/xxxxx/.ssh/id_rsa.pub
  debug3: send_pubkey_test
  debug3: send packet: type 50
  debug2: we sent a publickey packet, wait for reply
  debug3: receive packet: type 60
  debug1: Server accepts key: pkalg ssh-rsa blen 535
  debug2: input_userauth_pk_ok: fp SHA256:/xxxxxxxxx/GM
  debug3: sign_and_send_pubkey: RSA SHA256:/xxxxxxxx/GM
  debug3: Search for item with query: {
      acct = "/Users/xxxxx/.ssh/id_rsa.pub";
      agrp = "com.apple.ssh.passphrases";
      class = genp;
      labl = "SSH: /Users/xxxxx/.ssh/id_rsa.pub";
      nleg = 1;
      "r_Data" = 1;
      svce = OpenSSH;
  }
  debug2: Passphrase not found in the keychain. Enter passphrase for key '/Users/xxxxx/.ssh/id_rsa.pub': debug2: no passphrase given, try next key
  debug1: Offering RSA public key: /Users/xxxxx/.ssh/id_rsa
  debug3: send_pubkey_test
  ...
  debug2: storing passphrase in keychain debug3: Search for existing item with query: {
      acct = "/Users/xxxxx/.ssh/id_rsa";
      agrp = "com.apple.ssh.passphrases";
      class = genp;
      labl = "SSH: /Users/xxxxx/.ssh/id_rsa";
      nleg = 1;
      "r_Ref" = 1;
      svce = OpenSSH;
  }
  debug3: Item already exists in the keychain, updating. debug3: send packet: type 50
  debug3: receive packet: type 52
  debug1: Authentication succeeded (publickey).
  

  Note how he is unable to find the password in the keychain (it is out of the attempts of the second and following), then he says it stores the password in the keychain, and then, he considers it and "updated" it. However, next attempt will not find the password in the keychain, so that the process will be repeated "ad nauseam".

  We are not allowed to discuss beta of Mac OS in public forums.

  When you register, you gave instructions for reporating problems.

  Please find this information and use it, so that developers can solve any problems you encounter.

• Tecra Z50-A-12 X is not properly connected to the Port Replicator III

  Hello

  I just bought a TECRA Z50-A-12 X with HI-speed III 120 replicator Port Replicator.

  It works but the computer is not stable and I fear that this will eventually damage the port see me problems when using.

  Indeed, the PC sits well in the Replicator.

  Is there a solution or did not have this app?

  Thank you for your response.

  Nice day

  Hello

  Please don't get me wrong, but you should clarify this with Toshiba directly. Here on this forum, you can hear some useful opinions and comments, but I think you should get info straight from Toshiba directly.

  You can also do is to contact the nearest Toshiba service provider and ask for help. You can visit ASP and demonstrate how it works and I hope that you will get a professional opinion on this problem.

  Long ago I had a Tecra laptop with port replicator, and he was well in place and really does so port replicator he not there no danger of damage to the small port located in the lower corner.

• Not properly used by the printer cartridges

  Original title - printer

  I have a HP 2610 printer all-in-one. If I print a test page, it uses two cartridges, color and black. If I try to copy or print; either the printer or the computer, it will use only the color cartridge and will not use the black cartridge. I tried cleaning the printer. Remove and then reinstall. I don't know what to try next.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• P2V domain controller (for a test, the new virtual will not be connected to the network or used in production)

  I wanted to check that won't affect my physical domain controller by performing a P2V migration to this subject, we would like to P2V our current DC (in production) to put in our test environment, it's so we can simulate one pass from 2008 to 2012. I would just check that install VMWare converter and performing P2V migration on the active domain controller current WILL NOT affect our current physical machine.

  Can someone advise?

  DC and P2V = Don t do, since there is absolutely no guarantee that the DC P2Ved work. I had horrible experience during a migration of a data center to a new provider, the provider told us that P2V would be perfectly viable and that they had done several times. So ultimately they tested migration P2V, everything worked. Then, the day of the passage to the they did it again and AD did not come to the top. In the end we had to make a member server new rollback, as well as on the website of the provider and a classic dcpromo Setup does the job.

• thinking does not not properly after applying the Brush tool

  Problems when I apply the Brush tool to this image - Top one.  Then, when I think about it I get this one listed at the bottom.  Arch is right, but the trend is going bad positioning.  I need a real mirror, one where the left wave pointing point right and right wave point left points.  I tried horizontal and vertical reflection, and nothing works.  Even when I do a new brush with waves pointing in the opposite direction, to complete the other half of the CRA, it still does not work.  Advice would be greatly appreciated!

  

  You can reflect vertically with the regular Reflect tool, then double-click the entry of brush in the appearance palette to open the Options dialog box of race for this specific path. In the dialog box take Flip around.

  You can save this appearance as a graphic style where you need them more often.