HP wireless e-all-in-one B110: HP printer does not not despite all new inks and following the instructions any catch-up

Similar Questions

• HP wireless all-in-one B110 a: printer will not print or copy, page setting even not

  Less than an hour, printer went from perfect to stop working. Does not print even a correct setting page, this setting is impossible. I swap market several times. How do I return to work?

  Problem solved. It's ink on ink support. After that cleaning printer seems ok.

• 7520e HP photosmart all-in-one: 7520e photosmart printer, does not connect to web services

  My printer was working fine, I share wireless between your desktop 8.1 windows 64-bit, windows 7 64 bit desktop and a windows 8.1 64-bit laptop, the latter is rarely used although it remains connected.

  Now, for some reason, my printer cannot connect to web services, it says an error has occurred, but you may still be able to use some of our services.

  I can connect to e print without any problems and it is connected to my network and wireless, I managed to send faxes, but only from the top of the charger of my printer page and not my computer, but at least it works, I can do a sheet of coverage since the fax software.

  Is this one of printers who had a few apps taken away from him? If so, this may be the problem with the web services.

  I uninstalled my software to print several times and re installed as has a HP technician but still no luck.

  Any ideas please.

  It print and scan very well although I have on my desktop windows 8.1 for the moment, I still have to

  install it on my windows desktop 7. Last night, when the technology installed on my windows desktop 7, he says you correctly it installed-windows 8.1 desktop, which of course was incorrect. I am the administrator on office computers, no homegroup, or user accounts, I just choose to share.

  Hello @emma22,

  Appreciate your efforts.

  Please check the picture below:

  

  Go to printer EWS - network - wireless - IpV4

  Click the manual IP address - suggest a manual IP address.

  Select the manual DNS, then choose 8.8.8.8 and 8.8.4.4

  Save the settings.

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• All-in-one OfficeJet J5780 printer does not print manual duplex

  Hi all

  first of all, sorry for my bad English; I'm Italian and the Italian Forum, I can't find anything that can help with my problem.

  I use my old (and wise... ;-)) OfficeJet J5780 on my laptop with MS Windows 7 SP1 64 bit for years without any problem. In particular, I use the option to manually print on both sides; This means that, once selected this option, the printer automatically prints odd pages in reverse order, and then a pop up tell me to take the papers printed, rotate and load them again; then I click OK and print even pages in the right orders.

  Suddenly after any event special, for a few months, or even I select this option, the printer prints the odd pages and then nothing happens on my pc, no pop-up window appears, the printing process remains in the coil and I can not the printer to print even pages too. The only way is to remove the process, clean the spooler and restart it.

  I also installed the latest version of the drivers and all of the full package of the HP software, but the problem is still there.

  As a solution, I apply manually print the odd pages in reverse order first, then same pages, but it's really a mess...

  Could someone help me?

  Thank you very much.

  Hi Phoenix69,

  If this is the case then itreally could be drivers.

  You can follow this link to completely uninstall the old software and then use this tool to automatically install the correct software for your computer.

  Thank you!
  IdleHands

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• LEXMARK ALL-IN-ONE X 1150 PRINTER DOES NOT NOT AFTER UPGRADING FROM VISTA TO 7.

  I TRIED DRIVER DOWNLOAD FROM LEXMARK WEBSITE BUT WITHOUT SUCCESS.IS THERE A SOLUTION OUT THERE?

  Thank you Dominic.I have taken the bull by the horns and contacted Lexmark (to the Philippines Croiriez_ you) and I'm now up and running. They were excellent.

• 80070002__ receive this error code. Cleared out all temporary files by following the instructions in the help, but it does not.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Please read: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Hearing does not open a new file and displays "one or more files treat active jobs. Please cancel these jobs or wait for them to end. »

  Any thoughts on what may occur? Everything was fine, but I have nothing will change its state of 'spirit '.

  Hi again, problem solved... I rebooted and it works again, so I presume it was a temporary problem at my end. thank you for your help!

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• All-in-one printer, HP Photosmart 7510 does not recognize my computer as part of the network.

  Range of all-in-one printers, HP Photosmart 7510

  The function scan of my 7510 new does not recognize my computer as part of the network. (He said that the scanner can not find the computer)   It prints fine from the computer, however.  HP ran diagnostics and cannot find the problem in their system.  Suggested that I try to find a solution to the millisecond.  I was unable to find a solution yet.  Can anyone help?

  Hello

  I suggest try to connect your printer to the computer and check if the scanner works.

• Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

  Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

  Anyone where I can download this driver?

  See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

  There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

  They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

• HP Photosmart Wireless B110 printer does not

  Hello

  I just started using a HP Photosmart B110 and tried to plug it into my Mac.

  My equipment:

  2011 MacBook with OsX installed 10.7.5

  connected to the internet via tethering over a Nexus4 or a personal hotspot via iPhone4. Focus on our network is allowed.

  Epson B110, connected to the internet in the same way as above.

  MacBook connects to the internet without any problem.

  When I connect the printer to the hotspot, the wireless network Test report works well, every diagnosis is spent / excellent. Computer is connected to the same SSID as the printer. Address the computer Ip is 192.168.43.xxx, the ip address of the printer is 192.168.1.xxx.

  The printer works perfectly even via System - Scan Printer preferences & - add: the printer get noticed in printers nearby.

  BUT

  -printer is not accessible from the pc or the smartphone to the IP (no ping, no hp page when you access from the internet browser)

  -printer services does not work from the pc (Hp Utility cannot access the printer, ink widget does not work)

  - and, when I launch a print, I can't print (error "the printer is not responding")

  -If I uninstall the printer and try to reinstall via IP address with the HP Jetdirect Protocol, I can't add the printer.

  In addition:

  Printer does not seem to be online: he cannot reach HPePrintCenter through the Apps section, but this can depend on the fact that hpeprintcenter shows that the status:

  The HP ePrintCenter is offline for maintenance, but I can't be sure.

  I guess that the problem happens somewhere between printer-router-computer, the printer prints the test without flaw and its connection is excellent (although I would be safe if the printer only has been able to connect to HPePrintCenter, but I think I'll need to try another time...).

  If anyone can help? I don't know what to do more and unfortunately, I buy a USB cable if I can't configure mobile printing (that I'd use my mobile devices too, but I would need to stick to the print with the USB solution... Messaging system)

  Thanks in advance

  HI Kyrnnie:

  I understand how frustrating it is when things are not going the way we think they should.

  Be assured that I'm here to help.

  You will need an update for the Airprint working with the B110 printer.

  I like you send a link for the manual of your printer. click here.

  Click the connectivity and go to the ad-hoc connection.

  If you can connect with the adhoc, you should be able to add the printer. There is a wireless connection between the mac and the printer only.

  If you are still experiencing a problem, you can take the printer at home a friend or family and connect it to their network to be able to install the update of the firmware.

  When you get home it should appear as Airprint printer.

  This will allow another direct connection between the printer and the mac.

  AirPrint printers click here

  With Airprint option, you need to install hp connect app to be able to scan from your devices (Iphone 4 or Nexus)

  When you printed the network page you said the address IP of the computer is 192.168.43.xxx, but the ip address of the printer is 192.168.1.xxxx, only the xxx is not the same.

  Have you tried to assign a static ip address?

  I send you a link 'Printer does not maintain wireless' click here. Step 6 describes how to set a static IP address.

  I hope this helps.

  If you need help please reply back

• My HP Photosmart C4280 All in one printer does not print

  I troubleshoot the printer and it says that there is no problem.

  Tried to check ink, does not. Checked with MATS and there is no problem.

  is there a problem with these printers?

  Here are three books for this specific printer including how istalll it.  I suggest to download and review them to see if you properly follow the process:http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&softwareitem=mp-52220-1&os=219&product=3192753&.  If you have any questions as you go along.  There is a lot of reading, but there's everything you need to know to do it right - it's not just a matter of steps, but also to do them in the right order (and there may be steps that you did not because they were not explained properly).  Make sure you have all the software, drivers and firmware necessary and compatible with both your printer AND your version of Vista.  Download and re - install them again just to be sure, didn't you build a time corrupted version first.

  If those who do not help, contact HP Technical Support at the: http://welcome.hp.com/country/us/en/support_task.html and request their help in istalling the printer and do print and work in all its forms, it should.  They know more about their products that we do.  I'm sure they will be willing and able to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.