5.1 surround sound mixing - what signals to use?

Similar Questions

• 4th generation Apple tv remote keeps switching HDMI 2 if I have my surround sound Samsung anynet on which uses when the samsung TV is turned on. Currently I have away the skin until I found what I want to watch.

  Current configuration is a Samsung TV with a Samsung blu - ray surround sound.  When both are on they use anynet to communicate. Now with the new apple TV 4, any click on the apple TV remote will send my TV HDMI 2 (where the entourage of blu - ray is connected). How can I stop this? The apple TV is HDMI 3. The dressing must be on HDMI 2 which is also ARC (Audio return channel)

  Try to go in the settings of TV4 of Apple and the deactivation of the ability to control your receiver and your TV. This should disable HDMI CEC which resembles its conflict with Anynet.

• A surround sound to my Satellite A300-S6872

  Greetings!

  I want to use my computer to send a sound signal 5.1 surround to my Onkyo receiver. I have a headset jack SPDIF port size, which I think allows a surround output.

  In addition, when I tested my Realtek digital output device, the green lights will turn on but I have no sound (which I think ' may be the result of bad cables I'm using).

  What do need me and how do I make my exit from the computer a surround sound?

  Thank you!

  Hello

  If you are sure that your laptop supports S/PDIF (digital audio output) to 100%, then you can use the cable like this:
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm

  If you plugged the A300 cable, then you will need to choose the right output of the Panel-> sound

• 5.1 surround sound problem

  Hello

  A year ago, I created a stereo session to make a multisession mix in Audition 5.5. But now I want to use this mixture to create a 5.1 surround mix. But I can't do it. I changed the output of each output channel default Surround, used the panning of the track and then I exported the whole session as multitrack mixing, opt for the final 5.1 mix. But I can't make it work... All I get is a wav with complete silence.

  So I thought: why not revert to the version 3, with whom I did surround CDs in the past? The 5.1 output was 6 separate wav files and I used other software to create the surroundfiles. So I tried to export my multitrack mix to separate wav files by choosing file - export - multitrack mixer - all session and here check all tracks single I want to export instead of choose - stereo or Master - Master 5.1. But what happens then is that I get all the single-wav files (so far so good, because I can load the latter in version 3 and then make a border), but half the files wav is 1 KB. The rest is OK.

  Then I tried to open the session of hearing 5.5 in version 3, but that does not work either. Is there a way to export the session so I can open it in version 3? I tried with XML, but that doesn't seem to work...

  Can someone help me? Or tell me where I can find a very detailed manual (step by step) how create a surround wavfile who accepts Nero Burning ROM to burn a surround CD? Or it is impossible, because I chose a session instead of a session 5.1 stereo and that I need to create a new session of 5.1 and make the mixture all over again? Let's hope not...

  Thank you in advance!

  Tone

  In current versions of Audition (CC2014 and 2015) the best solution that I can find to create a 5.1 mix surround sound from a stereo session is to implement of the bus for L & R main, Center and rear left & right channels (and your LFE channel to use). Send your tracks to these buses to desired levels, and then you can exit the bus as separate files to the combination Downstage.

  -""No matter what track NOT through the captain will be not audible on Mixdown ' -I think that this information is incorrect, as long as you have options on export to bus mixer (or even tracks) through the export > mixdown dialog box. " It would be truer to say that any track don't pass not by the master will be inaudible in a mix of the master output.

• Can I burn a DVD with surround sound 5.1 PE10?

  I'm experimenting PE10 to see if it does what I want.

  I created a small project based on the HD AVCHD 5.1 project preset and have imported a few clips with ac3 for audio files.

  When I play the videos in the application, the sound surround works very well.

  I burned the project on DVD, but when I play the DVD on my DVD drive (plugged into stereo) I don't get sound no go my surround speakers, only forward and Center/subwoofer speakers.

  I tried other presets of project and the creation of a 5.1 audio channel in importing an ac3 file and adding especially tracks.  The problem with this is that the sound surround sound does not work in the application, and I checked the audio preferences and played with the settings.

  So, my question is if I can burn a project with 5.1 audio on DVD to be played on a DVD player?

  Unfortunately, he cannot encode pre DD 5.1 SS, but only import who and then mixing stereo (2 channels).

  PrPro even need optional Minnetonka Audio / over-codes SS SD plugin 5.1 (~ $ 250), do it. PrPro, we can create a DD 5.1 SS DVD or BD, through recall (the included authoring application), but yet will write ONLY the DD 5.1 SS AC3 (through than SurCode plugin) and can not watch the DD 5.1 SS, but PrPro can, so monitoring all should be done before yet. Yet can also write other extra Audio streams, such as DTS, ProLogic, etc., but who MUST be imported into the still and SHOULD be 100% DVD/BD-compliant in all respects.

  Good luck

  Hunt

• No. 5.1 surround sound HDMI

  Problem - I don't get that ' "two-channel stereo sound during playback of a DVD (with Dolby) on my computer.  The computer is connected to an audio receiver that is set up for a surround sound.  Audio and video signals are transmitted from the PC via the HDMI 8.Lorsque on the video/tuner card.

  Computer - Compaq SR7510F

  Vidéo/Tuner - ATI All in Wonder HD

  Connected to Onkyo TX-SR604 through a video/Tuner card HDMI cable.  The Onkyo receiver is connected for 5.1 surround sound speakers.  Video signals are transmitted via the receiver to a flat screen monitor

  Sound - onboard Realtek

  According to the specifications for the SR5710F it is supposed to support its 6 speakers.  However the HDMI audio driver only allows me to select "stereo".  It is a select "surround" box, but the box is "grayed out".

  When I play the same DVD using a stand-alone DVD by Phillips drive, connected to the Onkyo receiver with the same HDMI cable, I get Dolby on the receiver.  This means that it is not a problem with the receiver, it must have something to do with 1) onboard Realtek sound driver 2) HDMI, or 3) the HDMI connection on the video/tuner card.

  I checked on the Web from Realtek site and they list a newer driver for Vista (32 bit), but when I use the Device Manager to update the driver, it is said that it is the most recent.  I don't know that the driver is the problem, so I'm hesitant to try for the heck of it.

  I tried the latest drivers Catalyst 9.1 for ATI All in Wonder card, but that didn't help either.

  Any idea?

  Telefunken,

  Thanks for the suggestion.  It worked!  There is absolutely no sense to me, nor it does not seem logical to select SPDIF, but I can't argue with success.

  I didn't need to buy Arcsoft Media Theater.  I was able to select SPDIF with ATI Catalyst and Microsofts Media Center.  I could get Dolby

  In my current setup, I updated ATI Catalyst 9.3 version graphics card and loaded the audio driver Realtek HDMI ATI R2.18.  Also in the BIOS, I put the Audio on 'Auto '.  I chose the HDMI, not the Realtek driver driver in Control Panel.  I chose Dolby and DTS bothy under the driver settings.

  Now I think I'll enjoy a Quantum of Solace from this nagging problem is resolved.

• Connection to (Qosmio G20) Surround sound

  I'm trying to connect my Qosmio G20 to my sysytem via an amp external surround sound.

  As far as I know I have everything connected correctly, but I'm only obtaining from my front left speakers and rear no where elsewhere.

  I checked the speakers and all the settings I can think on the laptop, is there something that I don't have to send the signal to all the speakers?

  Any help is greatly appreciated.

  Thank you very much

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 topic. I believe that display Quad will be useful for you.

  Good luck!

• Just not upgraded for Windows 10, 7.1 Surround Sound no more functions

  I use a Logitech G633 helmet, which is compatible with a 7.1 surround sound. Before moving to Windows 10, one worked perfectly well with Skype and my sound quality surround sound was crystal clear. After the upgrade to Windows 10, Skype does not use surround sound and instead, I'm treated with bad stereo audio.

  Everything else on my computer always uses one surround sound, except Skype. This problem is only with Skype.

  I tried to reinstall the Skype and Logitech software, with no result. I am at a loss for what to do and if I can't find a solution I'll down(up?) level to Windows 7.

  I already tried to install a version of LGS that dates back all the way to March 2015, and it did not fix the problem. I was already using the latest software version when I was running Windows 7 and Skype worked fine with one surround sound with Win7.

• a6233. SC - HD surround sound?

  Hi, I bought the a6233.sc about 7 years ago and did not have a reason to replace it since then. I added more RAM and a bunch of external hard drives.

  Now, I'm looking for buy a new receiver surround sound capable of HDMI and HD audio and my PC has become the center of the media associated with over the years, I want to make sure that most of the things she would always keep upward. This read on sites Web HP/realtek/Nvidia I initially thought that it would be no problem: sound card is ALC888S and although there no passage in the functions of HD formats, there no record of 192 kHz/24-bit and I have a software that decodes the LPCM sound. But now I just read an article that made me doubt if the sound card is integrated into the exit HDMI of Nvidia 8600 GT.

  Another question, is my PC has more muscle to handle a Blu - Ray player?

  Any help would be much appreciated I could prioritize significantly differently if things are not as I hope.

  Peter

  I understand that you want to know about the sound card and how it works with the 8600 GT video card HDMI output.

  I am not entirely sure about the line of products from Nvidia, but that's how it works on AMD cards.  The video card has a dedicated sound chip for HDMI audio output, which is separated from the dedicated sound system map.  It has its own drivers and resources in Windows.  It is also separately listed in Device Manager in the sound category.  I think it would be the same for Nvidia products.

  Do a ctrl + f search on this FAQ blu indicates the card 8600 is capable of playing blu - ray.  According to the specifications, the system came with 32 bit Windows Vista that would make the RAM max allowed 4 GB (3, 2-3, 5 GB usable).  If there is a large RAM available, it would seem that this would be sufficient.  The system came with a 2.4 GHz quad core processor which should be wide enough for blu - ray playback.  However, none of this is a guarantee.  Each blu - ray player comes with different reading software.  I recommend to look at the system requirements of the software (which should be listed) and compare that to what your system has.  As long as you are within the reading software, it should be fine.

• Audio Usb Hub 3 x Usb 1 x Lan on 5.1 Surround Sound card?

  Hello

  I want to buy a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound external device, but my question is: can I use 2 outputs to give a different signal?

  I use Traktor DJ Studio and I want to use an output for the player on the left and an output for the player from right, is - it possible to do this whit a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound divece?

  Hello

  Is there no possibility to check how it works before buy you? You will be very happy if someone here has already tested. ;)

• surround sound in iTunes

  On my sound Windows 10 PC surround works in Windows Media Player, but not in iTunes. How can I change the config in iTunes?

  I had exactly the same problem and based on iTunes for a solution and after really engage with them, they are back and after testing what they suggested I have now answer that works.  As with all things all he needed was to know what box and the important thing to note is the solution lies not in iTunes, but in a simple setting on your Windows 10 sound settings.

  So the solution is the following:

  First of all, quit iTunes (if open), then go to control panel - sounds - select your speakers (probably failed you device) and then click Properties.  Then click on the enhancements tab and simply check the Speaker Fill box - click on apply and can test to see if you work by using the Preview button.  Surround sound on all 5.1 speakers should play.

  If so the next open iTunes and play your favorite song and it should play in a 5.1 surround sound.

  Hope it works for you - it did for me and is a solution supported by iTunes Support.

  If it does not you spread the word about this solution.

  PS I think this can also solve / resolve 5.1 surround for iMovie and other problems of his fellows.

  Enjoy

  Mike H

• 15 - r218nv: my laptop HP needs to have the software 7.1 surround sound

  Hi all

  So, recently, I have been checking on a headset which supported a 7.1 surround sound, and I found a few I have in mind. I searched on the internet and at one point, I found an article under the helmet that says: Please make sure that your computer supports a 7.1 surround sound. Which made me think if I need a software pre-installed on my computer, or were which means that the description under the helmet download their custom software. Just because I don't want to spend money on the specs of my computer cannot run, so I came here to write this question I know not if I'm going to spend my money on something that my computer will not process.

  Thank you if you read this and have answered my question.

  Pandofla wrote:
  

  Hi all

  So, recently, I have been checking on a headset which supported a 7.1 surround sound, and I found a few I have in mind. I searched on the internet and at one point, I found an article under the helmet that says: Please make sure that your computer supports a 7.1 surround sound. Which made me think if I need a software pre-installed on my computer, or were which means that the description under the helmet download their custom software. Just because I don't want to spend money on the specs of my computer cannot run, so I came here to write this question I know not if I'm going to spend my money on something that my computer will not process.

  Thank you if you read this and have answered my question.

  What you're watching isn't really true 7.1 headphones it simulates, it not there no such thing. If you want 7.1 speaker setup real physical and a card sound Sound Blaster FX that can drive these speaker setup. So don't believe that stuff.

• Sound from speakers surround sound dull.

  I had a few pregnant surround audio connected to my computer. Initially, they seem fine work... these last time, however, when I play music, it sounds dull. My computer doesn't even show that I hooked them up. Is could someone please tell me what went wrong? And how can I solve this problem?

  Hello

  If you still experience this issue, try the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/51-surround-sound-not-working/5f782325-95E0-4AC2-9eee-41a81ec6c8c1

  B Eddie

• Surround sound cut during the game Mass Effect 2 on Windows 7 x 64 bit

  Original title: Surround sound cut while in games

  I gathered all my own office.

  Here are a few basic requirements.

  Procoessor: AMD Phenom II 955 3.2x4

  Motherboard: Asus M4A77T/USB 3.0

  Graphics card: Nvidia GTX 460

  8 GB ram

  Here's my problem:

  My surround sound cut while I play Mass Effect 2. Sometimes not entirely; I'll be able to hear the music, but not dialogue. Other times I can hear the dialogue but not the music.

  I use a headset usb (Logitech G35 7.1 w surround)

  What happens if tried:

  Update the bios.

  Update card drivers his (motherboard onboard)

  Update drivers Logitech G35.

  Patchwork of Mass Effect 2.

  __

  In addition, on people of forums to effect mass who use Windows XP disable their hardware acceleration and solve the problem. I can't find this option in Windows 7 x 64.

  :) Help is appreciated...

  Hi korlath,
  First, make absolutely certain that your soundcard Control Panel, but also the sound properties in the control panel are properly configured to use the number of channels you want.
  If you are still having problems and you want audio equipment, follow these steps:
  a. go to your C:\Users\\Documents\BioWare\Mass Effect\Config directory and rename the file to something else BIOEngine.ini.
  (b) launch Mass Effect without running the Config utility. The game will recreate BIOEngine.ini using the default values, and must correctly identify your audio hardware.
  c. in the in-game Audio hardware settings should already be selected - do not change back to audio software or make other changes to the sound settings.
  Note: Audio: If checked, the game uses hardware acceleration that improves the audio quality and performance. I recommend you check this option in most cases, unless you are having audio problems or other problems. In particular, note that you will need to check this option if you have a multichannel audio system and use more than 2 channels.
  Hope this information is helpful
  Kind regards
  Ajay K - Microsoft support
  -------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Option of surround sound clothes outside with HD4870 HDMI connection after installation of SP1 Vista54

  Clothes outside with HD4870 and HDMI connection surround sound option
  I just built an HTPC and installed SP1 Vista64 and I have a problem. I have a DFI LanParty very X 58-T3H6 motherboard and a VisionTek Radeon HD 4870 video card with HD audio. I have a HDMI cable to my Sony AV receiver and all I get is Audio stereo. The subwoofer never wakes from sleep, or AV receiver indicates anything but a stereo input.

  I have the RealTek HDMI audio device installed, and he says he's working properly in Device Manager. Under properties, what is proposed is stereo speakers. Surround sound is presented as an option, but it is grayed out and not selectable. All drivers are up to date from four days and I have the on-board sound card mother disabled in the BIOS and it does not appear in the Windows Device Manager, nor are there any other audio device except the RealTek HD HDMI audio device.

  Other HDMI devices, such as my XBOX 360, a surround sound very well via the AV Sony receiver.

  VisionTek support told me to install the RealTek HDMI driver, I did, but that's all the help they were able to give me.  The problem persists.  Surround sound is gray under sound properties for this device,

  I took the HDMI cable from HDMI port on the video card and plugged on my XBOX 360 and I get surround sound, so I know that the cable and the audio/video receiver is configured correctly.

  If anyone has an extra idea about it, I know you more!

  Thank you!

  Hi flattery.

  Thank you for taking the time to post.

  Can you please post here the result of your dxdiag in the forum?

  ·         Click on the Start Orb on the Office

  ·         In the Search box , type dxdiag and press enter

  Once you're in the DirectX tool, click Save all information and save on your computer. Open the saved file (must be a text file) and copy this information and paste it into the forums here so we can see again.

  1. What is the version of the BIOS that you run on your motherboard?

  2 have you ever had this installation or surround sound from always grey work?

  Please let us know.

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.