5.2 Lightroom vs Canon EOS 70 d GROSS

Hello

I'm testing the trial version of Lightroom 5.2. My new camera is a Canon EOS 70 d. When you import RAW files in Lightroom the colors of some of the pictures are false. My old 450 d RAWs are fine.

For example on a picture the sky is not blue but turquoise. When you use the DNG Converter, I get the same color. However, the sky was blue. When you open the file in Canon's Digital Photo Professional, the sky is blue as it should.

It happens on some other photos as well. Especially if they have high in blue. If in Lightroom, I increase the blue content and lower the shades he looks almost as it should.

The question now is: I do something wrong, do I need an update or additional plugins or Lightroom simply interprets the bad RAW, and it will be solved quickly?

See you soon,.

Sheepy

Yes, there is a large part of the sRGB blue-violet (under the B-axis) range your monitor is able to display. It is surprising, since the Samsung S24A450BW uses an LED backlight, which should have very little color shifts because of aging and a greater range than the backlight CCFL monitors. My HP 2509 m TN monitor use the backlight CCFL and shows signs of aging with a shift to yellow. My monitor has a better range under the axis - B, which I believe is causing the Green tint. As bad as the range of my monitor it looks like poster the ColorChecker Passport 24 color patches with very good precision, except blue deep a patch is slightly less saturated.

Suggestions:

-Not use a DVI and VGA connection. Make sure that the display settings of the OS see the 32-bit color mode.

-Check all the settings of the monitor and disable all contrast or brightness improvements such as ' Samsung Magic '.

-The value of control of contrast equivalent of 75 / 100 maximum and leave there during calibration.

-Set the Options or preferences software i1 Display to ICC2 and matrix profile type.

-Calibrate using a color temperature of 6500K (D65), level of 120 cd/m2 Luminanceand Gamma 2.2.

-Use the custom monitor RGB color controls to establish the target of 6500K Point white at the beginning of the calibration.

-Use only (if possible) brightness setting to set the target 120cd/m2 luminance level.

-Run the calibration and when finished to check that the new profile is assigned under the OS color management.

Tags: Photoshop Lightroom

Similar Questions

  • Tethered camera support in Lightroom for Canon EOS 80 d

    Why is this device not supported - other functions (import, etc.) started working for 80 days after the last update to Version 6.5.1.

    Hitch support normally follows a release of 'point' or two after the support of raw files. It is also dependent on the package SDK from the manufacturer. If the manufacturer (Canon in this case) it is in their SDK, it should be too long.

  • Canon EOS 5 d Mark IV any photos in Lightroom CC2015/16 Raw 9.6

    Hello

    I bought a Canon EOS 5 d Mark IV. I tried to import my photos into the latest version of Lightroom CC2015/16 Raw 9.6.

    Lightroom program recognizes the camera or the photo to the cr2 format.


    What can I do to continue using Lightroom for photo importing or editing?

    Thank you

    Rgds,

    Frank

    Hello world

    6.7 Lightroom and Lightroom CC (2015.7) are now available and it includes support for Canon EOS 5 d Mark IV.

    Please upgrade to the latest version of Lightroom to help > updates menu.

    Release notes:-Lightroom CC now available 2015.7

    Kind regards

    Assani

  • I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

    I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

    Hi soewandichan,

    Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

    Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

    Kind regards

    Tanuj

  • When will be able to attach the Canon eos 5 d - r to lightroom 6. ??? Latest version of MacBook pro os

    I want to be able to tether my Canon 5 d - r camera to my macbook pro installed the latest OS.

    I tried and it says no camera not connected, what I am doing wrong?

    Dave

    Hi David,

    From now Canon eos 5 d sr is not supported for the tethered shooting, and there is no ETA for it.

    You can always read the following article to check the device support for tethered shooting: https://helpx.adobe.com/lightroom/kb/tethered-camera-support.html

    Please let us know if it helps.

    Kind regards

    Tanuj Sandal

  • I bought a Canon EOS 750D and the RAW can not import into Lightroom.

    I bought a Canon EOS 750D and the RAW can not import into Lightroom.

    You must be

    Lightroom 6/Lightroom CC 2015

    OR

    The free Adobe DNG Converter version 9.0 or later, use this to convert RAW to DNG, and then import the DNG in your Lightroom

  • How can I add the Raw for the Canon EOS Rebel T6s file 5 Lightroom

    You want to know if there is a way to add the RAW file for the new Canon EOS Rebel T6s format to my desktop Mac version 5 of Lightroom.  All I found was the plugin cameraRaw 9 for Lightroom 6 that takes in charge of my camera. This does not work after that I have download and run the installation

    Thank you

    You will need to convert RAW to DNG for use in LR 5. Or you can go to LR 6. CameraRaw plugin is not relevant to LR. This is for Photoshop.

  • Import of *. Files CR2 for Lightroom 3.6 - support for the Canon EOS 70 d

    Hello

    try to import *. Files CR2 for my new camera Canon EOS 70 d to 3.6 of Lightroom, but it is not supporting format. What should do? Can someone help me. Thanks a lot for your answers, your Petr

    3.6 Lightroom does NOT support the 70 d.  You need to go to LR 5.2 or convert the CR2 files to DNG using the free DNG CONVERTER from Adobe to use it in 3.6

  • Canon EOS 600 d producing dark tones of RAW images (.) CR2)

    Hello

    I'm new in the world of photography, using my Canon EOS 600 d for these past two years. I have turned off later just started shooting in RAW (.) CR2) format, mainly RAW + L. What I see is that all my CR2 files have a blackish tone added to them over the same JPEG formats. All images are all taken in manual mode.

    Could you please help me with the below.

    1. There is a problem with the Canon EOS 600 d model. Friends of my friends with Canon EOS 600 d are complained of the same show.
    2. If it is not a problem with the camera series, is there a solution ready? By changing some settings or...
    3. If so could someone please share the same with me in this forum.
    4. If it cannot be resolved by simple change of parameters in the model of camera, can anyone please provide some resolutions in adobe photoshop, cameraRAW, adobe LightRoom or any other software.
    5. Discuss about it with some friends of friends who have had recourse to Canon EOS 60 d and 5 d series and none have faced the same issue with RAW formats.

    I stuck a few examples below. I was unable to view images of CR2 in this forum, just open images using picasa and taken screenshots and paste as simple images.

    Any help will be much appreciated and really useful for me. Please ignore if I am sounds very stupid, I am new in this field.

    Thank you

    Boissière

    I think that Picasa is your problem.  All RAW converters are different.  Mr. Martin is correct to a point, but most of the converters apply the settings that you have made in your camera in a tag file.  This is how a RAW file can even be posted. Otherwise, you can not view a RAW file.  IMHO, Adobe is the best RAW converter.  It is a view shared by photographers professionals and laboratories.  You can certainly use PLR as your RAW converter.  After all, it's own Canon, and it's free.  But I recommend you get one of the programs Adobe Photoshop Elemets 6 Lightroom or Photoshop full blown.

    Even some of the free converters are better than Picasa.  GIMPshop for example or Darktable (Mac).

    Remember that it is always better to get the right settings in the camera rather than rely on the post to do.  ACR 9 will apply these settings for beginners.

  • Images showing red blue spot and they are not sharp at all - Canon EOS 600 d

    Hello

    A month ago I bougth Canon EOS 600 D with 18-55 mm and 55-250 mm lens and everything is fine I capture images of the Moon and wildlife photography.

    But now I am facing a problem with it.

    Recently, I tried to capture pictures with my Canon EOS 600 d and suddenly, I noticed that the pictures are not sharp at all and the images show task red and blue. I don't know what to do I'm just an ammature in the present.

    Please can someone help me with this problem.

    It is chromatic aberration, it's a type of distortion that exists in all optical components to a certain extent, but varies depending on the lens.  In general, the less expensive lenses will be more CA, especially something like the kit lenses.  You'll notice more in high contrast situations, like a brilliant white on a black background.  You can fix it to a certain extent in post with programs like Lightroom or Photoshop.

  • Could not import RAW files for Canon EOS 5 d Mark IV

    Hello

    I cannot import the Canon EOS 5 d Mark IV RAW files photoshop CS6 and lightroom 5.7.1

    I've updated to the last update (it does not)

    I tried to use DNG Converter as well (he couldn't read files)

    Please notify

    Hello world

    6.7 Lightroom and Lightroom CC (2015.7) are now available and it includes support for Canon EOS 5 d Mark IV.

    Please upgrade to the latest version of Lightroom to help > updates menu.

    Release notes:- Lightroom CC now available 2015.7

    Kind regards

    Sahil

  • How to open the Canon EOS M3 Raw files in LR5.7? [Help]

    Hello

    I don't have lightroom 5.7 purchased outright, to pay each month and use windows 8, I updated the update of raw and dng to version 9.

    I bought a canon eos m3 and shoot in raw and lightroom will not open them they are cr2 files, read I need lightroom 6 or later version is this correct as all my other canon DSLR digital raw files open very well?

    Neil

    Sp1dey85 wrote:

    Hi thanks a lot

    How do these things? If you could advise would be gratefull

    Thank you

    Google Adobe DNG converter 9.5.1.

    Download it from the Adobe website and install it. Copy your images to a folder on your hard disk that you create. Probably in the same folder structure all your images are stored in. By default, which would be under your user name > images folder, but it can be anywhere and any name.

    Run the converter program and point to this folder, look through all the options of the converter program and choose those that are best for you and click on the button to convert.

  • Canon EOS 5 d Tethering does not yet

    Dear community

    Today, that I'm the new Canon EOS5Ds. I tried to establish endearing Lightroom but when thetering is started connecting to the cam get lost.

    Canon of attachment with the DPD software works, but Lightroom is much more better ;-) I want only to Lightroom Steelworkers.

    It seems that tethering with the Ds 5 is not yet supported? Is this official? Is there a fix to support tie quickly? Or is it planned when 5ds attach is supported?

    Thank you very much!

    Greetings

    Manual

    I found this fix and it worked: Re: 5 d + Lightroom endearing. Does not? : Discuss canon EOS - 1 d/5 d/6 d Forum: Digital Photography Review

    Apparently, problem is not in LR itself. Adobe uses only Canon's OEM API libraries. And what they have in CC 2015.1 Version 2.3.something. Trick is to replace the LR of the dll with EOS Utility V3.

    Navigate to C:\Program Files\Adobe\Adobe Lightroom\tether_canon.lrplugin and replace EDSDK.dll and EdsImage.dll with the same files from C:\Program Files (x 86) \Canon\EOS Utility\EU3

    Greetings

    Manual

  • How can I get a update for the Canon EOS 7 MK II

    Can you tell me please how to get an update of Lightroom 4 > 4 for the Canon EOS 7 d MK II.

    Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

    Version details:

    Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

    Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a

  • Is the new Canon EOS 7 d Mark II supported creative cloud?

    Is the new Canon EOS 7 d Mark II supported in Lightroom and Photoshop in creative cloud?  If not, is anyway to know when it will be? My latest version of Lightroom (5.6) does not recognize this camera RAW files.

    Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

    Version details:

    Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

    Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a

Maybe you are looking for

  • AppStore crashes with record signing

    If I try to install any application that is new to the hardware on this computer, the App store will ask you a login to allow the application (free included) and then hang with a spinning icon.  The app store has to be force quit to continue. (new OS

  • Track of functions in a 2D on a graph table

    Hey all,. As an exercise, I am tracing 2 functions placed in a table 2D on a chart, but for some reason any figure shows only one of them. The functions are: y = 5 x + 10 and y = 6 x - 10. I really don't see what I'm doing wrong here, could someone g

  • HP touchsmart 520 screen freezes.

    I go to Task Manager and get the mouse working again, but just by using the touch screen stops after a few keys. No error message is displayed. Everything seems to work ok. Any help much appreciated.

  • Use Gmail as default email NOT from Apple Mail client

    I want to send the scans to send using Gmail, but HP opens my Mail from Apple instead. I installed Gmail Notifier and set it as your default e-mail manager in Apple's Mail preferences, but HP doesn't know this. OS x 10.6.8 C310a eAll-in-one HP Photos

  • Universal application for both versions of the OS

    Hi all What is the best way to create applications that will work on different OS version with the help of the old OS functions? For example, the application must check something in the background and inform the user if a problem occurs. 4.6 + we can