Track of functions in a 2D on a graph table

Similar Questions

• A different function is created instead of the expected (table Index instead of initialize array) Labview - a 8.5

  Hey all,.

  I have a really strange behavior here. I'm using LabView 8.5. I open a white VI and try to use the function "initialize the array.

  No matter where and how I find (using search functions, or by accessing the 7.x-> table-> table initialize function), when I drag and drop it off at my VI, what I get is "Array Index" instead!

  Even when I hover over the icon table inside the palette is initialized, with aid switched on (Ctrl + H), what I see is the help page for table of Index. It's as if somehow the index table replaced function Initialize array entirely, with the exception of the simple icon in the palette...

  I tried to restart Labview and my computer nothing works.

  Someone at - he never experience a similar problem? that means, one different function other than for being created. I have attached a screenshot.

  Thank you

  -Anne Marie

  Thanks for your replies.

  My palette is screwed a bit isn't it? Most likely because the installation I chose a bunch of older versions in favor... and I regret it now.

  Funny enough, during the search in the functions that it only brings me version 7.x of functions of table etc... but I can manually find the standard in my palette, and of course, version 8.5 standard functions seem to work...

  I need to finally do an install of cean, but for now, it's all good!

  Thank you

  Anne Marie

• RoboHelp 11 has a track changes function similar to that of MS Word?

  A help system within RoboHelp 11 on Win 7 editing system. Is there a way to track the changes I make so that they can be found in the FrameMaker or PDF Word I circulate for review?

  Thank you.

  Unfortunately not. The review function is available for people using Robohelp himself.

• Is it possible to an array of Boolean function number in a case without the table of Boolean structure?

  Hi guys! In my program, my "robot" (lego mindstorms EV3) has essentially read a code bar and do different things according to the codes bar, he reads and so I have an array of Boolean, and basically I need compare to the other Boolean tables. First of all, I used the "Boolean chart at number" function and then just put it in a structure of the case, but it turns out that the Boolean value to number function is not compatible with my Lego EV3 brick, so I have to find another way to do this. Any ideas?

  Help is appreciated! If you have any questions or if my question is confusing, just ask!

  Thank you.

  
  

• Graphing calculator that is derived from a function + tangent line on the same graph. 70% in fact, I need help :(

  Hi all!
  I'm using Labview 8.6, but the file is saved in labview 8.5.

  I'm almost done with this mission, but I can't understand how to draw a tangent line at the top of the chart with the derivative of the function.

  Can someone help me please?

  Thank you

  LabVIEW file:

  Analysis of the assignment:
  

  Hello

  here a solution how to add Ct to C

  Concerning

  Tinnitus

• Using the function PLSQL return Record Type Index of Tables in ADF

  I have a PLSQL function, a return type. My ultimate goal is to take this binary integer index Table and print it on the screen...

  CREATE OR REPLACE PACKAGE my_pkg IS
  TYPE t_col IS RECORD(
  i NUMBER,
  n VARCHAR2(30));
  TYPE t_nested_table IS TABLE OF t_col;
    FUNCTION return_table RETURN t_nested_table ;
END my_pkg;

  
  

  OPTION 1:
  

  1) has anyone got best practices to accept plsql RECORDS returned by a function?

  Here is an example.

  http://adfpractice-Fedor.blogspot.SG/2013/01/working-with-PLSQL-procedures-in-ADF-BC.html

  But it will be a lot of work... first of all accept the results in a loop... then store in a temporary storage can be a few VO or global temporary table and then display them on the page

  
  

  OPTION 2:

  Using the functions PIPLELINED and use in the select statement.  While I can use this select statement in the SQL query to create VO... and drag and drop the VO...

  CREATE OR REPLACE PACKAGE my_pkg IS
  TYPE t_col IS RECORD(
  i NUMBER,
  n VARCHAR2(30));
  TYPE t_nested_table IS TABLE OF t_col;
    FUNCTION return_table RETURN t_nested_table PIPELINED;
END my_pkg;

  
  

  select * from table(my_pkg.return_table);

  
  

  Wow... I'm so smart! .. really possible?  who is the best/possible/recommended option?

  I'm sure that will be the question most read by many who wants to use PLSQL instead of JAVA to the treatment and CHOSEN to use only to display the output of the PLSQL functions or procedures.

  
  

  Thank you

  Rahul
  

  
  

  Dario

  Do you mean the scope of the defined Type pkg will be finished?

  I created guy outside the pkg as 'Create Type' if it works in this case?

  Yes, level objects schema (created with "create or replace type...") can be used in java and this can work.

  I think that then the scope of this TYPE will remain until the user session passes.

  Object definitions is not worn, but have their bodies.

  So, if you instantiate the data level object type schema in a plsql function, scope of this object is this function.

  Of course, if you instantiate the object as a variable package, then life of this object is equal to the lifetime of the package (which usually equals life of session db).

  Dario

• How to call a function whose name is stored in the table?

  Dear members,
  
  I have a function with return number and store its name in a table.
  
  now, I want to choose the name of this table function and run it and return the value of a variable in my form.
  
  Here is my code in when pressed to release button.
  

  DECLARE
       v_value number;
       V_FUNC VARCHAR2(100);
       V_PARAM VARCHAR2(100);
  begin
       select FUNCTION_NAME, PARAM 
       INTO V_FUNC, V_PARAM
       from function_table
       where id =1;
        
       message('V_FUNC='||V_FUNC); pause;
       v_value := v_func||';'; --run_tb_function;
       :text01 := v_value;
  end;

  This code gives the following error:
  
  ORA-06502
  
  
  with regard to:
  
  Published by: user2040934 on February 2, 2013 09:47

  You can use EXECUTE IMMEDIATE to call pl/sql dynamic. But you need to wrap it in a db procedure.

  BTW... What is the reason of this dynamic approach, as it is very unusual?

• a function that returns the type with a table joint!

  Good day to all,
  I have a function that returns a type.
  
  so I select it as:
  Select * from table (function (param1, param2))
  
  now I want to combine this with a table so that the settings for the service we get from the join table. Is this possible? And how?
  I tried different options without success.
  
  something like:
  Select *.
  table table (function (b.column1, b.columnb) x), tablea b
  where x.a = b.col
  
  Is this possible?
  
  Thanks in advance?

  user564819 wrote:

  something like:
  Select *.
  table table (function (b.column1, b.columnb) x), tablea b
  where x.a = b.col

  Is this possible?

  Somehow...

  SQL> create or replace type TIntegers is table of integer;
    2  /
  
  Type created.
  
  SQL>
  SQL> --// our sample pipeline simply spews 2 numbers for eevry number input - simple
  SQL> --// to use for the testcase below
  SQL> create or replace function FooPipe( n number ) return TIntegers pipelined is
    2  begin
    3          pipe row( trunc(n) );
    4          pipe row( trunc(n)*-1 );
    5          return;
    6  end;
    7  /
  
  Function created.
  
  SQL>
  SQL> with dataset( n ) as(
    2          --// ignore this part as it only builts a base table
    3          --// for us to use to select values for input to
    4          --// to the pipeline - in "real world" use this table
    5          --// will already exist
    6          select
    7                  level
    8          from    dual
    9          connect by level <= 10
   10  ),
   11  pipe_line( n, array ) as(
   12          --// we run the pipeline as a nested table column
   13          --// in the SQL projection - the CAST is important
   14          --// in order to establish the nested table type
   15          select
   16                  d.n,
   17                  cast(
   18                          FooPipe(d.n) as TIntegers
   19                  )
   20          from    dataset d
   21  )
   22  --// we now use a standard query to unnest the nested table column
   23  select
   24          p.n,
   25          pipe_val.*
   26  from       pipe_line p, TABLE(p.array)  pipe_val
   27  /
  
           N COLUMN_VALUE
  ---------- ------------
           1            1
           1           -1
           2            2
           2           -2
           3            3
           3           -3
           4            4
           4           -4
           5            5
           5           -5
           6            6
           6           -6
           7            7
           7           -7
           8            8
           8           -8
           9            9
           9           -9
          10           10
          10          -10
  
  20 rows selected.
  
  SQL>
  

  Not sure I like it. What is the real problem that this method (driving a pipeline with input of a base table rows) is supposed to address? There may be a simpler and more elegant approach...

• How to keep track of the lines that I add to a table so that I can update more later or remove them?

  A > the form has a set of field and text dropdown list entries.  After the user updates the data in a specific text, change field, I need to add their data to a table on the first time through.   There are many different games of entries that would each have their own line.

  B > later the user comes back and changes the data in a field.  I need to update this specific line with the new values.

  C > later the user returns and removes the data of one of the fields completely so I need to remove that specific table line.

  D > the user does not directly from the table.  The table summarizes the entries that are made in the text and drop-down list fields.  I need to be able to maintain the table in harmony with user input.

  I agree with the addition of rows in a table, but I do not know what's best for that lines are kept synchronized.   I've got a good amount of Java programming experience under my belt, but I have a few projects in LiveCycle.

  I'm quite willng to read if you have any reference material online for the management of dynamic arrays.  So far, the only information I have found is how to add and remove lines, but not how to keep track of them.

  Any help is greatly appreciated.

  Ah sorry missed that you do not use two tables.

  Do you use Extensible lines or is there a specific line for each set of data?

  You can just hardcode where data are intended - a data go into RowA. To the same output of the field, you would be just: table.rowA.rawValue = this.rawValue;

  You can use Global binding on the fields: the fields, take data entry have the same name as the fields in the table and then automatically updated data.

  For blank lines, you will need to check if there is data in the fields and if no data you can hide the line: RowA.presence = 'hidden ';

• Add track numbers to songs

  My iTunes has more 9 000 songs. Before the music of Apple, I would like to remove track numbers. (Currently the time I was 13, soi for thought that was ok) I have about 7 000 songs without track numbers. Now that I have the Apple music, any of my previously download music aligns to the top. Anyone know of a way to quickly download the track number information? I remember iTunes at some point, have a 'get track information' function but I can't find not long ago. Help me its driving me crazy when I download playlist and songs that I already have are added because it thinks that it is not in my itunes.

  File > library > get track names, but it will only help if you ripped the CD with the same library that you are currently using. If you have copied and pasted or deleted and imported, then you're probably out of luck.

  TT2

• Suddenly cannot select Audio 'Source patch' track

  I have updated to Premiere Pro 2015.3 of CC and were constant problems since then.  This time, I'm completely unable to select the main audio line in my projects, so can't drag any audio at all.  Video and secondary lines (rocking track) audio function normally, but when I try to click on one of the audio lines to the far left - nothing.  It worked fine two days ago now poof!

  Please help as soon as POSSIBLE.  I have a 30 minute program to change the time.

  Attaches with a reboot.   ??  I still want to know why it happened if someone has any ideas.  Have a good week.

• Point of the track is super slow when parsing

  Hi I have a little problem with the Track Motion function. Whenever I press the button 'Look forward', it starts monitoring, the eye in this case, but very very very slowly. I look at the various tutorials on youtube and all follow them pretty quickly. I am tracking 7 seconds of video, but it takes about an hour or two.

  Video: mp4. h.264 (Iphone 6 clip) of 1920 * 1080. However, I tried to restore to .avi or .wmw, but still too slow.

  My PC: Win 7 x 64, Intel i7 4970 K, 16 GB of RAM DDR3, Gtx 970

  Why is it so slow?

  Depends on your system and how you set up the tracker. A screenshot of your configuration of monitoring would be useful. A lot of noise, movements of camera, followed by the major areas, research areas, slow down all the follow-up.

• Map Module: How the "Next Track" and "Previous track" used?

  I shoot with multiple cameras with a parallel tracklog in a Garmin GPS unit and think that this feature can be useful, but there never seems to be enabled. How and when it is activated? It would be nice to have an easy way to scroll the ratings the way I imported without having to pick them through the most recent or the file system.

  Thank you!

  As far as I KNOW, the "Previous track" functions and "Next Track" allow you to scroll through all the separate tracks within a single tracklog.

  I think that the terminology can be kind of confusing.  There is 'tracklogs", which are the GPX or KML files.  Then there's "leads," which are the individual legs of data stored in the tracklogs.  I think that most people probably just record a track by tracklog, but hypothetically, you can record several tracks in a single tracklog.

  So, let's say you are on a shoot outside and you record your GPS tracks.  You thousand hiking, stop the track and then start a new track in the same tracklog.  This would give to ultiamtely you a single 'tracklog' file which contains two separate "tracks".  In this case, orders of "Next Track" and the "track" would let you switch between the two separate tracks in the tracklog.

  In short, my impression is that the "previous track" / "Next Track" only functions to navigate between multiple tracks in a single tracklog.  They don't allow you to scroll your tracklogs.

  I remember messages for a long time on this issue. People are wondering why the "previous track" / "Next Track" commandments were grayed out and wondering if it was a bug.  I don't know if they just misinterpreted these commands as switch between tracklogs instead of titles, or if the duties were actually not work correctly with tracklogs that had several tracks.

• Table is changing, function of triggering/can not see?

  Hello
  I had this error before, and I solved it with the help of this forum.
  But I didn't ask then why is - this error happening at all?
  Now I have it again, with different trigger:
  
  ORA-04091: table TRACKER. APPLICATIONS is changing, function of triggering/can not see
  
  My trigger code is:

  create or replace trigger "REQUEST_EMAIL_T2"
       after update of assigned_to_assigned_id
       on requests
       referencing new as new old as old
       for each row
  begin
          if :new.assigned_to_assigned_id != :old.assigned_to_assigned_id
       then
        for emp_rec
         in (select      username, assigned_email, form_name
            from      assigned, form_type, requests
               where  assigned.assigned_id = form_type.assigned_id
                    and assigned.assigned_id = :new.assigned_to_assigned_id
                    and requests.request_id = :new.request_id)
                  loop
             apex_mail.send (
                 p_to          => emp_rec.assigned_email,
                 p_from     => emp_rec.upline_email,
                 p_body     => 'You have been assigned a new Request. '
                                  || CHR (10)
                                  || ' Request: '
                                  || :new.request_id
                                  || CHR (10)
                                  || ' Type: '
                                  || emp_rec.form_name
                                  || CHR (10)
                                  || ' Login: '
                                  || emp_rec.username
                                  || CHR (10)
                                  || ' Pass: '
                                  || '******',
                 p_subj     => 'New Request'
            );
       end loop;
  end;
  / 

  The relaxation will compile without error. The error I get trying to update the table!
  
  I absolutely need to define a trigger as "after" update and need to know how to avoid the same mistake again?
  
  Thank you!

  But I didn't ask then why is - this error happening at all?

  Have you looked at the error message? It is very explicit:
  >
  ORA-04091: table String is changing, the function of triggering/can not see
  Cause: A trigger (or a plsql function defined by the user referenced in this statement) attempted to watch (or modify) a table that stood in the middle of being modified by the statement that shot.
  Action: Rewrite the trigger (or function) so it does not read this table.
  >

  Should this request to join the table of queries ? Does not look like it...

• What is READ the array returned by the DAQmx meter? How can I know the two functions DAQmx READ data stream in the same WHILE loop?

  I have a question about the order of execution.  In the WHILE loop, I have two things to measure, period and tension using the DAQmx READ functions for voltage and the meter.  In the end, I want to collect these data as points almost simultaneously as possible, as a pair and then send them together to another piece of code (not shown here) which them will result in some sort of command for an engine.  It would be run, and then I want to perceive the tension and the period at a time later and do the same thing.

  (1.) I'm a little confused on what the meter of the READ function is back because it's a table.  What is a picture of?  I thought that it was up to the value of the individual periods between rising edges.  The output of the counter 1 DBL d's a table. How many elements in this table, and what determines the size of this table?  Are the elements of the array the individual delays between the edges?  How many values are stored in the array by executing?   We take the AVERAGE of the last 15 items, but do not know if we are throwing some of the data or what.  How to understand the composition of this painting?  How can I change the composition of this painting?  Is it possible to measure only one period at a time, for example the time between TWO edges?

  2.) Will this WHILE loop execute as it gathers tension and a "period table ' (remains to be understood by me) by TIME running in a loop?  In particular, we want that the value of the tension associated with the value of the AVERAGE of the period "array", so we can use two data items to create orders of next control every time that the two values are reported.  The structure for the delivery of vi will be attached data in pairs like this?  I understand that one of the READING functions run not before the other function of READING in the WHILE loop.  I want that the period "means" and "strain (Volt) collected at the same pace. This vi will he?

  Thank you

  Dave

  Hi David,

  I suggest including the DAQmx Start Task function. If it does not start before the loop, it starts the loop and work very well, but it is not as fast and efficient. In the model of task status, task wiill go to run the checked each iteration of the loop and then back the time checked running when it restarts.

  The status of the task model: http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/taskstatemodel/

  Kind regards

  Jason D

  Technical sales engineer

  National Instruments