5.2 LR makes the images to choose the dominant dark, green-yellow color

Similar Questions

• How to make the text darker or bolder

  How to make the text darker or bolder in safari

  shutterbox-

  I'm with you.  Cataract surgery, it will take longer, and the thin, plugged in my humble OPINION, typeface they chose is really for less than 40 eyes.

  The same "BOLD" of the police system capacity would be so appreciated.

  There are 3rd party apps that can change system fonts, and I saw messages claiming success, but I'm a purist to try.

  Small fonts (to us) make it very painful to be here.  I just hope they realize that our needs must be met, as well.

• Make the PNG sequence with 256 colors and alpha.

  Right there in the topic, I can't understand it. You can only choose millions of colors and trillions of colors when you look at the depth in the output module. And even if you choose 8-bit per channel in the render settings always returns the 32-bit files.

  It is basically a white (pure) spinning star gradually fading so there is no need to make it with as many colors.

  What I am doing wrong?

  8-bit png does not have Alpha channels, they use based on the palette transparency by the marking of a specific color should be interpreted in transparent by the "rendering device / client" (browser or other). AE can not produce these types of files since it deosn work this way. You must use Photoshop or other tools to convert your image sequence / clip.

  Mylenium

• VISION and research - how to make the font darker and easier to read "Help".

  Recently had a good success to make the police clearer and darker in the Finder through this article

  http://www.macworld.com/article/2026699/stop-squinting-make-text-bigger-in-os-x. HTML with result

  as a result of these directions for Finder also increases the clarity of printing at the Mall and elsewhere.

  BUT what of the online manual that appears when using the search for "Help"?

  IS it there A WAY OF MAKING THIS DARKER/more CLAIR rather that the shades of gray that I am experiencing.

  Using a MacBook Air (mid-2013) Yosemite 10.10.5 - who says that my reading is not as good

  resolution than the models that followed.

  
  

  Reading others also eager to make the darker lighter text also, the eyes are bad after

  to see the lighter police force and it makes it less interesting to learn what this online

  Manual has to offer.  Please help if you can give me any advice on improving this situation.
  

  Try to open help and then use the command - + to enlarge the page.

• Make the text darker?

  Can we do darker text?  The default gray is hard to read on a white background.  Even the 'Arial Black' is a gray a little darker, but not black.  I know that we can choose our own police when we type, but can do us what we read more dark, preferably black?  Is it possible to do so individually through the forum that I'm missing or someone knows of a way to do it via a browser quickly and conveniently or can you people at Oracle get darker for those of us who have trouble reading it?  I know that I can do more easily through my browser, but it is still too bright and my eyes strain.

  
  

  Hello

  I must admit that on my laptop, the text is difficult to read in an informed environment.

  In the opera, I just choose 'high contrast (w/b)' and every color of text disappeared.

  There must be an add-on to do the same thing in FF.

  But you miss the point.

  Black and white is obsolete.

  Light gray on white is chic.

  Today, we focus on healthy youth.

  When Google uses light gray, how can a company connected like Oracle not follow?

  Amblyopia, Achromatopsia, protanopia, Deutanopia? Too bad! These people should use a screen anyway reader.

  (I have tested this site for different colour-blindnesses and some combinations are really hard to read.)

  I know that high contrast can be a problem for people with some forms of blindness of text, but those who may simply reduce the contrast of the monitor.

  Concerning

  Marcus

• How to make the second row in different color

  Hi gurus
  
  How can I make every second row in a different color.
  
  Thank you
  RGB

  Hello
  You can use the Type property of the bands of table.

  Thank you
  -Anil

• Try to make the simple disk image layer after doing the double layer image

  Hi all

  I wonder if you can help me.

  I just made an image of DVD double layer of a project and he created a 7 GB file. Now, I would try a simple disc image layer 4.7 GB, something I did with an earlier version of this project, resulting a watchable drive on a smaller TV.

  After 7 GB image, still don't make the 4.7 GB version but I don't understand why.

  Martyn

  Check these 2 things:

  Right click on your 'active' movie and choose "return to the original. This still allows transcode again at a rate less than fit on the smaller disk. Yet fortunately keeps your first version until you tell her to not to do so.

  The tab generate, have you changed the size of the disk (under 'disc info')?

• CAN MAKE THE IMAGE OF ITS SHARE IN A LIBRARY

  IN MY PROJECT, I WANT TO MAKE AN IMAGE OF SMALL PIECES OF PARTS OF THE IMAGE. I JOINED THE LIBRARY FILE WITH THE SMALL PARTS OF THE IMAGE AND THE ENLARGED IMAGE WISHING TO MAKE ON TOP OF PARTS OF IMAGAES. NY IFA CAN HELP ME ITS REALLY USEFUL... A THANKS IN ADVANCE...

  RAGIL

  RAGIL says:

  But here I want to insert multiple images to make a bigh image... so what's the next step?

  Do it in loops, where is the problem?

  

  Andrey.

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• Cannot make the fx color correction without getting the image of strobe

  Cannot make the fx color correction or blur fx with masks without getting the image to strobe. Do not return in the sequence, or export without the video strobe effect. It is clearly a problem since at least 2011 because I saw some forum posts dating back that far. Don't know how or why it is always a question 5 years later. I have the correction color fx on an adjustment layer that makes very well. Leave color and blur fx on a couple of individual clips is whats creating the problem. Does anyone have a solution? It does not appear that I can wait for Adobe.

  At this point, I would create a sequence for each clip (in the garbage, make a right click, create sequence and apply the FX it) then replace the clips in the mixture with the sequences.  -Test this point by one before they go crazy.

  OR, using the idea of sequence preceding above, return on a new clip with holiday color applied to replace as new originals in the mixture.

  Third idea: replace the clips with linked AE comp and try the color of leave which are.

  In short, do what you can to take the color of leave out of the final equation.

• How to make the color of the sky, exactly the same thing in multiple images?

  How to make the color of the sky, exactly the same thing in multiple images?

  Bengt Nyman wrote:

  I'm not trying to replace the sky. I want to talk to a group of photos BIF where the percentages of red, green and blue in the sky varies from a few percent, but enough to disrupt continuity within the group. I like t would be able to use the percentages of color to one of the pictures and replicated in others.

  Because the brightness of the sky probably varies from image to image using percentages RGB will not work. What you can use are the values of a and b the laboratory values . Right-click in the inside of the develop module histogram and tick 'Show Lab Color values.' You can ignore the value of L, which is the value of Luminance or brightness. Adjust the blue sky s a b valueusing the Temp WB and sliders dyed until they are the same as your first reference image file. The value determines the color red/green balance if you use the Tint slider to correct the value. The b value determines the color yellow/blue balance if you use the slider Temp to correct its value.

  Remember that setting the base Panel WB with 'fixed' values of b for photos taken under lighting conditions different sky will be the color of the other objects in the image look incorrect (birds, trees, buildings, etc.). In this case, you will need to use the brush setting to paint in the region of the sky and then use its temperature sliders and tinted to change just the color of the sky.

  To be honest I don't know why you feel it's necessary. Maybe you can post two screenshots: 1) with the sky that they way you want to and 2) an image that you want to resolve to match.

  

• When I go to file and download a picture that everything is fine, but when I go to the file again and try to load a second image makes the former disappear. Why?

  When I go to file and download a picture that everything is fine, but when I go to the file again and try to load a second image makes the former disappear. Why?

  From your description, I suspect that you have selected Open Documents as tabs in the Interface preferences section.

  Your first image doesn't go away, but is in tabs at the top of the images.

  If you prefer to see the images separately, uncheck the box of Documents open as tabs, as shown below

  

• How can I make the text in the image, like a signature in a corner?

  How can I make the text in the image, like a signature in a corner?

  Do you need to do it for a lot of pictures?

  Look closely.  It should be under file > processing of multiple files.  Make sure you don't overwrite your original files.

  If a single file, make a copy of the file, create your image in a separate layer and reduce the opacity.  Then flatten image and save it.

• How can I make the image that is within the rectangle to move?

  Hi, I'm doing a Web page with muse and I found the Coffee pastries Katie page. There are some pictures in the home pages this movement inside the form when I scroll the page. Could someone please tell me that how can I make the image that is within the rectangle to move?  Thank you very much

  You can apply the scroll to fill the picture or the rectangle itself if you are referring to scrolling rectangle on the page.

  https://helpx.Adobe.com/Muse/using/scroll-effects.html

  https://helpx.Adobe.com/Muse/how-to/explore-new-scroll-effects.html

  https://helpx.Adobe.com/Muse/using/applying-scroll-effects-browser-fills.html

  Thank you

  Sanjit

• Make the following Image?

  Hey community members.

  I want to know what is the easiest way to make an image like this phone. Was - this fact using InDesign? PS? Illustrator? I should draw something like that or can find a picture and some how to whiten the image?

  If you want to clean like that, it's probably best to trace it. You could do this in Illustrator or Photoshop.

  Sometimes you can get a good result with kind of correction color effects, but that all depends on your source image and your intent.