5 GHz network connection is much lower than the 2.4 GHz of E3000 connection?

Similar Questions

• Does anyone else have a problem with the left speaker is much lower than the right?

  Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?

  Hello, TopDog16!

  Welcome to congratulations on getting a new iPhone and Apple support communities 7.  From what I see in your post, you have any questions on the stereo speakers in your new iPhone.  I would be happy to help you with that!

  Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning).  The holes on the right are only speaker on this edge of the phone, however.  The other speaker in the pair is at the top of the phone, where the cut is, just above the screen.  Check here to see if sound comes out.

  This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications

  Have a great rest of your week!

• Why the 2d graphics score is much lower than the 3d

  upper graphical desktop score is significantly lower than any other partition on the windows experience index. The index is just a waste of time or is there a reason for this 1 score to be much lower

  upper graphical desktop score is significantly lower than any other partition on the windows experience index. The index is just a waste of time or is there a reason for this 1 score to be much lower

  The score is less on your computer because your video (graphics) card was obviously designed for its 3D graphics was paramount while 2D was a secondary function.  (You have a game system).

  What specific video card do you have?

• W530 full charge capacity is much lower than the nominal capacity

  I have laptop lenovo workstation w530 9 cells. Now it is 4 years old now

  I have observed that rcently that battery so quickly.

  A battery meter reset in settings of lenovo.

  It is said that "the State of the battery is good" and illustrated in green color.

  Full load: 38.34Wh

  voltage 12.26v

  power 9.44W

  Temp c 32

  cycle number 418

  rated capacity is 93.6Wh

  design of voltage 11.1V

  I didn't understand why so load the difference between a full charge and design. Is my battery in very good or need a change.

  Can someone help me please.

  'Good' means that it is unlikely to fail completely soon. Electronics indicates that all the cells work. However, the batteries have a limited life and they slowly deteriorate as they are used and recharged again and again. It is just exhausting. The reset is unlikely to help. The "fix" is to replace. Make sure you get one that is designed for the T430/T530/W530. Previous (T420, etc.) have the same size, but they do not work. Avoid spare ones. I think that they are unwanted.

• Cpu for vm resource stocks are much lower than the virtual machine in the list of resources

  I move a virtual machine from a PR, but I got this warning

  

  I checked and there was no reserve on the virtual machine and the destination THAT RP is set to Unlimited and expandable reservation

  any idea?

  See: VMware KB: the movement of virtual machines between resource pools triggered the warning: percentage of Incorrect CPU

• JPS-00080: credentials 12.1.2.0.0 store schema Version is lower than the latest version of schema 12.1.3.0.0, upgrade the store schema of credentials to the latest version.

  JPS-00080: credentials 12.1.2.0.0 store schema Version is lower than the latest version of schema 12.1.3.0.0, upgrade the store schema of credentials to the latest version.

  Hi all

  When you try to extend my domain, it fails with the above error.

  any suggestions on a fix?

  is this related to the Fusion Infrastructure ADF RCU utility?

  Thank you

  Hi JCGO,.

  Installed on your DB schema is 12.1.2.0.0, but the Extension of domain requires 12.1.3.0.0.

  One solution is to run the 12.1.3.0.0 UCR, fall of the existing on your DB schema followed by installation 12.1.3.0.0 on the DB schema, so that the extension of area Gets the 12.1.3.0.0 schema

  Something more is to open the template on which you spread the field. The models are present in ${MW_HOME} / oracle_common/common/models/wls, explore requirements inside the yourtemplate.jar and comment out the store schema version prerequisite credentials. This is not a good approach, but again, it's going to be a good solution since the schema 12.1.2.0.0 and 12.1.3.0.0 won't much difference.

  Thank you

  Shiva Shankar B N

• Assets of image import as a res lower than the source

  I have seen several posts similar to this discussion and have never seen a response. Whenever I attempt to ad an image, sometimes half of the original asset. I tried format PNG, JPG, Gif etc. and it's all the same. Years ago, when I used first Muse, it didn't happen. Just to put everything everybody some time, yes I'm saving the images correctly and the size/resolution 100% I'm looking. I did this for a loooong time. For example, I 1600x600px image at 72 dpi. Save the images in the same way and the same resolutions I would entrust to any developer.  My Muse file is located at standard resolution. I deselected retina, hoping that would solve the problem.

  What happens is when I drag the image a Muse W 1600px site, the image comes in about 1/2 - 1 / 3 of the original size. (Note: I also can't not proportional to scale while holding SHIFT as is the norm in Adobe products). I used really love using Muse for prototypes show customers, but for this reason probably, and my inability to get an answer, I gave up. Once and a while, like now, I'm, hoping things will work properly.

  Please let me know if you know what's the deal. kind of makes me crazy. It's used to work fine a few years back.

  If HiDPI is on images will be important to half size. That's how 2 x HiDPI works. A 1600px by 600px image will appear at 800px of 300px Dimensions in Design view and on screens in standard resolution. On a screen HiDPI image will always be physically the same size on screen, but 1600 x 600 pixels will appear.

  How did make you the image in Muse? File > Place and click on the page will bring the image in original size, unless it would be much bigger than the size of your page (in which case Muse will resize itself it down to manageable dimensions). If the image is used as a background fill Image sizing is controlled by the fill parameters (i.e. the scale to adapt, evolve to fill, etc.).

  Regarding the scaling proportional, for better or worse, the default behavior in Muse is the resizing of the images is proportional. If you want the disproportionate scale (free style), then hold down the SHIFT key. Note that this applies to the placed images and the images in the slide show. It does not apply to elements with a background image fill.

• Why disable SuperFetch on ssd, if the RAM is much faster than the ssd?

  Directed by Microsoft that SuperFetch and PreFetch must be disabled, if the OS is installed on an ssd, in accordance with article http://support.microsoft.com/kb/2727880. But SuperFetch is used for loading the data components of applications, which were very often used for RAM. Although the ssd is faster that a hard drive is not faster than the RAM. So, I do not understand why Microsoft suggest disabling this feature. The only reason why I want to understand, it's because of a limited RAM. If the RAM is sufficient beyond 6 GB, if we disable SuperFetch, then the boot time and increase the loading time of most used applications. I miss something here?

  The other question is about PreFetch. I feel, maybe wrong, it does the same thing with SuperFetch, with one major difference. It loads all the information data on the ssd or hard drive, instead of the RAM, in order to accelerate the launch of applications and time when the OS is installed on a hard drive to boot. If I'm right, let's disable the PreFetch it stores information for one ssd or hdd, while SuperFetch stores data of RAM information, which is much faster and so it must be enabled if there is a sufficient RAM.

  I look forward to reading the notice of a Microsoft software engineer.

  Hi Leventis,

  Prefetch copies frequently accessed files together into a contiguous on the disk area so that they can be located and loaded more quickly. That it takes a lot of old drives to recover data faster.

  SuperFetch predict what applications you run next and preload all the necessary data in the memory. She has also done that with startup files. And for all the three days he sends a defragmentation command to the OS drive that will cause problems in the SSD drives.

  In traditional hard drives (HDD) data are scattered throughout the disk, so that the operating system for access, it will take more time. It is suggested to perform a disk defragmentation. But storage technology is different in SSD, where, it records the data dynamically and it recovers more quickly. Who will be low down the burden on the RAM and the RAM can be used for uses such as for the opening of the games graphics high-end, etc..

  Hope this information is useful.

• Play the music of Dell Inspiron 15R sounds much worse than the game of Apple devices. How can I fix?

  I just bought Logitech Z506 speakers for listening to music from my laptop and the audio seems not as good as when my friend plug the speakers on his iPhone or Mac computer. The bass is much worse and the melody and singing is weak. Overall it sounds low coming from my laptop.

  I tried updating my drivers intel and nothing came of it. I am trying to update my realtek hd audio drivers this driver seems to come from the 21/08/2013, that seems to be old, but I don't know if it's going to do anything.

  The Inspiron 15R is supplied with a software called Dell Audio with MaxxAudio that controls the settings of. I do not know if that interferes with anything.

  Acesonnall

  I tried updating my drivers intel and nothing came of it. I am trying to update my realtek hd audio drivers this driver seems to come from the 21/08/2013, that seems to be old, but I don't know if it's going to do anything.

  You can switch backwards between your Realtek audio driver and the native audio driver Windows in this way:

  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  Acesonnall

  The Inspiron 15R is supplied with a software called Dell Audio with MaxxAudio that controls the settings of. I do not know if that interferes with anything.

  You should be able to disable these software or try different settings. Also try "Disable all improvements" by opening the playback of the sound properties, right-click on the speakers and click Properties, then select the enhancements tab and put a check mark in the box to turn it off.

  Acesonnall

  Inspiron 15R

  Then it should be one of these models: Inspiron 5520, 5521, 5537, N5110, or SE 7520.

• Remove values lower than the desired increment

  Hello

  When you perform a simulation of multi-body with a step size fix that I receive some additional values smaller than the normal increment in output data or values are duplicated. The time channel looks like:

  0

  0.0002738

  0.001

  0.002

  0.002

  0.003

  0.004

  ....

  I think that with a simple script I can remove the extra valuues (in this case 0.0002738, 0.002).

  E offer this code, but it does not work:

  Hello Fischerg,

  I would like to know how it works:

  Option Explicit
  Dim timechannel, CLength CNumber, dBase, limit, K, CurrValue, Epsilon, Delta

  timechannel = "[1] / TIME."
  CLength = Val (ChnPropGet (timechannel, 'length'))
  CNumber = NOC (timechannel)

  Epsilon = 0.00001
  Limit = 0.001 - Epsilon

  dBase = CHDx(1,CNumber)
  For K = 2-CLength
  CurrValue = CHDx (K, CNumber)
  Delta = CurrValue-dBase
  "Compare using the value of the Epsilon. Compare float numbers
  "with '=' does not always work
  If (Delta< limit="" )="" then="">
  CHDx (K, CNumber) = NULL
  On the other
  "Set new base
  CurrValue = dBase
  End If
  Next
  Call ChnCharacter (timechannel)
  'Delete tagged values. If there are more channels in parallel to the string "TIME."
  "those who can be adjusted with the same call. See the online help for ChnNovHandle for more details
  Call ChnNovHandle(timechannel,"","Delete","X",1,1,0)

• Why the imported videos have characteristics lower than the source of the videos?

  Hello!

  I do a video for the first time and am totally confused.

  I shot the videos with a digital SLR, videos 1280 x 720.

  I imported the video into Premiere Pro CS5, double click on a video imported so that it has been shown in a window, then I played this video, only to discover its quality was average poorer than the video source - color was inappropriate and there is more noise.

  What's wrong?

  I put the format of pixels in place, I will do 16:9?

  Any help will be rock :))

  Check the resolution of your reading. Its default value is set to 1/2.

  There is a button in the program monitor, it has three colors: red, green, and blue.

• Photoshop brush strokes are much smaller than the slider, need to do the same thing.

  My photoshop brush, pencil and duplicate tracks are smaller than the slider, making it very difficult for accuracy. Do not know what made them change, but you want the slider and the strokes are the same.

  

  I tried different settings in the dialog box of the brushes, with parameters of advanced differenc, etc., without any result. Also, tried different settings of the preferences/slider. No luck.

  Help!

  In the preferences (cmd-k) > cursors > painting, the parameter sliders should be Normal.

  'Reset tools' as described in the habit of posting 1 help. Have you tried yet?

  Gene

• Output is much brighter than the preview

  Hello

  I have a problem with the video output. As you can see in the photo below, the output is brighter than the preview. I use LUTs and export is H.264 without calibration or AutoCorrect. Is it possible to have the same performance in preview? It's really annoying to experiment with it - it mainly to lose a lot of time.

  

  Thank you.

  Hey, Filip.

  you see the 'brightness', is caused by the displacement of quicktime gamma.

  Please activate "automatic color calibration" in rendering for a right cause OR add a layer LUT with a 'Quicktime_gamme.ilut '.

  Automatic color calibration function compares entry & exit and automatically calculates and applies a lut of correction to avoid gamma shifts.

  Hope that helps,

  Duy Anh

• Move an item of text lower than the rest.

  I'm wet behind the ears here and need a

  step by step instructions on how to move the 2 in H2O slightly

  less than the rest of the text. I have a background layer that must

  to stay blue.

  There may be several ways, but a simple method is the following:

  1. Select the text (T) tool.

  2. your visible CHARACTER Panel by selecting window - character

  3. click on your layer text and using the mouse select just the 2 in the chain of H2O.

  4. in the CHARACTER Panel, put a negative value in the baseline shift box bottom left.

  5. you can change the size by changing the value in the font size at top left as well.

  

  -Christmas

• Windows Experience Index score is low... much lower than I think it should be :/

  

  Hi guys and girls (maybe not so many girls so: P)

  I built my PC around July 2014 and even if I don't use all of the resources I have to my advantage, I intend to use its FULL potential in time to come...

  I built it to do programming, games and Visual editing (in the future) and design.

  I've ALWAYS wanted a liquid cooling and they make it so easy to install, configure and set, not to mention affordable that I went for it...

  I bought the main in order to comply with the new processor "Broadwell" card soon, so I opted for an i5k in the meantime...

  I tweaked and tested (VERY careful I might add) CPU clocks, clocks (voltage Inc.) of memory and GPU clocks (Graphics), BUT...

  I can't get the partition Win Exp Index to 7.9, which I think is unfair! :. (

  I run 3 x 120 mm cooling fans & 1 large liquid CPU cooler cooling to between 1000 to 1500 rpm continuously (gears arranged by fan to create "Forced Induction", to the CPU and the GPU. Thus the two almost never slowed down more than 28' C.

  I have overclocked the processor to 4.5 GHz (Stress tested for an hour and NEVER saw a 55' C). He had @ 4 GHz before so that the cooling fans quieter, but I play with time clocks and the Exp Score win is like a splinter. I can safely 4.6 GHZ clock, but fans fluctuate a little to much for my taste.

  .. then why is my Win Index Score 7.7?

  The score does not change after the settings (clock speed, fan speed)...

  I have overclocked GPU 'Gigabyte GeForce 750Ti OC Version' 1072 (base) 1150 (BOOST) MHz and 2000 RPM @ idle fans. -Without changing partition :(

  I have overclocked memory to 1800 MHz @ 1.62V, which increased the partition Win Index of 7.7 to 7.9 (didn't want to OC it, is fine for my use at the time, but I want to score!)

  Windows really calculate the speed of the CPU, or should I just use the basic CPU specifications?

  On the GPU, it's the "Maxwell" card more slow (to my knowledge), but I have overclocked it to Win Index partition...

  I ran "Catzilla" and the GPU score a 100% before the overclock, the CPU score is 90% @ 4 GHz and "IS" 100% currently to 4.5 GHz.

  Hope you can give me a nice thorough answer on the measurement taken by Win Exp Index procedures.

  And when the "Broadwell" CPU is loose, I will receive the same score when I buy the specification "i5 k?

  Have a good day and thank you in advance :D

  There is absolutely nothing wrong with these numbers even if they were representative of the actual performance.

  As Zig - Zag has already said, they are a GUIDE and a guide is not particularly accurate at this. If your computer's performance are good, and I suspect it is, continue to use it and stop worrying about WEI... :-)