5 ghz not listed is not on the Airport Express

Similar Questions

• Can not update the settings on the Airport Express

  Currently have a facility - two extremes and an Express network.  I for the life of me can't update the Express settings. I always get an error message but I can update the settings on the two extremes very well. I can make changes to the Express with my Iphone but I can't with my Imac.  I want to activate the function of 5 GHz but I can't do that via my Iphone - with the desktop app I think.  Can someone help me?

  Let's first check and make sure that on which Airport Express version you have.

  Your version of the AirPort Express is there only 1 or 2 Ethernet ports?

  The Express to connect to your network and extend it wireless?  Alternatively, the Express connects to one of the extremes airport using a wired Ethernet cable connection.

  Then, I would be not too concerned of not being able to 'see' the Express of the iMac as long as you can access the settings of the iPhone. You can make almost any change using the iPhone you can use a Mac.

• Software JetDirect 380 X can not see the airport card in the laptop G4 PPC

  Hello

  I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport.  So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.

  Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8.  I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.

  Thanks for any advice.

  Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 115 & prodSeriesId = 29789 & prodTypeId = 18972 & prodSeriesId = 29789 & objectid = c00257796

  Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?

  To close, but I thought a few times.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• iPhone not recognizing only no internet after installing the new cable router attached to the Airport Express Terminal.

  My configuration is modem cable to Airport Express which is connected wireless to a Time Capsule.  I am able to surf with my laptop, it's the iPhone 5 s is no longer is grateful for the internet.

  When I turn off the wifi on the iPhone, Airport utility displays only the Internet icon with the green light. The cable modem has no possibilities of wifi so I do not understand to THE.

  When I turn on wifi, the wifi devices present with green lights and the internet shows a yellow light.

  Through the different ways for a solution.  Power cycling my net and telephone.  Forget this network don't forget the password and I have to choose the wifi and enter a password. Still seeing internet.

  Why should you have the Airport Express? The Capsule is also a WiFi router.

• Photosmart 2610xi not connect to Airport Express Terminal via USB

  I recently bought a MacBook Pro and the Airport Express.  In the past my Photosmart 2610xi was connected to my Mac Mini with a connected Ethernet cable directly on my Linksys router.  I tried to connect my printer to the Airport express with a USB cord, and while my Airport Express is the printer can't seem to connect.  When I print something the document hangs in the queue with the words 'connection '.  Any help would be appreciated.  Thank you.

  Why are not you connect the printer to the airport with Ethernet?  It is the only way to get both printing and scanning.  USB will support printing only.

  Have you tried to delete and add the printer in the print queue:

  -Sys Prefs, Print & Fax
  -Select the printer in question and click the sign less down the list
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, do the same thing, only instead of the second stage, right (control), click the box of the print queue and select Reset Printing System.

• New airport Time Capsule is not connect to Airport Express more.

  When I just upgraded my Airport Extreme for a time Capsule of the airport, I lost my connection to the Airport Express connected to my stereo to allow playback Airtunes wireless. Airport utility is really different and shows that the new ATC.

  Help?

  -Stew

  Ok. It seems that my Express and my old extreme are no longer supported by Apple? Come on guys! I tried the Airport utility download stuff to my phone, but that did not work. Alternative workaround so I did not in the trash with a value of $400 of perfectly functional base stations? I just want to have Airplay again. GRRRR.

• The AirPort Express Terminal is good enough for me?

  I need a new wireless router to replace my Netgear WNDR4300 'antiques '.  The network is only 2-3 laptops and iPhones 1-2 at a time, over a printer and Chromecast device.  We occasionally video stream, but not often.  Critics say the AirPort Express is best purchased as an add-on to an existing network, but I can't justify more expensive options from the airport.  I don't need the 11ac 802 that offer other options, and it seems that margin would be a problem, because it is limited to 5 GHz.  We have a two-storey house. Is the simple terminal AirPort Express good enough for my home network?

  The AirPort Express, pourraient deliver similar performance to your old Netgear router in terms of signal strength and the beach... but the only way to know with certainty if the Express will be good enough for your needs is to try in your home.

  Try to locate the Express up high on a shelf or Cabinet, if you can, to help in the dissemination of the signal.

  Fortunately, if you buy through Apple, you have one day 14, no questions asked return privilege, so if the Express does not provide the performance you need, you can return the unit for Exchange or a refund.

• Is the Airport Express optical fiber compatible? (Verizon Fios)

  Is the Airport Express optical fiber compatible? (Verizon Fios)

  Verizon wants me to have one of their routers. Is it necessary if I already have an AirPort Express?

  The airport is a router, not a cable modem. Verizon are likely to provide a cable modem that is also a router, and therefore has an entry for the cable and several outputs ethernet; It can also have wifi.

  You can probably turn off wifi if you prefer to use the airport; and there is nothing prevents to connect airport entrance to one of Verizon output using its wifi and ethernet ports. As long as it is reasonably recent, it should detect that it is connected to a router and configure properly.

• Connect a printer non-airprint for the Airport express

  Can I use an express train from the airport as a stand-alone wireless network to allow printing from an IOS device.  I want to connect an AirPrint not printer to the usb port on the Express with no ethernet cable is connected and so no internet and use it as a printer from an IPhone?

  My main questions are

  1. a no AirPrint printer allows printing from IOS using the Airport Express Terminal

  2. If so, the Airport express can not be connected to the internet?

  Thanks in advance.

  1. a no AirPrint printer allows printing from IOS using the Airport Express Terminal

  Actually, no. Connect a non-AirPrint printer to the USB port on the base station will NOT make it capable AirPrint. In order to print from a device iOS on this printer, you need to a third party (such as the Printopia) application running on a Mac.

  2. If so, the Airport express can not be connected to the internet?

  Function of the Express print server does not have Internet access at work. In other words, you can have the Express create a local wireless network, connect a USB printer and share the printer on the LAN. However, yet again, if the printer is capable non-AirPrint, iOS devices will not be able to print directly to it.

• Is it possible to use the AirPort Express to AirPlay only? (Wireless)

  Hello

  I have a speaker and I would empower AirPlay for it. I have an old airport express here in my house and I wanted to plug my express from the airport to my wireless network and allow the airplay.

  The only thing I don't want to not remove is the possibility to extend the wireless network, because I'm pretty sure it will do more bad then good, since I was a big of AC very close to the speaker wireless router. (http://www.asus.com/us/Networking/RT-AC5300)

  Is it possible to use the Airport express only airplay? Without trying to extend my network?

  Thanks in advance!

  Kind regards

  Tiago

  Yes, if you have the main router near the speakers... then simply plug the Express into the enclosure of the ethernet... Run it in Bridge mode and turn off wireless... Then check if you can find it in iTunes etc to send the stream of airtime.

  Or you can configure it to join a wireless network... it will not extend... Apple call it client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• How to configure a printer without wire of Canon (MG4150) to the Airport Express

  In my living room, I have a cable modem that is configured in Bridge mode. On the first floor in a room, I installed an Airport Express station. Everything works well except my printer Canon (MG4150) does not work. What is the solution for my problem?

  This Canon printer supports wireless connectivity, should just be configured to connect to the wireless network provided by the AirPort Express. Is not the way you currently put in place?

• iPhone 6, connecting to the Airport Express wifi, blocking all the other wifi equipment.

  Hello

  My home wifi network, it's an Airport Express station. I then several other devices that connect to it - two AppleTV, two MacBooks, an iPad and iPhone two 6.

  I recently had to replace one of the iPhone 6 and every time the iPhone connects to wifi of the Airport Express - the connection made the deadlock on other devices. This forces me to turn off the phone's wifi and now I do the connections of the hanging of the other devices start to work.

  The new iPhone replacement to restore a backup to iCloud. I also then reset the network than the iPhone settings when I first noticed this wifi connection problem, but the problem persists.

  Thoughts on how to fix this?

  My solution, after two devices, and visits to the Apple Store Genius bar was to do a full reset of the device and do not restore from a backup.

  For the appliance swaps were probably not necessary had we done the software reset and restore from scratch first.

  Geniuses and I were not able to find the cause of the problem.

• How to connect the Airport express as an Extender for airport extreme to El Capitan

  I have a model extreme A1521 airport and a model express airport A1392 and upgraded my OS to El Capitan. I want to use the express as an Extender for the extreme because my old House is long and has thick walls. My problem is that Airport utility will not 'see' the express, regardless of its proximity to the main router (extreme). I tried to move and reset.

  Of course, as soon as I get the utility to see, I need instructions on how to configure the express as a booster for my extreme.

  Any ideas?

  Unplug the Express and put it in the same room as the AirPort Extreme.

  Put power on the Express for a few minutes, then hold down the reset button on the back of the Express for 7 to 8 seconds and release.

  Allow a minute for the Express to restart

  

  Click the WiFI icon at the top of the screen of the Mac

  Look for an announcement of the new AirPort base station

  Click directly on the AirPort Express Terminal

  

  When you click on AirPort Express, the "Wizard" will open and take a few seconds to analyze things, and then see a screen that looks like the figure below, except that you can see your cameras.

  

  Type a short and simple name that you want to call the Express

  Click next

  The installation wizard will take care of everything for you

  When you see the message Setup is complete, unplug the Express and move to halfway between the AirPort Extreme and the area of the House that needs more coverage of wireless signal

  Turn on the Express and you're all set

  Important note... the Express to expand the quality of the signal it receives. About half of the potential speed on the entire nextwork is lost when you extend using a wireless connection between the airports.

  It would be much better if you could connect the Express to the extreme by using wired Ethernet wired, permanent, since there is no loss of signal via the Ethernet cable and there is always a lot of loss of signal through the air, the (thick walls especially) walls, ceilings, etc.

• How can I get the AirPort Express 1 utility generation? I lost mine.

  How can I get the AirPort Express, the utility of 1st generation? I lost mine.

  Open the App Store on your device, then press Search at the bottom of the screen.

  Then type: airport utility in the search field of the screen top.