5 in 1 T500 card reader

Similar Questions

• Experiences of T500 and card reader

  Hello

  I think around to replace my HDD with a SSD Intel so I also read a lot about this different storage technology. Later, I came to the result of attempting moving $TEMP, $BROWSERCACHE and $PAGEFILE for a cheaper Flash. Why not use the card reader integrated?

  Someone with experience in the execution of the build in the card reader (RICOH)? I can't find any Tech specs for this device and so I have no by an expensive sandisk sdhc extreme iii 30 MB/s or anything else where there is a slower card reader built in.

  I woulb gladly about some results "benchmark" of your sd, sdhc, mmc cards in the reader build-in.

  Thanks, Ronny

  I tried a SATA CF adapter in the UltraBay slot. My Lenovo is not recognized-, but it works with a USB adapter to SATA (at low speed).

  In my view, card reader is not a solution for my task. It is very possible to be too slow for the paging - now I'm going to see how long lives the SSD.

• Card reader blue screens

  I have three Thinkpads with integrated card readers: a X 61, a R61 and T500.  All have been running Windows 10 for awhile; all are on the ring 'quick compilation.  And for several months, all three have the same unusual problem when using the card reader.  If the card is formally ejected through the windows, or if the card is simply deleted, machines with a blue screen failure WORKER INVALID.  It is always reproducible on all machines.

  I tried different drivers Ricoh fished from the web without affecting the question.

  After scratching my head for several months, I'll ask if anyone has any ideas for a possible cure.

  Art

  Generation of today 14959 claimed - properly! -that this problem has been fixed. We are happy!

• In the W510 chip card reader

  Hello

  I have a w510 with a smart card reader and I want to Know wich card can use and how to use it to improve safety.

  Sorry for my English because I am from the Brazil.

  Thank you

  Antonio

  An article to read here.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410-what-can-smart-card-reader-do/Ta-p/701...

• Lightning to a resolution of the camera the incompatible SD card reader image

  I use the lightning to drive camera SD card with my iPhone 6 more (iOS 9.3.5) and MacBook Pro running Photos:

  Version 1.5 (370.42.0)

  Digital camera RAW 6.20 (856)

  Digital Camera Support RAW 6200 (233)

  Import RAW files from my Olympus EM10 on my iPhone, and then when I discovered the images in the Photos on my Mac I see incompatible resolution information.

  These are two consecutive images taken with identical settings...

  

  Drag the two images of Photos on my desktop (export in JPEG) then they have the correct resolution information...

  

  Also interesting. If I import these pictures directly on my Mac via the built in card reader, I do not see this problem.

  OK - when you import on an IOS device (the exact details are better ask in the forum iPad since it does not involve the Mac or Photos for the Mac somehow - it's strictly an IOS feature) in certain circumstances the maximum resolution is 2400 x 3200

  Your best solution is to import directly to your Mac

  LN

• air2 and iPad photo card reader

  I have an iPad 2 air. If. Load my photos on my iPad with the apple photo card reader / accessory... I'll be able to remove the ones I don't want iPad? and I can create folders on the ipad? Or do I have to use my PC for this? Thank you

  kathrynfromcarp wrote:

  I have an iPad 2 air. If. Load my photos on my iPad with the apple photo card reader / accessory... I'll be able to remove the ones I don't want iPad? and I can create folders on the ipad? Or do I have to use my PC for this? Thank you

  You should be able to remove them. I can't tell you for sure because I don't have a reader, but I suspect that the photos will land at film and anything in Czech Republic, you can remove the iPad.

  As for your second question, Yes. You can make Albums on the iPad. The albums will contain only pointers, the photos will remain in film in order not to remove it. The albums will be more enjoyable you can rearrange the order of the pictures by dragging them.

• Any card reader (driving us license and insurance card we) smart is available for iOS Device?

  I want to develop an application for iOS iPad kiosk for patients where patient can check-in in slippery sound driver's license or insurance card by card reader please suggest me if these (reader) hardware available that can be integrated with iOS app.

  I know it is a barcode scanner because I've seen it used in the elections, a couple of years.

  And there is magnetic tape (square) scanners that people use with their iPads.

  You may simply wish to Google and see what happens. Your question is somewhat a matter of niche, so may not find many answers here.

• El Capitan has taken my SD card reader

  Since my upgrade to El Capitan last week, my sd card reader does not work. She is not in the hardware. I did the reset where you unplug for 30 seconds. I did the control + apple + r + thing p and the card reader worked for only a few days. I can't do nvram and smc reset whenever I want to use the card reader, and I hate to use an external USB card reader.

  My card reader works fine on my 2011 27 "iMac. Have you tried using different cards, and if so have you seen changes?

  If for any reason, you are card reader does not work, then buy a card reader external USB and that should work well.

• My USB 3.0 internal card reader SD and bus have both work to quit at the same time. Need help in restoring

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. Buses from USB 3.0 and player appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the USB 3.0 Bus and drive? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  
  

  OS X Yosemite: If a USB device does not work

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• Needed: Thunderbolt for MB Pro slot SD card reader (built in does not work)

  The SD card on my MBP player worked for about 3 connections and died, and looking for here and also reveals, this is a common problem.  So rather than money to waste trying to fix this, I want to just find a simple card reader SD with a thunderbolt connection (I already understood that there is NO firewire drives, my MBP is not USB3.0 and USB 2.0 is much too slow).

  So far, I found a couple of features devices/hubs with connectors USB 3.0 as well as love at first sight, but I want just SD-> love at first sight (must be smaller, cheaper and less complexity to break a day).

  So: recommendations for a SD card to the connector Thunderbolt?

  What year, make and model machine do you use?

• Lightning to SD card reader

  I am looking to buy a Flash SD card reader cable. While searching I came across two similar wires:

  1 lightning Apple SD card reader and

  2 SD card card reader from Apple for camera reader SD Apple Lightning lightning

  Can someone tell me if they are a single and even if you please. Thank you very much.

  There is this one http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

  and it will let you import pictures from camera sd cards and that's all, you can not install applications and run from it or the likes.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• I don't use iPhoto and I want to keep it open automatically when I plug in a device or card reader

  I don't use iPhoto and do not want to open automatically when I plug a card reader or device.

  While the device is connected in Photos, clear the check box to use the pictures from the camera

  LN

• card reader

  Hello

  Bank of mine I have to access the usb card reader, every night is not the card reader. This will make the product not so use full for example to the Netherlands. Here in the Netherlands banks use these PKI cards to identify the end user.

  Concerning

  Eddy

  Nightly Win 64 is far from being a beta version - it's like an pre-alpha , without date version to be released.