Experiences of T500 and card reader

Hello

I think around to replace my HDD with a SSD Intel so I also read a lot about this different storage technology. Later, I came to the result of attempting moving $TEMP, $BROWSERCACHE and $PAGEFILE for a cheaper Flash. Why not use the card reader integrated?

Someone with experience in the execution of the build in the card reader (RICOH)? I can't find any Tech specs for this device and so I have no by an expensive sandisk sdhc extreme iii 30 MB/s or anything else where there is a slower card reader built in.

I woulb gladly about some results "benchmark" of your sd, sdhc, mmc cards in the reader build-in.

Thanks, Ronny

I tried a SATA CF adapter in the UltraBay slot. My Lenovo is not recognized-, but it works with a USB adapter to SATA (at low speed).

In my view, card reader is not a solution for my task. It is very possible to be too slow for the paging - now I'm going to see how long lives the SSD.

Tags: ThinkPad Notebooks

Similar Questions

  • Satellite A300 - dvd, usb and card reader does not work

    Help needed please.

    Have a laptop Satellite A300, running vista.

    Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it. The card reader can't find anything on the card (and Yes, the card was full.)

    The usb scanner is recognized as an external memory card and the other usb port does not fuction.

    I have not installed or don't remember changing of settings or do whatever it is the habit.

    Any help or thoughts would be appreciated.

    Hello

    Your ad is very confused.
    > Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it.
    Well, there are several reasons for this; It would be possible that the inserted disc is not completely compatible. Try different drives from different manufacturers.
    It would also be possible that the STRANGE laser lens is dirty. In this case, you might clean using a cotton ball and alcohol tip. In my case it helped.

    > The card reader can't find anything on the card (and Yes, the card was full).
    Did you use a compatible card? The laptop runs these cards:
    8MB - 2 GB SD card
    SDHC - 4 GB card
    -16 MB - 2 GB xD Picture card
    Memory Stick - 8MB - 256MB
    Memory Stick Pro - 256 MB - 2 GB
    MultiMediaCard - 8 MB - 1 GB
    miniSD (with SD adapter) - 32 MB - 2 GB

    I recommend also to format the card and to copy files from computer, and then test this.
    You can also reinstall and update the driver for the card reader controller...

    > The usb scanner is recognized as an external memory card
    Can't believe that you must use a scanner software (must be provided with the scanner) and have to test this unit. By the way; for the most part a scanner driver must be installed in order to use this

  • Qosmio X 300-126 - driver for FN keys and card reader

    Hi guys,.

    I have improved my Qosmio X 300-126 to win 7 and installed all the drivers (from the toshiba site) and updated my bios and the optical drive (dvd drive) and the thing is that

    Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
    And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.

    Help, please.

    Hello

    > Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
    I had the same problem after upgrade to windows 7, but the solution is pretty easy: just install the latest Toshiba Value added Package and Support Utility for Windows 7 Flash cards. If it s is not no for Windows 7 on X 300, just search by Satellite L500 and download them it worked for me! :)

    > And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.
    You need to download card reader driver. You can find it on the Toshiba site too. :)

  • Tecra S1 - USB ports (all) and card reader does not

    Hello

    Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

    Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

    See you soon

    Hello

    Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
    In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

    Good bye

  • Y50-70 - USB Reader and card reader no longer recognized

    I have Lenovo Y50-70 (running Windows 10) and my WD My Passport Ultra external drives are more recognized (they worked fine until 3 days ago). My card reader CF is no longer recognized either. My Samsung Galaxy S5 works well.

    The WD My Passport drives Ultra both my card reader still work with my older ThinkPad, which works in Windows 7. This isn't a disc problem, or a cable problem.

    When I look in devices and printers, the WD My Passport Ultra appears. It has the following warning sign for troubleshooting option. When I troubleshoot it comes back telling me that the driver is not installed. Continuing, he finds the driver, install it and asks to restart the computer. After the computer restarts, the drive still does not appear.

    When you look at the properties of the drive, it says that the driver is not installed and an error code 28 the list.

    Comment to Moderator: The model is added to the object for clarity.

    fgossieaux wrote:

    Thanks Bill - Sorry for not being specific. Both my WD drives (which have no external power sources) that my card reader does not work. I tried to remove the drivers and rebooted the computer, but none of it works.

    You can try to restore to a date (three or four days before the problem) and see if you have the problem solved.

  • Aspire 5562 camera, touch pad and card reader does not

    Hello world!

    I had an upgrade recently with my Aspire 5562 to Windows 7 and everything seems to work fine except the webcam, card reader and touchpad doesn't have function of scrolling even if I can use it partially. Anyone know where I can download the drivers? I don't see no 5562 support here in the drivers download page.

    Thank you very much!

    Unfortunately, this seems to be an older unit that is no longer supported by the system of drivers.

    Online search for chipsets/hardware drivers with that you are having a problem probably will produce results.

  • USB not port not working and card reader doesn't work is not on my desk.

    My usb port and built-in card reader does not work on my desk, also my external speakers do not work. stakeholders work with my laptop, it is not connected via USB.

    Hi yankee7,

    · You receive an error code or error message when you connect a USB device?

    · Do you remember recent changes made to your computer before the show?

    · What is the number and the model of the computer?

    · What is the service pack installed on the computer?

    Check the status of the device in Device Manager. Follow the steps below:

    a. click on start

    b. in the run box, type in devmgmt.msc

    c. expand USB bus controllers

    d. check if no yellow bang is listed (double-click on the device with a yellow bang for the error code)

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • satellite a200 - 14 d and card reader drivers for windows 7

    Hello
    I recently installed windows 7 on my toshiba a200 - 14 d I have problem with card reader. It doesn't work because I do not have drivers. Pls help!

    Hello
    Try it with the flash media driver for win XP for your model.

    Works fine on my satellite a100.

    But the FN keys still don't work :-(

  • IPCC Express and card reader?

    Nice day

    It does not explicitly say in the documentation so I guess it is not taken in charge. Just to check, it is possible for the IPCC Express feed reader/wall card data (number of calls on hold, loan officers, etc...)

    Thanks in advance.

    Yes, it is possible. Take a look at the following links.

    http://Newsroom.Cisco.com/DLLs/partners/success_stories/2005/pss_09-21B.html

    http://www.inovacorp.com/

    http://www.Sentinel.com/prodlibrary.asp?subnav=utilities

    I hope this helps. If so, please indicate the position.

    Brandon

  • Support for XP Driver for Modem and on Satellite U300 card reader

    Hello

    I got my laptop Satellite U300 of ot Vista XP. Now I am facing some problems.
    I could not find any compatible driver XP from Toshiba on Modem support and card reader. Is it available? If Yes please let me know the link for the same thing. Thank you.
    Rajeev

    I Don t know where your problem... I checked out the Toshiba drivers & download site and found all THE drivers, including your (modem and card reader).

    So, please, go [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] and download the driver of modem/card reader.

    She's.

    Greetings

  • HP Pavilion G6-2260sh card reader and video driver for win7 64 bit

    Hi people!

    I need drivers for HP Pavilion G6-2260sh video and card reader driver for win7 64 bit

    Can someone help me?

    An error message appeared so I tried the above utility to describe what driver I need.

    Semms that it's the final solution: 13-4_mobility_vista_win7_win8_64_dd_ccc_whql

    Now really perfect thanks!

  • Re: Satellite A210-19 WinXP SP3 Card Reader/Buletooth question f

    Hello.
    I have laptop Satellite A210-19 f and I can't read any card in my player card on WinXp SP3.
    Utils installed SD and card reader controller.
    It does not work. Also my bluetooth does not work too. After installing bluetooth monitor noething happened.

    Any suggestions?

    _Regarding SD card problem: _
    Go to Device Manager, remove the SD card reader, restart the laptop and reinstall the driver from SD card.
    The problem could be that XP drivers are not released for the A200 PSAELE series.

    In this case, you will need to use the Flash Media Driver of Texas Instruments, which was released for other series.

    _Regarding the problem of Bluetooth: _
    BT monitor is not the driver!
    You need the battery Bluetooth!

    You can download here:
    http://APS2.toshiba-tro.de/Bluetooth/

    Good bye

  • Internal card reader & USB ports stop working in Windows 7 64 bit - HELP

    This seems to be VERY popular problem between Vista and 7 users. I can't find the right difficulty any where. I have a HP Pavilion of D5200T running Win 7 Home Premium 64-bit. (I can provide more specific if necessary specifications). I read a few other posts in this forum with exactly the same problem as me, I tried the suggested fixes - most of them anyway - and my problem persists.

    This is the story of the kind: bought PC Cognac nine in June 09. It came with Vista Home premium 64-bit. On the front panel, I have the HP 15 in 1 reader cards and below that another panel with micro/headphones, 2 USB ports and 1 port Firwire catches. They all worked great worked great, no problem at all. I bought Windows 7 and improved in October 09. These two USB ports and card reader have been in place since then. I turn on the computer or restart works and they. Slide into a car SD, CF, whatever it is. Little green light turns on, windows automatically opens on the screen indicating the contents of the card.

    The card reader is no longer everything first. It may be 15 minutes later, perhaps hours. I slip on a map and still get the little green light but nothing on the screen. As if no card has been inserted. 2 USB ports will do the same thing, just much less frequently. I step a USB item and I have an error message saying: is not recognized or not installed properly. If I restart - they are all back to work very well.

    So... this problem only started after the Windows 7 installed, then it is clear to me is where the problem lies. When card readers or USB is in their State of non-working, I'll go to Device Manager and see that they are always listed, and there is no indicator of errors.

    This is what I remember by train so far, without success. I uninstalled devices from the Device Manager, driver too. I tried unplugging them from the card, restart, reconnected, reinstall. I tried different plugs on the motherboard. I can't find the latest drivers. The courses are MS 21/06/06 6.1.7600.16385. I think I tried all utilities integrated in Win7 to try and diagnose, and none of them produced no results. I tried to disable the sleep function. I even reached out to HP support, and the best they have resulted so far is that the card reader is bad. They are sending me a new, but I do not think that this problem will be solved.

    As I said, I see this problem or similar to many, many forums but I have rarely seen a happy ending where it was fixed. Someone at - it the key? Help, please.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • air2 and iPad photo card reader

    I have an iPad 2 air. If. Load my photos on my iPad with the apple photo card reader / accessory... I'll be able to remove the ones I don't want iPad? and I can create folders on the ipad? Or do I have to use my PC for this? Thank you

    kathrynfromcarp wrote:

    I have an iPad 2 air. If. Load my photos on my iPad with the apple photo card reader / accessory... I'll be able to remove the ones I don't want iPad? and I can create folders on the ipad? Or do I have to use my PC for this? Thank you

    You should be able to remove them. I can't tell you for sure because I don't have a reader, but I suspect that the photos will land at film and anything in Czech Republic, you can remove the iPad.

    As for your second question, Yes. You can make Albums on the iPad. The albums will contain only pointers, the photos will remain in film in order not to remove it. The albums will be more enjoyable you can rearrange the order of the pictures by dragging them.

  • Any card reader (driving us license and insurance card we) smart is available for iOS Device?

    I want to develop an application for iOS iPad kiosk for patients where patient can check-in in slippery sound driver's license or insurance card by card reader please suggest me if these (reader) hardware available that can be integrated with iOS app.

    I know it is a barcode scanner because I've seen it used in the elections, a couple of years.

    And there is magnetic tape (square) scanners that people use with their iPads.

    You may simply wish to Google and see what happens. Your question is somewhat a matter of niche, so may not find many answers here.

Maybe you are looking for

  • IMessage: "Message cannot be send.

    Hi evryone, Sorry for my English, I hope you understand my problem. To start, I want to say that I already called apple, but they don't remember after too unsuccessful manipulations on my mac. So there is my problem: When I want to send an iMessage,

  • Discrete matrix of Kalman filter parameters for higher order system

    I try to use the discrete block of Kalman filter in the control and the Simulation Toolkit for a second order system. I've been through all the example for this block in the examples NOR but most of the examples primarily use a first order system. I

  • Find physical limits without limit switches.

    Hello I have a mechanical system which is operated by a motor without Stricker of CC of enslavement. It is a very small system and close is not possible to place the micro swithces in it. But I must find its limits before and back. How can I find its

  • Audio HDMI only

    I got a new Dell Studio laptop. It has an HDMI output, which does not recognize that it is plugged into an Ampliphier. I guess it'll work out fine when it is plugged into a TV, but I need only the audio to work. I went to my sound settings and it say

  • Admin profile does not load

    Clicking on the icon Admin displays a message saying that the profile cannot be loaded and the system disconnects.  How the admin profile can be recovered?  Cannot change the Standard user to an administrator profile profile.