air2 and iPad photo card reader

Similar Questions

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Xubuntu and internal SD card reader

  I use Xubuntu (Fiesty & Gutsy) on my Portege A100 for several months now, and everything seems to work fine except for my internal SD card reader and the inactive recovery. I managed to solve the problem of the recovery by turning off suspend but haven't found anything + that could help get the work card reader.

  If someone managed to solve this problem?

  In your case, there is only a problem: Toshiba does not support Linux OS and there is no driver that can make the SD card works properly. What you can do is to visit a few pages on Linux on Toshiba laptops. You might find something there.

  http://newsletter.toshiba-tro.de/main/index.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://www.Linux-laptop.NET/Toshiba.html

  Good luck!

• Pomp A100-773 and WIN 7: card reader and access keys Fn does not

  Hello
  I hope that this question did not arise 100 times before. (I have not found an answer in this forum)

  Problem:
  Card reader and FN keys do not work, where can I get drivers?

  I installed Win 7 Pro on my laptop Satellite A100-773. Everything works great and Win 7 has all the drivers installed, but the card reader and FN keys do not work.
  On the support home page is not oder pilot anything for this laptop with Win 7.

  Can someone help me with this?

  Tahnks.

  PS: it was not the version upgrade of the United Nations.

  Hi all,

  by now, I tried the extra package toshiba for model serveral for win 7 and vista, but before the installation there is an error.
  the card reader is now working with the card reader for win vista driver.

  Doesn't anyone know how to solve this problem?

• How can I stop syncing between iPhone and iPad photos

  Two questions:

  (1) someone can you please give me step by step instructions on how to STOP my iPad photos to appear on my iPhone?

  (2) is there a way to the pictures on each device, go to iCloud, without them appearing on each device?

  Thank you... as you can see... very technologically challenged!

  Your two requests are a bit against intuitive

  iCloud IS a synchronization mechanism - most of the time

  To stop synchronization - settings - Photos - MyPhotoStream - Turn Off

• iPhone and iPad photo storage

  I have recently bought a new iPad Pro and an iPhone 6s and also implemented exactly the same in terms of photos - they access the same library of Photo and both are on optimize storage device and both have the value NOT to download and keep the originals.  Two questions - they take more memory than they should be? -62 on my iPhone and 30 GB on my iPad (I know they're going to take a bunch, but that still seems a lot so we have 63 000 + photos in our library). And, secondly, question, how can be different on each device using the same settings and access to the photo library even the amount of storage they take place?

  Thank you

  Keith

  Optimized Photos stored on your iCloud iOS devices that will dynamically change library based on the amount of storage you have at any time in time. So, Yes, they could be different amounts, and they would take place as storage space they can dynamically. Here are a few items of media that can clear up your questions:

  iCloud photo library - Apple Support

  iCloud Photo Library help - Apple Support

  See you soon,.

  GB

• How can I separate my iPhone and iPad photos?

  I have an iPhone 6 and an ipad 9.3.2. Between the two, I continue to see that when I take a picture on one it also shows the other. I keep getting messages that my iCloud is almost full. I almost nothing of my choice (applications, videos, music, pictures, video) on my devices and this pop for storage continues to be. I wondered if this dubbing of the photo is originally a part of the problem? It is thought between the two purchased aircraft separated, they share the same iCloud. To me, it's wrong. When I pay all this money to my diet I should get storage consolidation.

  Also how can I turn off auto correct. I never typed sanitation. I typed "separated".

• iTunes and iPad photo

  I need to make room on my iPad and I was wondering if iTunes back up photos from my iPad so I can delete them later.

  They should be (assuming they have not been synced to the iPad from a computer), but you will need to restore this backup then access (you can't just access/restore of the backup photos).

  You should be able to copy from iPad to your computer so that you can take a backup copy of them: import pictures and videos from your iPad, iPhone or iPod touch to your computer - Apple Support

• Windows XP prevents me from installing the new hardware as my Canon camera and memory card reader.

  original title: problem with new hardware

  last week, windows xp prevented me from installing new hardware, namely a canon digital camera and a memory card reader. Although the system recognizes the material into the machine, when you are looking for auto install it asks me for the service pack 3 cd, which I did not. I never had problems, install new hardware before. Any ideas why this happens?

  Hello

  · What is the service pack installed on the computer?

  · What is the model number of the canon camera?

  · What is the exact error message that you receive with error code if any?

  If you have installed service pack 3 on the computer then you can try the method and check them off below if it helps:

  Change the registry to point to the installation of Windows XP Service Pack 3 files

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. Click Start, click Run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  c. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  d. in the right pane, right-click ServicePackSourcePath, click on edit, type % windir%\ServicePackFiles, and then click OK.

• USB not port not working and card reader doesn't work is not on my desk.

  My usb port and built-in card reader does not work on my desk, also my external speakers do not work. stakeholders work with my laptop, it is not connected via USB.

  Hi yankee7,

  · You receive an error code or error message when you connect a USB device?

  · Do you remember recent changes made to your computer before the show?

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Check the status of the device in Device Manager. Follow the steps below:

  a. click on start

  b. in the run box, type in devmgmt.msc

  c. expand USB bus controllers

  d. check if no yellow bang is listed (double-click on the device with a yellow bang for the error code)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!

• No download memory card reader

  My computer is a HP Pavilion HPE-210F model.

  I use Windows 7 Home 64-bit version.

  The computer cannot read my Xd picture card when it is inserted.

  When I go to the Manager of system properties/devices and scroll down for disk drives, listed are 4 card readers that can identify the computer working. I am using is the device USB SM/xD-Picture.

  If I right click and select Properties, it says it works Ok.  I tried to leave the computer to upgrade the driver but it says that the installed drive is fine. Ok

  Hand-held devices, he says I have 4 WPD files Volume drivers each with a scream on them and if I right click on each of these and select properties it gives me has this device cannot start code (10). I deleted all file system drivers and let the computer restore top drivers, but it does not solve the problem with the exclamtion point.

  Using either the software provided with the photo gallery live microsofts camera or use, I still can't download

  When I insert the card into the slot. A green light comes on telling me that he recognizes the card and a small icon will appear in the Task Manager, but if I go to 'My Computer' it does not show a player work as you can see, with a CD player. When I connect the camera with a USB cable it will appear in 'My Computer', such as registered and displays an image of a disc like post photos...

  Also, there are 2 USB ports alongside the locations of memory card and they work very well as I have it plugged the camera into one of the slots and the computer registerd the camera.

  The map just do not work in my player, but work in the camera?

  If it's the pins how you can staighten them, I can barely see inside the slot.

  I think its this driver WPD file system, but I do not know how to change.

  The camera is an Olympus Stylus 830 photo Xd Olympus M 2 G card.

  Any advice would be greateful.

  Portable devices like the photo card reader to be attributed to a F, G, H and I drive letter depending on the number of dwellings of readers you have in your pc. Chances are you don't publish a drive letter for drive cards and instead of this you see something like

  WPD filesystem with a driver several times exclamation point because your system can read several types of cards, but you have not issued a drive letter for the berries.

  If you open the control panel and administrative select Tools, computer, in the section storage management, clck disk management all your hardware, you should see readers for your pc. Make sure that you assign a drive letter to each card reader device, so he gets a letter.

  Restart your pc

  Next time you open Device Manager, you will see a letter for each of your devices portable drive instead of the system drive of WPD files with this exclamation point.

  Insert your memory card and it should be able to read.

  Why windows doesn'r just assign a drive letter automatically for readers of I don't know

  Worked for me...

• Card reader does not work

  HP pavilian photo card reader will not work.

  Click on the following link and run Fixit:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  If the problem persists do methods 1 and 2 under typical 10 Code error problems

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• HP laptop - 15-ba079dx: SD card reader does not work after update

  I've owned this machine for less than a week, and the SD card reader was working fine until the latest Automatic update. Now it will not register that there is a card in there. I tried several maps and none have worked while they worked on other computers. No indication of how to solve this problem?

  Hello

  Please try to download and reinstall the Realtek card reader driver for Windows 10:

  http://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75512.exe

  Kind regards.