5 - problems of Lightroom with color printing
I have 5 Lightroom and am having problems with my impressions. They look great in LR, but when I upload to different websites for the dyed prints have a gray-green cast to them and print with the troupe of grey-green. I can pull up in other applications, i.e. Windows and Facebook Photo Gallery and they look good. I checked my preferences and they are defined in sRGB. Any other ideas? For example, I got an invitation from a friend, the photos I dealt with in LR and then used Photoshop CS4 to make the invitation. The major colors printed invitation. She liked the photos, I had taken and asked those who have too much. When she printed the real images, they had a gray-green tint to them, but the invitation looked very good even if it was made on the same pictures that came out of gray-green. Any help is greatly appreciated!
You must choose sRGB in the export dialog box. The color space you chose for external editing will make no difference in this regard.
Tags: Photoshop Lightroom
Similar Questions
-
PROBLEM of ALIGNMENT with color printing
PROBLEM of ALIGNMENT with color printing. HP Officejet Pro L7680 all-in-One - using Mac OS x 10.6.8 - with USB connection & ethernet - without error message thank you.
Hello
What kind of problem? Print quality problems? You have run the alignment of the HP utility?
-
problem on copy with hp printer m127
Hello
Sorry! my English is not good
I have a printer hp m127 and I have problem on copy with this printer
When I copy an A4 of sandpaper or Charger do not print about 1 inch of the bottom of the page, but when I scan this page, it is OK and when I print the document scanned, it's too good
I don't know why this problem exists
Thank you very much
Hi @hamidjoon and welcome to the Forums of HP!
I see that you have problems with copy. I would like to help!
Before we start, I need a little info:
I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.
Mac OS X: how to find which Mac OS X Version is on my computer?
Operating system Windows am I running?
Is the Version of Windows on my computer 32-bit or 64-bit?Please let me know what you find. Thanks for posting on the HP Forums!
-
Printing problem in XP with compatible printer share
Hi, I searched for a few hours for more information on my problem, but while I can find a lot of Fusion printing problems, none is quite like mine I think.
OS = Leopard / printer is HP Officejet Pro 8000 A809 USB / VM = Windows XP SP3 / Machines virtual _ settings _ printers = enabled and corresponds to the default printer
I have not installed the printer drivers / software that came with the printer on the virtual machine.
The printer appears in printers and faxes XP. In the comment in the printer properties box, it says 'Printer created by TPAutoConnect', the location is indicated by "0;".
When I click on Print Test Page XP shows me a test page is printing. Back to OS X, the print queue of the printer indicates the following...
Status = printing
Name = Test Page
User = username
When = earlier
At the top of the window, a little less 'print 'Page of Test'." I get "printer busy (Status: 0x00002e9).
And that's what I get. No printing. To avoid confusion, the printer worked very well for OS X.
All suggestions welcome. Should I, for example, to install the drivers under XP?... my interpretation of the description of the features of merger 2.05 in this regard is that I did not.
Thanks in advance.
Setting a DAY = Just closed my VM and merger altogether, and then my printer suspended for life and printed the Test Page in Windows XP printer! Ideally, of course, I don't want to have to close to get my impression made
If the impression of Fusion is not working properly for you, then you can disable this feature and then share the printer in OS X and installing the printer in Windows in the usual manner with pointing to a shared printer.
==========
1. turn off the checkbox activated under printers in the target Virtual Machine settings.
2. turn on printer sharing in OS X and allow the target printer to share.
3. in Windows, add a new printer and add it as a network printer by using the following URL Convention.
http://Computer_Name:631/printers/Queue_Name_of_target_Printer
If you use linked by a bridge, you can also use:
http://Host_IP_Address:631/printers/Queue_Name_of_target_Printer
Or if you use NAT, you must use:
http://Host_vmnet8_IP_Address:631/printers/Queue_Name_of_target_Printer
Examples:
The shared network printer is a HP LaserJet 4050N printer on my MacBook Pro, and the following information is relevant to this.
ComputerName = MacBookPro
Host_vmnet8_IP_Address = 192.168.51.1
Queue_Name_of_target_Printer = HP_LaserJet_4050
So, either of the following examples work in my Windows XP Virtual Machine.
http://MacBookPro:631/printers/HP_LaserJet_4050 http://192.168.51.1:631/printers/HP_LaserJet_4050
-
Problem of fillup with colored rectangles
Here is my canvas
< mx:Canvas id = "b1" x = "10" y = "10" height = "40" width = "300" borderStyle = "solid" borderColor = "black" / >
To fill the canvas with rectangles, I wrote the following code
for (var i: int = b1.x; i < b1.x + b1.width; i = i + 15)
{
var line1:UIComponent = new UIComponent();
var lineThickness1:Number = 1;
var lineColor1:Number = 0 x 000000;
var lineAlpha1:Number = 1;
LINE1. Graphics.LineStyle (lineThickness1, lineColor1, lineAlpha1);
LINE1. Graphics.MoveTo (i, B1.y);
LINE1. Graphics.drawRect(i,B1.y,15,B1.) Height);
this.addChild (line1);
}amount of the fine can
< mx:HBox = "40" x y = "450" >
< mx:Label text = "" enter units: "fontWeight ="bold"fontSize ="15"/ >"
< mx:TextInput id = "tiUnits" width = "30" maxChars = "1" / >
< mx:Button id = "btn" label = "OK" click = "btnCall (tiUnits.text); "/ >
< / mx:HBox >In btnCall()
entry entry in tiUnits should be converted to integer, and taking into account this value, I need to fill the canvas with color rectangles(width-15)
for example: If an entry is 15 the first rectangle must fill with color and if I come back in 30 then after first two rectangle rectangles each width 15 must fill
in this way I have fill the canvas one after the other
Please help me...
Hope that this code solves your problem
private var lastPos: int = 0; private function drawRectangle(event: MouseEvent): void { var unit: int = (Number(tiUnits.text) / 15); var colors: Array = [0x0000FF, 0x00FF00, 0xFF0000, 0xFF00FF, 0x00FFFF, 0xFFFF00] for(var i: int = 0; i < unit ; i++) { var lineThickness1: Number = 1; var lineColor1: Number = 0x000000; var lineAlpha1: Number = 1; var bgColor: uint = colors[Math.floor(Math.random() * colors.length)]; var line1: UIComponent = new UIComponent(); line1.graphics.lineStyle(lineThickness1, lineColor1, lineAlpha1); line1.graphics.beginFill(bgColor, 1.0); line1.graphics.moveTo(((lastPos + i) * 15), b1.y); line1.graphics.drawRect(((lastPos + i) * 15) - 1, -1, 15, b1.height - 1); b1.addChild(line1); } lastPos = lastPos + unit; }
-
Problem attaching Lightroom with El Capitan
Who is responsible for fixing Lightroom attach the problem with the camera Nikon on Mac? Adobe, Nikon or Apple OS?
Ray946 wrote: who is responsible for fixing Lightroom attach the problem with the camera Nikon on Mac? Adobe, Nikon or Apple OS?
.....................................................
The simple answer is that Apple has caused the problem by changing something in the latest version of their operating system stopped tie working in LR. Which means that the Nikon (and other manufacturers of cameras?) had to rewrite their SDKs for each camera, so that they would work with the operating system has changed. Then Adobe could take all the SDKS updated and use them to make tethering work in LR. That all takes time and tests to make sure that the SDK Update causes problems elsewhere.
Solution? Do not update your operating system until you have discovered that your programs, printers, etc. work correctly with the updated operating system. This applies to Windows users and Mac users. Although Windows 10 is out for months, most windows users still use older versions they work with their programs and materials. Programs, printers, video cards, etc., all need to be updated to work with Win 10 and from Apple and Microsoft constantly change their SES, it is an endless work to deal with these updates.
Bob Frost
-
Problem with alert printer after you set up eprint
I've just set up my HP eprint/connected to my printer HP Officejet 6700 account. I went through all the instructions and generated a code for me to record my printer. My printer came but I noticed that I have 2 alerts next to the printer which has been recorded. The alerts are:
- Online
- Problem with printer
When I click on the message of the latter I get the following message
- An unspecified problem was reported. Please check your printer.
See the front panel of the printer for more information on the resolution of this condition
I checked the printer, but it is not showing problems. I have however deleted the re-recorded new printer and web service. This time he seems to have solved the problem, but when I went back to the account later in the day the alert reappears.
Could anyone help in this case.
Hi BillyBoy59,
Welcome to the HP Support forums. I understand that you are getting a message "Problem with the printer" in connected HP.
Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error. If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.
-
Problem with my printer - printer spooler does not
Printer Spooler not working do not, said no installed printer, doesn't let me install again running with windows Xp. I can do no problem before working with this printer for 10 months with no problems, is there a solution.
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Use of the special procedure for printers Lexmark described below and follow in its first Article. If still no joy, use the alternative method that is linked below.
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article.
A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window and press enter
dependent on the spooler of sc config = RPCSS
outputNote that there is no space before the =
If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.
Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
-
Connected HP - 'problem with the printer '.
Having not used the 'Apps' on my HP Photosmart 7520e for awhile I discovered that my printer is recognized on logging in HP ePrint, as "one line", but here's a yellow Triangle telling me 'problem with printer.
My printer functions ok but if I try to use an application (I tried to print the calendar), I get the message "unable to connect to web services. "Cool Internet access and try again.
I tested the printer by sending a test print of my Tablet and that works fine but Apps simply do not seem to recognize a web connection.
Quite simply... Out there!Hi OnnaBugeisha,
Thank you for being a member of the community of HP support. I understand that you are unable to get the applications to connect from the front panel of the printer and you get a message "Problem with the printer" in connected HP.
Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error. If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.
Regarding applications is not enabled on the front panel of the printer, HP is aware of the problem and working on a solution. It is recommended that you have your updates of product set to automatic on the front of the printer in order to receive the update as soon as it is available. If you wish to discuss with a phone support agent, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click the link below to find technical support for your country/region number.
-
Printer Dell 5130cdn - streaking on color prints
Printing black and white works very well. With color prints I get several streaks running through the entire page. Two streaks are purple and about 1/8 inch in width. There are at least 10 streaks orange 1/16th of an inch or less wide extending across the entire page. The location of the streaks doesn't seem to change much between the impressions. I recently replaced the cartridge toner and drums with new parts from Dell.
The troubleshooting guide suggests opening a program in the tool box and running graphic printed. I have not been able to find how to start the program from the Toolbox.
So where should I go from here?
Thank you
Rich
I ended up getting the solution to my problem of Dell warranty service. I didn't know that I had this earlier.
Inside the front door of the printer, you can find a cleaning tool blue plastic with what looks like a pad of velcro on the end of it. The inside of the door on the front of the printer, under each of the four drums, you'll see a gap of about an inch wide with a blue border around it. Insert the cleaning tool into one of the slots until it stops and then remove it. You should feel a clicking against the cleaning tool when you do this. Repeat 10 to 15 times for each of the four slots. For me, that did the trick. I thought for sure it was the fuser unit, but could not understand way that it did not affect printing in black. Now, I know, I thought wrong.
Were instructions to do this, that I could find in any case nowhere in the online help or the manual of the printer in the troubleshooting section.
Replacement cleaning pads come replacement toner cartridges that Dell sells. Hope your problem is as simple as mine. Good luck.
-
Weird problem with incorrect color printing
Hello
IM facing a weird problem in software hp deskjet 1050.my printer printer all-in-one j410 has 5 modes i.e. normal quality printing, fast draft, simple better paper, Photo paper mode quality best quality & specialty paper better quality.
When I put take-away color printed a photo in "quality mode best photo paper or specialty paper best quality mode ' on any type of paper, the output is pinkish or bluish.
Please note im using black and non-rempli, true hp original cartridge 802 tricolor.
to make things clear, im attaching a scanned photo of my printed paper that have the same images with original print quality modes.
as you can see in the scanned picture, that we have the fast draft quality to the best quality of photo paper, the blueishness rose.
Pls help me :-(
-----------------------------------------
My Info
OS: windows 8 pro
Printers: Hp deskjet 1050 j410
Hello
This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.
http://support.HP.com/us-en/document/c04190374
Good luck!
-
When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed. I tried to shake the black toner, but nothing has changed... Should I replace the black toner?
Hey @candreas,
Welcome to the Forums of HP Support!
I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.
If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.
Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
Printing with color HP LaserJet 2840 PCL6 printer problem
I installed the printer on another computer. When I try to print, every time I need to reset the printer before it prints a document that is made by the new installed MS Office 2010. What to do to be able to print at a time?
This looks like a problem with the printer itself. Have you checked for firmware later?
-
small problem with the printer dialog box
I recently added a Brother printer to my IMac and ran into a minor problem. When I put in place using my WiFi and AirPrint, the dialog box has a convenient box for the black and white that I was able to check in one easy-to-replace step and just print in color. However, the alarm time and the answer is a bit slow. So, I then plugged a cable and add this version of the printer. Now the box is missing and nothing I've been able to do, to delete and add new printer allowed me to bring that? Any ideas on how I can get this feature practice appears in the dialog box with the printer connected to the cable? Thank you.
If I understand correctly, you have now two entries separated for this printer to Print & Scan? It's OK, although AirPrint is better for various reasons.
I understand the printer takes an unacceptable amount of time to wake up to when choosing the AirPrint printer, and you want to avoid this.
If you have added a separate entrance - one for the USB printer connected - how who you? Did you leave the print & Scan install this printer automatically on its own, or did you download and install a driver of brother separately?
-
ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP
I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY. ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE. THE OPERATING SYSTEM IS WINDOWS 7.
Mahamoud,
Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
Here is the solution I found to this problem:
I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
Replacement of the restored cartridge the printer functionality.
That's the good news.
Now the bad news: for HP.
The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?(I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.
Maybe you are looking for
-
Settings >; general >; keyboard >; shortcuts toggle?
I am running iOS 10.0.2 on my Plus 7 iPhone and my iPad 12,9 Pro. When I go into settings > general > keyboard IPAD Pro, there is a "Shortcuts" under the rocker switch to "Enable Caps Lock" and above the toggle to "Predictive". (Note that the rocker
-
The black screen a dialog box empty with "Authorization required" as its header.Using Windows 7 machine.Can't follow your troubleshooting routine as I can't open Firefox at all!
-
n c: Windows there are a lot of files like KB950762.log. What are these for, and it is safe to get rid of them?
-
How to separate related windows on the taskbar in Windows 7
Hello I've upgraded from Vista to Windows 7 and were able to customize the taskbar so that it works quite the same as Vista. However, I have trouble finding a way to change "windows" of being grouped as opposed to appearing in the order that I opened
-
pls help