ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

Similar Questions

• Error message 6700 - problem with the printer or ink

  
  

  There is a document with steps to help solve this type of printing errors.  Click here to access the troubleshooting document.

  If you have done all the troubleshooting steps, and the error is still present, the printer has developed an internal material condition.  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

• HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

  HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

  Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

  Sometimes spits out a blank sheet of paper.

  Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please post back to let us know how you go?

  Thanks, Ciara

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• OfficeJet 8600: HP OfficeJet 8600 'problem with the printer or ink system '.

  We have replaced the cartridges (with HP) and now we can print only about 1/2 a page, sometimes 1 page-, then it displays an error, "There is a problem with the printer or the ink system" and the printer should be set and to continue...

  We bought new (2nd series) of the ink cartridges and the same behavior exists.

  It seems to point to a new print head - but those who are more expensive than a new printer.

  Are there other measures I could take to try to resovle?

  I can't find scraps of paper (ie: torn, jam, etc.), nor any excessive ink any where - everything seems pretty clean.

  I removed the print head and cleaned the contacts.  I cleaned the contacts on the ink cartridges. I ran "Clean print head" in the Tools menu (which results in the same error)

  

  There are sometimes up to 3 of these messages "stacked."

  It is died regardless of what was asked of it... ie: print from netowrk, printing via usb, copy color, copy b & w, etc..

  Hello @jassing,

  Thanks for posting in the Forum from HP Support.

  I understand that you are experiencing a recurring error state in your HP Officejet Pro 8600 e-all-in-one printer.  I want to help you with this.  While it is clear that you have tried most of the recommended troubleshooting steps, I have some additional suggestions that might help.

  HP article presents common troubleshooting steps in order.  You can give these another shot before trying the more intensive step that I have in mind.

  If you have tried all of the above and your problem persists, click here to check the status of your printer warranty.  If your printer is currently under warranty, please call our technical support in 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If your printer is NOT IN WARRANTY, try the following:

  Get ready to clean the print head

• "Failure of the printer: there is a problem with the printer or ink system" message

  I get printer error message on my printer Officejet 6700 Premium.  I'm on a Mac OSX 10.9.2.

  I have reset the printer and I tried to update the firmware by the instructions, but he tells me that the device is busy and won't.  The printer is out of warranty but was hardly used - less than 200 printed pages - UGH!

  What can I do else?

  Hi Embie2014,

  Thanks for letting me know you are using the HP cartridges No.

  HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridge not HP, or filled HP cartridges. If you use genuine HP, the following cartridges no could not solve your problem of print quality.

  A "cartridge problem," "ink cartridge failure," or "Incompatible cartridge" Error Message appears on the all-in-one.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document explains how to clean the print head.

  Thank you.

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• Failure in the printer or ink systems

  What can I check after checking the unit ink and printhead on my printer IPSR 8600?  Get the error message 'problem with the printer or ink systems' have checdked ink cart. and print head.  All seem good.  Where should I go from here?

  Hello

  You have followed the steps in the link below.

  http://support.HP.com/us-en/document/c03096304

• HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink

  HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works

  OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now

• error message 'there is a problem with the printer turn the printer off even more'

  I have a new 7525 HP photosmart HP printer, if it can find all the flashing lights with an error message on the screen "is there a problem with the printer. Turn the printer off on new"this does not solve the problem... Can't clear this error message!  Cannot use this printer!

  Hi sandrafranks,

  Thank you for your answer!

  In my view, it is unwanted material. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps and have a great day!

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.