5-way navigation key

Similar Questions

• Use the space key to switch in the navigation key

  I want to use the SPACEBAR as a start stop button in my application. It is not listed under navigation key is there a way to do it by programming?

  You can use a structure of the event to a key event down to the VI.  Compare the Keydown with the space character, and act accordingly.

• navigation key automatic tab at the front panel

  I'm designing a page of user authentication where there are two controls of the channel and 3 Boolean controls. At runtime, I give input the control to a string, then by a tab, go to the control following the string. Then if I press TAB it's going to one of the Boolean control. But I want to choose a particular boolean after giving the string to the second chain of control and when I press on enter, that particular boolean will be on. I tried to do something in the navigation 'key' in 'Properties' of the Boolean control. But there is no option. Please, help me to do it.

  Thanks to aeastet and Anand P both. I solved my problem with the help of suggestions that both of you have given. Thank you very much for helping me.

• navigation keys began to skip 2 or 3 lines instead of only 1

  Key problem of navigation.

  The top and bottom navigation keys began to skip 2 or 3 lines instead of only 1, on my Vista and XP computers. Is it possible to adjust these settings?

  Hi Richdag,

  1. do you use same keyboard for two operating systems?

  2 have you made changes to your computer recently?

  3 are you facing this problem with a particular application?

  I suggest you to follow the steps and check if it helps.

  Method 1: Clean the keyboard and check.

  Method 2: Connect another keyboard and see if it helps.

• Determine if a Navigation key will change the current priority of the screen

  Hi, I was wondering if there is anyway to determine if a navigation key press on will change development screen to another field or not?

  Thanks in advance.

  Well, also, the field has an isFocusmethod that returns true if a field has the focus. I think that you can combine with getFieldWithFocus() to get what you want...

• navigation keys strange behavior under sqlplus

  In sqlplus when I click on the navigation keys in order to get (up, down) historical data or move in the current channel (left, right),
  I get strange character combinations instead.
  
  Example:
  pressing < upward > key will display: ^ [[has
  pressing <>key will display: ^ [[B
  pressing < right > key will display: ^ [[C
  < left > pressing the key will display: ^ [[D
  
  This behavior does not occur when you press these keys in the Linux prompt system $.
  Here, I get the statements very well history buffer and go left and right well.
  
  I use Oracle Linux 5.7 with Oracle Database 11 g 2.

  Hello

  Search the package rlwrap and then use rlwrap sqlplus imstead of sqlplus.

  Best regards
  Thomas

• Quick navigation keys

  Hello, I am creating an application and I want to know how I can activate the fast navigation on my application keys. I looked in the manuals of BB, and I found nothing, thanks in advance

  Thank you!

• Two-way Navigation: side AND Top Navigation: Page header contained in the Global Page causes overlap of the following regions

  Environment:

  -------------------

  APEX 5.0.1 on ADR in Tomcat

  Universal theme

  Global page

  New application (no migration)

  The goal:

  -----------

  In addition to the navigation, I want to use a horizontal Navigation at the top of all application pages at the same time.

  My way up to now:

  ---------------------

  (1) left Navigation ist defined as default user interface.

  1A) Unfortunately it is not possible to have two means of navigation defined at the same time!

  (2) therefore... I created a global page

  (3) and added a list with the list of attribute (= Menu bar) template to the PAGE of a global Page header. -> Well, looks good, but:

  The problem and the Question:

  ------------------------------------

  When adding a list according to menu (or something else like static text) to the global header of the page then the left hand side Navigation AND Breadcrumb area is oberlapped by the 'Logo' and 'Navigation Bar area' because the Page header is pushing it down. Parts of the side Navigation and navigation bar are not more.

  Please see the 2 following screen captures:

  Initial position:

  

  After the addition of menu on the global page:

  

  Unfortunately I can't understand myself, how to set the position or the css page template, or values... and at what level (model, page,...) I have to put.

  = > y at - it a way to let these following regions (dynamically) be pushed down? How can we define the position?

  Best regards

  Joerg

  Hello out there!

  In case anyone has the same issue here the answer I would give for-> me I found the following solution:

  .) I defined a new style with the following custom css theme roller:

  .apex-side-nav .t-body-nav, nav-side-.apex .t-body-stocks, .apex-side-nav .t-body-title

  {

  top: 80px;

  }

  

  .) And then of course saved as a new style.

  Hope this is the right way and good / best practices to deal with it!

  Best regards!

  Joerg

• Is it possible to hide the navigation keys?

  Hi, anyone know if you can move house, the back and the recent buttons down off the screen? I saw this option on the Oneplus One as a controls - device - which is also on the version of lollipop. I find this most boring layout on the E6683 Z5 because it hinders most applications and reduces the avaiable real space on the screen. A big thank you Colin.

  If the application permits, the buttons will disappear. It is called immersive mode.

  https://talk.sonymobile.com/T5/software-updates/header-bar/m-p/1020618#M24869

  https://talk.sonymobile.com/T5/Xperia-Z2/transparent-or-semi-transparent-navigation-bar-all-apps-in/...

• Any way of keys in registry list in order of the date of change/addition?

  I'm having a problem with a program I installed. I can't find the registry key for the program manually. Is it possible to find registry keys by update? or get their update list?

  Sorry, but this cannot be done.  There are 3rd party programs that will do it, but I'm not aware of anything (but you can search www.download.com,www.tucows.com, Bing and Google).  In fact, in the views of the registry, I just noted that it does not yet reveal the date something has been added or changed.  I'm not even sure that it retains this information (which would make a search on the basis of impossible).

  You just need to find and capture the right information (the name of the program, the name of the main executable file and likely other options) to see if you can find what you are looking for.  You could also contact the manufacturer of the program and see if they can tell you where to find this information.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Image navigation key button

  I have what should be a relatively simple interactive animation for a html5 canvas. I have 4 distinct buttons, B1, B2, B3, B4, which must navigate to and stop at different times. For simplicity, B1 is the frame 1, B2 is the frame 2 and so on. The closest ive got to place me a this.stop (); in the framework to keep executives play. After that, I assigned a snippet for goToAndStop(); for each button.

  The problem is that during the initialization of the animation, only the work of buttons only once. as all the functionality stops.

  It is my first post of discussion, so if I did not describe the problem pretty well please let me know.

  your buttons probably fail to exist (for, at least, some time) after a click on a button and feature stops.

  to remedy this, do not remove your buttons in the ide (for example, by having a blank Keyframe on the layer containing your buttons.  Use addChild and removeChild to add and delete buttons when and where you want.

• By pressing the ENTER key once instead of twice

  Hello!

  I am developing a Login System. I want the user to choose a user name (from the list), and then enter a password (in a text box with "the password display" enabled). I want the user to be able to press ENTER, optionally with a click on the Login button after entering the password.

  I'm doing it with a Structure to the event read the key Down event and using the node Vcle to record key is pressed. (see image below)

  My problem is that the user must press the Enter key twice to something happened. I want that happens on the first click.

  Anyone has any advice?

  Hey PeterPoPS,

  If you right click on the button enter and go to Properties > Navigation key, you can select the toggle property to bind to the key back from there. You can implement the correct mechanical action so that the button is not fixed in this State, such as lock to exit. You can change the action type mechanical button responds with by right-clicking on the control of entry button and navigate through the menu of mechanical Action . If you later want to use this button within a structure of the event, be careful because the mechanical action of locking must be explicitly read and reset through the event.

  This way you can build an event around the change in value of enter key.

  I hope this helps!

  Kind regards

• Assign keys in labview 8.5

  I need to assign a value to a Boolean switch key in LabVIEW 8.5. I found the sub menu of navigation key, but don't want to use the keys listed. Can I assign any key on the keyboard and if so, how?

  Hello Millz,

  There are at least two ways to handle this, but my favorite is to use a structure of the event.  Set up an event for "VI this"-> "Button Up" (or "Key Down" according to your preference).  On the left node of the structure of event, find an integer called "Scan Code."  You have to experiment to understand what code analysis corresponds to the key you want to look for.  Each key has its own unique analysis code.  Then, you can configure the event to run the code that handles the Boolean value.

  I have attached some screenshots so you can see what I mean.

  I hope this helps...

  Jim

• In the new version of Firefox 29.0.1 removed the ability to move the right side navigation buttons. Restored version of Firefox 28.

  I always work hard and with Firefox. My customization assuming that it is transferred always organize buttons back and forward in the navigation bar on the right side which was convenient for a quick job. In the new version of Firefox 29.0.1 deleted the possibility of moving the navigation on the right side buttons... Firefox is not flexible enough for the user. Really sorry. Restored version of Firefox 28. More frequent to not remove the flexible adjustment of the navigation keys. Thank you.

  28 Firefox has security flaws. It is not safe to use.

  • https://www.Mozilla.org/security/known-vulnerabilities/Firefox.html

  You can move the navigation buttons in Firefox 29 if you install an add-on.

  1. Classic restaurateur theme installation and restart Firefox when prompted.
  2. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  3. Beside the classical restaurant theme, click on the Options button.
  4. On the main tab, make sure 'Mobile back-forward button' is checked. Close the options window when finished.
  5. Right-click on a zone empty of the tab bar and select Customize.
  6. Drag the previous/next buttons wherever you want.
  7. Click the Customize the output at the bottom right button when finished.
  • How to make the new look of Firefox as the old Firefox

• Shortcut keys do not work on my Satellite L550D - 136 (PSLXSE)

  Hello

  I have a Toshiba Satellite L550D - 136 PSLXSE

  I wanted to work with the keys Fn + f (f1 etc.) numbers

  But they do not work. I've already updated my Windown and I already updated the package of service evaluated.

  What can I do, they work?

  By the way: the keys have no mechanical defects.

  Thank you

  Hello guys

  I put t really know what you are doing with your laptops. Each new laptop comes with the pre-installed operating system clean (recovery image) and FN (Flash cards) keys SHOULD work correctly.
  Later, when you install your own stuff or configure OS, something can go wrong, and cards flash may stop working. On this virtual path, it is not easy to say what may be the problem.

  Of course, you can try to fix this resettlement package added. This software contains cards Flash utility and it should work again. Before install VAP remove preinstalled version and restart your laptop.
  I put t know which type of installation of Windows you have installed, but anything is possible may be responsible for the non working flash cards.

  In the end, if you will not be able to fix it, to save all your data and install recovery disk HARD recovery plant using image - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Wth all factory settings will be OK again.