navigation key automatic tab at the front panel

Similar Questions

• Is it possible to call a .exe (non-LabVIEW, such as Notepad) in a child windown on the front panel?

  I would like to launch a stand-alone .exe inside the front of my VI.  It is a piece of software by the provider of a sensor that I try to incorporate in my VI.  I was able to find how to call the .exe using the .NET constructor and invoke nodes.  However, the application opens in its own window.  Is there a way to run from a child window within the façade (ideally, within a tab on the front panel control)?

  I'm in LabVIEW 8.6.

  Thank you.

  smercurio_fc wrote:
  I don't think that it actually works. My understanding is limited about this feature, but since I read it only works with the pop-up windows and windows that are already children. The application's main window is not a child window.

  I've done it before.  I have attached a simple example using Notepad.  Make sure that the notebook is already open no open files.  Since the example is not the position of the child window, the position relative to the window will be the same, because it is off the desk.  So, make sure the upper left corner of the Notepad is close to the origin of the desktop computer.

• I can't get the automatic updates to enable secutiy tab in the control panel.

  I can't get the automatic updates to enable secutiy tab in the control panel. There are propmts me to light them mannualy in systems that they tab already, but they do not always allow me to turn on the automatic updates on the Security tab. I don't see the yellow shield appearing at the bottom RHS of the screen more updated?  someone know why?

  YAY. I got it fixed. I had to reinstall the automatic updates service and everything works. All updates now came through windows and the Security Center has all the lights GREEN.

• Only the front panel cursor hand

  On the front panel, I see only the hand cursor.  I can place objects but not change or move.  On the block diagram, I can place objects, but not wire or move objects.  The VI is not running.  I'm using LabView 6.1.

  You realize, not you, that you have to manually select the tool with 6.1? Can you show the tool palette to select from? You can click on the tab key to cycle through tools?

• How to scroll through the front panel when running

  Hello

  I'm using LabVIEW 8.5. I want to scroll the front panel automatically according to the moving object. I enclose a vi for example, in which I move the image, but if it is out of range of screen I have to scroll manually horizontal scroll bar to see the position of the image, it is possible that it automatically scrolls according to my position of the object.

  -Thanks in advance

  Hi, Mary,

  Well, now I see what you wanted. From my point of view using front panel scrolling for this animation is wrong way (if not I do not know your final objectives).

  I would recommend that you use the image for this control. Here the work by hand a little more, but you will get better results and will not scroll to your façade.

  For example, "quick and dirty" implemented:

  

  Andrey.

• A way to group controls and indicators on the Front Panel and that they can be made Visible or not as a group?

  I would like to combine several orders and LEDs on the front panel in a group in a way that allows me to do the whole group Visible or not.

  I tried to use a Cluster, but it has a side effect that all elements must be inside the controls or indicators, but not mixed.

  Is there any graphic element, like a panel that can contain other controls and indicators on the inside and make them Visible or not as a group regardless of whether they are commands or the LEDs?

  Good suggestions on how to do this?

  Thank you.

  The tab control is still not my favorite, appearance but it's a way fast and effective to show and hide groups of controls and indicators.

• Effectively save the front panel settings

  Hello.  Just a quick question: is there a way to effectively interrogate all the settings on the front panel and save them in a file to be loaded later?  I know that this is possible by making the keys for each, but my front panel has a huge 38 parameters that need to be saved.  Using the methods I found online and elsewhere in this forum, save a large number of parameters is possible, but would be very tedious.  I was wondering if there was a more efficient way, as a command to mark all present controls and group them into an easy to manipulate the cluster.

  LV 9 versions

• A button on the front panel reset

  I use a record button on the front panel, in the mode "change when you press on. I have run the VI, then press the record button. After having intercepted the VI, the button lights. How do the button return automatically to the OFF state during execution of the VI next time?

  Set the property to "False" node, it will reset.

• How to center an image in the tab on the front control in LabVIEW 10 (Mac Version)?

  Hello

  I would like to center an image on the front panel. The image is on a tab control that is suitable to the pane. I can't find a way. I work with LabVIEW 10 on Mac. Any suggestions would be very much appreciated.

  Thank you

  Michelle

  You will need to do a bit of math.  Download the locations of the edges of the tab control and image control.  The centers are unlike most high or left half.  I'm not sure without checking, but I think that the values are with respect to the angle of the screen.  Be careful about the origin if you have several displays.  If the differences are odd, you have an error of half of the pixels.  From the positions of the centers, you work towards the positions of the top and left edges.  It may take a few tries.  The rectangle Bounds includes the label (I think), so keep that in mind also.

  Lynn

• How to get rid of the reference lines on the front panel

  I forgot how I created a couple of horizontal and vertical lines on the front panel. It seems that the original on the front lines. When I move my program to another monitor with a different resolution, the layout is messed up because of the reference lines cannot change the resolution. Everybody respected this before? How to get rid of them?

  Attached are the 2 creen shot of facades.

  Thanks in advance.

  Ah, I figured out. I accidentally selected the "scale with objects pane" from the context menu of a button in the tab. This is whence the reference lines.

  Thanks for all your guys help and advice.

• Is it possible to use a box Structure to hide digital indicators on the front panel, when they are not in use?

  I'm rather new to LabVIEW, only used for about 1.5 weeks from this post, it means that I may be missing something pretty obvious due to ignorance, but is it possible to make my front to change as my changes of breakage due to the selection of the user to a certain case via the front panel?

  The goal of the program is to make a simple layout for a user who uses the digital multimeter that the proposed code is designed for and I don't want tons of digital controllers and such clutter the screen that do not work with the function of the user uses to measure with.

  Thanks in advance.

  Yes.

  Two ways: 1. use a tab control.

  2. use of property nodes (Visible property).

  The tab control is a bit easier on the block diagram, but if some controls should appear in many cases it is difficult to do.  Property nodes take more space on the diagram but allows you the versatility to do almost everything you want.

  Read the help files and look at a few examples.

  Lynn

• Binding the controls on the front panel programmatically

  It seems that Programmatic binding the controls on the front panel do not work when they are located in a tab control.

  Is this a known problem in LV 8.6?

  If the control of the façade is already bound to a URL of PSP you can link to another URL using DataSocket URL property during execution of the VI.

  

  If the front panel control is not bound to a URL of PSP, then you cannot attach it to the URL of the PSP when the VI is on. You can use the method AttachDataSocket of VI to change the link while the original VI is stopped (in edit mode).

  

• HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

  Hello

  I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

  could be - sleeve, ring and end cap (mono audio and microphone)

  or

  could be - sleeve, ring, ring and tip (stereo sound and microphone)

  Having read through the manuals and nothing is said on the type to use.

  Hello world

  Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

  Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

  Everything explained by the practice - but not the paperwork in the manuals.

  #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

  Thank you

  Son

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• Presentation of connector to the front panel DC7700

  Hello

  Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

  Any advice welcome.

  Peter

  FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

  And thank you "mdscole" to highlight the trail.

  ;~) !!