5510 all-in-one - could not load of new hardware found

Similar Questions

• HP PSC 1210 all-in-one: could not open the HP Director icon to the desktop

  I installed the CD software for this fairly old printer on my laptop Windows 10 (64-bit). Everything seems to work fine except that I can't access the HP Director. I tried to check on the resources from HP site, but it does detect not all HP products on my laptop even if the printer is plugged in and on. Also, I searched for the car and the road status update on the site of HP tools. Even if I see my printer listed on the player page, it has no download button click next to my model. I was trying to see if the drive indeed download when I installed the software.  Again I don't know even though most everything works except for no access to the HP Director. I guess that the fundamental question is whether or not this now old enough (but still very good printer) can run on Windows 10. I used it before on XP. I'd appreciate any help with any of these issues. Thanks, Peggy

  Hello

  HP Director is not intended for Windows 10.

  The original CD was made several years earlier version 10 of Windows.

  Right click on the start icon and select programs and features, and then delete any software installed client the HP of your printer.

  Install the software by following the steps below:

  http://support.HP.com/us-en/product/HP-PSC-1200-all-in-one-printer-series/90763/model/90765/document/c01796879/

  Be aware that no full functionality is available for Windows 10 since it is an older model, scan and pritn base drivers are provided by the operating system itself.

  See "I have always used the HP and the HP Toolbox Solution Center. What I use now? "in the document for more information.

  Shlomi

• HP Photosmart C5280 All-in-one: HP Photosmart C5280 All in one will not wotk on new install

  I bought an HP Photosmart C5280 All in One several previously used and used with a dell dimension running windows xp woitout problems.  .  I rcently purchased a dell Windows 7 Professional or with a processor 15.  I reinstalled everything and get test of allignment of cartridges, and it keeps failing.  I did the partial reset and semi.  It wil not scan or copy.  Help, please.

  Hello @mgsindy,

  Thanks for getting back to me on this subject. I am pleased to hear that the issue of alignment has been resolved. However, because you get the message when copying or scanning that has occurred a "failure" and you screen gets stuck on 'Cancel' for the copy, you experience a hardware failure with your copy/scan inside your printer mechanism.

  Because the programming of your printer control the scanning/copying mechanism, I checked in an update of Firmware for your product to see if there was an update available in the corrupt case programming was causing your issue. Unfortunately, due to the age of your product, it is not these updates.

  You also mentioned that you did a semi Full reset programming on your printer, nothing helps.

  At this point, I will provide you the failure of scan standard troubleshooting steps to see if there is a chance to solve this problem.

  Step 1: Power Reset:

  1. With the printer, unplug the cable from power for 30 seconds
  2. After that 30 seconds reconnect the power cable from back in
  3. The printer should return its own
  4. Once the printer returns to the ready state, again test the copy feature.

  Step 2: Verification of power:

  Power strips and surge protectors can cause HP printers do not work properly because they can run out of power. To ensure that a power problem is not causing your Scanner failure, please plug the unit directly into the wall outlet.

  Once your printer is directly to a wall jack please test again the copy function. If the problem persists, please continue to the next step.

  Step 3: Check the Scanner Bar and light:

  1. Feed your printer
  2. Lift the lid flat on your printer and click the copy button
  3. Check if the scanner bar is moving or if the scanner lamp turns on.

  Source: A "Failure of scan" Message appears on the all-in-one control panel and you can not scan, copy, or fax

  If there is no response from the mechanism of scanning, the last step would be the printer to service.

  At this point, if the problem persists I suggest you contact the Technical Support queue by phone to explore additional options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if the steps I have provided resolve your copy/scan failure. Good luck!

• 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

  Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

  I have a 8610 who worked during the first weeks perfectly under windows 8.1.

  After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

  Hate to say it, but I think we're out of luck until HP fixed their software.

  Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

• Could not load the new program.

  I'm invited to "another installation is in progress", but nothing is underway.  I tried to restart, cleaning hard drive; VIsta updates are up to date and I keep getting the prompt, so cannot load program tile "Spanish Immersion.

  You can give up Vista and Win7 to load if you want, but the cause of your problem is / was of third party software, not the operating system. There are many other things you can do as described here: http://support.microsoft.com/default.aspx/kb/555175 Best of Luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Could not load the new lun

  Hi all

  I have the followin question

  has been sucssefully mount new lun to ESX4 without problem and then unmap the lun of the console storage without ESx first after this rescan storage race apart, the lun to disappear after that when I try to mount this lun or any logical unit number I got the following error 'HostDatastoreSystem.QueryVmfsDatastoreCreateOptions' to object 'datastoreSystem-156"on vCenter Server failed.

  Thank you.

  Please read http://kb.vmware.com/kb/3371739

  André

• Windows could not search for new updates found error code 80070570

  tried; Troubleshooting problems with installing updates. Click to open windows update and I got the same code.clicked of error on measures of troubleshotting but cannot solve the problem, what do I do next? said I should come here for help. can anyone help please. updates have been installed modified 17/01/09

  Hello Ferness1953,

  Thank you for posting.  When I studied your question and the error code.  I found this article and the steps to solve what he listed in the link below.

  http://support.Microsoft.com/kb/942365

  Please, try the steps listed in the link and let me know if it helps.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet 5510 all-in-one: scan multiple pages into 1 file/scanjob with my HP Officejet 5510 all-in-one

  Is it possible to scan a page one / several pages in a single file scanjob/one on the flat of my HP Officejet 5510 printer all-in-one?

  I did do some additional research on the internet and found the HP scan and capture the app. Although my HP Officejet 5510 all-in-one did not appear in the list of devices, I installed the app, and it has provided a solution for my problem: scanning multiple pages in a job file. Banhien suggested to click on the + sign, but the drivers, I had do not have one, but the HP scan and capture app has this feature. It's so nice. My problem is solved.

• Could not load the Norton power Eraser

  Installed Norton Security. Everything works well except a pop up window that says error 5013,3.

  Following the instructions I downloaded Norton Power Eraser. When you are finished, the pop-up with the addon window said I need a newer version of Power Eraser and "click here".

  No mater how many times I try, could not load the new version.

  Don't know what I was doing wrong before, but when the pop-up window came this time it worked.

  I'm glad that it worked, but I wish I knew why.

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Could not load file or Assembly sorttbls.nlp or one of its dependencies

  I always get this error message... is the cause of my computer and not to connect or to load a web page like www.msn.ca on the browser?  Could not load file or assembly sorttbls.nlp or one of its dependencies - it is displayed every time that I have restore to an earlier point to my web page. What is the cause? Help, please.

  Hi Jaime,

  1. what version of web browser is installed on the computer?

  2. the specific problem of www.msn.ca? is

  3. the problem occurs on other web browsers?

  I want to tell you that this problem can be caused by a corrupt Microsoft .NET Framework.

  Follow these steps and check if that helps:

  Go to add/remove programs and select the "Edit" button for Microsoft .NET Framework 2.0 Service Pack 1 (and Microsoft .NET Framework 3.0 Service Pack 1).

  If the framework could not be repaired or uninstalled and then follow the link and follow the steps in the article:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I can't reinstall firefox, I get the error 'Could not load profile' and not a solution I found works. / Appdata/roaming/mozilla folder is not accessible.

  I'm on Win7 64 bit. Initially, I uninstalled because a program has changed my page of the new tab to something unwanted and I literally had no way to change this back. Now, every time I reinstall, I get the error "cannot load the profile, it may be missing or unreachable", and I can't create a new profile. Whenever I try to any method of opening the profile editor, I get the error 'Could not load profile' then too. I can't access the folder in/appdata/roaming/mozilla at all. It is said it is accessable and access is denied, and tries to remove it tells me I have not permission (even if I'm the admin). No other difficulty I saw worked. Can someone help, please?

  I have done a virus scan, cleaned up one piece of adware, rebooted, and it worked all of a sudden. I don't know what exactly caused to start working, but he did, so I consider this issue closed.

• Could not load file or Assembly runtime being more recent than currently loaded run time

  I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.

  "Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »

  I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.

  Any ideas?

  Thank you.

  I found where this topic is discussed in detail a bit more.  It is in the TestStand reference manual that is installed with TS.  TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• Could not load file or assembly ' System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91 "... error so that the HD writer AE 3.0 graphic opening programme"

  Original title: could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies

  Hello I am looking for a way to solve:

  Could not load file or assembly 'System.Data.SqlServerCe, Version = 3.5.1.0, Culture = neutral, PublicKeyToken = 89845dcd8080cc91' or one of its dependencies.

  This message appears whenever I try to open a graphics program HD writer AE 3.0

  I'm running xpsp3 and all updates are underway according to Microsoft

  Hello

  1. were you able to use the program without any problem before?

  2. don't you make changes on the computer before this problem?

  Step 1: Repair of .net framework and check.

  Reference: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  Step 2: Uninstall and reinstall this program.