Taskbar freezes sometimes (Windows 8 Pro)

Separated from this thread.

Same problem here in 2015! :)

New computer. all drivers up to date. Virus scan shows nothing. Premium version of Malwarebytes. O 8.1

Taskbar glitches from time to time.  Sometimes the program icon will not display and it is just an empty box or disappears completely. Time freezes or disappears completely.  CTRL, Alt, dlt and restart windows or Explorer (file) not browser! Resets the taskbar and fixed for a short period.

This is a persistent problem since I built my pc. I reinstalled my operating system and drivers with no luck.

Hi John,.

Thanks for posting on Microsoft Community.

I understand that you are facing a problem with the taskbar and icons who sometimes freezes. The cause may be due to several reasons, as there could be a corrupted file or an application that can cause this problem, or there may be an error in the registry.

I would like to know some details to help you better.

  1. What is the brand and model of the computer?
  2. Do you receive an error message/code? If Yes, give the complete error message/code.

Method 1:

Start your computer in a clean boot and check if the problem persists. See below the help link.

https://support.Microsoft.com/en-us/KB/929135

This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows

Note: Please go through the section: how to reset the computer to start as usual after troubleshooting by clean boot of section of Kb to start the computer in normal startup after having resolved the issue.

Method 2:

If the problem persists, start a Scan SFC (System File Checker) and check if it helps. It will search the corruptions of Windows system files and restore corrupted files.

Reference: https://support.microsoft.com/en-us/kb/929833/en-us

Perform the troubleshooting steps. If the problem continues to respond to us with the results to help you best.

Tags: Windows

Similar Questions

  • Intermittent USB mouse freeze on Windows 7 Pro 64-bit. Tested with several mice that work fine on other computers.

    I am having a frustrating problem where my Wired Optical mouse appears to 'freeze' for 10 seconds on my machine Windows 7 Pro 64-bit. Meanwhile, everything else on the computer works fine, including the keyboard (connected through PS2). The mouse does not seem to lose power because down the red LED stays on. At the end of the freeze period, I hear the sound of Windows to disconnect USB, but there is no error or windows pop-up ads of any kind on the screen.

    Some more info about the configuration:

    * Core i7 950 processor
    * 12 GB of RAM
    * Radeon HD4950 video card (or almost)
    * The main SSD drive
    * 2 external powered USB drives, 1 powered MIDI keyboard, 1 USB dongle
    * Windows experience score 7.3

    I tried things that did not work:

    • Turn off all the power management, including the management of power supply for USB, USB hubs-> suspend to win power, etc.
    • Permutation of mouse. The problem came with three different mouse from different manufacturers.
    • Try the mouse on different computers of W7 Pro. Confirmed that the mice are not the problem.
    • Disconnected all other USB devices except the mouse. Problem persists.
    • Uninstalled all the drivers for the mouse and use MS default drivers.
    • Installed the software Microsoft mouse & keyboard center.
    • Installed the software from the manufacturer (ie. logitech) specific mouse driver.
    • Tried every USB port, the front and back, on my computer, including USB3 vs USB2.
    • Scanned for malware (using Malwarebytes)
    • Search for viruses (using Nod32)

    I must point out that NO other devices are having problems on this computer. My external hard drives all work perfectly. My printer when I plug it, works great, like my USB dongle. My MIDI keyboard never loses connection. Even when I have my phone connected Android, which normally creates a huge noise if I unplug it, never disconnects even for a second. It is therefore clearly a kind of mouse problem.

    The problem seems to occur regardless of what I do, although it seems MORE common if I use actually the mouse. If I'm just typing (as I am now) it seems not really to happen. On the other hand, sometimes hours go with no problem and other time it happens literally every few seconds.

    Remove the check to "improve the accuracy of the printer" logic. I had two computers windows 7 x 64 that gives me the same problem. When I tried a wireless mouse, the problem disappeared. they do not use the windows controls.

  • HP DM1-4110SD touchpad freeze and sometimes keyboard under Windows 8 Pro

    Hello

    I have the following problem:

    When I use the netbook with Windows 8 Pro (64-bit) after some time, the keyboard or touchpad will freeze. I have seen under drivers and downloads there is a fix Windows 7 (KB2621491), but this fix is not available for Windows 8.

    I tried to disable the sleep for the USB root hub, but that doesn't seem to work.

    Is the fix is going to be available for Windows 8, or y at - it another way to make this work?

    Hi Speeder.

    Most of the W7 drivers will work W8. I'm not sure that an individual. More than likely HP won't to material support for W8 on any system purchased before October 1, 2011.

    Take a look at this document http://goo.gl/CO6uV , which provides information on the upgrade of Windows 7 to 8, driver compatibility and much more.

    Please let me know if it helps.

  • PCI-MXI-2 causes w/SP3 Windows XP Pro to freeze

    Here are the specifications of the test machine which is the gel with the PCI-MXI-2.

    Motherboard: C7P67 (supermicro)

    Mobo has no embedded video so I've tried three different cards PCIe...

    Currently installed: Geforce GT 430 DDR3

    RAM: VS2GB1333D3 total (Corsair): 8 GB RAM

    PSU: 550W

    No other devices are installed.

    We have 2 cards PCI-MXI-2 and the two freeze Windows XP Pro w/SP3 at startup.

    It gets to the desktop and then, about 30 seconds everything is frozen, unresponsive keyboard/mouse, nothing...

    Removing the PCI-MXI-2 causes the operating system to work properly.

    I installed the NIVXI331 software for the driver. We tried an another C7P67 motherboard, same problem.

    I also tried different revisions of the BIOS as well as the latest BIOS for the motherboard, the same question.

    We are trying to solve this problem with this particular motherboard (C7P67) for our client.

    I have read the manual for the PCI-MXI-2 card and the rocking U17 matches what is on the card for a 'normal' functioning (1, 2, 3 switches are "off" with the exception of switch 4 "CT")

    I also tried the two PCI expansion slots are available on the motherboard, the same question.

    Any suggestions please? Thank you!

    Thanks for your response! For some reason, the cards work now with the motherboard. Nothing has changed.

    It was strange.

  • my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

    my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

    First run Memtest86 +:
    It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
    sticks are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Test your player - create a Bootable CD:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
    Test your drive with the car manufacture utility.
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
    (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    J W Stuart: http://www.pagestart.com

  • I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

    I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

    Hello

    1 is it only during the use of the internet?

    Method 1.
    a. click on start and then right-click my computer.
    b. click Properties.
    c. click on the Advanced tab and then click settings under Startup and recovery.
    d. under system failure, click to clear automatically restart it the box.
    e. click OK, and then click OK.
    f. try to reproduce the error message.


    Method 2.
    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Also I would ask you to update all the drivers of material from the manufacturer's Web site.

    I hope this helps.

  • I have windows xp pro. whenever I try to minimize all the windows they don't show in my taskbar.

    I have windows xp pro. whenever I try to minimize all the windows they don't show in my taskbar.

    You have only one monitor and your system is configured to use a single monitor?

    This can occur if you have several configured monitors and one of them are not connected or are turned off that you can't see reduced tasks.

    Whatever it is, you should be able to see a task enlarged, restored or minimized (unless the application has been configured to hide the task in the task bar).

  • Reinstall Windows 7 Pro on new 2 TB HDD freezes on Windows startup screen

    My 160 GB hard drive crashed and I am trying to install Windows 7 Pro from the installation disc that came with my computer on my new hard drive 2 TB.  I read the posts that took even freeze on Windows startup screen and I disconnected all devices and devices except the mouse and keyboard.  I don't have 2 GB of memory simms, 8 GB installed, but has released simm all but one.  I tried to reinstall Windows 7 Professional several times and whenever it crosses the screen of facilities, then when the computer restarts it freezes at the Windows startup screen.  Help!

    Evelyn,

    (1) I have an idea which may simply not work. Install the software of Western Digital's Data LifeGuard Diagnostics.

    (2) then select / click on the Seagate 2 TB of disk.

    (3) then click on the little icon above the list of player who scored "click to run tests.

    (4) in the popup windows choose the option "write zeros". Click 'Start' and select the fastest two write options who writes zero for beginners / before the command and at the end / last sectors on the disk. It will take about 2 minutes or less. Once the zero finished writing your drive will be in a State of 'Raw' (just as if you removed from the box for the first time).

    (5) open "Disk management", you should see a windows asking you to 'Initialize' the reader. Choose the MBR (Master Boot Record "option.

    Now try to install Windows.

    J W Stuart: http://www.pagestart.com

  • Why my open programs don't disappear from the taskbar in windows 7 pro.

    original title: why the my refill of programs open in the taskbar in windows 7 pro.

    Why the my refill of programs open in the taskbar in windows 7 pro.

    Hello

    1 how long have you been faced with this problem?

    2. did you of recent changes to the computer?

    3. it happens with all the program or program in particular?

    I suggest you check in safe mode if the programs disappear from the taskbar?

    Follow this link provided below to start your computer in safe mode.

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    I suggest also allows you to check user account again.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  • Windows 8 Pro freezes on my Samsung NP300E5Z-A07IN

    Hi guys,.

    I have recently upgraded to Windows 8 Pro to Windows 7 & since then it started to freeze every now and then...
    It freezes for probably 2 minutes & start automatically works fine.
    have you noticed that every time it freezes the access of disk on my laptop light is always on and not flashing.
    have installed all windows updates & have all the updated drivers too (checked from the Manager of peripherals & Software Driver Reviver).

    What should I do to solve it? its really frustrating me now.

    Windows Update will do?

    Thank you.

    A friend suggested me to install Intel Rapid Storage Technology App for Windows 8 & it solved my problem.

    I worked like a charm.

  • My keyboard does not work sometimes unless I reboot Windows 8 Pro?

    I installed Windows 8 Pro as an upgrade of Windows 7 Ultimate last Friday.  Everything works fine, but often after the awakening of my system from sleep, I can't use my keyboard and need to login with the keyboard of the screen.  After login, I still use the keyboard of the screen.  No problem with the mouse.  Rebooting always fixes the problem.  All of the suggestions.

    Len

    Hi Len III,

    What is the brand and model of your keyboard?

    If you already check the manufacturer's website and make sure that you have the most recent driver for your keyboard version.

  • IMAP operations freeze sometimes Thunderbird

    I just changed using a new computer with Windows 8.1. Thunderbird (latest version 31.2.0), now sometimes hangs (not responding), for a minute or two for the IMAP operations. It didn't happen in Windows 7, and all parameters are identical.

    I have not found no consistency to the problem at all. Sometimes it doesn't happen for a while, other times it happens on each IMAP operation. It can happen when you move a message from one IMAP folder to another, or when you delete a message from an IMAP folder or by emptying the trash IMAP.

    Things I've tried and that made no difference:
    -Create a new Thunderbird profile.
    -Disable all add-ons.
    -Change the "maximum number of connections to the server to cache" to 1 for the IMAP account.

    It took 4 hours of troubleshooting, but I finally found the culprit.

    Windows Search

    He did not freeze while Windows is in Mode safe mode with networking.

    I uninstalled Kaspersky, disabled all non Microsoft Services, stopped all startup items, then started turning off Microsoft Services. Finally I could reduce to Windows Search. Then I re-enabled all the rest but Windows Search, tested, then activated Windows Search again.

    Ultimately, the way to solve the problem is in the Thunderbird Options:

    Menu bar: tools: Options: Advanced: general tab: systems integration:

    Clear the check box "Allow Windows Search search for messages".

  • Aurora running, but can not be played on Desktop Windows 7 pro 64-bit

    I've been using Aurora for several years with Windows 7 pro 64-bit with the two latest major 28/29 Auroa just missing from my desk after clicking on the icon on the desktop, I tried to uninstall, but the system told me I had still Aroura running uninstall so I had to reboot my PC, I could uninstall I then reinstalled Aurora and a pinned icon appeared in the taskbar, but when I clicked on the icon on the desktop the hourglass turned but no Aroura started on the desktop, so I went through the whole thing again and uninstalled Aurora and installed Firefox V26 and now it has progressed to the last version that has disappeared as exactly the same way.

    What can I do if I use Aroura again because it is very good and safe to use?

    I can't use the troubleshooting info as I can't see Aurora/Firefox to view or copy/paste the info shown.

    Pete

    Thank you solved the problem, I restarted the PC and now Aurora works again thanks.

  • Equium M50-216 freezes in Windows installation

    Hello

    I have the laptop next Equium M50-216 (PSM57E). Im trying to get to Windows XP Pro. When I boot on the CD it goes into the Windows Setup screen and all of a sudden freezes at the "Setup starts Windows. I don't get any CD or HARD drive activity. I have hold switch on stop and restart.

    Any help/advice would be appriecated.

    Thank you very much in advance.

    Hello

    It is very unusual, but before starting the procedure of facilities please make sure that all external devices are disconnected.

    Do you use legal copy?

  • CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

    Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

    Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

    Oscar

    Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

    The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

    You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

    You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

    If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

Maybe you are looking for