6.1 Data Protection issues, please help me!

Similar Questions

• ADF 11 g: create with the data control problem: Please help

  Hello
  
  In my application, I tried to create a customized data controller.
  
  I created a Java class results and a bean ResultsBean class.
  Then I selected class results-> right click-> data controller to create.
  The Results.xml is created
  Everything is going well so far.
  
  Then I updated the details of class Bean in Results.xml and tried to re-create the data controller but did ResultsBean.xml ' t formed.
  
  
  In other words ResultsBean have not associated with outcome data controller.
  Please help on this.
  
  Version of the ADF: Studio Edition Version 11.1.1.3.0
  Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  
  Thanks and greetings
  Maryline Roussel

  Yes you use generics to the JDeveloper type, how the JDeveloper Assistant know the ResultBean is used to return an ArrayList value?

• I get the error code message please connect firewall and protection antivirus please help

  I get the error code message please connect to the internet to validate your serial number, but I'm connected to the internet, I have disabled firewall and virus protection please help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• VIP - ANALYZE Configuration Issues - Please help!

  Hello world
  
  First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
  
  I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
  
  After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
  
  However, during root.sh run, I get the following error:
  
  /U01/app/11.2.0/grid/root.sh
  --------------------------------------------------
  CRS-4266: Vote or managed to replace the files
  # File group universal name Id disk STATE file
  -- ----- ----------------- --------- ---------
  1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
  Located at 1 vote (s) disk.
  CRS-2672: attempt to start 'ora.asm' on 'sol1.
  CRS-2676: beginning of "ora.asm", the successful "sol1"
  CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
  CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
  FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  I have re-run this command to see the real errors
  
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
  ------------------------------------------------------------------------------------
  RPRC-1013: failed to start of ora.net1.network resources
  RPRC-1064: failed to start of ora.net1.network on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  RPRC-1079: failed to start of ora.sol1.vip resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
  RPRC-1013: failed to start of ora.ons resources
  RPRC-1064: failed to start of ora.ons on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  
  
  I ran the following commands to know the State of SAN and SCAN-headphones
  
  srvctl status scan
  --------------------------------
  VIP scan1 SCAN is enabled
  Scan1 VIP SCAN does not work
  VIP SCAN scan2 is enabled
  Scan2 VIP SCAN does not work
  SCAN VIP Scan3 is enabled
  Scan3 VIP SCAN does not work
  
  srvctl status scan_listener
  --------------------------------------------
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is not running
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is not running
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is not running
  
  srvctl config scan_listener
  ---------------------------------------------
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  
  Here is the content of my/etc/hosts and /etc/resolv.conf files
  
  cat/etc/hosts
  -----------------------------
  # Public
  192.168.56.101 sol1.localdomain loghost sol1
  192.168.56.102 sol2.localdomain sol2
  192.168.56.160 solfiler solfiler.localdomain
  
  # VIP
  192.168.56.111 sol1-vip sol1 - vip.localdomain
  192.168.56.112 sol2-vip sol2 - vip.localdomain
  
  # Private interconnection
  192.168.0.101 sol1-priv sol1 - priv.localdomain
  192.168.0.102 sol2-priv sol2 - priv.localdomain
  
  # Scan
  #192.168.56.201 ground-sweeping ground - scan.localdomain
  #192.168.56.202 ground-sweeping ground - scan.localdomain
  #192.168.56.203 ground-sweeping ground - scan.localdomain
  
  
  cat /etc/resolv.conf
  ------------------------------------
  #
  # AUTOMATICALLY generatedFROM_SMF_V1_
  #
  # ATTENTION: THIS FILE GENERATED FROM SMF DATA.
  # DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
  # See /etc/resolv.conf (4) for more details.
  
  Search localdomain
  nameserver 192.168.56.101
  nameserver 192.168.56.102
  nameserver 192.168.1.1
  
  
  Here are the details of the network
  
  dladm show-phys
  ----------------------------------
  MEDIA SPEED DUPLEX LINK
  Net1 Ethernet up to 1000 complete e1000g1
  NET2 Ethernet up to 1000 full e1000g2
  Net0 Ethernet up to 1000 complete e1000g0
  
  ipadm show-addr
  ---------------------------------
  ADDROBJ TYPE STATE ADDR
  127.0.0.1/8 ok static lo0/v4
  Net0/v4 dhcp ok 10.0.2.15/24
  Net1/addr static 192.168.56.101/24 ok
  NET2/addr static 192.168.0.101/24 ok
  OK static lo0/v6: 1/128
  Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
  
  
  I did the nslookup on my name SCAN
  
  Nslookup ground-scan
  ----------------------------------
  Name: sol - scan.localdomain
  Address: 192.168.56.202
  Name: sol - scan.localdomain
  Address: 192.168.56.203
  Name: sol - scan.localdomain
  Address: 192.168.56.201
  
  I ran the following commands to see if the installation process correctly reads my SCANNING configuration
  
  srvctl stop scan_listener
  srvctl stop scan
  
  srvctl config scan
  -----------------------------
  SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
  SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
  SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
  SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
  
  So it's good reading ANALYSIS information there is so no problem
  
  I tried to start listeners to SWEEP and ended up with the same mistakes
  
  srvctl start scan_listener
  ------------------------------------------
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
  
  If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
  Requirements for the clusterware.
  
  I followed all the steps of the system requirements for installing under solaris 11.
  
  After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
  
  What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
  
  Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
  
  Concerning
  Terry.

  Hello

  the problem is the host name of the server is resolved is on the 10.X.X.X network.
  For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.

  If you have the following options that you can try:
  a.) change the server to have the host name to resolve to the 192.X network
  (b) change the order of the network adapters
  (c.) remove the network 10.X.X.X at the moment of installation

  Concerning
  Sebastian

• !!! Very Urgent - Production Issue - please help

  Hello IDMers,
  
  We are facing a problem in production, we have updated the AD process form yesterday. Two fields Type Employee and Employee ID field as a process user AD had up-to-date for all existing users. These two fields are now empty for all users.
  
  But these fields have the appropriate value in the User Table of Xellerate for all users. Now I need to some how fill in the Type of employee and employee ID for all employees of the User Table to your AD process.
  for example: consider an employee called Pierre - type emp is full-time and Emp ID is 100; i'm in the IOM user Table, but this user is configured with AD and now I have to update his AD process form so that these two fields are filled. I need to do it for all users of the IOM. I suppose pre-population adapter triggers only when the form is created for the first time. Please suggest me some ideas.
  Is there an easy way to do this task?
  What is my way of thinking, I need to have a scheduled task that basically loop through all users and updates of their field and the employee id as the user Xellerate Table AD user.
  
  Please help me with this because it is very important.
  Thanks once again everyone else for your support all this while.
  
  Kind regards
  ~ THE VSN

  You want to send this info to AD?

  If Yes

  CHS task to create and update the form of process by using APIs.

  If not

  Solution 1:

  Use DB query to be updated directly as a database if you have access (never Recommneded) but the task of 1 minute to do this.

  Solution 2:

  Create CHS task to run the DB query.

  Solution 3:

  Check the VSH utility that comes with IOM.

• Small blue screen issue Please Help

  Hello

  I turned on my pc this morning an appeard blue screen with something like the following below.

  I've never seen before read something like - if seen first computer reboot /hardware - then went to connect (before I pressed F9 - diagnostic tool

  to see if something was wrong--all passed) then watch Windows error recovery screen I pressed "Start windows normally" because I don't know what the other 3 meant that I'm not this technique.

  Logged in - Message appeared "Windows has recorved against an unexpected closed, a windows problem caused to stop working correctly". I looked at the event log, but I have no idea what I want to really, I vacuum the back on pc - the dust ect... Please help because I do not want to see it again / please if anyone is nice enough help me please that they have no basis.

  I'm running Windows Vista Home premium service pack 2

  I look forward to your reply.

  BS

  I understand.  The files are newspapers of accidents and have nothing to do with your operation systems.  You can do what suggests the wiki for when access is denied without too much worry about a problem

  Try this

  If you get "access denied" try this method

  First, create a folder on the desktop and call Minidump

  Open the C:\Windows\Minidump folder and do the following:

  Home > select all > Home > copy to > choose location > Minidumps > copy

  Then right click on the Minidump file > Send to > compressed (zipped) folder.

  Then download the compressed (zipped) folder newly created on Onedrive and provide a link here.

• I am facing some problems with the installation of data protection. Please see below for details

  We use the data protection in our project.  The research that I have done in protecting data, I realized that the FDM adds the data in protected intersections to load the file that is created by FDM via the import process. The problem is that there are actions given in HFM and I get an error that says: "error: load the file cannot contain action data according to user option." I'm pretty sure that some user option (it would be great if you have an idea where I can find this user option) prevents data already present of shares to be loaded via FDM. Have faced this kind of error before? Is there a work around on this?

  Thank you

  Rohit

  Hello

  The user option which is the origin of the problem is 'File Contains Data property'. You must make sure that this load option is enabled when you start loading in FDM process if the dataset that you present must contain data of shares.

  Kind regards

  Simon

• Small desktop Inspiron computer (3647) Driver Issues Please Help

  I am new to this forum n im really have a problem, I downloaded the drivers directly from the dell Web site... but there are some drivers that do not install, I looked in my device manager, it is highlighted yellow triangle three...    1 generic bluetooth adapter...  2. network controller. 3 pci simple communication controller but I can not even free wifi... could someone please help solve this problem?     Thank you

  Hi jasonm6565,

  I suggest you try to download the driver for the card wireless to another browser.

  Also, answer us with the snapshot of the Device Manager with the WAN adapter.

• Simple Data Acquisition question please Help!

  I have problems with a simple LabVIEW program.

  I'm analyzing two inputs voltage and at the moment I have the VI work so that both are analyzed at 10 k Hz simultaneously and displayed in two tables of waveform.  What I would do, it is write values for them at 1 Hz in an excel spreadsheet or a text file with the time, the value of the first and the second value.  So I would create an array of [value1, value2] and export that to a line in a text file, I can analyze and then later in excellent.  I want to keep it that way for the duration of the program. In addition, it is possible to have the LabVIEW to generate such a table statistics once the user closes the loop, it would be even better.

  I can only assume that it is not too complicated, but I've never done any export data and just a quick explanation probably will save me a lot of time.  Any help would be great, even if it's just to say "use this feature.  Thank you very much.

  Pieter

  Pieter,

  Please post on the Forums of NOR. I could take an example that was similar to yours and organize data in the format you want. I've included a photo as well as saved for LabVIEW 8.6 VI. I took the data from the berries that were from the channel to read and handle while he was in the format of time, channel 0 channel 1. Hope this helps and let me know if you have any questions. Thank you!

• Lost data. Urgent, please help.

  I have a Toshiba laptop A60-152. I had my theses on my desk without a backup. Somehow I had to restart the PC, when I did, it has not been implemented in service. There was a fliker appearing with a blu screen and was constantly restarting the computer automatically. I then used the recovery DVDs of product supplied by Toshiba that has installed a new windows on my main partition, eliminating my thesis kept on the desktop.

  Does anyone know if there is a way to retrieve my thesis which was a MS word document? Or is we know that Toshiba in the CD software formats the hard drive before installing Windows or did a quick format?

  Kindly help.

  Kind regards
  Murad.

  Hi mourad,.

  I think your recovery CD made a "quick" format, so the content statistics exist on your hard drive is not really too written during the recovery process. However, existing files are rendered inaccessible because the file structure is not maintained and the operating system can no longer search files.

  The recovery process will usually store the new operating system in the same location on your hard drive, unless you have added a lot of new files and data as you run the recovery is quite possible that your thesis is still there even if you can locate is no longer.

  There are specialist recovery companies that can try to recover the data for you, but they tend to be a bit expensive. It may be useful to approach some of them and ask quotes to try to pick you up the thesis.

  HTH

• Unable to connect to the internet/driver issues please help :(

  Hello. I installed a new copy of Windows 7 Ultimate 64 bit on my computer. Everything works well except for two pilot numbers. I also can't connect to internet at all no more. I guess it's because of one of the pilots. The two drivers that I have problems with the network controller driver is a unknown device in the PCI Bus. Nothing is connected to this Bus by the way. It just says: unknown device. My laptop is a HP Pavilion G6 2123us. I tried all the drivers for this laptop on this site and none have seemed to solve the problem. I looked really hard now and it's pretty frustrating

  More information that I can give is the ID of equipment for both pilots:

  Driver network controller hardware ID:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  Unknown Device hardware ID:

  ACPI\HPQ0004
  * HPQ0004

  I wasn't sure what hardware IDs to give, so I just posted all the. I hope someone can help me please. I greatly appreciate it.

  Hello:

  You need this driver...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  and this driver...

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105047-1&CC=US&DLC=en&LC=en&os=4063&Product=5273777&sw_lang=

  Paul

• I want to download a trail of Illustrator, but its telling me that my software is up to date can you please help me?

  She says:

  You run an operating system supporting Illustrator is no longer. See the system requirements for a complete list of the supported platforms.

  Can someone help me please?

  
  

  In this case, you can download Illustrator CC 2014 trial of direct download link:

  http://prodesigntools.com/Adobe-CC-2014-direct-download-links.html

  For information about system requirements, see link below:

  System requirements | Adobe Illustrator

• I think I lost my data all! Please help me!

  Well, today I have reinstall my system (which I use Archlinux.)

  I install a firefox and then I try to sync my data (I have a lot of bookmarks, my password, and my history.)
  

  But I forgot my account password! So I try to change my password.
  I got the Email, and I finished my chandge massword.

  So I try to synchronize again. I did, but noting happened!
  I think it's about firefox so I just wait, I think that this problem will be resolved tomorrow.

  Unfortunately, this afternoon, I add a few bookmarks. And now I try to synchronize again. Sync worked! But noting happened yet.
  I fell some fear. I try to delete all the bookmarks that I just added and disconnection. Then I synchronize again and... My favorites that I just added supported all! But I lost my all before the data.

  These data are very important. How can I find them?

  Unfortunately, if you do not have a backup of the data on a CD - r or flash stick your data is gone, unless you can recover it using Recuva - data recovery program or whatever is the equivalent of Linux.

  Sorry, but when you ask that a new password to synchronize the data on the server is deleted. The original password was the basis of the encryption "key" that was used for encrypting your data as it was sent on the server; different password prevents Firefox to be able to decrypt your data when it is returned to the device.

  The thing is that Sync was never intended to be a 'cloud' for the storage of personal data of Firefox for a single device. Its purpose is to synchronize data between multiple devices. And if the user meets what you did - could not remember their password and needed to set a new password - Sync would replace the deleted data from the other device that still had the data - the device that had not been "reinstalled".

• Photon: Ringtone issue Please HELP!

  My father has a motorcycle Photon 4 g the next day it came out and everything was going well until the day one of his contacts called and the default ringtone is out rather than custom it they assign. Made all to remove the battery for a while, the factory reset and also it took to Sprint and they checked it and also a factory reset and none of these things worked, so to the they gave him a new, but the problem persists. Someone now, any difficulty or if Motorola has an update on how to fix it? Just in case, everything is stock. Any help would be grateful.

  
  

• HOW can Z30 blackBerry I REDUCE the USE OF DATA ON Z30, Please HELP.

  Hello to all, kindly advice me on how I can reduce the use of internet data on my blackberry, it seems to be using data at a very high speed than expected.

  Data settings - App Manager - Device Monitor - Mobile Data use, check apps.

  Hub - 3 points (more) - settings - display and Actions - download Images automatically = OFF.