6 d to iOS 6.1.2 WiFi problem?

I'm suddenly having problems connecting my iPad4 and iPhone5 to my 6 d in connection Wi - Fi direct mode.  I was not able to connect since the update to iOS 6.1.2 with either.  I can still connect mode "infrastructure" If the device is connected to my work or home network everything first, but don't can't direct connection.

Someone at - he lived the same problem?  Or anyone was able to connect successfully with iOS 6.1.2.

Thanks for any help!

Jim

My bad.  Found a solution.  I had to "forget network" on each device and re-setup of each of the configurations of device on the camera to issue new passwords.  Could re - connect each device and bring then log in again.

Problem solved.  Oh, one thing: if any of you have more than one device (I have an iPhone and iPad), you want to have two settings on the 6 d: one for each device.

Jim

Tags: Canon Camera

Similar Questions

  • iOS 9.2.3 wifi problems. DIFFICULTY TO PLEASE AS SOON AS POSSIBLE

    Since the update to 9.2 & up to my

    phone had bad problems with wifi. My modem is in the living room and when I'm in the living room I have 2 bars. I have 2 other iPhones a Tablet and a computer laptop while on wifi and they all 3 bars at the same time but my 6 on 9.2.3 is not (while in the same room as the modem) then when I go upstairs to my room, I have no wifi at all maybe sometimes I will get a bar but it would still be a great connection. I did tests of every iPhone & my 6 speed is 4 times slower than my iPhone 4 and a little more than half the speed of my 5 s. I did everything. Forgotten network, re inserted the sim card, reset the network settings, soft reset even changed the dns, but nothing works. I can still use my wifi in the comfort of my room with this iOS 9 x. I noticed every wifi around me all have a bar even my neighbors but my own? I am feet away from? This is ridiculous and needs to be repaired as soon as POSSIBLE

    Did you ever ensure that your router settings are optimized?

    Recommended settings for the WiFi routers and access points - Apple supported

  • Ios 9.3.1 WiFi problems

    My iphone does not connect to wifi after ios 9.3.1. Is there a solution? Thank you, Karl.

    I have the same problem. Try this link, it might help you

  • iOS 9.2.1 wifi problems (iPhone 5)

    Hello world

    still using my iPhone 5 as my main but lately known problems of major wifi phone: she just will not connect to my wifi unless I force to (the wifi menu to minutes until he shoes he has connected to wifi). When it shows then it is allegedly connected to the wifi I don't get any 'real' connection - the phone charge not any whatapps, web pages, etc... So I have to stay in my mobile network to be online. It is so incredibly annoying since - let's be honest - without an internet connection, the phone is almost useless! Phone works in other wifi. I first noticed this problem (a few days) after the update to 9.2.1.
    Another iPhone (4S and 6 - even 2G) works fine in my wifi iPad and the MacBook!

    I've read several discussions about this sh * TTY number and do not operate again. Is it possible that is has something to do with the iOS 9.2.1? All other mobile devices iOS in my household are not running this version and work correctly...

    Things I tried and it does not work:

    -reset the router (However it obviously was not the source of this issue since other devices worked properly)

    -set the new DNS ("8.8.8.8" - read than some part... bullsh * t!)

    -reset the network configuration

    -power off iClould

    "Have you tried turning and turn it on again? Yes, I have! Thank you Apple!

    -soft reset

    -hard reset (return to factory settings)

    Still does not connect. As Im writing this post I think more than its due to some sh * programming iOS 9.2.1 ATS... If this is the case, I consider that it is incredible that Apple does not allow to go down to another version of the iOS (as if it were possible, that's what I would do before I put my phone back to the factory settings)!

    So I hope that there is someone out there who may have experienced the same problem and can fix it somehow

    Update: the iPhone connects to my wifi 5 first Minutes I turn on wifi phone. After 5 minutes, it will not be any connection to the internet that it shows that I have a strong wifi connection... When I pass it still works on my phone it again will run for 5 minutes...

    iPhone works fine with wifi systems and it worked with mine for 2 years now until a few days after the software update

  • iPad 2 iOS 9.2.1 WIFI randomly turns off by itself

    iPad 2 iOS 9.2.1 WIFI randomly turns off by itself. What can I do to fix?

    the ITI is probably just the wifi in your House and not iOS

  • iPhone wifi problem 6 ios 9.2.1. WiFi show still unable to join or incorrect password! Help, please

    iPhone wifi problem 6 ios 9.2.1. WiFi show still unable to join or incorrect password! Help, please

    You need the correct password to join any Wi - Fi hotspot which are not free.

    When you try to connect to Wi - Fi.

    Have you tried

    Settings > general > reset > reset network settings?

  • Got wifi problem ios 9, how to fix? Help me

    WiFi problem

    Writing an effective question of communities to Support Apple - https://discussions.apple.com/docs/DOC-5931

  • iPhone WiFi problem

    Hey, my iPhone 5s has a Wifi problem. I'll send text messages, but will not work iMessage. I can receive emails and receive phone calls. But, when I open my apps video/social media (Youtube, Amazon, Instagram, Snapchat, video etc.), the wifi does not work. Can someone tell me how to fix it? Thank you

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

  • iPhone wifi problem 6

    iPhone wifi problem 6

    And what is this WiFi problem? No one here is a mind reader.

  • 10 Windows WiFi problems

    Hello

    I have a Windows 10 partition on my MacBook Pro (Early 2015) retina. I use Windows on a regular basis, and recently, I have a lot of problems with my WiFi. Today, I completely lost my private WiFi connection and I can't solve this problem. I restarted my router several times and nothing has changed. I installed the Windows updates before - maybe that's the reason? Is it possible to reinstall the Boot Camp software? I currently have version 6.0. I can only find the versions 5.x on Apple's site. Or how can I fix this? In my device manager, the card network Broadcom 802.11ac is listed and even my router said: that the MBP is connected to WiFi. The network card is also says that I'm connected to the network, but access is limited (no internet access). WiFi works fine on my other devices like my iPhone 6 s. If you need anything else to know, feel free to ask.

    Thank you in advance.

    This might help: http://techsupp0rt1on1.blogspot.fr/2013/12/windows-7-wifi-problem-solutions-with .html

    Another discussion had the same problem as you and kind of figured it: Bootcamp wifi detects only after updating mac OS x wifi networks

  • HP pavilion 15-ab522tx: wifi problem

    When I surf the internet, I have several errors in dns which never gets fixed for troubleshooting. I tried to contact the service center, but all they do is to reinstall windows and all files m went whenever they do it! I've been there for more than 5 times, but no solution has been found and its almost 6 months today because I bought this laptop. I am facing this problem since the first day I got this laptop.

    SOMEONE PLEASE HELP ME! REALLY ANNOYED WITH THIS PROBLEM

    Hello @jay05,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I came across your post about the WiFi problem and wanted to help!  I understand that you have found the DNS errors.

    First of all, try to review the steps offered by Community Member

    @Great-Christine-Tree:

    First of all, we have a step by step guide to guide you through the process of diagnosis here:
    Troubleshooting your wireless network and Internet access

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Source: fixes Common for wireless connectivity problems.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • P500 Lenovo WiFi problem

    Hello

    I have laptop Lenovo P500 running under windows 10. Recently, I have wifi problem. The problem is that when the laptop is not connected to the charger wifi does not work. Sometimes, it is connected to the network, but shows a limited access, sometimes wifi is diseabled. Even after I troubleshoot it seems to work for a few minutes. but then, it's the same problem.

    Note: there is no problem with wifi when the laptop is connected to load it (works fine). The problem is that when the tower is not connected to the charger. For this reason, I always the laptop is connected to the charger.

    All solutions?

    anupshakya wrote:

    Hello

    I have laptop Lenovo P500 running under windows 10. Recently, I have wifi problem. The problem is that when the laptop is not connected to the charger wifi does not work. Sometimes, it is connected to the network, but shows a limited access, sometimes wifi is diseabled. Even after I troubleshoot it seems to work for a few minutes. but then, it's the same problem.

    Note: there is no problem with wifi when the laptop is connected to load it (works fine). The problem is that when the tower is not connected to the charger. For this reason, I always the laptop is connected to the charger.

    All solutions?

    I don't know if this is related to your problem, but using the battery will cause the unit to run in a different way compared to the mode high performance when it is plugged. So you can try to change the power plan to high performance in battery mode. Of course, this will cause a more rapid evacuation of your battery.

  • WiFi problem after upgrade to Windows 10

    Greetings!

    I read a few posts on WiFi problems after the (improper) upgrade of Windows 10. I have a ThnkPad T530 which I've upgraded to Windows 10 Windows 7 in September (too late to roll back). Here's my question:

    I have three computers on my desk. This standard T530 running Windows 10, a ThnkPad E555 running Windows 7 and a Dell running Windows 8. I used all three last Friday. I installed Norton on all three Friday and everything went without a hitch. When I first started their return to the top of this morning, the two others came online as usual. The ThinkPad T530 connected by a router in the company, but has no access to the internet. I can connect to the hotspot on my phone and it connects fine. I tried to turn the WiFi connection and then turn it on again, restart, by killing and restarting the business connection, etc. Nothing changes.

    Help, please

    Ben

    Try the following:

    Open administrator command prompt:
    http://winaero.com/blog/how-to-open-elevated-command-prompt-in-Windows-10/

    Then, run this command:
    netsh int ip reset c:\resetlog.txt

  • E-all-in-one printer WiFi problem 3520

    Product name: 3520 e-all-in-one printer

    WIFI problem ofline whenever we want go print

    I bought a HP 3520 printer e-all-in-one, cause it can print ussing WIFI. But I am very satisfied! Whenever I want to print, the printer go to ofline and is not able to perform the task of printing sent from my laptop. On my laptop, I have windows 8 and I installed the right driver. Yet he expect regeister once more my printer and install the driver all over again before finally seeks to print. For me with the amount that I have to print this is does not work!

    I'm regretting that a lot i let the salesperson talk to me by buying a Hewlett packerd. Because I have this printer now a little more than six months and already want to trow I have a very high roof. Previously I also had bad experience with a Hewlett Packerd printer!

    Hi idebont,

    If you haven't already done so, please run the PSDR.  Find and fix common printer problems using the tools of diagnosis HP for Windows?

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

    This ensures that the printer is full on and can help this situation.

    We need to know if the printer or router is to lose the connection.

    You have a flashing wireless to the printer when you try to print from the computer or is the light solid?
    If it is flashing then the printer tries to find the network.
    If the light is solid, it is on the network. Try to print from a mobile device, if they are configured at the printer.

    Print a configuration page to see if the printer has a valid IP address.

    Printing a Network Setup Page.

    Type the IP address in the address bar of your web browser. (Internet Explorer)

    You can access the Web server integrated for the printer when the printer is in offline mode on the computer? (EWS)

    If you have a valid IP address and you can access the Web server integrated for the printer, then perhaps changed the IP address assigned to the printer to the router. So the origin of the computer does not find the printer. (setting up a static IP will solve this problem)

    Check the port showing on the computer to verify that it matches the IP address of the printer.

    Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

    Click on configure port to display the IP address.

    If the IP address does not match, and then create a new port with the new IP address.

    Close the port to configure.

    Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  • Intermittent WiFi problem after upgrade to Windows 10

    My acer aspire V3 - 571 has been intermittently lose WiFi for the last 2 days since Windows 10 Windows 7 Home Premium upgrade.

    The Aspire has:

    Driver Atheros wireless network adapt AR5BWB222 10.0.0.38 Wednesday 2/15/12

    So far, I have:

    1. in the properties Atheros AR5BWB222 Wireless Network Adapter, I unchecked the box in the tab property management who read allow the computer to turn off this device to save power.

    1B. Made sure flight mode was in the off position.

    1 c. Forget exactly where I did, but made certain settings in another? location have been set to "Maximum Performance".

    2. check that the firmware is updated on my network router, the value 2 of WPA - PSK (AES) security.

    3. search through many forums to read the responses of people upgrading Windows 10 WiFi issues - seems it is a widespread problem, although no one said that the WiFi signal loss was intermittent, as is my laptop. Shots of the Internet for my research also shows WiFi problems occurred in the past for installation of Windows 8. (So far have not come across mentions of WiFi problems for the latest installations of Windows 7).

    4. in exploring my laptop, I came across a page of Microsoft Updates - SEE ATTACHED. I was surprised to find that these updates go out quite frequently during the day. For example, 10 separate updates between 23:30 and 16:24 on August 1 and 18 separate updates between 12 h 06 at 15:57 on August 2.  Included in the record of updates for August 1 and August 2. I am aware that Microsoft uses my WiFi to download updates AUTOMATICALLY. It is possible that this intermittent intermittent interruptions of the WiFi update download?

    5. this afternoon, when the WiFi did not work for Windows 10. I reinstalled as a dual boot Ubuntu 14.04. I have had no trouble to connect to the WiFi for Ubuntu.

    Not yet:

    1. I haven't tried connecting the laptop via an Ethernet cable to my router during one of these WiFi failure.

    2. my ISP is a VOIP/Internet, using a Westell and a single Cisco router configuration. I have not taken into account if they can be a cause of the problem.

    3. I read on a forum that someone corrected their problem with WiFi connection by changing their setting include TKIP security router

    NOTE: I need to put Windows screenshot attachment 10 updates in a response email separate to this post as this post does not accept the attachment.

    Would appreciate your comments and suggestions. Thanks in advance.

    I'll probably also put this on a Windows 10 forum elsewhere.

    Hello!

    FYI, this has worked for me, finally a solution!

    The strangest thing - I have uninstalled the driver Atheros. Do NOT reinstall it. After uninstalling the driver Atheros, a right screen Windows 10 panel immediately appeared style - either on advice of Panel or in the page settings of WiFi, was asleep, can't remember which - that contains an entry box marked my wifi password. I entered the password and boom, the wifi worked. He has been since.

    Once again thank you. Mark resolved.

Maybe you are looking for

  • compilation albums

    Why my compilation albums are placed in a section that is unique? I'd rather they were in alphabetical order like the rest of my albums. Anyone know how I can expose my music as I want. The people at Apple will continue to spoil the iTunes format or

  • want to update cpu + gpu

    I have a m7690e 2 years old Pavilion and my gaming begins to lag, depending on the game. For example, I can play ep.1 Half Life 2 and 2 on high but other games like CRYSIS or unplayable FEAR. I was wondering if the new AMD Phenom processor (AM +) wou

  • Cannot use Windows Update - KB982132 and KB972270 fail to install, error 0x800A0007

    I can't using Windows Update for two 'critical updates of security". I got anumber of error messages, but the last was 0x800A0007. This is nowhere on their support pages. Can someone suggest a possible solution?  (If I can solve this problem, I can g

  • My mediaplayer will not read my cds__

    can you help me

  • Windows thinks it is not authentic now it's on a virtual machine - what should I do?

    I just got a new PC, and not to lose the info on my old PC, I created a VM from it (using VMWare vCenter converter) and it loaded into the VMWare Player on my new machine. However, when I run the virtual machine, I get a message box pops up telling m