6/HTML5 URL for loading Captivate but Captivate page comes down to a 404 error

Similar Questions

• I search for updates and tell me that two important updates are available for my system but when I try to install I get error code 800b0100

  I search for updates and tell me that two important updates are available for my system but when I try to install I get error code 800b0100

  http://support.Microsoft.com/kb/956702

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  If the above does not resolve the problem:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Creation of Application Simple Webworks - remote URL for loading problem

  Hi, I'm looking for this example:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/creating-your-first-application-...

  But I'm not able to load the remote URL.

  I am able to load the local file perfectly, but whenever I try to load a remote URL, I got:

  Local Connection Timed Out after ~ 120000

  I tried different ways to load a remote URL (via a simple link HTML, javascript, and Ajax)

  With the help of my config file:

  I also tried various configurations of subdomains and uri.

  I use the Simulator for 9800 6.0.0.534

  I really don't know what could be the problem. Could be my installation of the SDK Webworks? It is a kind of permission?

  BR

  If you are running on Simulator, then you must also run the MDS Simulator. Without it, our web browser in the Simulator won't work either.

  You can configure your debug configuration in Eclipse to automatically start the MDS Simulator when you launch the debugger.

• my windows vista (reboot) for 6 hours, but same screen comes to show that his research and nothing happened?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs that you have problems with windows vista starts do not
  • Error messages, it's that my startup repair tool going but its still looking for problems
  • Recent changes were made to your computer no change, it's just stopped working suddenly and close
  • What you have already tried to solve the problem I tried startup repair, but that has not worked. I've tried off DURATION and attempted to start normally and then after a while my screen goes blank.i tried the system restore, but it did not work. I AM ALSO AFRAID THAT I LOSE MY DATA, CAN U PLEASE GUIDE ME THROUGH WITHOUT LOSS OF DATA
   
  Hello
   
   
  1. don't you make changes to the computer when you used the last time? For example, you have installed updates or a program of ny?
   
  Method 1.
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 2.

  Step A.
  Start your computer in safe mode and check if it starts.
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
  Step B.
  If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 3.
  I recommend you to restore system using a Windows Vista DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc.
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
   
  For more information see the articles below:
  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Complete the URL for popupURL of a table/Page element?

  Hi all
  Someone please tell me if the URL to run a report BEEP can be filled with a table/page element when using popupURL and if so, how?
  
  Background:
  I have a Table called TBL_LETTERS with a column varchar2 REPORT_URL
  I have a Page (Pg 303) that fills a Page of text element (P303_REPORT_URL) with a URL string appropriate to the table.
  
  Here's my problem:
  I would like to replace my function javascript to work (see below):
  
  Run myLetter_40()
  {
  popupURL ("& BI_URL. Guest/DEV/TEST/FRM_40/MM_40/MM_40.xdo?_xpf= & _xpt = 1 & P_CASE_ID = & P303_CASE_ID. & P_PERSON_ID = & P303_PERSON_ID. & _xt = MM_40_xf = rich text ');
  }
  
  with something like:
  
  Run myLetter_40()
  {
  popupURL ($x("P303_REPORT_URL").value);
  }
  
  .. .but it does not work.
  
  With my knowledge of limited javascript, I can only imagine that the variables with success a value in my first example of assigned function do not succeed to my second, I'm probably just passing through all this as a simple string (like this: + & BI_URL.) Guest/DEV/TEST/FRM_40/MM_40/MM_40.xdo?_xpf= & _xpt = 1 & P_CASE_ID = & P303_CASE_ID. & P_PERSON_ID = & _xt = MM_40_xf & P303_PERSON_ID = rtf +), but would appreciate very much all the advice.
  
  What I need to
  a. create the string of REPORT_URL differently in the table so that when it is passed to the Page element it includes the required variable data?
  b. something completely different?
  c. the forget, it is not possible!
  
  PS. I use Apex 3.2.1
  Thank you in advance.
  Sue
  
  Published by: smp245 on August 21, 2012 14:19

  Hi Sue,

  you could build the url with javascript like this:

     popupURL('&BI_URL.Guest/DEV/TEST/FRM_40/MM_40/MM_40.xdo?_xpf=&_xpt=1&P_CASE_ID=' + $v('P303_CASE_ID') + '&P_PERSON_ID=' + $v('P303_PERSON_ID') + '&_xt=MM_40_xf=rtf');
  

  the javascript $v function belongs to the Apex javascript library and gets the value of an element of HTML page.

  Kind regards
  Erik-jan

• I'm doing combat flight sim 2 work in vista, it load, works, but when it comes time to run a flight, it will appear a screen

  I would really like to find an answer to this, all keys to work orders, voice work, same intro movie, just doesn't a screen to fly on.

  Hi Doorider600,

  Welcome to Microsoft Windows Forums!

  I would like to gather more information on the subject.

  1. do you have the game runs on your computer as soon as possible?

  2. don't you make changes to your computer?

  3. have you updated the graphics driver?

  However, you can try to run the game in compatibility mode.

  To run the program in compatibility mode, follow these steps:

  1. Click on start toreduce this includes this image and then type the name of the program in the box start the search .
  2. In the list of programs , right-click on the program name and then click Properties.
  3. On the compatibility tab, click to select the checkbox run this program in compatibility mode for .
  4. In the list, select an operating system, and then click OK.

  If the program does still not work, proceed to the next method.

  Method 3: Run the program as administrator

  To run the program as an administrator, follow these steps:

  1. Click on start toreduce this includes this image and then type the name of the program in the box start the search .
  2. In the programs list, right-click the program that you want to solve and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  If the program now works correctly, the program requires administrative permissions to operate.

  http://support.Microsoft.com/kb/927386
  How to troubleshoot program compatibility issues in Windows Vista

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT

• I need the URL for the default home page so I can put it in my homepage protection, because all I get when I open the browser's "about"white."

  I'm going to hell to get just the URL for the browser/Firefox start page. I just did a recovery image factory and all I get after downloading and installing the Firefox browser a tab that says 'about white." I don't get the URL in the address bar so that I can put this URL in my homepage of protection (I use Advanced System Care ultimate). Once I get this URL and place it in the area of protection of homepage of my security software, I'll be ready to go, because I want to use Firefox as my default browser. I searched the frequently asked questions and asked the question in every way that I know, in English, and there seems to be no one there who can tell me just the URL of the start page. While I do not understand why it is so hard to get, I certainly need and would be grateful for a solution to this problem.

  It is actually called Subject: Home , but the only way to know would be if you were viewing the page and called to the top of the Page Info dialog... who, for future reference you can get using one of these methods:

  • Right click on a box empty page and select View Page Info
  • (menu bar) Tools > Page Info
  • Click on the globe or padlock icon in the address bar > more information

• With the help of functional test for load testing scripts

  Hey,.
  I'm new to this tool. Right now, I use a version 9.2 of OATS. I created a few functional scripts for Oracle E - business applications using openscript. Can I use the same scripts for my load tests. If so, how would I be able to do? When I created a load of scripts using openscript, they appear in BTA. But my functonal scripts do not appear under 'select scripts' upward section OLT.

  You will need create scripts for load tests. Functional scripts cannot be used BTA. The exceptions to this rule would be the "General" components (Code of Java Script & Web Services), which can also be used in BTA.

  for example, instead of "Testing - Oracle EBS/functional forms.
  Select "Load Testing (Protocol Automation) - Oracle EBS/forms.

  Once you get in tests that you will realize that you want to create very specific scripts and do not want to try to re-use of functional scripts to load. I know that many of these tools are "sold" to the fact that functional scripts can be reused for the load, but when it comes down to it, you'll want to design your scripts load separately anyway!

• loading file with the HTTP 404 error, according to the datasbase authentication scheme

  Hi, I am using the file browser to load the file, but has the HTTP 404 - File not found error. Of my application authentication schemes is the database (user identified by DAD)...
  
  In the page file to load, I have:
  browser of a files element called P2_FILE_NAME, region of a single report to display information from the downloaded file, the sql code is: select id, name, created_by, updated_by updated_on wwv_flow_files updated_on desc order.
  submit a button called.
  
  The problem is: if I run the page directly as APEX_PUBLIC_USER, the file is correctly loaded and displayed in the report area. However, if I go through the login page and open a session as long as user Dabase, then go to the file download page and try to load the file, it displays "the page cannot be found, HTTP 404 error.
  Any suggestion? Thank you in advance.
  
  Sue

  Sue - check with the person responsible for the implementation of your web server components.

  Scott

• 404 error when the lowest selection (column name) for the metadata 11 g dictionary

  
  Hi all

  I get a 404 error when I select a column name and click the link for dictionary of metadata. I get the 404 because obiee is allowing more 179 characters for the web link. You do not get a 404 error if you click on one of the shorter column names.

  When you select the number of offices with commands and then click the metadata dictionary button you get the error 404 below and the web address is truncated causing the 404

  This is the product link

  http / / self/analyticsRes/SampleAppLite_BI0024/SubjectArea/PRCAT_Sample_Sales_Lite80cb6a2e /.

  PRT_Calculated_Facts80cb6aa9/PRC_N_of_Offices_with_Or80cb6cfb.x

  If you type the ml at the end, you can see the Web page you want. Also if you click on the area in question and then click the dictionary of metadata and access the column from here the link works.

  
  

  

  We receive this error in our Dictionary of metadata generated, but I can also reproduce the problem with the sample app, we have placed the dictionary in the folder anlyticsRes.

  I just wanted to check to see if someone else has this problem.

  Thanks in advance!

  S. Clark

  I opened a SR and a bug has already been reported, and the solution is in the latest patch.

  Solution

  The fix for the Bug 17449036

  is included in the bundle 20124371 Patch (patch bundle 11.1.1.7.150120). See this note for more information:

  Note 1488475.1: OBIEE 11 g: required and recommended patches and Patch Sets

  There is also a one-off Patch 17449036 on top of previous patch bundle for different platforms.
  It is advisable to be in the latest patch bundle. In this case, you prefer to apply exceptional measures, you can do but
  It is not for all platforms and all the patches together.

• 404 error. I have installed but creative cloud i cann't acess to it.

  I HAVE ACCESS to MY ADOBE ACCOUNT BUT I CAN NOT OPEN THE CRETIVE CLOUD to ACESS THE PROGRAMS FEATURES, updated or OTHER. It seems square white. Not the place to put my username and password. I eat to get into my adobe account, but when I try to go to page programs it appers a 404 error. Page not available... I installed Adobe Creative Cloud thr but it does not open. Completely appears a white square, no field to introduce the ID and the password to access my apps. What can I do?  Carlos Moreira, portugal

  You are welcome!

  P.S. If you use the Adobe forums, please check useful/correct responses from the staff/helper, if there is.

• I tried to download the free 30 day trial for the Captivate 8 but it did not download.

  I clicked on the "30 day free trial" button for 8 Captivate, filled out the form, you click the button submit, but nothing is downloaded.

  
  

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  https://forums.Adobe.com/servlet/JiveServlet/showImage/2-7496573-757050/pastedImage_0.PNG

  This is an image of the files I see

  If the police will not be on the end user's computer, it won't make a difference.

  You should try to include a web font, but you cannot use those during the creation of course, so when you publish or correct fonts you have alignment issues.

• stuck on loading captivate course 8 PDF 18.5 MG

  Help! My background is stuck on the loading screen and are not content or advances with orders or OCD. It is developed in Captivate 8. It is 18.5 MG. I am tryig to display the PDF published because I want to send to my small business for review, but it does not load. It must be published in AICC/HTML5 and there is no quiz info to pass. I tried to delete all pages, several downs thin just to test it, and no work. Even just the title page does not load. I also installed an update for adobe reader and that did not help.

  Post edited by: Eva Rykrsmith

  found the problem! To view in PDF format, I need to uncheck "Enable Reporting for this project" in the Quiz settings so that it can play.

• I bought a Photoshop elements 13 DVD for my MAC, but it is not a bit of port DVD I have low load with serial number?

  I bought a DVD of 13 Photoshop elements for my MAC, but it is not a bit of port DVD I have low load with serial number?

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".