my windows vista (reboot) for 6 hours, but same screen comes to show that his research and nothing happened?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- Programs that you have problems with windows vista starts do not
- Error messages, it's that my startup repair tool going but its still looking for problems
- Recent changes were made to your computer no change, it's just stopped working suddenly and close
- What you have already tried to solve the problem I tried startup repair, but that has not worked. I've tried off DURATION and attempted to start normally and then after a while my screen goes blank.i tried the system restore, but it did not work. I AM ALSO AFRAID THAT I LOSE MY DATA, CAN U PLEASE GUIDE ME THROUGH WITHOUT LOSS OF DATA
First check to see if there are external devices attached to the computer, if so remove and check.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
See the article below for instructions on how to start your computer in a clean boot state.
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc.
If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.
To use this method, you need to restart (boot) your computer using the disk.
a. Insert the disc.
b. restart your computer using the power button on the computer.
c. If prompted, press any key to start Windows from the installation disc.
Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
d. choose your language settings, and then click Next.
e. If you are using the Windows installation disc, click on repair your computer.
f. Select the Windows installation you want to repair, and then click Next.
g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Hello
I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.
Hello
Also see also software Adobe to trial has expired at the beginning
Hope that helps!
Kind regards
Sheena
-
Windows Vista, will not let me install the software! follow-up of the steps and nothing
I tried to solve this problem for some time now with no results, I searched online and nothing. all the programs I try to install start and acts like it will install but never finished or shows me the error message. I turned to (UAC) and nothing. tried right click and run as administrator nothing. just finished installation fix the beta program and once again no result. even allow me to install the updates as vista service pack 1 or 2 and yes I do ensure that the programs are vista compatible. the knowledgeable answers would be apreciated thx in advance.
This error message you get?
The problem just started recently?You can try a system restore to what installs worked: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore
In addition, try the difficulty here: http://support.microsoft.com/mats/Program_Install_and_Uninstall
-
I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do
Hello
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you here what Service Packs, if any, are already installed.
Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
And if you have any problems:
There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
See you soon.
-
Original title: mouse bluetooyh
Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestionsHello
read these tutorials on how to set up bluetooth
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device
Here are solutions to some common problems with Bluetooth devices.
You can also try a convenience store for diagnose and fix common problems with equipment and devices running.
f the foregoing does not fix it contact the manufacturer of the device
-
Satellite A300D - 14 p Windows Vista OTB for Windows XP
Satellite A300D - 14 p Windows Vista OTB for Windows XP?
Is it possible to install Windows XP on the satellite with no complications (bad drivers and other things). I hate Vista!
I heard that some laptops require modding some files .ini to install Xp on vista.If you want to install Win XP on this laptop and want to use this OS instead of vista, then you should check out some threads here in the forum.
There are several discussions on the installation of Win XP.
Just a comment:
The Satellite A300D - 14 p belongs to the series of PSAK8E and all the XP drivers are on the European driver Toshiba page. -
I need itunes 12.3 for windows vista 32 for apple music
I need itunes 12.3 or more for windows vista 32 for music Apple
See this user of ASC. It takes you directly to a section of the old Version. You have a dated September 16, 2015 for 32-bit Windows. This is the version 12.3.0. Choose the 32-bit version. Troubleshooting problems with iTunes for Windows updates
-
WINDOWS VISTA KEY FOR INVALID COMPUTER
WINDOWS VISTA KEY FOR MY HUSBANDS COMPUTER INVALID OVER HIS COMPUTER SUFFERED FROM TECHNICAL PROBLEMS AND WAS DUE TO 3 TIMES BE REFORMATTED AND CHARGE NOW KEY DOES NOT WORK HOW TO EXPLAIN THIS TO MICROSOFT THAT DOES NOT
Here's a r eply of Keith, Microsoft support, moderator, on this subject.
Date: April 29. 2010http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/6efea9fd-70a9-4530-88c8-93fd7b2d5484If you need more tutorials...
Windows Vista Validation issues:
How to activate Windows Vista
http://support.Microsoft.com/kb/940315Activate Vista by phone:
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.htmlRequest a genuine Windows support
http://Windows.Microsoft.com/en-us/Windows/help/genuine/submit-request?displaylang=enFor the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?
I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.
-
help to get back to my original window vista theme for Windows xp
I have Windows vista on my laptop the screen appearce somehow and everything changed in the theme window xp and I can't find the option to return to the original window vista theme? How can I change my window vista theme?
Hello
1. don't you make changes on the computer before the show?
2. what exactly happens when you try to change the theme?Method 1:
Change the themehttp://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme
Method 2:
You can also run the troubleshooter and check.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero -
Microsoft Windows Vista Home Permium freezes to the logon screen or gets stuck
Microsoft Windows Vista Home Permium freezes to the logon screen or crashes on the black screen with Copyright Microsoft Corporation with the load with six green bars moving through bar. It will start in safe mode. I ran the auto repair (recommended) when starting after being forced to stop. After it says its full it restarts and remains stuck on the black screen with Copyright Microsoft Corporation with the load bar with six green bars that cross so I force disable it again.
I had no problem with this computer, he got in last seven. It was working fine yesterday and then the without wire came out, so I restarted the computer to find the connection again as I had done several times before. That's when it froze on the opening of session and password screen. Who started this cycle of freezing or stuck on the black screen with the loading bar permanently running.
UPDATE:
Start safe mode then made the instructions on the clean boot. Not checked, all iteams he says and rebooted and it worked. So I went to the next step to select only half to refine the list. Restarted and when at the loading screen for a little over 30 sec - 1 min (which is more short than the time it took to work initially after the first stage of the boot with all unchecked), but it goes to a completely black screen that has not happened before. So now, a little lost, or do I have to keep trying to refine?Hi Greg,.
It will not harm the computer to run it in a boot environment. Some programs do not work properly because they were probably responsible for their own services and rely on them to work. You have disabled all non-Microsoft services, and things like printers and software can be difficult.
Click Start, then options type power and press ENTER. Let us make sure that the system is not configured to sleep. Go ahead and put the power plan to High Performance, then click on change Plan settings below. There will be a framework for "put the computer to sleep". The value than ever.
If it continues to turn black in clean boot mode, you may have a hardware problem. One thing you could do if it's a desktop system and really need to use it now, it is the lid of the machine and aim a fan in the box. This will help if it is overheating.
Please complete the steps to diagnose the problem with the boot when you have the chance.
Brent
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
(Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)
I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.
Hello
1. what troubleshooting steps are carried out to solve the problem?
2 were there any hardware or software changes made on the computer before this problem?
Method 1:
I suggest you to return the item and check if it helps:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 2:
Check out the link and check if it works:
Windows Update error 800b0100
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100
Method 3:
I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
How to solve the problem by running the clean boot in Windows Vista:
http://support.Microsoft.com/kb/929135Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
Reference:
You can download updates manually from the link below:
http://www.Microsoft.com/downloads/en/default.aspx
It will be useful.
-
but now Hotmail does not work, I can't join because the browser will not open click on attach ways and nothing happens, I use hotmail, firefox, vista, hp. Please help me
Hello
for Firefox questions, ask in their forums:
http://support.Mozilla.com/en-us/forums
_____________________________________________________
Hotmail questions:
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions____________________________________________Welcome to Windows Live Solution Center -
I got new skins for windows media player and chose one, you click on apply skin and nothing happened! What should I do? !!
Hello
1. where did you downloaded skin?
I suggest to refer to this link and follow the steps on how to apply the skin to see if it helps.
There is a link to Microsoft to download skins, you can try to download the skins from this link and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-Media-Player-looks-using-skins
It will be useful.
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Maybe you are looking for
-
24.5.0 - deleted mail account and have problems with a new false folder
Hello I've been messing around with my Thunderbird data, so this problem is of my own making I think. I deleted an e-mail account using my provider configuration area. It was an e-mail account that I had set up initially at his accession to this prov
-
Tecra A10 Running XP - drive DVD Toshiba - missing Modules
When running a DVD Toshiba drive on these laptops we get"DVD player or the necessary modules for this app is missing." If the application restart does not resolve the problem, please reinstall the application. Yes we tried to reinstall - and Yes, we
-
Several analog inputs with different configuration differential/CSR
Hello Can anyone tell how to measure two analog inputs with different configurations using a USB-6009?I am aware of the syntax for create virtual channels for the channels DAQmx create virtual so I created two strings using Dev3 / ai0:1 but I would l
-
Hi all In my application I capture a waveform through a shunt that is in series with an engine. I enclose the signals observed on CRO and using hardware Labjack U3. I'm not able to grasp the nature, as I observe the CRO. Setting the voltage on CRO is
-
I tried to shut my computer down a lot and it hibernates or sleeps but doesn't stop do not there will be no since last Wednesday