6 more need another apple ID after reset

Similar Questions

• How to reconnect Apple Watch after reset/restore of the iPhone?

  9.3.5 ios update bricked by phone and I did a factory reset followed by a restore of backup. Not everything was restored because my Apple Watch is more matched with my iPhone.

  Is there an easy way to put back them as they were before the reset?

  See set up your Apple Watch - Apple Support.

• Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please

  Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please, help

  These can help:

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• I have an apple tv, model A1469. I can access my cable network to play in another room? Or do I need another cable box? Thank you.

  I have an apple tv model A1469. It can access what is played on my receiver in another room? Or do I need another cable box for that? Thank you.

  The AppleTV doesn't work at all with your decoder.  It is a separate system.  Thus it will not transfer from one box to the other

• I reside in the UAE UNITED from now, but in 6 months, I can move to another country, so my plan of photography 1 year will be? I need to buy only after getting a response to my request. Thank you

  I reside in the UAE UNITED from now, but in 6 months, I can move to another country, so my plan of photography 1 year will be? I need to buy only after getting a response to my request. Thank you

  Oh, one last thing, or is - it possible to buy sitting in the UNITED Arab Emirates, but giving details on the country that I will propose to (Canada) (connecting to Adobe, Canada)

  Hello

  You are fine as long as the country of your Adobe ID and country of your credit card match; and the country is one that we support for a creative cloud subscription. The fact that you are in a different country now is ok.

  Kind regards

  Sheena

• Cannot find HP printer after reset printers on Air

  I hope someone here can help or has had the same problem.

  I recently got a new printer wireless HP Envy 5660.  Everything worked find when installing, it finds the printer on the network, and he added with the scan function.  During the last part of the installation, I had battery problems and he stopped (later I realized, it didn't matter because it was for registration and other things that could be done later).

  Since I thought I had to redo the installation, I thought I would start from scratch.  I deleted the printer (who also had the function of scan displays on the screen of the Mac printer) and redone the installation.  Now after installation configurations the password on the printer wireless, it is said that the wireless settings have been saved, but could not find my printer on the network.

  I've searched the forums and I tried everything I could find:
  • Reset the printers on the MAC
  • Restore the default settings of the printer
  • Reinstall the drivers both Apple and HP
  • Restored from a Time Machine backup
  • Turn off the printer, router and computer
  • To repair the hard drive
  • Other stuff I probably forgot

  I can add the printer as an IP printer, but then I do not have the scan of the Mac function.

  I know that it worked perfectly before because when I installed it the first time it was on the Mac with printing and scanning.  To make sure that it wasn't the printer or the network, I went to another Mac and clicked on the button Add Printer printers, and wireless printer has been found on the same network and installed with the scan function.

  If anyone has any idea, please let me know because I really need the scan function.

  It could be something with the change in network or Hello after resetting the printers that does not show the previous printers in the network?

  May be corrupted printer preferences given that you have installed the drivers both Apple and HP. It is not necessary to do both.

  Open the Finder.

  In the Finder menu bar, click go > go to folder

  Now type or copy paste the following text:

  ~/Library/preferences/com. Apple.Print.Add.plist

  Click OK, and then place the com.apple.print.add.plist file in the trash.

  Restart your Mac and your printer to test.

• IPhone locked after reset options.

  I used my Iphone 16 GB 5, for one year. LETER a week I decided to present it to my mother and I reset my default settings. (I was the first user of my camera, it was purchased in the shop). IPhone write - me in your Apple ID to restore (after reset setting, first start). I fill it up but my iphone told me that this ID cannot be used to restore my iphone. And can not pass the system restore, is unable to make the Itunes backup. Someonew can help me? =(

  Hi Vlad2626,

  If your identifier Apple has been locked, take a look at the resource below to solve security problems.

  If your identifier Apple is locked

  If you or someone else enters your password, security or other wrong account information questions too many times, your Apple ID automatically locks to protect your security and you cannot connect to Apple services. You can unlock your Apple ID, after verifying your identity.

  If your identifier Apple is blocked for security reasons, you may experience one of these alerts:

  • "This identifier Apple has been disabled for security reasons".
  • "You cannot sign in because your account has been disabled for security reasons."
  • "This identifier Apple has been locked for security reasons.

  When you see one of these alerts, you can go to iforgot.apple.com to unlock your account with your existing password or reset your password. After several unsuccessful attempts to unlock your account, your identifier Apple will remain locked and you can try again the next day.

  If you use the two-step verification, you must use your recovery key and trust device. And if you use two-factor authentication, you need a trusted device or a reliable phone number to unlock your Apple ID.

  If you see a message which differs by alerts above and you can't reset your password, contact us for assistance.

  To learn more

  After changing your password, you may need to update in your iCloud settings and in all Apple services log in with your Apple ID. Learn more about Apple ID and where you can use it.

  Last modified: 10 December 2015

  Take care

• Windows Server 2012 with EFI fails to start after reset of HA

  The purpose of this thread:
  1. a solution, if anyone else has this problem.
  2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

  The scenario:

  I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

  The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

  So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
  I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

  All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.

  
  Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

  Is it possible to test or confirm without killing an ESXi host?

  I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

  Hardware version is 9, EFI boot.

  Thank you!

  Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

  This is how I fixed the corrupt WS2012 boots:

  1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
  2. choose Help and then command Promt
  3. Run diskpart
  flight type list
  Locate the number of the partition-small FAT32 EFI, in my case nr 3
  Salt type flight 3

  type assign

  flight type list

  Choose the letter assigned, in my case E:
  Type exit

  4 cd /d e:\efi\microsoft\boot

  5 ren BCD BCD.bak

  6 bcdboot c:\windows/l en-us/s E: /f ALL

  7 bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

  8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

• How can I make a phone call from Apple Watch after the update of the software lasted?

  I don't know how to make a phone call from my Apple Watch after this update. I need help

  Hello

  Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

  When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e

• Apple Watch after upgrade to watch OS 3 - flashing screen after update

  Apple Watch 42 mm

  I recently like millions out there I've updated my Apple Watch to watch OS 3. Today noon 15/09/2016, I noticed that when I raised my hand/wrist to wake up screen Apple Watch it flickered once. I did this action several times to confirm that I clearly understand what was going on. I started to solve the problem, powered off/on power the Apple Watch. Issue continues. I did a reset on the Apple Watch hold the button of the Crown and the power at the same time until the powers of the device and restart. This action eliminates the problem. Apple Watch works as expected, screen flicker stopped when hand/wrist is triggered and screen Apple Watch wakes up to the top. Unfortunately, after some time between 2 and 3 hours of new screen flickering starts. I did some digging online but have not encountered this problem. I realize that the watch OS 3 has only been published days before so I wasn't expecting to fall on part.

  My question: is this a known problem that will be patched with an upcoming release or I'm the first to report this problem? Any information would be much appreciate.

  It is too early to know if it would be regarded as a known issue. This is not the case on my Apple Watch after the update.

  See if a matching and re pairing your watch makes a difference.

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

• Everyone knows who doesn't plug apple keyboard after OS 10.11.6 updating?

  Everyone knows who doesn't plug apple keyboard after OS 10.11.6 updating?

  The extended keyboard wired USB Apple are you referring? Some users report that this case, add the stuffed short extension (if you need the extra length or not) solve the problem. I used, but only because I need the extra length and I have never had this problem.

• How to unlock an ipad after reset of the manufacturer?

  How to unlock an iPad after reset of a manufacturer.  Purchased from a third party and do not know the original owner.

  Without the previous owner Apple ID and password, the iPad doesn't help. Not even Apple can help you.

  Get your money back if you can.

• This email address is already in use with another Apple ID

  Hi, I had a problem with the evolution of my apple ID, that I had two Apple id and I wanted to use the Email address I have objective for labor and official use, the other is that my backup and everything in it, was that I created in my teens, if the Email is very unprofessional I removed my official email address of this apple ID and when I try to add in the apple ID , I use currently it is said that "' this Email address is already in use with another Apple ID" when it's actually longer, how can I swtich my official Email deal with my Apple ID? " Please help and thank you,

  I'm not sure to understand how you use your Apple ID... it seems that you want to have your communication and purchases on that 'professional' - work and personal communications, games, music, etc. on another.

  Both should be saved.

  All the data associated with an identifier Apple is always linked to this identifier to Apple.

  If you have changed your e-mail address to manage your Apple ID , you may need to Contact Apple for the Apple ID account security support

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Cannot update or install iMovie and iTunes u after reset my iPhone 6 s

  Do you receive an error message?

  Are signed with the same Apple that was used to get these apps at the start ID?

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward