Windows Server 2012 with EFI fails to start after reset of HA

Similar Questions

• Implement the deployment of Machine virtual Windows Server 2012 with a data Bit Locker encryption?

  Hi all

  Is it possible to implement the feature data Bit Locker encryption on my Virtual Machine to Windows Server 2012 Std on the Platform VMware ESXi 5.1 vSphere update 1 ?

  The hypervisor is currently running on servers HP Blade BL 460 c G8 . Read well the hardware specification: http://h18001.www1.hp.com/products/quickspecs/14208_na/14208_na.pdf I see that he has taken a TPM installed on the blade, but I don't know how to make sure that it is activated or used by the Virtual Machine?

  Any kind of help would be greatly appreciated.

  Thanks in advance

  I had a few goes at it and it's not like you can virtualize a TPM. It would make sense if it was the case - the secure TPM was not designed to manage multiple instances of the OS.

  I ended up making USB passthrough on a USB stick and have the Bitlocker key stored on this stick as a demo. Certainly not a transaction supported, but it showed that the storage of key seems to be the only issue.

• EMC XtremIO Gen2 table, vSphere 5.5 and Windows Server 2012 R2 EFI

  We spin the new array of XtremIO Gen2 a POC of EMC and discovered a problem with customers running Windows Server R2 2012 or the EFI firmware. The details are in the blog below, but the goal here is to ask for the community of entry of anyone else running on XtremIO with firmware Win2k12 R2 and non - R2 and EFI/BIOS. EMC support is also working on this subject, so I can finish to post my reply here. Nevertheless, community information XtremIO is so limited (because of his November GA), I hope that this will make a difference.

  Blog/details: XtremIO Gen2 EMC and VMware: bcTechNet

  Environment:

  Dell PowerEdge R810/R820 hosts

  QLogic CNAs 8262 (5, 5-compatible firmware/drivers)

  Switches-Cisco Nexus 5548UP

  FCoE to guests; CF storage

  3Par T400 source of storage (FC 4 GB/s)

  Target storage XtremIO Gen2 (8 Gbps FC)

  VMware vSphere, ESXi 5.5 Build 1331820

  The Windows Server 2008 R2 (BIOS), 2012 (BIOS) clients and 2012 R2 (EFI)

  Storage 3PAR - no problem with all the guests

  XtremIO storage - can not (re) start guests R2 EFI 2012

  After a few weeks of troubleshooting by engineers from VMware and EMC/XtremIO, the question was determined to be a problem starting EFI replace a block of 7 MB in the XtremIO table, which filled the queue, and who would never clear that he expected more data to complete the communication (i.e. deadlock). This seems to happen only with firmware of EFI VMs (tested with 2012 Windows and Windows 2012 R2) and the question is on the end of XtremIO.

  The good news is that the problem can be mitigated by adjusting the Disk.DiskMaxIOSize parameter on each ESXi host by default 32 MB 32768-4 MB (4096). You can find it in vCenter > Home > Configuration > advanced settings (from the bottom) > drive > Disk.DiskMaxIOSize. The XtremIO team is working on a permanent fix in the meantime, and the workaround can be implemented hot with no impact on ongoing operations (potentially minor host CPU load increase as ESXi breaks > 4 MB e/s in MB 4 pieces).

  The rest of the ventilation on the latency, small block IO, etc. can be read here: XtremIO EMC and VMware EFI | bcTechNet

  Thank you, Darius, and EMC/XtremIO team.

  -Chris

• vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

  Hello!

  We have a server windows 2012 R2 with MSSQL server 2014.

  The client software uses the jdbc for database connection. If customers make a query which collects a massive amount of data the whole thing slowed down after a while.

  Then, his need to wait 10-20 minutes to speed up again. I have tested and tried everything.

  -measure the ethernet parameters

  -replace the cables by cat7

  -installed a virtual machine with the windows client and the real customer use the virtual environment via rdp

  -activated the RSS in the vmxnet3 advanced settings and windows

  -the mode SplitRx in vcenter vm settings and disabled ethernet Coalescent too

  -set the VM to high latency

  -tried to migrate the virtual machine to another host

  Not for their help. If a massive sql query is run first its great, then the need for a second or more to check a single record.

  checked the vm cpu stress but its less than 5% all the time. Checked the network with wireshark, there are a lot of small packets but nothing big. The bandwidth used is still low.

  When its idle delay after two packets will increase from a few ms to 400-500 ms.

  Our most powerful server is an HP DL380 G9 with two octa core Xeon processor 384 GB of ram, full SSD datastore. Its a lightning fast host.

  The virtual machine have 8 core cpu and 64 GB of ram.

  No matter where am I up the virtual machine or how many resources provide the custom aisle question.

  The strange thing is when customers slowed down I can copy large files between the client and the server with fast speed, so the slow sql.

  I can solved this question if I use the ethernet E1000 instead of the VMXNET3 adapter, but E1000 have much more load and the server need to transfer big files too, not only the sql service.

  Vmxnet3 much faster and have less overhead, but this question of sql, I have a problem with that. So I go back to the E1000 for now. Its slower eat more cpu but the sql connections works very well without any problems.

  Can someone tell me what I can try harder to identify the vmxnet3 problem? I really need it to improve network performance and lower overhead, but the rapid sql is the top priority.

  Thank you!!!

  We had exactly the same problem on our SQL servers once upgraded to Vsphere6.This is due to Receive Segment coalescence feature in new VMXNET3-nics on Win 2012.

  More details here: http://nickmarshall.com.au/blog/2015/7/24/vsphere-6-hardware-version-11

  The best way to solve this problem is to turn it off completely in the server operating system (in the admin command prompt):

  netsh int tcp set global rsc = disabled

  
  

  Check with:

  
  

  netsh int tcp show global

  It's fast and easy without downtime or disruptions and involves no change types of nic.

  After doing this on all our SQL and application servers, everything was ok.

  
  

  
  

• Windows Vista 32-bit is failing to start after the success of the recovery.

  Hi all, my apologies if this has already been covered in another post, I checked but I'm new here so might have forgotten.

  I have a HP Pavilion a6442a with Windows Vista 32-bit. A couple of weeks it froze, forcing me to maually shut down, and now it does not restart. It gets so far then goes to startup repair, which never seems to find no problem. I tried restoring the system (to several different restore points), conducted diagnostic tests, conducted tests of memory and hd and tried commissioning in all modes as I could: no problem can't find anywhere and I always had the same problem. Finally, I backed up my files and made a full recovery of the system. It said it completed successfully, I restarted to complete the installation of Windows, it gets "Please wait a moment while Windows starts for the first time... "freezes, restarts and then traced directly back to the start screen for repair.

  I am at a loss, I've done everything I can think. Does anyone have any suggestions?

  Hello:

  Have you added any hardware configuration inventory (other than replace the hard disk or add memory)?

  Do you have only the mouse, keyboard and screen plugged in when you ran the recovery procedure?

  If the answer to question 1, remove any material that you have installed that do not come with the PC and try to recover again.

  If the PC is recovering successfully, close and reinstall your spare hardware.

  If not, question 2, unplug anything other than the mouse, the keyboard and the monitor and try to recover again.

  If you continue to be confused and you can read all 25 characters of the product key of Vista on your PC case, you can make your own Vista installation media.

  It will be just a simple installation of Vista and no software other than the operating system will be included.

  You can install the drivers and software available to support for your PC and driver page.

  Link to the info below... click on the blue link of the reinstallation of Windows Guide PDF and start reading the news of Vista that starts on page 296.

  http://philipyip.WordPress.com/Dell-community-forums/

• Printer does not immediately appear under device & printers on Windows Server 2012 R2 VM. Printers appears after 15-20 min or more.

  Hi team,

  I have a question where adding a network printer is successful. I can see the printer in the Device Manager and I can print as well. However, it does not immediately appear under devices and printers and takes a long time to appear. Can someone help me please as soon as possible?

  Thank you

  Anand N V

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• PowerEdge 1850 - installation of Windows Server 2012

  Hi guys, I have a Poweredge 1850 which I brought cheap on ebay, I use it as a NAS abit to free up space on my iMac and stream movies/music to my computer or via DLNA to my TV and PS3.  I am currently running Ubuntu that I kind of like/dislike, I also like to use my server as abit of a toy game project, and I like to try things, like using a webcam as a security camera which I can access when im etc.  I also use it to connect via ftp to and run Web etc pages.

  Now you know how I like to play with my server please can you help me :(  I want to try a new OS, I don't fear wipeing and start again as I can save on an external HARD drive.  I have a copy of Windows Server 2012 with I think that 30 days free and if I like it will activate.  When I boot from the CD, I get to the bit where it asks an installation location, but I can not find disks for select, I know I probably install the drivers I've tried (whether they are good or not, I don't know) my problem is they are .exe I can't load it as im on my mac:(-je n'avais pas ce problème de localisation deles de lecteurs quand j'ai installé Ubuntu) who find them without problem.

  Is it also possible to do this via VNC, I use remote on my server as I placed it in my garage.  Its abit of an effort to bring it inside more, she is rather noisy.

  A quick, someone could go through how to configure my drives in the bios, because I don't want to use RAID, I rather just have them as two discs rather than with her backup to another.

  Would be very grateful if you could help me with my "little" project (maybe we could both remote in and talk via Skype and do it together: D)

  Kind regards

  PriestyUK

  Yes, 2012 needs pilots, and the only way to get out them of the EXE is to run the EXE to extract the content (or use another tool for extraction).

  If you don't have a Windows machine (or you are not able to do it in a box of Linux/Mac), is not a virtual Windows machine that you can extract it, AND you have access to Server 2008 (not R2), then you can install it with this long enough to get the extracted driver, as pilots PERC 4 are from 2008 (but not later).

  Because Dell can't 2012 on 8G servers, you will need to use the drivers for Server 2008 R2:
  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/Poweredge-1850?driverId=9K3D3&osCode=WS8R2&FILEID=2731109791 (you need the 'hard drive' version)

  The RAID controller integrated to 1850 (PERC 4e/Si) does NOT support so no RAID, in order to use the disks individually, you must configure each disk in a single drive RAID 0.  An alternative would be to disable RAID entirely, that uses only the onboard SCSI controller.  The RAID cache will be more usable with RAID disabled well.

  You configure RAID in the CTRL-M (during POST) utility.  You disable RAID in BIOS (F2), in respect of the integrated devices (CTRL-M will not be accessible when disabled - you use CTRL-A to display the disks).

• Windows could not update the Configuration to start the computer. Windows Server 2012

  I am trying to install Windows Server 2012. When installing, I get the message could not Windows Update to the Configuration to start the computer. Installation cannot continue. He cancel the installation. Can someone help me with my problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Installation of Weblogic 10.3.6 with generic Setup on the SP2 of Windows Server 2012

  Hello Experts,

  I try to install WLS10.3.6 on MS Windows Server 2012 (64-bit) SP2 with generic Setup.

  1 installed jdk1.7 (jdk-7u80-windows - x 64)

  2. then ran wls1036_generic.jar

  C:\Program Files\Java\jdk1.7.0_80\bin > java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  Cannot create the temporary extraction directory in the default location.

  , I get the above error message. Attaching screenshot. http://www.use.com/FpC0P

  Can you please help?

  Thank you

  Benoit

  Just to update, finally ran wls1036_generic.jar. Problem was probably related to the virtual machine.

  We were in-

  C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  Error - a

  Cannot create the temporary extraction directory in the default location.

  The temporary extraction directory is the Windows temporary folder. The location is-

  Folder - %USERPROFILE%\AppData\Local\Temp where %UserProfile% - c\:users\ [acctname]

  But when you run start > run > %Temp%, I see.

  C:\Users\ccbgso\AppData\Local\Temp\2--et error was a drive is not accessible.

  And \2 was the problem, because there is not C:\Users\ccbgso\AppData\Local\Temp\2.

  To correct this error, we did it-

  Start > run > Regedit > hkey_current_user > volatile environment

  And found 2 below.

  Chosen the 2, then the two TEMP & TMP sought in the right pane.

  the values were - C:\Users\ccbgso\AppData\Local\Temp\2

  Right-click each & click on modify, remove the \2

  Clicekd on ok.

  Disconnected and re connected.

  And then ran

  C:\Java\jdk1.7.0_80\bin>Java-D64-jar D:\SW_Installers\06.Weblogic\wls1036_generic\wls1036_generic.jar

  This time, he began the extraction and 'Install Oracle - Weblogic 10.3.6.0' Welcome screen appears.

  Thank you best regards &,.

  Benoit

• Windows Server 2012 stuck at startup when running on top of KVM with active regrouping of CPU

  Hi all

  We observe an interesting problem when running Windows Server 2012 on top of KVM to multiple processors.

  When the collection of the CPU is disabled, Windows starts and works very well.

  When the grouping of CPU is activated by:

  bcdedit /groupaware on
  bcdedit /groupsize 2

  Windows hangs at startup while displaying a black screen with logo and won round progress indicator.

  We have produced the crash dump by injection of interruption NMI via QEMU/KVM debugging facilities, the look of stacks of appeal as follows:

  0: kd > ~ 0
  0: kd > kv
  Child-SP RetAddr: Args to child: call Site
  ' fffff803 ' 95645 c 08 fffff803 ' 941828de: 00000000'00000080 00000000' 004f4454 00000000'00000000 00000000'00000000: nt! KeBugCheckEx
  ' fffff803 ' 95645 c 10 fffff803 ' 93b66c09: 00000001' fffff803 00000000 ' 94196030 00000000 00000000' fffffa80' 05654968: hal! HalBugCheckSystem + 0x9a
  ' fffff803 ' 95645 c 50 fffff803' 94183204: 00000000 ' 000006 c 0 fffff803 ' 95645e30 fffff803 93 d 03100 fffff803'94196030: nt! WheaReportHwError + 0 x 249
  fffff803 '95645cb0 fffff803' 93be17a7: fffff803 '95645e70 00000000'00000010 00000000'80000005 fffff803' 93a2227d: hal! HalHandleNMI + 0 x 150
  fffff803 '95645ce0 fffff803' 93a84d02: 00000000' 32f7fc10 fffff803'95645ef0 00000000 00000000' fffff803 93 d 03180: nt! : FNODOBFM: 'string' + 0x13d6d
  ' fffff803 ' 95645 30 fffff803 d ' 93a84b73: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KxNmiInterrupt + 0 x 82
  ' fffff803 '95645e70 fffff803' 93abb0cb: 00000000 ' 00000000 fffff880 ' 0315efb8 00000000'00001000 00000000'00000000: nt! KiNmiInterrupt + 0 x 173 (TrapFrame @ fffff803'95645e70)
  fffff880 '0315eab0 fffff803' 93b0191b: 00000000'00000000 00000000'00000000 fffff880 '0315f200 fffff803' b 9417, 291: nt! KeFlushMultipleRangeTb + 0x3c0
  fffff880 '0315ecb0 fffff880' 01709b 45: fffffa80 '018a 7040 00000000' 0f0049ed fffff880' 0315f200 00000000' 00000000: nt! MmSetAddressRangeModified + 0x14b
  fffff880 '0315edb0 fffff880' 0170a 471: fffff8a0 '00ba0010 00000000' 0f004b81 00000000'00000001 00000000'00000500: Ntfs! LfsFlushLfcb + 0xa55
  fffff880 '0315efc0 fffff803' 93ac8df5: fffff880'0315f160 fffffa80 '0187a6a8 00000000 00000000' fffffa80' 05621b 80: Ntfs! LfsFlushLfcbCallout + 0 x 25
  fffff880 '0315eff0 fffff803' 93ac9d85: fffff880 '0170a44c fffff880' 0315f160 00000000 00000000' fffff803 93 d 03180: nt! KeExpandKernelStackAndCalloutInternal + 0xe5
  "fffff880 '0315f0f0 fffff880' 0170 has 434: 00000000'0000000 fffff803 ' 93 d d 03180 fffff803 93 d 03180 fffffa80 ' 018a 7040: nt! KeExpandKernelStackAndCalloutEx + 0 x 25
  "fffff880 '0315f130 fffff880' 017cbe9b: 00000000 ' fffff8a0 00000000 '00ba0010 fffff880' 0315f200 fffff8a0 ' 00b 18901: Ntfs! LfsFlushLfcbOnNewStack + 0 x 50
  fffff880 '0315f190 fffff880' 017c8f75: fffff8a0 '00ba0010 00000000' 0f004b81 fffff880 '0315f480 fffff8a0' 00b 18950: Ntfs! LfsFlushToLsnPriv + 0x13f
  fffff880 '0315f230 fffff880' 017c851f: fffff8a0 '00ba0010 fffff8a0' 00ba0010 fffffa80'057 c 2480 00000000'00000062: Ntfs! LfsWriteLfsRestart + 0 x 145
  fffff880'0315f290 fffff880'017 c 6083: fffff8a0'00b98c10 fffff880 '00000070 fffff880' 00002102 00000000 00000000': Ntfs! LfsWriteRestartArea + 0x15f
  "fffff880'0315f3d0 fffff880'017 c 9889: 00000000 ' 00000000 fffff880 ' 0315fa90 00000000'00000000 00000000'00000000: Ntfs! NtfsCheckpointVolume + 0x6f3
  fffff880 '0315f920 fffff880' 017c57eb: fffff880 '0315fa90 fffff880' 0315fa90 fffffa80'057 c 2188 00000000 00000000': Ntfs! NtfsCheckpointAllVolumesWorker + 0x61
  "fffff880 '0315f970 fffff880' 017c954c: fffff880'0315fa90 00000000 00000000' fffff880 ' 017 c 9828 fffff880 ' 0315fa40: Ntfs! NtfsForEachVcb + 0x1bb
  fffff880 '0315fa10 fffff803' 93ac0391: fffffa80 '018-7040 fffff880' 0175d6d8 fffff803 93 c 91080 fffff803 93 c 91000: Ntfs! NtfsCheckpointAllVolumes + 0x12c
  fffff880 '0315fcc0 fffff803' 93a2f521: 00000000'00000000 00000000'00000080 fffff803 '93ac0250 fffffa80' 018a 7040: nt! ExpWorkerThread + 0 x 142
  fffff880 '0315fd50 fffff803' 93a6ddd6: fffff803 93 d 03180 fffffa80 '018-7040 fffffa80' 018bd040 fffffa80'01897040: nt! PspSystemThreadStartup + 0 x 59
  "fffff880'0315fda0 00000000' 00000000: fffff880 ' 03160000 fffff880 ' 0315a 000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16
  0: kd > ~ 1
  1: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '031ce940 fffff803' 93a5319b: 00000000 00000000' fffff880'04171000 00000000 '80000002 00000000' 00000001: nt! KiIpiSendRequestEx + 0 x 166
  fffff880 '031ce990 fffff803' 93a4d364: 00000000'00000040 00000000'00000040 fffff880 '031cebb0 ffffffff' ffffffff: nt! KeFlushSingleTb + 0x11b
  "fffff880 '031ceab0 fffff803' 93a4e9fc: 00000000 fffffa80'20000000'd 250 0178 00000000' 0007d9b7 2aaaaaaa ' aaaaaaab: nt! MiStealPage + 0 x 914
  fffff880 '031cee60 fffff803' 93a4ff87: 00000000' ffffffff 00000000' 0007d9b8 00000000'00000103 20000000' fffff803: nt! MiClaimPhysicalRun + 0x1fc
  fffff880 '031ceee0 fffff803' 93e8ea59: fffff880 '031cf2e9 00000000 00000005' fffff880' 0198f000 fffff8a0'00015470: nt! MiFindContiguousPages + 0 x 337
  fffff880 '031cf030 fffff803' 93e8f0ec: 00000000' 7d9b8963 00000000' 0007d9b8 00000000 00000000' fffff8a0'00003000: nt! MiAllocateDriverPage + 0 x 49
  fffff880 '031cf0a0 fffff803' 93e9eafb: 00000000 00000000' fffff880 '031cf2e9 00000000 00000000' fffff6fc' 4000cc78: nt! MiLoadImageSection + 0x23c
  fffff880 '031cf230 fffff803' 93e9f43e: fffff880'031cf390 00000000'00000000 00000000'00000001 00000000'00000000: nt! MmLoadSystemImage + 0x1c3
  fffff880 '031cf340 fffff803' 93e9979c: fffff880 00000000'00000000 00000000'00000000 ' 031cf860 00000000'00000003: nt! IopLoadDriver + 0x2ca
  fffff880 '031cf610 fffff803' 93e97fb6: fffff8a0 '00d04e00 fffff880' 0097b 340 00000000'00000000 00000000'00000000: nt! PipCallDriverAddDeviceQueryRoutine + 0x22c
  fffff880 '031cf730 fffff803' 93e95bc0: 00000000 00000000' fffff880'00000002 00000000 '00000000 00000000' 000007ff: nt! PnpCallDriverQueryServiceHelper + 0x13e
  "fffff880 '031cf7b0 fffff803' 93e9611e: fffffa80 ' 01892010 fffff880 ' 031cfa40 fffffa80 ' 01887670 fffffa80'd 018 4700: nt! PipCallDriverAddDevice + 0x400
  fffff880 '031cf940 fffff803' 93f09c07: fffff803 '93a 91700 00000000'00000001 00000000'00000000 fffff803' 93d90a52: nt! PipProcessDevNodeTree + 0x1ca
  fffff880 '031cfbc0 fffff803' 93b1381f: fffff803 00000001'00000003 00000000'00000000 ' 93ce06e0 00000000' 00000000: nt! PiProcessStartSystemDevices + 0 x 87
  fffff880 '031cfc10 fffff803' 93ac0391: fffffa80 ' 01898040 fffff803 '93b134bc fffff803' 93ce06e0 fffffa80' 0189 c 600: nt! PnpDeviceActionWorker + 0 x 363
  fffff880 '031cfcc0 fffff803' 93a2f521: 00000000'00000000 00000000'00000080 fffff803'93ac0250 fffffa80'01898040: nt! ExpWorkerThread + 0 x 142
  fffff880 '031cfd50 fffff803' 93a6ddd6: fffff880 ' 02a 15180 fffffa80 ' 01898040 fffffa80'd 0188 040 fffffa80' 01897040: nt! PspSystemThreadStartup + 0 x 59
  "fffff880'031cfda0 00000000' 00000000: fffff880 ' 031 d 0000 fffff880 ' 031ca 000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16
  7: kd > ~ 2
  2: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '02aafa08 fffff803' 93b4e12a: fffff880 '00000006 fffff880' 00000003 fffff880 '02-92140 fffff803' 93b4e9e4: hal! HalProcessorIdle + 0xf
  fffff880 '02aafa10 fffff803' 93ab69a0: fffff880 '02a8b5c8 00000000' 05f5e100 00000000'00000000 00000000'00000000: nt! PpmIdleDefaultExecute + 0xa
  fffff880 '02aafa40 fffff803' 93ab53c0: 00000000 00000000' 0000040c 0000040'c fffff880 '02aafca8 fffff880' 02aafcb0: nt! PpmIdleExecuteTransition + 0x47f
  fffff880 '02aafc60 fffff803' 93ab354c: fffff880'02 has 86180 fffff880 '02a 86180 00000000 00000000' fffff880' 02a 92140: nt! PoIdle + 0x1e0
  fffff880'02aafda0 00000000' 00000000: fffff880 '02ab0000 fffff880' 02aaa000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c
  2: kd > ~ 3

  There are always two or more CPUs stuck in KeFlush...() functions dealing with IPIs. 
  
  The problem looks like interrupt loss during IPI-ALL-BUT-SELF dispatching, we tried to track possible problems in KVM code that may lead to an issue like this but found nothing so far.The issue looks even more interesting taking into consideration that as far as we know CPU grouping is SW-only feature that doesn't have real effect on hardware.We will be grateful for any idea that could help to resolve the problem.Thanks in advance!P.S. Kernel crash dump is available at https://www.dropbox.com/s/07qb6wz9nacwhxn/MEMORY.DMP.zip?dl=0
  

  KV

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

  If you pt a link here I want a few resources for the thread on TN

• PowerEdge 2850 Windows Server 2012 do not start

  Well, I have a PE 2850 that was loaded to the top with Windows Server 2012 at the beginning of the year last as part of our upgrade to Windows 7. Even though I know that Windows Server 2008 is the latest version of Microsoft to officially support the SCSI interfaces as RAID PERC 4E/DI included in the 2850 card, I was able to work around in first install 64-bit Server 2008 with the SCSI drivers and then doing an upgrade online to the 2012 server.

  Everything went fine for the last year and half, but when I got to work yesterday, the server had crashed and he was sitting on the screen of the BIOS with the following error message:

  Memory/battery problems were detected. The adapter has recovered, but cached data have been lost. Press a key to continue.

  I pressed on enter and the server started to move to a preparation repair screen Windows where the progress bar is not long about 80% of the way and then froze for more than an hour. Subsequent attempts to restart in safe mode led to the server of freezing for several minutes before restarting once more to this same error message at the Windows logo screen. I can pull up to the management of the RAID and see my partitions still there, and I even loaded my readers in an old PE 2600 to check consistency on the logical drives (no problem found). However, the old 2600 is 32-bit architecture and it won't try to boot into the operating system.

  At this point, I'm really just trying to get a full backup of my system. I don't mind getting a new server, but I don't want to keep throwing money at this old piece of 12 year of equipment without knowing if it works or not. The problem is that 2012 uses ReFS, and none of the recovery programs I found can access my logical volumes. Boot from the OS Installation disk in the recovery console doesn't work, because the OS disk does not include SCSI drivers native to be able to see the score of the OS or the data partition.

  I think I'll call a few services data recovery tomorrow, but I would check here for ideas first. Any input is greatly appreciated.

  Microsoft has removed native SCSI support with 2008 R2, but R2 2008 provided Dell drivers for the PERC. These drivers work for the installation of Server 2012 as well.

  Memory/battery message: all stop and order the memory of replacement for the controller RAID, 4D554 part number. Nothing related to the operating system won't work (installation, repair, etc.) until you do. This question is very specific to the PERC 4e/Di on the 28 x 0.

  The 2850 is not 12 years. First of all, he started 10 years ago to shipping.

• ProLiant DL320e with Windows Server 2012 Bluescreen

  Hello

  I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".

  I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
  
  I found some knowledge which mentions screens blue and with the driver for Smart Array
  http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
  But the update and version numbers do not match.

  Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.

  I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.

  The servers are offline on a clients site in a restricted environment so that they lack updates online.
  
  During this time, I downloaded the SPP Service Pack for Windows Server
  FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
  
  Does anyone have pointers?

  Take care

  Martin

  Thank you, I have not found this forum. If an admin could move it which would be best.

  Just in case anyone else has this problem is this question:

  I contacted HP by telephone support and the solution is:

  Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Take care

  Martin

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Transformation of MSXML fails in Windows Server 2012 for adults

  I am transforming xml using the transformNodeToObject below method using VB Script:

  Dim oData
  Set oData = createobject ("MSXML2. DOMDocument.6.0")
  With oData
  . Async = False
  In the opposite case. LoadXML (DataNode) then alert "could not load DataNode.  "&. parseError.reason
  Ends with

  OTMPC Dim
  The value of OTMPC = createobject ("MSXML2.") DOMDocument.6.0")

  oData.transformNodeToObject style, the OTMPC

  I get the error in Windows Server 2012below.

  -2147024882 is not enough storage is available to complete this operation.

  This error occurs only in Windows Server 2012. The above code works fine with Windows 7 (MSXML). I noticed the name of the product of msxml6.dll in Windows 7 is MSXML 6.0 SP3 and Microsoft XML Core Services in Windows Server 2012. Also I noticed the Task Manager, it took more memory in Windows Server 2012.

  The above code works fine in all lower versions of the operating system except Windows Server 2012. Please give the solution for this.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Upgrade Windows Server 2012 Std to 2012 Std R2 with the same license

  I have an activation key for windows server 2012 Std, can I upgrade windows server 2012-2012 Std R2 with this key? Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum