6000 Inspiroron hard drive adapter

Similar Questions

• Portege S100 Ultra Slim Bay HARD drive adapter take 2.5 HDD?

  As the title says really, think to add a second hard drive to my portege s100, but not sure if the Ultra Slim Bay adapter HARD disk can take normal 2.5 "HDD, or just the special Ultra Slim Bay HARD drive.
  Thank you
  Danh

  Hello

  First of all, you need to use the HARD drive adapter selectable right Bay which is compatible with the Portege S100.

  I found an and it seems that the HARD drive adapter Bay selectable PA3408U-1ETC is the right!
  Case Interface is serial ATA (SATA). And the Serial - ATA 80GB HDD Kit PA3407U - 1 H 80 must be compatible with the select Bay case

  Maybe you will take a peek here:
  Portege S100 details Options & accessories

• HARD drive adapter vs autonomy...?

  Hi guys,.

  Forgive me if my question have been discussed before, impossible to find all threads...

  I think with the purchase of the HARD drive adapter for my T410 so that I can place a 2nd HDD optical drive, thought to 1 TB. My question is, how much battery life will be affected if I go that direction?

  All input will be greatly appreciated

  Omar

  Generally, it will be as much as relugar HARD drive inside. Usually going to have impact on battery life 30-60 minutes-depending on the use of the HARD disc.

  7200 RPM hard drives drain more and are often noisier and definitelly get a little hotter than 5400 prm. So I would suggest with 5400 RPM HARD drive.

• AIO HP 6000 Pro: hard drive HP 6000 AIO Upgrade questions

  I have a HP 6000 Pro AIO, which works fine, but I would like to put a hard drive more in for right now, I have a 250 GB drive.  I have a WD Black 1 TB disk into the machine, but it will not recognize the drive even after that the drive is cloned.  He tells me that readers may not be found.  When I check the disc, it displays the data that I cloned it.  Is their missing something I'm trying to migrate to the new drive?  Also, I tried to do a fresh install of the operating system.

  Hello:

  Your PC can suffer from this problem if you installed a hard drive sata III...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3718645 & docid = emr_na-c02711513 & lang = to & CC = US

  I had a similar problem with my dc7800 CMT.

  I bought a WD Caviar Black 1 TB SATA III hard drive.  I managed to install the operating system, but when I want to start or restart the PC, most of the time (95%), I got the boot drive not found error.

  I assumed the reader was bad, so I RMA. by it, and the spare drive did the same thing.

  I have a HP 8200 CMT of Elite, which came with a Seagate 1 TB SATA III hard drive.

  For fun, I put this in my dc7800, and it worked very well.  He worked in this machine for over 3 years now without a hitch.

  I put the WD hard drive in my 8200 Elite and it has worked well in this PC, because there a sata III drive controller.

  None of our PC are shown in this document support, but the symptoms are the same.

• Tecra M5: Need for a Slim Select Bay HARD drive adapter

  I bought the Tecra M5 last week and I'm very happy with it, but I also bought the disc adapter HARD Slim SelectBay (number PA3134U-2CTE)
  I already have a hard drive to go inside, but upon arrival, I found that they are not compatible, and I need a caddy / adapter plate so that it all works!

  Anyone have any ideas on a market after copy?
  I spent the last 4 hours of the day on the phone with various departments within Toshiba and suppliers, of which none seem to be able to help. I'm going to spend 280 on a 100 GB HARD drive, when a 120 gig on his own is only 120, I think 160 for the plate of the evasive / caddy is too expensive!

  Cheers in anticipation.

  Nick

  Hello

  I found information on the net that the adapter Slim Select Bay drive HARD PA3134U-2CTE is a really good part, and I imagine that you must now only a compatible HARD drive.
  The drive HARD and any other compatible parts, you can order from the Toshiba service partner in your country.

  Check this page for the basic options for Tecra M5:
  http://EU.computers.Toshiba-Europe.com/contents/Toshiba_teg/EU/others/brochures/TecraM5_DataS_0306.PDF

• Mini HARD drive adapter

  I need an adapter ide for a mini hard drive such as mk4004gah to connect to a pc to transfer data office

  see you soon

  Brian

  Hi Brian

  You need a google around and I'm sure you can find one for you. Please visit this site http://www.addonics.com/products/Saturn/aesed.asp it is described as optional kit 2.5 "converter can be used for the 2.5" or 1.8 "IDE HDD.

  I use 2.5 "external HARD drive, but I never tried with 1.8 HDD".

  Good bye

• Need info on the HARD drive adapter and utility installation Vista on Equium A110

  I am the owner of a satellite A110 - 233 (PSAB2E), and I've recently upgraded to Vista after installing 2 GB of RAM. However, I was somewhat short space hard disk and I dealt with a new 120 GB HARD drive. However, it seems that the computer has an interface of edge, like the current Hitachi TravelStar HARD drive connector - it's not like there's a plug of the adapter on the disk. Anyone know where I can get an adapter for my hard drive of 40 pins 'traditional '?

  After I installed Vista and flashing my BIOS, I have ConfigFree reiinstalled and value added package (among other pilots). However, running ConfigFree always leads to a crash with the ID of BSOD "NO_MORE_IRC_STACK_LOCATIONS."
  In regards to the PPV, I mainly wanted it for energy savings. However, searching for him gives only 'Power Saver help'.

  Can someone give me guidance here? Thank you.

  Hello

  Did you know that you have a disk serial - ata of your machine which is not compatible with the standard IDE (40 pins)? You won´t get a spindle adapter 40 to serial ATA, SATA is a completely different technology to the IDE.
  You will need to return the drive, you bought and buy a disc serial - ata, that will fit your machine.

  A small idea on my side about your BSOD:

  Download the powersaver and the configfree for vista on the internet (it is a good address: http://209.167.114.38/support/Download/ln_byModel.asp) and reistall that stuff, maybe it helps.

  Welcome them

• HP Pavilion slimline 400-314: work which hard drive to my hard drive adapter

  "My old HP Pavilion slimline computer s5123w turns to March 2015, there a drive hard internal Barracuda 3.5 ST3500641AS-RK can I use a Vantac 2.5"/3.5"/5.25" SATA/IDE to USB 2.0 adapt - CB-ISATAU2 model for hard drive Barracuda to transfer the Outlook2003 to my new computer a HP Pavilion Slimline 400-314

  Thanks Scott

  Hello

  You can find them (May marks) of any good computer store.

  http://www.vantecusa.com/en/product/view_detail/416

  Kind regards.

• DV7-6195us, a 15mm high hard drive adapt?

  I have a laptop DV7-6195us.

  I want to upgrade the hard drive in the drive Bay Second to a Western Digital WD20NPVT, 2 TB hard drive. This drive is 15mm high. My current drives are 9.5 mm in Bay 1, 12.5 mm in bay 2.

  The larger hard drive will fit inside the bay, with or without secondary hard drive bay changing? If the change is necessary, what is involved for the mod?

  Thank you.

  Dave

  Dave1290,

  Here are the specifications of your HP Pavilion dv7-6195us Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the "maintenance and Service Guide", Page 6 - Chapter 1 - "Product Description", only the following drive formats are supported;

  Hard drives - Supports 6.35 - cm (2.5 in.) 12.7 mm hard drives (.50in), 9.5 mm (. 37-in) and 7.0 mm (. 28 - in.) thick

  According to the information above, the answer is that a 15mm disc does not fit into your computer. Change can allow the reader to adapt, but could compomise the drive and/or computer. I wouldn't recommend any change to this effect.

  Please send Bravo

• Where can I find an another hard drive adapter?

  Original title: adapter hard disk?

  When I replaced my hard drive on my laptop, my torn hardrive adapter so I could find another adapter hard disk like Wal-Mart or best buy?

  It is unlikely that any local/repair depot/jobber provider has a part on the spot. They might be able and willing to order one for you. According to the manufacturer, it may be available through their web site. Sometimes, it takes a lot to dig through menus and searches to find the ads.

  For example

  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-46474

  Tom Ferguson

• W520 Ultrabay second hard drive adapter

  Hello

  I just bought a W520 and I would had an SSD.

  The idea is to remove the current HARD drive, place a SSD in place, remove the optical drive Ultra Bay and place the (deleted) HARD drive. I would like to know if I should order an adapter to connect the HARD drive in the Bay of the Ultra.

  I found this: http://shop.lenovo.com/SEUILibrary/controller/e/frweb/LenovoPortal/fr_FR/catalog.workflow:item.detai...

  I called Lenovo French support center but they say clearly.

  Thanks for your time.

  Hello BGI:

  Personally, I don't think it's a problem that the UltraBay tape for the hard drive is shorter than 3 mm slot.  My guess (strictly a guess), it's that there are other models of laptops Lenovo out there who cannot accept a high 9 mm UltraBay object and makes Lenovo a deliberate choice to ensure that the UltraBay tapes would fit into all different machines - rather than having a second version that only fit in series W520.

  The tape drive does not come with the computer (the computer comes with a CD/DVD player, except if you have ordered a RAID instead).  The tape drive is an option that must be controlled.  I ordered mine as I placed the order for the computer.

  Michael

• Hard drive adapter 5,25 inches

  I have a HP e9280t.  It comes from the factory with two hard drives and a DVD.  I would like to add a third hard drive.  It sounds simple enough, but obviously, it will go in the single Bay empty 5.25 ".  I need to find an adapter for 3.5 "hard drives that are compatible with the Bay 5.25" without tool.  I was hoping that HP has sold a part, but if they do, they hide it of course on their website.  Can anyone recommend such an adapter?  Thank you.

  Concerning

  John

  wb2001 wrote:

  "I was also unable to find a tool-less adapter to install a 3.5 disk in CD/DVD Bay 5.25"

  Have you given up on the idea, or have you found a workaround?

  I think putting the empty adapter in its place and drill a hole in the chassis and the adapter.  It looks like I can then use a self-tapping screw to lock the adapter in place.

  Thanks for the reply.

  Concerning

  John

• EliteBook8540w: upgrade HDD on an EliteBook8540w - what HARD drive adapt?

  Hello fellow users of HP laptop

  I own an EliteBook 8540w and wonder what HARD drive I can use to upgrade this box.

  Here are the detailed specifications of the box.

  Processor type: Mobile Quad Core Intel Core i7-740QM, 2100 MHz (16 x 131)

  Card mother name: Hewlett-Packard HP EliteBook 8540w

  Motherboard Chipset: Intel Ibex Peak - M QM57, Intel Clarksfield

  System memory: 8119 MB (DDR3 - 1333 DDR3 SDRAM)

  DIMM1: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

  DIMM2: Samsung M471B5273CH0-CH9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz)

  Video card: NVIDIA Quadro FX 1800 M (1 GB)

  HARD drive:

  The HARD drive I have now is this.

  I assumed that the height of the HARD drive is key here, so not so many restrictions on the HARD drive, is that OK? I could get an SSD as well as long as the height is very well, just?

  Thank you for your help.

  Best regards

  W9Y

  Yes, absolutely. Stick with 2.5 inches wide, 9.5 or 7 mm thickness SATA hdd or SSD. 7 mms are leaner, but the mounting holes are in the same place and the SATA data connector and the power supply is in the same place. You cannot use a 9.5 where only a 7mm is used as on Ultrabooks ultraslim, but a 7mm will replace a 9.5 mm. 7mm fits into the caddy and connectors will still work the drive but does not fill the carriage upwards. Yours is a chunky fellow that originally had a 9.5 mm drive. Sometimes you see disks of 2.5 inches wide from 12mm for blades and those who are not fit.

  If it's in the budget, get an SSD. I'm kinda an envangelist SSD, but you will be too once you have used a.

• Inspiron 6000 new hard drive is not compatible with the old

  I just bought a drive hard 2.5 "new for my Inspiron 6000, a Seagate Momentus 5400.4 (250 GB).  The interface does not seem compatible, unfortunately.

  My computer is already more than 3 years old and I replace with a HD 2 years expansion, simply unplug the old, switching on the connector and plug the new. They must have changed the interface on the new readers!

  My question: is it likely, I just need a different connector, or is the new HD totally incompatible?   I have this spec should I ask the manufacturer of HD in order to ensure that a new HD fits?

  Thank you

  
  

• How to hold the safe HARD drive in the Ultrabay HARD disk adapter

  http://0RZ.tw/hCi4T

  One of the things that I like most my ThinkPad is the Ultrabay. The Ultrabay is by default occupied by the optical drive, but the optical drive can be removed and replaced with a hard drive adapter, a battery or a serial port/parallel adapter. The question always seems not to exist but the disc adapter hard ultrabay is fit to several models. When I insert the ultrabay adapter in my R400, I found that there is little space between the ultrabay and the computer. It is annoying because you have to worry about dust. But the biggest problem is, HARD ultrabay drive adapter could not hold the HARD drive safely! As the photo above, I show the adapter and the HARD disk is connected and hold by the junction! So if submit you adapter to a lot of movement, the drive connector can easily get damaged. Is there a solution to help?

  Hi, the drive HARD Ultrabay adapter is designed for the drives own Lenovo coming w metal a little "shopping cart" mounted around the disk hard with four screws. The adapter is slightly too big. Unfortunately Lenovo does not have shopping cart available as a spare part for use with non-Lenovo disks. In this thread a seller in the United States is listed by selling the caddies and my positive experience with him.

  Of course the caddies made US make unnecessarily expensive. It would be great if you could find a supplier selling these carts located in your geography at a more competitive price. Be sure to post your experiences here, if you manage to find one.