HP Pavilion slimline 400-314: work which hard drive to my hard drive adapter
"My old HP Pavilion slimline computer s5123w turns to March 2015, there a drive hard internal Barracuda 3.5 ST3500641AS-RK can I use a Vantac 2.5"/3.5"/5.25" SATA/IDE to USB 2.0 adapt - CB-ISATAU2 model for hard drive Barracuda to transfer the Outlook2003 to my new computer a HP Pavilion Slimline 400-314
You can find them (May marks) of any good computer store.
Tags: HP Desktops
I'm downgrading a:
HP Pavilion Slimline computer to office 400-314
HP G4A91AAR #ABA
The operating system I install is:
Microsoft Windows 7 Ultimate Edition 64
I used DISKPART to "clean" all THE partitions on the hard drive.
I rebooted and installed Win 7 from a USB key.
The HP Pavilion has an AMD processor.
Device Manager indicates I need to load the op/sys
specific and chip set drivers specific for the:
PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
PCI\VEN_168C & DEV_0032 & CC_028000
PCI\VEN_168C & DEV_0032 & CC_0280
PCI\VEN_10EC & DEV_8136 & SUBSYS_2AFE103C & REV_07
PCI\VEN_10EC & DEV_8136 & SUBSYS_2AFE103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
SM Bus controller:
PCI\VEN_1022 & DEV_780B & SUBSYS_2AFE103C & REV_3A
PCI\VEN_1022 & DEV_780B & SUBSYS_2AFE103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05
This will direct you to my research please?
Thank you for all your work.
First install the amd chipset drivers and reboot. You want the first driver on the Web page.
Who will install the smbus controller.
Ethernet: DL and install second driver on the list...
See if this driver works...
I've been enjoying the nuances of Windows 8.1... right. In any case, I have Win8.1 64-bit on this excellent HP SLimline PC. Now, I need help with the operating system. I am an avid user of Windows 7 and like it a lot. My four PC's the only one with 8.1 and I have some learning curve experiments, of which this is one.
So, I got this computer since July 2014 and did not otherwise than with the administration of the accounts. The problem is that the account administrative principal (Yes, I use two accounts, one for the daily work and an administrator account to manage the computer - life is safer like that).
The username admin account had to be changed, so I did. You would think that changing the name of the account automatically would do this in all areas of the system filiing. In this case, not so much. WIN8.1 has created a new profile.
I'm not saying that the name of the profile has not changed for purposes of connection, he fact and that seems fine. However, looking at the users listed in the Explorer file and also on the network, the old user profile still exists with all rights and privileges of the Administrator profile normal.
I think that's not good for two reasons; It is confusing on the network. It also creates a set of accessible files because there is no way to connect to clean. And it may pose a security problem.
Also, note that has not degraded the function of the computer, but it appears sometimes in unpredictable circumstances.
What have I done to alleviate this problem? Initially took a chance on system restore. I do not have a restore point will go back far in time to correct it. Then I tried the old "select and delete" some content. Not a good idea and the system let me not in all cases. I don't know that it needs to be done by the operating system. I'm not sure I want to change the registry immediately, but maybe it's my only choice.
So, I'm at a stand still for the resolution. Not wanting to rebuild the computer, I need a way to rub user profiles and delete the one which is supposed to be deleted.
As always, thanks to all those who can suggest a positive way to correct this problem. It's probably very easy... maybe
Banhien... Thanks for all your help in this matter. Between your good suggestions and a little thought on my part, I was able to remove the 'extra' account on the computer. To change the standard account using your idea was the key, except in this case, it was a little more complex.
Note that there are only meant to be two accounts on this computer. Here's what I had to do:
1 log on as an administrator.
2. change the administrator account.
3 Rename the account administrator to the name that it was before I renamed it and capture a standard user.
4 restart the computer (even if it is perhaps not necessary, just a good idea so that everything lines up again)
5. open a session under the 'new' admin account (that I changed standard user)
6. remove the standard account renamed and all of its associated files.
7. create a new Admin account as the administrator
8 change the original standard user, turned administrator, standard user feedback.
Now, I'm back for two accounts; an administrator account and a Standard user account.
Restarted the computer.
Set up the 'new' account of the administrator
Thanks again for your help. Have a great day.
Is it possible to change the font size - I seem to have only the possibility of 100-125-150, which is not satisfactory.
@Richard_384, welcome to the forum.
You should go to control panel / display / change display settings. There, you should check the Advanced display settings / advanced resizing of text and other elements. If this does not help, check the ease of access. Maybe it's the Magnifier turned on.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
A friend brought me his computer for repair and looking for the admin password to start.
There is a rider of password on the motherboard with that you have to finagle.
To clear the password BIOS follow these steps:
1. turn OFF the computer and unplug the power cord.
2 move the jumper of password of pins 2 and 4 (by default) on pins 4 and 6.
3. connect the power cord and turn on the computer. Password should be gone now.
4. turn OFF the computer and unplug the power cord.
5. then replace the default password jumper (pins 2 and 4).
Below the diagram of the motherboard... the password jumper is marked on the motherboard (in white) on the lower right part of the image (where you see blue jumpers).
You need to understand who is who, because there is no diagram to jump.
It seems to me that a blue jumper clears the CMOS memory, and another erasing the password.
I would change the original HDD with a SSD. The Council has two Sockets Sata for the HARD drive and the other for DVDs. The current HARD disk goes up by only two screws slide into a hole in the bracket. How can I adapt this to an SSD silent and cold. Where can I get a support which is cond in space.
I have a HP pavilion slimline 400-034pc.
Thank you. I'll order a.
I have a PC with Windows 8.1 x 64 which does not run the "sfc/scannow" command of HP Pavilion Slimline 400 desktop. When run from a CMD prompt window ("run as Administrator") the result returned is:
"Windows resource protection could not start the repair service."
I restored Windows 8.1 at the factory of HP with the same result.
I tried using 'Online Dism/Cleanup-Image /RestoreHealth' and get:
Maintenance of the images of deployment and management tool
You cannot service a 64 bit OS with a 32-bit version of DISM.
Please use the version of DISK that corresponds to the architecture of your computer.
Anyone can get an idea as to why ' sfc/scannow' and the DISM command does not work?
I suspect that the recovery partition is corrupt and that it would have to use HP recovery discs.
If you want to order and if you live in the USA/Canada, call this number 1-800-334-5144 HP and see if you can still get a set of recovery disks.
I have another solution that doesn't cost anything. You can download and burn an ISO of Windows 8.1 from the following site. He won't get the HP software or bloatware, is a commercial version. Have on hand your license key:
If you can, back up your data.
I want to upgrade the memory of my HP pavilion slimline 400-224. After opening the case, how do I determine how many memory locations is available? The current Council of the memory is SK Hynix 4 G 1Rx8 PC3L 12800 S-11-13 - B4. It seems to be another location, just underneath and take-away.
Can you tell me if this machine has one or two slots for memory... Any help on this would be greatly appreciated.
Here are thespecifications of your machine. It allows two modules of 8 GB. You said 4 GB installed. Which would jive with your Visual (only 1 modules installed). If it was mine, I would opt for a corresponding module of 4 GB and do with it.
HP PartSurfer does not list the SK Hynix 4 G 1Rx8 PC3L 12800 S-11-13 - B4. Another curious point, the specs list 6 GB installed. It would be a 4 GB and 2 GB modules.
Please give me recommendation or choice, compatible (vga) graphics card for HP Pavilion Slimline 400 - 020l available on the market.
You need an active UEFI, low profile graphics card low power with support of full size. Sometimes graphics cards are supplied with two brackets. Your PC has only a 270-Watt power supply, so your pickins will be limited.
I saw a few cards that could work but all graphics cards manufacturer recommend a greater power.
A higher power Slimline power of Athena could work in your PC.
You can use GPU - Z to determine performance (band memory bandwidth) as a starting point for when you are looking for a graphics card.
When is it sholud I never update my bios?
The BIOS updates are available in the section of driver download Windows 8 of the portal support for your laptop.
It is not really necessary to update the BIOS.
If you feel that you just have to do and don't mind the risk involved, then download the latest version of your download folder and double-click the softpaq.
Let him finish and do not turn off the Democratic Party until the end.
Do not follow this notice may result in a PC masoned.
A "Bricked" PC is an expensive paperweight is no longer done something of value.
I have a hp pavilion slimline 400 and I want to upgrade the graphics card of it. However, the food is not enough for my new graphics card. The image is too large for this case. SO I decide to buy a new case and PS! Move all the thing inside the hp pavilion slimline 400 to a new case. But I heard someone say that this kind of PC can match the case that we can buy in the store and the cable of the PIN from those of food on the market do not correspond with the motherboard. CAN I really do that?
You will still need a case that supports the Μatx layout. I/O back plate must be modded or replaced to adapt. Most cases have both Μatx and ATX layout (dead end of pines). For some time that this question of stitching was done. These help?
I tried in vain to install my old Bejeweled game on my brand new HP Pavilion Slimline 400 office. No matter how many times I clicked on the Install of the game on my screen button, nothing happened. Oddly, I had no problem installing the same game on my laptop. The computer is running Windows 7, while the desktop is running Windows 8.1 (I don't know if it's 32-bit or 64-bit). The version of Windows would have something to do with it? Is there something I can do?
If you can read the whole page, you will notice that the OS is Win7. No mention of Win8. You can find new versions for WIN8 on the web.
Model of GPU's profile card low 250 R7 radeon...
Please notify. .
Please provide a link to the video card with the name real full manufacturer and model...
It is unlikely. If you install the card it starts.
The specifications of the manufacturers for a few models that I've read have minimum systems requirements for a 400 Watt POWER supply. Your HP pavilion slimline d 400-235 is delivered with a 270-watt POWER supply. This would be a showstopper for the video card. There is no 400 Watt or POWER supply plu available for a slimline PC on the market that I know.
People have beentrying to upgrade the PSU in slimline PCs years. When they find out this critical show-stopping detail, have usually to throw in the towel and realize that the slimline PCs are not meant to be upgraded.
HP Pavilion Slimline computer to desktop PC this 400-224 was soon out of the box. I've had it for about 4 weeks now and he has a lot of problems. Slow, freezes and hangs up. Internet is going in and out. The internet access in the taskbar icon flashes. I went to the Device Manager and the Device Manager continues to Flash. When it hits takes sometimes a few minutes before something comes along. I updated the computer and that did not help so I did a cover of the complete plant and she just got more of a pain so much more pain. I read on the line where many are have this same problem with this model. I'm ready for any help one can offer.
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that you are having problems with your HP Pavilion Slimline Desktop PC 400-224 is slow, freezing and hanging and you already have a factory recovery complete. How new is this computer and the problems and the measures already taken, I would like to you please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. You want to make sure that your computer is a device working properly and that all the problems are properly documented under warranty.
I want to thank you for display on the HP Forums. Have a great day!
My grandparents bought a HP Slimline 400-034 from Bestbuy (refurb, sigh), or all of a sudden only put up now after he have 4 months. When I plug the power to the PSU cables, the led is green. When I hit the power button, the CPU fan turns quickly, but the computer will not feed.
I am quite sure that the power supply is good because it has the green light to the rear, and the CPU fan turns briefly. I unplugged the CD-ROM and USB ports in the front to reduce the load of power, but it will still be running. Is the Mobo that made, or is there something else I can try?
Thanks in advance!
Follow the steps described in the guide. My opinion is that the power supply is BAD. These PSU's TFX.
Maybe you are looking for
I have a lot of smart folders. All these smart folders have been defined, the search in a certain (i.e. filed) folder where I have all my files. I plan to move all my files to iCloud drive to an equivalent folder (which is archived). Is it possible t
Hello I want to upgrade my current Core Duo T2450 CPU to something faster or T7400, T7600. I know that PM945 will manage it but what about the BIOS? I have 1.80 which is the last for my model. Where can I find that some BIOS change log to see if the
My new laptop will not install my printer B210a Photosmart. It is on the same wireless network and can be seen, but cannot find any drivers online. I tried to get drivers from the HP site, but this just links to a page that doesn't seem to have any
When I download music it used to open in a folder and I could click on each piece individually and then import them into Itunes, but now it always opens with whatever program is set as default, I can no longer import into Itunes
Please provide info - for the following problem: I use Office 2003. Everytime I open excel or word it is a box that says BCM OFFICE ADDIN - OFFICE APPLICATION VERSION IS NOT MATCH. I click ok and the box disappears. When I try to download an e-mail t