6000 pro SFF: motherboard update

Similar Questions

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• 6000 pro SFF: installing the video card on 6000 Pro SFF with BIOS 2.03

  I am in train to install a video card in my 6000 Pro SFF and find that when the new video card is inserted, neither she, nor my tip on video card working.

  Assuming that their must be a way to get the card to operate in the BIOS (2 786 v2.03), I'm going to the "Advanced" tab and find "PCI devices. Underside of the mentioned deviced is 'Controller VGA Intel'. Choice for this controller are the IRQ = 5, 10, 11, or disabled. Apparently, the default value is 5 because that's how it is now set.

  A little scared that if I put "Disabled", which will be not only the new video card does not work, but the video card on the motherboard won't work, too.

  Y at - it anyone out there that can tell me if you change the VGA Intel controller to disabled is the right way to install the new card, and that I only put my computer in a heavy paperweight by.

  You are welcome.  Thank you for the additional information.

  I don't think you have to do anything in the BIOS.  At least, I wouldn't do anything, until you have improved the PSU to see what is happening.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Compaq 6000 PRO SFF: Need some drivers for this desktop computer

  Hello, I have a model # HP Compaq Desktop 6000 PRO SFF and I need drivers for it the following:

  PCI serial port

  PCI Simple Communications controller

  Trusted Platform Module 1.2

  Someone please help... Thank you

  You are the very welcome.

  You need this driver.  Install manually if auto installation does not work.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45367 .exe

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• HP Compact microtour 6000 Pro: first Motherboard supporting UEFI

  Hi, someone knows the first motherboard that supports UEFI HP, I have a 4 TB HDD in my 6000 Pro MT and want to use the full disk.

  Thank you, Tim

  Hi, Tim:

  The 6200 Pro motherboard would be the most old motherboard has a UEFI BIOS.

  If you use your HARD drive of 4 TB as a data-only drive, you can use all 4 to if you format in the GPT format.

  If you want to boot from it then you need a UEFI BIOS.

  Read this white paper from HP for more information on UEFI, GPT, etc..

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3459240&docid=emr_na-c02826744&docLocale=en_US

• missing PCI Simple Communications controller for HP Compaq 6000 Pro SFF PC

  HY, I installed windows 7 on my Hp compaq 6000 pro.but simple Communications controller PCI is not found. I searched a lot and tried a lot of drivers.but this problem is not fixed

  Here's my hardware ID

  PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C & REV_03
  PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C
  PCI\VEN_8086 & DEV_2E14 & CC_078000
  PCI\VEN_8086 & DEV_2E14 & CC_0780

  Hello:

  You need this driver...

  This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45411.exe

• HP Compaq 6000 Pro SFF: I can not boot my HP Compaq 6000 Pro SFF USB

  I can't start my PC from a USB key, for example, to install a new Linux Distro, etc.

  First, I set the BIOS to turn on the Flash DRIVE as the first device, and then I check the tab security for USB are enabled.

  So I see the USB in the BIOS, and in fact, I can see pendrives when I'm in Windows, but anyway that I can't boot the PC by USB, although I use Plop Boot Manager, a CD that allows you to boot from a USB key.

  I'd appreciate any help to solve this problem.

  Thank you!

  P.S.: It's a socket 775 PC, so there not EFI BIOS like these last series 6200, 6300, etc..

  BIOS has been updated to the latest version: v2.02

  I had a similar problem with my HP 6000.  The tip that is offered another forum [restore you default settings] for the BIOS, it resets the settings for the USB ports and they work correctly again.

  Restore your default settings, and then select the option to set default values and exit.  Reboot, then go back into the BIOS to reset your boot on USB order and your USB ports should start correctly (if your problem was the same as mine).

• HP Compaq 6000 Pro SFF Win 7 Pro 64-bit

  Need help installing RAM. 2 GB PC #-10600U 1333 Mhz supplied with computer. I try to install Crucial 8 GB DDR3 1333 mhz p/n ct102464ba1339.c16fed
  I put the new key in the black slot and the jury returns 5 beeps and a red front end light. I tried that, in my view, are all other possible compinations with the same result.
  HP said it is good RAM and should support up to 16 GB.
  I saw evrything I can find and still no solution. Thank you.

  Hello:

  The maximum memory each slot can take is multiplied by 4 slots 16 GB = 4 GB.

  Cannot install 2 x 8 GB or any single chip 8 GB to 16 GB.

  See the form below... page 10.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287311

• HP Compaq 6000 Pro SFF: PCI Simple Communications Controller Driver Windows 7

  Good afternoon everyone,

  I'm in the middle of installing Windows 7 on a 6000pro but I could not find the driver for the controller PCI of communication Simple.

  The hardware ID is:

  PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C & REV_03

  PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C

  PCI\VEN_8086 & DEV_2E14 & CC_078000

  PCI\VEN_8086 & DEV_2E14 & CC_0780

  Any help that anyone can give me to find the Windows 7 for 32-bit driver would be great.

  Thank you

  Hello

  Please use driver Chipset from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4023816&swLangOid=8&swEnvOid=4058

  Kind regards.

• Invalid electronic serial number after swapping out motherboard, HP Compaq 6200 Pro SFF

  Hello

  I have just replaced a motherboard under warranty and I try to find the utility to change S/N in the BIOS, have obtained a location for the equivalent laptop but can't find the PC version using a USB.

  I have CSN access, but cannot find the utility appropriate to effect the change.

  PC is:

  HP Compaq 6200 Pro SFF

  Any help would be appreciated.

  Thank you

  Darren

  [Personal information]

  Hello:

  Here's what you need to do... This model has no need to inventory number or serial number change utility...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• Problem with the choice of screen update on HP Compaq Pro SFF 6300

  My HP Compaq Pro SFF 6300 continuously lists "HP Compaq Business Desktop System BIOS (BIOS K100)" as an element to be updated - even if I chose and installed this update several times.  What is going on?  Thanks for any help or information.

  Thanks for the additional information.  I'll follow your advice and simply ignore the request to update.  Leave well enough alone, given that the computer works well at the present time.  Once again, thank you.

• Hewlett - Packard HP Compaq 6000 Pro MT PC memory problems

  I have a few Hewlett-Packard Compaq 6000 Pro MT of the HP PC I want to make a memory upgarde. At the moment the memory installed on each of them is 2 GB Micron 8JTF25664AZ-1G4D1 - 2 GB DDR3 - 1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz). I bought 2 different brands with the same specification that Corsair XMS3 4 GB 1x4Go memory SDRAM Desktop DDR3 1333 Mhz DIMM 240-pin CL9 and Kingston HyperX Blu 4 GB of RAM DDR3 1333 MHz DIMM 240 pin CL9 memory generic. When mounting this new memory I get the error message sound for faulty memory. Memory have been tested on the brand of the other computer and it works fine.

  Can someone tell me what I will do in this case? I updated the BIOS as well, but still no change.

  Kind regards

  Patrick

  I not really much information but what I have found, here's a thread @Tom in the same direction as your ad material .  It shows the same symptoms as published at the end.  This person has used BLS2KIT4G3D1609DS1S00, which is the FOLLOWING.  Found on AMAZONandEWEGGN.  Also to MICROCENTER.

  Motherboards are picky when using RAM, so use what is known to work.

• HP 6005 Pro SFF: Replace video card ATI Radeon HD 4200 graphics upgrade for HP 6005 Pro SFF

  I have a HP 6005 Pro SFF with a 240W PS, and I want to upgrade the video card.  It has an ATI Radeon HD 4200.    An HP Forum person (Paul Tikkanen) recommended an upgrade for a 6005 using a video card optional for the HP 6200 Pro SFF:

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439&cm_re=hd_6450-_-14-121-439-_-product

  Please confirm it also works for the 6005.  If I replace it, can I actually remove the Radeon 4200 and replace it directly at the space of the same card mother slot to save space of PCI Expansion slot, or do I use the expansion PCI Express 16 x slot?   If so, is the procedure for the direct replacement documented anywhere?

  Hello:

  The ATI Radeon HD 4200 Video on your PC is the graphics chip integrated according to page 14 of the quickspecs at the link below. In other words, the graphics card is a chip that is soldered to the motherboard.  It is not in an expansion slot.

  http://static.highspeedbackbone.NET/PDF/HP%20Compaq%206005%20PRO%20Business%20pc%20Quick%20Specs.PDF

  The dedicated PCI express x 16 slot should be empty now, and this is where you install the card I have recommended.

  I don't see why the HD 6450 work.  It works in the dc7800, dc7900, Pro 6000, 6200 pro, 8000 Elite, Elite 8100 and 8200 Elite business desktop PC.

  You just need to make sure that uninstall you the HD 4200 graphics card and the driver in Device Manager.  Also check the uninstalling the driver box.

  Also uninstall catalyst control center software in the Add/Remove programs in the control panel section, stop and disconnect the PC, install your new video card and the driver for the 6450.

  Here is the link to the service manual. See Chapter 2 pp 20-25 for the installation procedures card expansion, paying special attention to the info of PCIe x 16 slot.

  http://h10032.www1.HP.com/CTG/manual/c01870938

• HP 6300 Pro SFF stops unexpectedly

  I have a question involving a HP 6300 Pro SFF that has been repeatedly and intermittently closing, although several major components were replaced and the PC has been reimagee.  I wonder what I missed and am looking for advice on what to try next.  Through independent and one-at-a-time technician, we replaced the motherboard, RAM modules, the hard drive and power supply.  I ordered but not yet installed a replacement CPU, even if it tests the 'good' through the latest UEFI.   Interesting thing about the trial of the UEFI for the motherboard, verification of jury system says "Device not found", but goes in the log file.  This result occurred in the original and the replacement motherboard.  I also restored to the course in ways that we don't normally do, replacing the mouse, keyboard, AC, the power surge suppressor cable, moved the PC to another place, I tried different taken CA, put it on a UPS or not, clean the CPU and reapply the thermal paste, the relocation of the RAM, etc.  We have several thousand of these units in our company and just this Wednesday, we received another call on another site where a Pro SFF 6300 has been shut unexpectedly on the client.  We have immediately made by the Distributor OEM for my machine to fix through the process responsible for itself and that's what I tried to do, but in this case the most recent I sent as a return to the Distributor OEM for analysis or investigation.  I have not had a technician HP come on site or called HP support, but this will be the final step available to us if the replacement of the CPU also fails.  Any suggestions?

  Thank you

  Mike

  It is the CPU...

  The bad CPU after 100 iterations with success.  Beware of the hard locks!