Sysopt connection permit VPN
Just need someone to check it out...
The "sysopt connection permit-vpn" command tells the ASA to allow VPN regardless of access, correct lists traffic?
and I choose not to use this command and control traffic on the outdoor access list?
Thanks in advance!
Hello
What you say is correct.
However, to limit the VPN traffic, I prefer to leave the sysopt and create vpn-filters.
Federico.
Tags: Cisco Security
Similar Questions
-
Problem with "vpn sysopt connection permit.
Hi all
I would like to ask you for advice with "vpn sysopt connection permit". I have a problem with by-pass-access list (acl) in the INSIDE interface. As I understand it and I'm going to use this command, there is no need to especialy allow traffic in the access list for the INSIDE and I can control the filter-vpn traffic. But in my case it's quite the opposite, I want particularly to this INTERIOR acl traffi. When I allow this traffic inside acl L2L tunnel rises, hollow traffic flow vpn-fltr ane acl that everything is OK. But when I do not allow that this traffic is inside of the rule with Deny statement in acl INSIDE block traffic and tunnel goes ever upward. Part of the configuraciton which you can view below.
Please let me know if I'm wrong, or what I did wrong?
Thank you
Karel
PHA-FW01 # view worm | Worm Inc
Cisco Adaptive Security Appliance Software Version 4,0000 1
PHA-FW01 # display ru all sys
No timewait sysopt connection
Sysopt connection tcpmss 1380
Sysopt connection tcpmss minimum 0
Sysopt connection permit VPN
Sysopt connection VPN-reclassify
No sysopt preserve-vpn-stream connection
no RADIUS secret ignore sysopt
No inside sysopt noproxyarp
No EXT-VLAN20 sysopt noproxyarp
No EXT-WIFI-VLAN30 sysopt noproxyarp
No OUTSIDE sysopt noproxyarp
PHA-FW01 # display the id of the object-group ALGOTECH
object-group network ALGOTECH
object-network 10.10.22.0 255.255.255.0
host of the object-Network 172.16.15.11
PHA-FW01 # show running-config id of the object VLAN20
network of the VLAN20 object
subnet 10.1.2.0 255.255.255.0
L2L_to_ALGOTECH list extended access permitted ip object object-group VLAN20 ALGOTECH
extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH
Note EXT-VLAN20 of access list =.
access list EXT-VLAN20 allowed extended ip object VLAN20 ALGOTECH #why object-group must be the rule here?
access list EXT-VLAN20 extended permitted udp object VLAN20 object-group OUT-DNS-SERVERS eq field
EXT-VLAN20 allowed extended VLAN20 object VPN-USERS ip access list
EXT-VLAN20 extended access list permit ip object VLAN20 OPENVPN-SASPO object-group
EXT-VLAN20 allowed extended object VLAN10 VLAN20 ip access list
deny access list extended VLAN20 EXT ip no matter what LOCAL NETS of object-group paper
EXT-VLAN20 allowed extended icmp access list no echo
access list EXT-VLAN20 allowed extended object-group SERVICE VLAN20 object VLAN20 everything
EXT-VLAN20 extended access list deny ip any any newspaper
extended access list ACL-ALGOTECH allow ip object-group object VLAN20 ALGOTECH
GROUP_POLICY-91 group policy. X 41. X.12 internal
GROUP_POLICY-91 group policy. X 41. X.12 attributes
value of VPN-filter ACL-ALGOTECH
Ikev1 VPN-tunnel-Protocol
tunnel-group 91.X41. X.12 type ipsec-l2l
tunnel-group 91.X41. X.12 General attributes
Group Policy - by default-GROUP_POLICY-91. X 41. X.12
tunnel-group 91.X41. X.12 ipsec-attributes
IKEv1 pre-shared-key *.
PHA-FW01 # show running-config nat
NAT (EXT-VLAN20, outdoors) static source VLAN20 VLAN20 static destination ALGOTECH ALGOTECH non-proxy-arp-search to itinerary
network of the VLAN20 object
dynamic NAT interface (EXT-VLAN20, outdoors)
group-access to the INTERIOR in the interface inside
Access-group interface VLAN20 EXT EXT-VLAN20
Hello
The command "sysopt connection permit-vpn" is the default setting and it applies only to bypass ACL interface to the interface that ends the VPN. It would be connected to the external network interface. This custom has no effect on the other interfaces ACL interface.
So if you initiate or need to open connections from your local network to remote network through the VPN L2L connection then you will need to allow this traffic on your LAN interface ACL networks.
If the situation was that only the remote end has launched connections to your network then 'sysopt permit vpn connection' would allow their connections around the external interfaces ACL. If If you have a VPN configured ACL filter, I think that the traffic will always accompany against this ACL.
Here are the ASA reference section to order custom "sysopt"
http://www.Cisco.com/en/us/docs/security/ASA/command-reference/S21.html#wp1567918
-Jouni
-
Sysopt permit-vpn connection, where it lies in ASDM?
Part of my OCD is a need to know where to find the cli commands are configured in asdm. Does anyone know where to find the vpn sysopt connection permit is configured in asdm?
Sent by Cisco Support technique iPad App
I guess that's the version of ASDM function you have. For version 6.4, it is:
Configuration--> you can find it on:
Remote access VPN--> network access (Client)--> the connection profile AnyConnect--> and on the right screen, it would be: "enable incoming VPN sessions bypass interface access lists. Political and by user group... »
OR /.
VPN site to Site--> profiles of connection--> and on the right screen, there the same as above: "enable incoming VPN sessions bypass interface access lists. Political and by user group... »
Hope that helps.
-
Unable to access an internal network while being connected with VPN
Hello
We have a PIX 515E with a remote access vpn.
Our internal network has an address network 192.168.1.0/24, and addresses we assign to vpn clients are 192.168.1.49 - 192.168.1.62, or 192.168.1.48/28.
When I connect to the vpn, I cannot ping none of my hosts internal. The error I get is "no group of translation not found for icmp src:...» »
It is quite clear that I would need a NAT rule, but why? Addresses are in the same network...
Could someone enlighten me on how I should proceed to nat traffic between vpn clients and the internal network?
Thank you.
Here is my current setup:
6.3 (1) version PIX
interface ethernet0 car
Auto interface ethernet1
Auto interface ethernet2
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif dmz security50 ethernet2
activate the password * encrypted
passwd * encrypted
hostname pix
domain callio.com
outside_inbound list access permit tcp any host 66 *. **. * eq www
outside_inbound list access permit tcp any host 66 *. **. * eq https
outside_inbound list of access permit udp any host 66 *. **. * Log domain eq
outside_inbound list access permit tcp any host 66 *. **. * Log domain eq
outside_inbound list access permit tcp any host 66 *. **. * object-group mailserver
outside_inbound list access permit tcp any host 66 *. **. * Newspaper ftp object-group 5
outside_inbound list access permit tcp any host 66 *. **. * eq 9999 journal 5
outside_inbound list access permit tcp any host 66 *. **. * eq www
outside_inbound list access permit tcp any host 66 *. **. * eq www
access-list outside_inbound udp host 66 license *. **. * Welcome 66 *. **. * eq syslog
outside_inbound deny ip access list a whole
pager lines 24
IP address outside 66 *. **. * 255.255.255.240
IP address inside 192.168.1.1 255.255.255.0
IP dmz 192.168.2.1 255.255.255.0
IP verify reverse path to the outside interface
local pool IP VPN-RemoteAccess 192.168.1.49 - 192.168.1.62
ARP timeout 14400
Global (outside) 10 66 *. **. * netmask 255.255.255.0
NAT (inside) 0-list of access no_nat_dmz
NAT (inside) 10 192.168.1.0 255.255.255.0 0 0
static (dmz, outside) 66 *. **. * c4 netmask 255.255.255.255 0 0
static (dmz, outside) 66 *. **. * 192.168.2.3 netmask 255.255.255.255 0 0
static (dmz, outside) 66 *. **. * 192.168.2.5 netmask 255.255.255.255 0 0
static (dmz, outside) 66 *. **. * 192.168.2.6 netmask 255.255.255.255 0 0
static (dmz, outside) 66 *. **. * 192.168.2.100 netmask 255.255.255.255 0 0
static (inside, dmz) 192.168.1.0 192.168.1.0 netmask 255.255.255.0 0 0
Access-group outside_inbound in interface outside
Route outside 0.0.0.0 0.0.0.0 66 *. **. * 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
NTP server 199.212.17.15 source outdoors
Enable http server
http 192.168.1.101 255.255.255.255 inside
http 192.168.1.105 255.255.255.255 inside
SNMP-server host inside 192.168.1.105
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Sysopt connection permit-pptp
Telnet timeout 5
SSH 192.168.1.105 255.255.255.255 inside
SSH timeout 5
Console timeout 0
VPDN PPTP VPN group accept dialin pptp
VPDN group VPN-PPTP ppp mschap authentication
VPDN group VPN-PPTP ppp mppe auto encryption required
the client configuration address local VPN-RemoteAccess VPDN group PPTP VPN
VPDN group VPN-PPTP client configuration dns 192.168.1.2
VPDN group VPN-PPTP pptp echo 60
authentication of VPN-PPTP client to the Group local VPDN
VPDN username someuser password *.
VPDN allow outside
Terminal width 80
Please use the following URL to check your config:
I hope this helps.
Jay
-
Difficulty accessing 1 remote desktop when connected with VPN
Hello world
I have an ASA 5505 and have a problem where when I connect via VPN, I can RDP into a server using its internal address but I can't RDP to another server using its internal address.
One that I can connect to a an IP of 192.168.2.10 and I can't connect to a a 192.168.2.11 on 3390 port IP address.
The two rules are configured exactly the same except for the IP addresses and I can't see why I can't connect to this server.
I am also able to connect to my camera system with an IP on port 37777 192.168.2.25 and able to ping any other device on the network internal.
I also tried ping he and Telnet to port 3390 without success.
Here is the config.
ASA 4,0000 Version 1
!
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.2.2 255.255.255.0
!
interface Vlan3
nameif outside
security-level 0
10.1.1.1 IP address 255.255.255.0
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the OWTS-LAN-OUT object
10.1.1.10 range 10.1.1.49
network of the OWTS-LAN-IN object
Subnet 192.168.2.0 255.255.255.0
service of the RDP3389 object
service destination tcp 3389 eq
Description of DC
the object SERVER-IN network
host 192.168.2.10
network of the SERVER-OUT object
Home 10.1.1.50
network of the CAMERA-IN-TCP object
Home 192.168.2.25
network of the CAMERA-OUT object
Home 10.1.1.51
service object CAMERA-TCP
Service tcp destination eq 37777
the object SERVER-Virt-IN network
Home 192.168.2.11
network of the SERVER-Virt-OUT object
Home 10.1.1.52
service of the RDP3390 object
Service tcp destination eq 3390
Description of VS for Master
network of the CAMERA-IN-UDP object
Home 192.168.2.25
service object CAMERA-UDP
Service udp destination eq 37778
the object OWTS LAN OUT VPN network
subnet 10.1.1.128 255.255.255.128
the object SERVER-Virt-IN-VPN network
Home 192.168.2.11
the object SERVER-IN-VPN network
host 192.168.2.10
the object CAMERA-IN-VPN network
Home 192.168.2.25
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
AnyConnect_Client_Local_Print deny ip extended access list a whole
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
implicit rule of access-list inside1_access_in Note: allow all traffic to less secure networks
inside1_access_in of access allowed any ip an extended list
outside_access_in list extended access allowed object RDP3389 any host 192.168.2.10
outside_access_in list extended access allowed object RDP3390 any host 192.168.2.11
outside_access_in list extended access allowed object CAMERA TCP any host 192.168.2.25
outside_access_in list extended access allowed object CAMERA UDP any host 192.168.2.25
pager lines 24
Enable logging
exploitation forest-size of the buffer 10240
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
local pool RAVPN 10.1.1.129 - 10.1.1.254 255.255.255.128 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT static destination SERVER-IN-VPN SERVER-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN
NAT static destination of CAMERA-IN-VPN VPN-IN-CAMERA (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN
NAT static destination of SERVER Virt-IN-VPN-SERVER-Virt-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN
!
network of the OWTS-LAN-IN object
NAT dynamic interface (indoor, outdoor)
the object SERVER-IN network
NAT (inside, outside) Shared SERVER-OUT service tcp 3389 3389
network of the CAMERA-IN-TCP object
NAT (inside, outside) static CAMERA-OFF 37777 37777 tcp service
the object SERVER-Virt-IN network
NAT (inside, outside) Shared SERVER-Virt-OUT 3390 3390 tcp service
inside1_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 10.1.1.2 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP
DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = SACTSGRO
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 192.168.2.0 255.255.255.0 inside
Telnet timeout 15
SSH 192.168.2.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 15
dhcpd auto_config inside
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
username admin privilege 15 xxxxx encrypted password
attributes of user admin name
VPN-group-policy DfltGrpPolicy
type tunnel-group CTSGRA remote access
attributes global-tunnel-group CTSGRA
address RAVPN pool
IPSec-attributes tunnel-group CTSGRA
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:0140431e7642742a856e91246356e6a2
: end
Thanks for your help
Ok
So, basically, you set up the router so that you can directly connect to the ASA using the Cisco VPN Client. And also, the goal was ultimately only allow traffic to the LAN through the VPN Client ONLY connection.
It seems to me to realize that you have only the following configurations of NAT
VPN Client NAT0 / free of NAT / identity NAT
the object of the LAN network
Subnet 192.168.2.0 255.255.255.0
network of the VPN-POOL object
subnet 10.1.1.128 255.255.255.128
NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL
The NAT configuration above is simply to tell the ASA who don't do any type of NAT when there is traffic between the network 192.168.2.0/24 LAN and VPN 10.1.1.128/25 pool. That way if you have additional hosts on the local network that needs to be connected to, you won't have to do any form of changes to the NAT configurations for customer VPN users. You simply to allow connections in the ACL list (explained further below)
Failure to PAT
object-group network by DEFAULT-PAT-SOURCE
object-network 192.168.2.0 255.255.255.0
NAT automatic interface after (indoor, outdoor) dynamic source by DEFAULT-PAT-SOURCE
This configuration is intended just to replace the previous rule of PAT dynamic on the SAA. I guess that your router will do the translation of the ASA "outside" IP address of the interface to the public IP address of routers and this configuration should allow normal use of the Internet from the local network.
I suggest you remove all other NAT configurations, before adding these.
Control of the VPN clients access to internal resources
Also, I assume that your current VPN client is configured as full Tunnel. In other words, it will tunnel all traffic to the VPN connection, so that its assets?
To control traffic from the VPN Client users, I would suggest that you do the following
- Set up "no sysopt permit vpn connection"
- This will change the ASA operation so that connections through a VPN connection NOT allowed by default in order to bypass the ACL 'outside' interface. So, after this change, you can allow connections you need in the 'outer' interface ACL.
- Configure rules you need for connections from VPN clients to the "external" ACL interface. Although I guess they already exist as you connect there without the VPN also
I can't say this with 100% certainty, but it seems to me that the things above, you should get to the point where you can access internal resources ONLY after when you have connected to the ASA via the connection of the VPN client. Naturally take precautions like backups of configuration if you want to major configuration changes. If you manage remotely the ASA then you also also have the ability to configure a timer on the SAA, whereupon it recharges automatically. This could help in situations where a missconfiguration breaks you management connection and you don't have another way to connect remotely. Then the ASA would simply restart after that timer missed and also restart with the original configuration (as long as you did not record anything between the two)
Why you use a different port for the other devices RDP connection? I can understand it if its use through the Internet, but if the RDP connection would be used by the VPN Client only so I don't think that it is not necessary to manipulate the default port 3389 on the server or on the SAA.
Also of course if there is something on the side of real server preventing these connections then these configuration changes may not help at all.
Let me know if I understood something wrong
-Jouni
- Set up "no sysopt permit vpn connection"
-
Impossible to access all subnets when connected by VPN
I'm a total newbie when it comes to cisco and routing, so forgive me if this has been answered before.
We have a cisco 2821 router which supports VPN connections. Our local network is a 22 (255.255.252.0) xxx.xxx.0.0 xxx.xxx.1.0 xxx.xxx.2.0 xxx.xxx.3.0 subnets. I can connect by VPN, and I can access my xxx.xxx.1.0 subnet with no problems. However, I can't access the subnets xxx.xxx.2.0 and xxx.xxx.3.0.
I don't know even where to start. I have seen similar topics but I need "dumbed down" for me. Preference of the solutions that I can apply through the SDM. I'm terrible with the CLS.
Thanks for any help provided! :-)
It's here
access-list 199 permit ip 10.1.0.0 0.0.1.255 10.1.255.0 0.0.0.255
your customers receive the address pool of 10.1.255.0 0.0.0.255
to allow access to any other network in your local network from the vpn client
access-list 199 permit ip 10.1.255.0 0.0.0.255
You must add the same lines that you add in the 199 ACL ACL 104 but with the action to refuse since you are using nat
104 refuse 10.1.0.0 ip access-list 0.0.1.255 10.1.255.0 0.0.0.255
Notice that you use a deny and that is to tell the router to do no. NAT traffic.
I hope that helps... Let me know
-
iPhone 6s won't connect to VPN on work wifi but goes on other wifi networks
Hello
I have been connected to my wifi to work for a while and had to use a VPN to use things such as whats'app and access to sites like Facebook. It worked well until what recently just VPN logs not when I am connected to this wifi network. I know that the password etc and I get the symbol wifi at the top of my phone but never impossible to access Web sites (which was normal, but the VPN it fixed), but now I can not connect the VPN even more.
The VPN application I use is Betternet but I've also tried a few others, none works. However, they all work when I connect to my own wifi network.
iPhone 6 s - last version of iOS from today (28 Apr 16) cannot find the exact version on my phone
Pleaseeeeee help me connect to my VPN when I'm on my work wifi
VPN can be difficult, maybe to consult Betternet. Also see this article for suggestions.
iOS: setting up VPN - Apple Support
FWIW here are some general recommendations for Wi - Fi problems, maybe one of them will help you.
(1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.
(2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.
(3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).
(4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4
(5) disable the prioritization of device on the router if this feature is available.
(6) determine if other wireless network devices work well (other iOS devices, Mac, PC).
(7) try the device on another network, i.e., neighbors, the public coffee house, etc.
(8) to restore the device (ask for more details if you wish).
https://support.Apple.com/en-us/HT201252
(9) go to the Apple Store for the evaluation of the material.
-
If a PC with a DHCP server is connected via VPN, with her serve IP addresses on the tunnel?
Situation: we have a few portable computers test Ubuntu running DHCP servers. We need get the updates and other changes in corporate network sometimes. Today, we turn off the DHCP server, set up to get an IP via DHCP (besides) and make our updates.
Problem: we do not want someone accidentally connect the laptop to the corporate network, while its DHCP server is running.
Question: so, if we go via wifi using a Cisco VPN client, the DHCP server IP addresses above the tunnel?
Thanks for reading.
N ° DHCP uses layer 2 broadcasts to disseminate IP addresses. Because your clients are connected via VPN, there is no contiguity of layer 2. The only way he would accidentally do it is if you have configured an address to support IP dhcp as one of your VPN clients on the network, which I imagine you wouldn't.
-
Sharing internet connection with VPN in Windows 8
Previously with Windows 7, I put my VPN to share its connection to the Ethernet port on my laptop. So whenever it connects to the internet, my Xbox would take the connection too via Ethernet connected by VPN. But now after the upgrade to Windows 8 Pro, I did the same thing, but the Xbox, or any other device that connects to my Ethernet port does not receive any internet connection, even if they do not recognize that they are connected to a network, but not to the internet. I also noticed that I can not customize the settings of network similar to that of Windows 7 where you can choose between home and professional Public and also to manage network access points where you can merge or delete network locations.
OOOha, the process too big, I struggled very and solve the problem with the following solution:Just open space and restart services 'Internet connection sharing (ICS)"AFTER establishing VPN connectionor run the commands as administrator after HAVING establish VPN connectionstop SC SharedAccessSC start SharedAccessIt works for me.I don't understand what's wrong on Microsoft! -
Cisco ASA 5505 - capable to connect to VPN - access forbidden inside
Hello
I tried to set up a virtual private network for weeks, I can connect to the public IP address of the ASA, but I can't reach anything behind Cisco.
I give you my config:
ASA Version 8.2 (5)
!
host name asa
sarg domain name * .net
activate the encrypted password of Z4K16OvBr0J5Dj/2
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
DNS server-group DefaultDNS
domain sargicisco.net
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.254.0 255.255.255.240
Remote_Sargi_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
sheep - in extended access-list permit ip 192.168.1.0 255.255.255.0 192.168.254.0 255.255.255.0
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
mask 192.168.254.1 - 192.168.254.10 255.255.255.0 IP local pool SAVPN_Pool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
VPN-addr-assign local reuse / time 5
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
Wis field dhcpd * .net interface inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
allow inside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal Remote_Sargi group strategy
attributes of Group Policy Remote_Sargi
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Remote_Sargi_splitTunnelAcl
sargicisco.NET value by default-field
username kevin mz6JxJib/sQqvsw9 password encrypted privilege 0
username kevin attributes
VPN-group-policy DfltGrpPolicy
type tunnel-group SAVPN remote access
attributes global-tunnel-group SAVPN
address pool SAVPN_Pool
tunnel-group SAVPN webvpn-attributes
enable SAVPN group-alias
allow group-url https://82.228.XXX.XXX/SAVPN
type tunnel-group Remote_Sargi remote access
attributes global-tunnel-group Remote_Sargi
address pool SAVPN_Pool
Group Policy - by default-Remote_Sargi
IPSec-attributes tunnel-group Remote_Sargi
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:387a6e260247a545f4df0d3f28ba58c5
: endThank you
Hello
Could you remove this statement and add the last:
no nat (inside) 0-list of access inside_nat0_outbound
ADD: nat (inside) 0 access-list sheep - in
Kind regards
Aditya
Please evaluate the useful messages and mark the correct answers.
-
Cannot access any internal IPs when you are connected by VPN to ASA5505
Hello
I was able to configure VPN to work a bit on my ASA 5505. I can connect to the VPN and ping some IP addresses within the network. But some IPs don't react, I get "Request Timed Out"
For example:
10.10.0.4 - it works
10.10.0.5 - is not word
10.10.0.10 - it works
10.10.0.11 - it works
10.10.0.13 - does not workIf I ping from the network internally, all works well.
Does anyone have recommendations on how to address the issue?
VPN is the marking of the packages in a way that would trigger a firewall block?
It is the configuration of my ASA:
VPN with the name 'VPN-Remote' is the one I use.
ASA Version 9.2(2)4 ! hostname ciscoasa enable password NuLKvvWGg.x9HEKO encrypted passwd NuLKvvWGg.x9HEKO encrypted names ip local pool RA_VPN 10.10.1.1-10.10.1.255 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.10.0.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ipv6 enable ! boot system disk0:/asa922-4-k8.bin ftp mode passive clock timezone CST -6 clock summer-time CDT recurring same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network INSIDE-SUBNET object network sb-service-80 host 10.10.0.143 object network sbservicetest object network sb-service-443 host 10.10.0.143 object network dvr_web host 10.10.0.30 object service DVR-Tomcat_port service tcp source eq 8080 destination eq 8080 object network NETWORK_OBJ_10.10.1.0_24 subnet 10.10.1.0 255.255.255.0 object network dvr_mobile host 10.10.0.30 object service DVR-Mobile_port service tcp source eq 18004 destination eq 18004 object network WAN host 98.195.48.88 object service Web80 service tcp source eq www destination eq www object network NETWORK_OBJ_10.10.2.0_24 subnet 10.10.2.0 255.255.255.0 object network NETWORK_OBJ_10.10.0.0_24 subnet 10.10.0.0 255.255.255.0 object-group network sb-service network-object object sb-service-443 network-object object sb-service-80 object-group network DVR-service network-object object dvr_web network-object object dvr_mobile object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit icmp any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit icmp any any inactive access-list Outside_access_in extended permit tcp any object sb-service-80 eq www access-list Outside_access_in extended permit tcp any object sb-service-443 eq https log disable access-list Outside_access_in extended permit tcp any object dvr_web eq 8080 log disable access-list Outside_access_in extended permit tcp any object dvr_mobile eq 18004 log disable access-list Outside_access_in extended permit icmp any any time-exceeded access-list Outside_access_in extended permit icmp any any unreachable log warnings access-list Outside_access_in extended permit icmp any any echo-reply access-list Outside_access_in extended permit icmp any any source-quench access-list global_mpc extended permit ip any any access-list RA_VPN-ACL extended permit ip object NETWORK_OBJ_10.10.2.0_24 any access-list Remote-VPN_splitTunnelAcl standard permit 10.10.0.0 255.255.255.0 access-list AnyConnect_Client_Local_Print extended deny ip any4 any4 access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631 access-list AnyConnect_Client_Local_Print remark Windows' printing port access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100 access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353 access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355 access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137 access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns pager lines 24 logging enable logging asdm notifications no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside 10.10.0.111 2055 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-731.bin no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (any,any) source static NETWORK_OBJ_10.10.1.0_24 NETWORK_OBJ_10.10.1.0_24 ! object network obj_any nat (inside,outside) dynamic interface object network sb-service-80 nat (inside,outside) static interface no-proxy-arp service tcp www www object network sb-service-443 nat (inside,outside) static interface no-proxy-arp service tcp https https object network dvr_web nat (inside,outside) static interface no-proxy-arp service tcp 8080 8080 object network dvr_mobile nat (inside,outside) static interface no-proxy-arp service tcp 18004 18004 ! nat (inside,outside) after-auto source dynamic any interface inactive access-group inside_access_in in interface inside access-group Outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL http server enable http 10.10.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server group snmp_g v3 auth snmp-server user snmp_u snmp_g v3 encrypted auth md5 1d:1b:67:96:29:9b:5c:49:42:d5:a4:10:13:e0:b2:ee snmp-server host inside 10.10.0.111 community ***** version 2c no snmp-server location no snmp-server contact snmp-server community ***** crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA ESP-3DES-SHA ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-TRANS ESP-3DES-SHA-TRANS ESP-DES-SHA-TRANS crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0 enrollment self subject-name CN=10.10.0.1,CN=ciscoasa crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 certificate aa711054 308201af 30820159 a0030201 020204aa 71105430 0d06092a 864886f7 0d010105 0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a8648 86f70d01 09021608 63697363 6f617361 301e170d 31353035 32303230 34353137 5a170d32 35303531 37323034 3531375a 302c3111 300f0603 55040313 08636973 636f6173 61311730 1506092a 864886f7 0d010902 16086369 73636f61 7361305c 300d0609 2a864886 f70d0101 01050003 4b003048 024100bc 4278aeda 26601456 0e035bb5 6021adc5 0ac9149a 11d95e72 c5a8509b 514fd50d 7a86bdb3 a00bda84 4e6bda8d 50124c64 1179acc4 b2869092 9a742b52 f97c2302 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014d86a b4f1585d 7d93a0c7 7a1df9dd b37b0051 18aa301d 0603551d 0e041604 14d86ab4 f1585d7d 93a0c77a 1df9ddb3 7b005118 aa300d06 092a8648 86f70d01 01050500 034100a3 f0441214 1add483b 286fa44e 3844acce 27a68b2e 54f21dce 9a917783 1ab394f7 2d87e4d4 bcfcc7ef 6b26d604 bd0ea56f 05a72d0d 6c37413a b60216f3 612e0a quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside crypto ikev1 enable outside crypto ikev1 policy 10 authentication crack encryption aes-256 hash sha group 2 lifetime 86400 crypto ikev1 policy 20 authentication rsa-sig encryption aes-256 hash sha group 2 lifetime 86400 crypto ikev1 policy 30 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto ikev1 policy 40 authentication crack encryption aes-192 hash sha group 2 lifetime 86400 crypto ikev1 policy 50 authentication rsa-sig encryption aes-192 hash sha group 2 lifetime 86400 crypto ikev1 policy 60 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto ikev1 policy 70 authentication crack encryption aes hash sha group 2 lifetime 86400 crypto ikev1 policy 80 authentication rsa-sig encryption aes hash sha group 2 lifetime 86400 crypto ikev1 policy 90 authentication pre-share encryption aes hash sha group 2 lifetime 86400 crypto ikev1 policy 100 authentication crack encryption 3des hash sha group 2 lifetime 86400 crypto ikev1 policy 110 authentication rsa-sig encryption 3des hash sha group 2 lifetime 86400 crypto ikev1 policy 120 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto ikev1 policy 130 authentication crack encryption des hash sha group 2 lifetime 86400 crypto ikev1 policy 140 authentication rsa-sig encryption des hash sha group 2 lifetime 86400 crypto ikev1 policy 150 authentication pre-share encryption des hash sha group 2 lifetime 86400 telnet timeout 5 ssh stricthostkeycheck ssh 10.10.0.0 255.255.255.0 inside ssh timeout 5 ssh key-exchange group dh-group1-sha1 console timeout 0 no vpn-addr-assign dhcp dhcpd auto_config outside ! dhcpd address 10.10.0.5-10.10.0.254 inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 166.70.136.41 source outside ntp server 108.166.189.70 source outside ntp server 63.245.214.136 source outside ssl trust-point ASDM_Launcher_Access_TrustPoint_0 inside ssl trust-point ASDM_Launcher_Access_TrustPoint_0 inside vpnlb-ip webvpn enable outside group-policy DfltGrpPolicy attributes group-policy Remote-VPN internal group-policy Remote-VPN attributes dns-server value 10.10.0.201 8.8.8.8 vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Remote-VPN_splitTunnelAcl default-domain value local.prv username snmp_test password Ocwq862v84DTwooX encrypted username VPN_User password KgHsdRdYP0lAyeqPIXn51g== nt-encrypted privilege 15 tunnel-group DefaultRAGroup general-attributes address-pool RA_VPN tunnel-group DefaultRAGroup ipsec-attributes ikev1 pre-shared-key ***** tunnel-group Remote-VPN type remote-access tunnel-group Remote-VPN general-attributes address-pool RA_VPN default-group-policy Remote-VPN tunnel-group Remote-VPN ipsec-attributes ikev1 pre-shared-key ***** ! class-map global-class match access-list global_mpc class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect pptp inspect icmp inspect icmp error class global-class flow-export event-type all destination 10.10.0.111 ! service-policy global_policy global prompt hostname context no call-home reporting anonymous hpm topN enable Cryptochecksum:f249b6940d463cc987b9aa828d8d8282 : end
Hello
If please check windows or any of application firewall PC side. It's less likely the issue VPN or ASA.
HTH
Averroès.
-
IOS VPN will not respond to connections Cisco VPN Client.
Hi all
I'll put my routers fire here.
I have two 2921 SRI both with licenses of security concerning leased lines separated. I configured one to accept our workers to remote Client VPN Cisco VPN connections.
I have followed the set up process I used on another site with a router 1841/s and the same customers and I have also checked against the config given in the last guide of IOS15 EasyVPN.
With debugs all assets, all I see is
038062: 14:03:04.519 Dec 8: ISAKMP (0): received x.y.z.z dport-60225 Global (N) SA NEW 500 sport package
038063: 14:03:04.519 Dec 8: ISAKMP: created a struct peer x.y.z.z, peer port 60225
038064: 14:03:04.519 Dec 8: ISAKMP: new position created post = 0x3972090C peer_handle = 0x8001D881
038065: 14:03:04.523 Dec 8: ISAKMP: lock struct 0x3972090C, refcount 1 to peer crypto_isakmp_process_block
038066: 14:03:04.523 Dec 8: ISAKMP: (0): client setting Configuration parameters 3E156D70
038067: 14:03:10.027 Dec 8: ISAKMP (0): packet received x.y.z.z dport 500 sport 60225 Global (R) MM_NO_STATEHere is the abbreviated config.
System image file is "flash0:c2900 - universalk9-mz.» Spa. 154 - 1.T1.bin.
AAA new-model
!
!
AAA authentication login default local
local VPNAUTH AAA authentication login
AAA authorization exec default local
local authorization AAA VPN network
!
!
!
!
!
AAA - the id of the joint sessioncrypto ISAKMP policy 10
BA aes
preshared authentication
Group 14ISAKMP crypto group configuration of VPN client
key ****-****-****-****
DNS 192.168.177.207 192.168.177.3
xxx.local field
pool VPNADDRESSES
ACL REVERSEROUTECrypto ipsec transform-set aes - esp esp-sha-hmac HASH
tunnel modeProfile of crypto ipsec IPSECPROFILE
the HASH transform-set valuedynamic-map crypto VPN 1
the HASH transform-set value
market arriere-route
!
!
list of authentication of card crypto client VPN VPNAUTH
card crypto VPN VPN isakmp authorization list
crypto map VPN client configuration address respond
card crypto 65535-isakmp dynamic VPN ipsec VPN
!
!
local IP VPNADDRESSES 172.16.198.16 pool 172.16.198.31REVERSEROUTE extended IP access list
IP 192.168.0.0 allow 0.0.255.255 everything
Licensing ip 10.0.0.0 0.0.0.255 anyscope of IP-FIREWALL access list
2 allow any host a.b.c.d eq non500-isakmp udp
3 allow any host a.b.c.d eq isakmp udp
4 ahp permits any host a.b.c.d
5 esp of the permit any host a.b.c.dIf anyone can see anything wrong, I would be very happy and it would save the destruction of a seemingly innocent router.
Thank you
Paul
> I would be so happy and it would save the destruction of a seemingly innocent router.
No, which won't work! But instead of destroying the router, I can do it for you. Just send it to me... ;-)
OK, now more serious...
- The default Cisco IPSec client uses only DH group 2, while you set up the 14. Try to use Group 2 in your isakmp policy.
- You have your virtual model in place? She is not in the config.
-
How to limit the outbound connection PPTP VPN client
We have an ASA and inspect enable pptp. However, is there a way to allow pptp connections out of our LAN 192.168.0.0 to certain specific IP on the internet like 88.88.88.88 and 89.89.89.89 through ACL? Right now, users can connect to any VPN PPTP out as they see fit.
I tried with NAT with no luck
This is the error message I got before you inspect enable them pptp.
3. July 3, 2007 13:36:33 | 305006: failure of the regular creation of translation for the internal protocol 47 CBC: 192.168.1.199 outside dst: 66.201.201.207
and this is our config (previously inspect pptp):
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
ExchangeOWA tcp service object-group
Description Exchange Web and Mobile Access
EQ smtp port object
EQ object of the https port
port-object eq www
inside_nat0_outbound list of allowed ip extended access any 192.168.100.0 255.255.255.192
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.123.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.222.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.111.0 255.255.255.0
access-list extended dzm ip allowed any one
access-list extended dzm permit icmp any one
list of external extended ip access allowed a whole
cont_in list extended access permit ip host 66.66.66.135 all
access list outside extended permit tcp any host 66.66.66.133 object - group ExchangeOWA
list of extended outside access permit tcp any host 66.66.66.137 eq pptp
outside allowed extended access will list any host 66.66.66.137
access list outside extended permit icmp any any echo response
permit outside_cryptomap_20 to access extended list ip 192.168.0.0 255.255.0.0 192.168.123.0 255.255.255.0
Split_tunnel_ACL list standard access allowed 192.168.0.0 255.255.0.0
outside_cryptomap_80 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.111.0 255.255.255.0
outside_cryptomap_60 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.222.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
mask of 192.168.100.1 - local 192.168.100.50 BBBB-pool IP 255.255.255.0
ICMP allow all outside
ICMP allow any inside
ASDM image disk0: / asdm512 - k8.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global interface 10 (external)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 0.0.0.0 0.0.0.0
static (inside, outside) 66.66.66.133 tcp smtp 192.168.1.16 smtp netmask 255.255.255.255
static (inside, outside) tcp 66.66.66.133 www 192.168.1.16 www netmask 255.255.255.255
static (inside, outside) 66.66.66.133 tcp https 192.168.1.16 https netmask 255.255.255.255
public static 66.66.66.134 (Interior, exterior) 172.30.1.50 netmask 255.255.255.255
public static 66.66.66.137 (Interior, exterior) 192.168.1.10 netmask 255.255.255.255
outside access-group in external interface
Route outside 0.0.0.0 0.0.0.0 66.66.66.129 1
Route inside 192.168.1.0 255.255.255.0 192.168.10.2 1
Route inside 172.30.1.0 255.255.255.0 192.168.10.2 1
Route inside 172.20.20.0 255.255.255.0 192.168.10.2 1
Route inside 192.168.101.0 255.255.255.0 192.168.10.2 1
Route inside 192.168.102.0 255.255.255.0 192.168.10.2 1
Route inside 192.168.103.0 255.255.255.0 192.168.10.2 1
Route inside 192.168.106.0 255.255.255.0 192.168.10.2 1
Route inside 192.168.6.0 255.255.255.0 192.168.10.2 1
Route inside 192.168.3.0 255.255.255.0 192.168.10.2 1
Route inside 192.168.2.0 255.255.255.0 192.168.10.2 1
Timeout xlate 03:00
If you added the acl exactly as it appears above, it would not need to specifically allow http and https as the 2nd to last line is to allow an entire ip.
-
Cannot connect to internet after connecting to VPN Cisco ASA 5505
Hi all
I am an engineer of network, but haven't had any Experinece in the firewall for the moment, I'm under pressure to take care of a ASA 5505 were all VPN and incoming and out of bounds have been set up, recently I've had a few changes and re made the change, but unfortunately, he took some configurations that are ment for VPN now I am facing a problem,
VPN connection, but impossible to navigate on the internet is my problem, I tried inheriting tunneli Split, but I coudnt get through it seems, I did something in a bad way, I use here for most ASDM,.
I paste the Configuration for the investigation, although he's trying to help me.
ASA Version 8.0(4)16 ! hostname yantraind domain-name yantra.intra enable password vD1.re9JLbigXJxz encrypted passwd hVjSWvtgvNN21M./ encrypted names ! interface Vlan2 nameif outside security-level 0 ip address Outside_Interface 255.255.255.240 ospf cost 10 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 2 ! interface Ethernet0/6 switchport access vlan 2 shutdown ! interface Ethernet0/7 switchport access vlan 2 shutdown ! boot system disk0:/asa804-16-k8.bin boot system disk0:/asa724-k8.bin ftp mode passive clock timezone GMT 0 dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 192.168.0.106 name-server 192.168.0.10 domain-name yantra.intra same-security-traffic permit intra-interface object-group service Email_In tcp port-object eq https port-object eq pop3 port-object eq smtp object-group service DM_INLINE_TCP_2 tcp port-object eq ftp port-object eq ftp-data port-object eq www object-group service RDP tcp port-object eq 3389 object-group service DM_INLINE_SERVICE_1 service-object icmp service-object icmp traceroute object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service voip udp port-object eq domain object-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data access-list outside_access_in extended permit tcp any host object-group Email_In access-list outside_access_in extended permit tcp any host FTP_Server_Ext object-group DM_INLINE_TCP_1 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit tcp any host ForSLT eq www access-list outside_access_in extended permit tcp any host Search object-group DM_INLINE_TCP_2 access-list outside_access_in extended permit tcp any host IMIPublic eq www access-list outside_access_in extended permit tcp any host eq www access-list outside_access_in extended permit tcp any host SLT_New_Public eq www access-list outside_access_in extended permit object-group TCPUDP any host 202.133.48.68 eq www access-list rvpn_stunnel standard permit 192.168.0.0 255.255.255.0 access-list rvpn_stunnel standard permit 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list nat0 extended permit ip host IT_DIRECT 192.168.0.0 255.255.255.0 access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended deny object-group TCPUDP host 192.168.0.252 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console debugging logging buffered debugging logging trap debugging logging history emergencies logging asdm debugging logging host inside 192.168.0.187 logging permit-hostdown logging class ip buffered emergencies mtu inside 1500 mtu outside 1500 ip local pool rvpn-ip 192.168.100.1-192.168.100.25 mask 255.255.255.0 ip verify reverse-path interface inside ip verify reverse-path interface outside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any traceroute outside asdm image disk0:/asdm-61551.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list nat0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) netmask 255.255.255.255 dns static (inside,outside) FTP_Server_Ext FTP_Server_Int netmask 255.255.255.255 dns static (inside,outside) ForSLT SLT_New netmask 255.255.255.255 static (inside,outside) Search LocalSearch netmask 255.255.255.255 static (inside,outside) IMIPublic IMI netmask 255.255.255.255 static (inside,outside) SLT_New_Public SLT_Local netmask 255.255.255.255 static (inside,outside) netmask 255.255.255.255 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 202.133.48.65 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication http console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map rvpn_map 65535 set pfs crypto dynamic-map rvpn_map 65535 set transform-set ESP-3DES-SHA crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map 2 match address outside_cryptomap crypto map outside_map 2 set pfs crypto map outside_map 2 set peer crypto map outside_map 2 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic rvpn_map crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=yantraind proxy-ldc-issuer crl configure crypto ca server shutdown crypto ca certificate chain ASDM_TrustPoint0 certificate f8684749 30820252 308201bb a0030201 020204f8 68474930 0d06092a 864886f7 0d010104 0500303b 31123010 06035504 03130979 616e7472 61696e64 31253023 06092a86 4886f70d 01090216 1679616e 74726169 6e642e79 616e7472 612e696e 74726130 1e170d30 38313231 36303833 3831365a 170d3138 31323134 30383338 31365a30 3b311230 10060355 04031309 79616e74 7261696e 64312530 2306092a 864886f7 0d010902 16167961 6e747261 696e642e 79616e74 72612e69 6e747261 30819f30 0d06092a 864886f7 0d010101 05000381 8d003081 89028181 00f6d1d0 d536624d de9e4a2e 215a3986 98087e65 be9f6c0f b8f6dc3e 151c5603 21afdebe 85b2917b 297b1d1c b3abf5c6 628afbbe dda1ca27 01282aff 6514f62f 2965c87c 8aab0273 ab59dac6 aa9f549b 846d93fd 44c7f84f b29545bb d0db8bbb 060dfbbf 592a15e3 3db126be 541003c4 38754847 0b472e62 d092fec2 d556f9e3 09020301 0001a363 3061300f 0603551d 130101ff 04053003 0101ff30 0e060355 1d0f0101 ff040403 02018630 1f060355 1d230418 30168014 9f66b685 2ebf0d5a 97a684ba 9a9518ca a8ed637e 301d0603 551d0e04 1604149f 66b6852e bf0d5a97 a684ba9a 9518caa8 ed637e30 0d06092a 864886f7 0d010104 05000381 81003b49 2a7ee503 79b47792 6ce90453 70cf200e 943eccd7 deab53e0 2348d566 fe6aa8e0 302b922c 12df802d 398674f3 b1bc55f2 fe2646d5 c59689c2 c6693b0f 14081661 bafb233b 1b296708 fc2b6cbb ba1a005e 37073d72 4156b582 4521e673 ba6c7f7d 2d6941c4 9e076c39 73de21b9 712f69ed 7aab4bda 365d7eb3 39c05d27 e2dd quit crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 15 ssh version 2 console timeout 0 dhcpd address 192.168.0.126-192.168.0.150 inside dhcpd dns 192.168.0.106 192.168.0.10 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 webvpn group-policy DfltGrpPolicy attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-dns value 192.168.0.106 group-policy rvpn internal group-policy rvpn attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value rvpn_stunnel default-domain value yantra.intra username rreddy password 6p4HjBmf02hqbnrL encrypted privilege 15 username bsai password 41f5/8EINw6VQ5Os encrypted username bsai attributes service-type remote-access username Telnet password U.eMKTkIYZQA83Al encrypted privilege 15 username prashantt password BdrzfvDcOsnHBIdz encrypted username prashantt attributes service-type remote-access username m.shiva password p5YdC3kTJcnceaT/ encrypted username m.shiva attributes service-type remote-access username Senthil password qKYIiJ9NmC8NYvCA encrypted username Senthil attributes service-type remote-access username agupta password p3slrWEH1ye5/P2u encrypted username agupta attributes service-type remote-access username Yogesh password uQ3pfHI2wLvg8B8. encrypted username Yogesh attributes service-type remote-access username phanik password inZN0zXToeeR9bx. encrypted username phanik attributes service-type remote-access username murali password Ckpxwzhdj5RRu2tF encrypted privilege 15 username mgopi password stAEoJodb2CfgruZ encrypted privilege 15 username bill password Z1KSXIEPQkLN3OdQ encrypted username bill attributes service-type remote-access username Shantala password aCvfO5/PcsZc3Z5S encrypted username Shantala attributes service-type remote-access username maheshm password Fry56.leIsT9VHsv encrypted username maheshm attributes service-type remote-access username dhanj password zotUI9D6WWrMAh8T encrypted username dhanj attributes service-type remote-access username npatel password vOfMuOZg0vSkICyF encrypted username npatel attributes service-type remote-access username bmandakini password Y5UZuahgr6vd6ccE encrypted username bmandakini attributes service-type remote-access tunnel-group rvpn type remote-access tunnel-group rvpn general-attributes address-pool rvpn-ip tunnel-group rvpn ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group ipsec-attributes pre-shared-key * ! class-map global-class match default-inspection-traffic class-map inspection_default ! ! policy-map global_policy policy-map global-policy class global-class inspect esmtp inspect sip inspect pptp inspect ftp inspect ipsec-pass-thru ! service-policy global-policy global prompt hostname context Cryptochecksum:7042504fefd0d22ce4de7f6fa4da14fa : end
Thanking you in advance
Hello
If you want to have Split-tunnelin in use. One you have patterns for.
Then you will need to fix the configured "private group policy" under the "tunnel - private-group
tunnel-group private general-attributes
strategy - by default-private group
Then reconnect the VPN Client connection and try again.
After that the VPN Client connection only transmits traffic directed to the LAN on the VPN Client connection and all Internet traffic beyond the VPN connection directly to the Internet through the current connection of the users.
-Jouni
-
I want to connect via VPN on multiple networks
Secure VPN connection is finished locallyby the customer. Reason 412. The distance peerisno more answer.
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Maybe you are looking for
-
Disappeared from the sidebar of the Finder. Where at - it go?
On my MacBook, I'll see something like this in the sidebar of Finder - a new feature in El Capitan. Three options will usually appear in the sidebar of the Finder, and they look like this: However, on my iMac, the Finder sidebar has disappeared for s
-
laptop Compaq 610. .downgrade for xp from win 7. .drivers to install... pls help?
-
Pavilion p206tx: AccelerometerSt.exe - system error
Mr President I have a p206tx that is poping up on my screen like ACCELEROMETER ST. EXE-SYSTEM ERROR. which I tried to uninstalling the program from my lappy. Kindly help me on this problem.
-
Disable bios shadowing in vista
I have a 5100 Savior. I got a blue screen saying I could disable the BIOS memory. such as cache or shadoweing. I hnoe how to get therem I have just impossible to find the implementation of cache or occultation.
-
When I play a DVD in Windows Vista, I get all the sounds, but talk of the actors!
Then, when I play a DVD I can hear music, background noise, etc. but I can't hear what the actors and actresses. It's like I hear some audio tapes, but not the actual conversation between actors! Help, please. This is true for all DVDs