6009 USB + encoder Lika I41 - how to connect?

Similar Questions

• How to connect incremental encoder to NI9411?

  Hello
   
  I need to connect an incremental encoder to a NOR-9411 digital input on a chassis cRIO module to use for high-speed triggering.  I'm having trouble to know how to connect the wires needed to the encoder until the 9411 correctly.

  The son of transport the following signals:
   
  A red
  B Green
  Z Brown
  + V blue
  OV-Orange

  I'm fairly inexperienced with the connection of the sensors to LabVIEW gear, then please let me know if I can provide more information on my installation.

  In addition, attached is the datasheet for the encoder.

  Thank you very much!

  Alex

  Hi Byrd,

  Thanks for the post and I hope that your well today.

  I'm afraid I'm not totally sure what is your problem.

  The NI 9411 manual can be found here: for additional reading.

  The manual explains how to connect unbalanced devices on the 9411.

  page 12:

  "An example of asymmetrical device is an asymmetrical encoder. Connect each of the encoder signals (phase A, phase B, and)
  the index) to one of the pins in a pair of pins of DI. Figure 5 shows the connections for an asymmetrical encoder. »

  In labVIEW, you can then create a DAQmx task to read all digital lines.

  Hope this helps to get started you,

• How I connect my computer thrown up a port usb video cable to my tv

  How to connect my computer to my TV with a usb cable to video?

  Hello

  Follow the steps in this link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Good luck.

• Learn how to connect to internet from pc to mobile phone with a usb cable

  I want to know how to connect to internet from pc to mobile phone with a USB cable

  'S called it tethering.

  1. Search for this term in the manual of your phone.
  2. Search for this term in the contract of your phone network operator because not all telephone network operators allow tethering.

• How to connect a mouse arc with transceiver bluetooth built-in internal instead of the packed original microsoft usb one?

  I looked all over the web, has not found an article about it? How to connect mouse arc ms via a built-in instead of the original ms one usb bluetooth transmitter/receiver? It is important to make it work without a usb transceiver, thank you. Help, please...

  --------------------------------------
  PC: Intel Centrino Wireless Bluetooth (r) 3.0 + high speed adapter with emulator bt ms can be seen in the Device Manager. (and OD)
  material: ms arc mouse.
  --------------------------------------
  PS: mouse already works with transceiver dual ms in my computer and installed the intellipoint software.

  I think that most 'Arc' mouse are not the Bluetooth mouse.  BlueTrack is the mouse "signals" used to move the mouse cursor.  It is not Bluetooth

• How to connect my HP 2000 laptop with a usb/av cable to my TV?

  How to connect my HP 2000 laptop with a usb/av cable to my TV?

  Use an HDMI cable, if your laptop has this feature.  If this is not the case, use an RGB cable.  With the RGB cable, you will get video but no audio.

  Good luck.

• How to connect my LaserJet 4500 to USB on new HP Pavilion Elite desktop 9517

  I have a new desktop Pavilion Elite M9517-c and you want to continue to use my hp laserJet 4500 color laser printer that has no USB connectivity.  Can you recommend a printer with a USB cable so that I can connect these two? Is this possible?  The printer is in great shape! Thanks for your response in advance

  My God, you're right it isn't the adapter, you need, sorry, here check this link

  http://www.emtcompany.com/catagories/USB-to-parallel-adapters.htm?gclid=CISz2-n2m5kCFRwDagodTU5aCw or

  This one

  http://www.cablewholesale.com/cgi-bin/googletrack.cgi?URL=/catalog/usbadaptors.htm&gclid=CKSK9qP3m5kCFSMSagodPAaICw

• How to connect a controller xbox 360 vista home Premium?

  I can't find any software or instrution that allow me to use a gamepad xbox on my computer and how to connect to games like cod 4 as well?

  Hello

  Microsoft hardware http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx?pid=091 How to use an Xbox controller as a PC USB game controller http://www.OCModShop.com/default.aspx?a=223

  Concerning

• How to connect an Acer A200 tablet to my network

  I am using windows 7 Home Edition IE9 on a HP laptop, I created a homegroup before, but even with password and encryption other foreigners have been able to take the remote control of my laptop, no help from my isp server, we get only light high speed here then I mounted all wired.

  Now I have a new tablet, but no idea how to connect without going wireless, I don't want to do.

  using a modem/router combo, how do I connect to my Tablet and I phone without having to go wireless, my ISP server says high speed light is not sure and just as slow as dial-up and claims to have no idea of how to set them up, the Acer support is not good.

  all the ideas of everybody, thank you

  I am using windows 7 Home Edition IE9 on a HP laptop, I created a homegroup before, but even with password and encryption other foreigners have been able to take the remote control of my laptop, no help from my isp server, we get only light high speed here then I mounted all wired.

  Now I have a new tablet, but no idea how to connect without going wireless, I don't want to do.

  using a modem/router combo, how do I connect to my Tablet and I phone without having to go wireless, my ISP server says high speed light is not sure and just as slow as dial-up and claims to have no idea of how to set them up, the Acer support is not good.

  all the ideas of everybody, thank you

  Unless your tablet has a cable plug and/or you use a USB to Ethernet adapter or something similar - you do not use wired ethernet.

  Looks like you got other issues more just your Internet and others.

  First - get a decent router to go between you and the rest of the world.  The router allows separate you from other people using the same Internet Service as you have - you end up controlling the network across this competely router.  Make sure you change the router password to something good (15 + characters including at least three of the four sets of following characters: uppercase letters, lowercase letters, numbers, and symbols) and if it's a wireless router and you want to use - WPA2 with a different password in the router password itself which follows the same rules already given for a good password.

  Once you have - you could probably go wireless with confidence - as long as you follow a few other common sense computing ideas.  All your accounts them should have passwords that follow the same rules already given.  Ditto for your online accounts - each of them must be changed to follow as closely as possible the rules.  You can find some web pages does not allow the 15 characters - at least try to stick with three of the four types of characters on these sites.  Make sure you have your firewall enabled on your systems - no exceptions on the firewall settings.  No third-party remote software installed if you don't need (TeamViewer, LogMeIn, etc).  A good antivirus installed software.  A good antimalware software installed (no - software antivirus and anti-malware are * still * not the same thing at the moment.)  Keep both of these updates - automatically.  Don't install things randomly on the Internet.  Do not open attachments to emails, you don't trust - and even if you do not trust - scan the attachments first.  Even with Instant Messaging.

  The thing about cipher - other than to protect individual files, that you send through the Internet or to protect some files that you saved to the local system from prying eyes if they get on the local system with an account other than your (depending on your configuration) - which may not help the less than the world.

• Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Using a usb to hdmi cable can I connect my TouchSmart 600 computer to my TV without damaging my PC?

  Suzanne,

  With the help of a video-to-USB device like the EVGA UV plus + 19 will not damage your computer or HDTV. The EVGA UV + 19 more is an active device and is not just a passive cable. To the best of my knowledge, there is no passive cable which will convert the USB ports in HDMI ports.

  Frank

• How to connect his computer without HDM to Toshiba 40LV933G

  Hello

  I have a Dimension 5150 desctop computer and want to connect to my Toshiba 40LV933G TV.

  The computer has no HDMI output.
  I am able to get the help of VGA video cables.

  But I'm not able to get sound.
  I tried Mini RCA cable but still no sound. (cables are fine, I checked it on the installer of my friend).

  Mini is it to RCA installation cable supported in the 40LV933G of Toshiba?

  Any ideas?

  Thanks in advance.

  Hello

  First, he must know that VGA port (on your computer) does not transmit the audio signal. The VGA (RGB) port supports only the video signal.
  So if you wish to receive the sound on your TV, you must connect an additional audio cable Y from a port like jack SPDIF or headphones to your computer audio output to the TV audio IN (L, R) port.

  Find a TV manual where you can check how to connect an external equipment:
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/LV933-3240-English-specific.PDF

• M553DN: How to connect printer Laserjet M553DN to Wifi? -(Jetdirect accessory 3000w is already installed)

  Any help is appreciated.

  This printer was designed to be connected to the internet via WIFI.  The printer is not close to a LAN to be connected via a network cable.

  I bought the JetDirect 3000w accessory to allow the printer to have wireless connectivity.  The JetDirect 3000w accessorry is physically installed and I've activated 'Wireless Direct' via the control panel of the printer.  But I can't understand how to connect the printer to the WiFi.

  I looked everywhere in the network printer Panel, safety etc. but can not find the place where or how to connect the printer to the Wifi using Direct wireless.

  Any help is trully appreciated.  Thank you.

  Hello

  The Jetdirect 3000w feature:

  http://WWW8.HP.com/us/en/products/print-servers/product-detail.html?OID=8362161#! tab features =

  It will not connect your printer to your wireless network because it only deploys wireless direct printing. And it looks like you can only configure to use direct printing:

  http://support.HP.com/us-en/document/c04762612

  Kind regards.

• How to connect multiple external monitors to Portege R830

  Anyone has any advice on how to connect more than one external monitor to a Portege R830?

  I have a monitor through the station home, but when I attach a second monitor to the port of the laptop do not recognize at all.

  It is used to work on my old Portege, but for some reason not on the R830.

  Any tips or advice?

  Hello

  You use the same port in the docking station and Portege R830?
  Docking station replica ports in order to use the Portege docking station port or port.

  If you want to connect more than one external monitor to the laptop then I would recommend using something like Toshiba Dynadock
  http://us.Toshiba.com/computers/accessories/dynadock/

  Welcome them

• Satellite M40X-189: how to connect RGB port to port RS232?

  Hello
  as you know the satellite M40X - 189 P - M 730/XP has a port monitor RGP and doesn't have a RS232 port.
  I work with device of automatic titration requiring the RS232 port for connection!
  No idea how I can connect my laptop on this unit!

  pls help
  Thank you
  Omrankl

  Hello

  AFAIK the RS-232 port is a serial port and I don t think that it of possible to connect the RGB port to the RS232 port.
  But I found the site useful:
  http://www.Ontrak.NET/USB.htm

  You will find a description how to connect the USB port to an RS-232 port.
  You need an interface ADU.
  Click on the link.

• HP 19-2113w: how to connect HP 19-2113w tv HDMI

  I am looking for directions on how to connect my HP 19-2113w to my TV via HDMI.  Could someone guide me please? Thank you!

  I don't know if there is a feature that makes these two functions at the same time, should be two devices, the USB adapter to HDMI for the video of all-in-one on television, another would be a digital TV Tuner.