6300 pro, XP & AHCI

Similar Questions

• HP 6300 Pro SFF stops unexpectedly

  I have a question involving a HP 6300 Pro SFF that has been repeatedly and intermittently closing, although several major components were replaced and the PC has been reimagee.  I wonder what I missed and am looking for advice on what to try next.  Through independent and one-at-a-time technician, we replaced the motherboard, RAM modules, the hard drive and power supply.  I ordered but not yet installed a replacement CPU, even if it tests the 'good' through the latest UEFI.   Interesting thing about the trial of the UEFI for the motherboard, verification of jury system says "Device not found", but goes in the log file.  This result occurred in the original and the replacement motherboard.  I also restored to the course in ways that we don't normally do, replacing the mouse, keyboard, AC, the power surge suppressor cable, moved the PC to another place, I tried different taken CA, put it on a UPS or not, clean the CPU and reapply the thermal paste, the relocation of the RAM, etc.  We have several thousand of these units in our company and just this Wednesday, we received another call on another site where a Pro SFF 6300 has been shut unexpectedly on the client.  We have immediately made by the Distributor OEM for my machine to fix through the process responsible for itself and that's what I tried to do, but in this case the most recent I sent as a return to the Distributor OEM for analysis or investigation.  I have not had a technician HP come on site or called HP support, but this will be the final step available to us if the replacement of the CPU also fails.  Any suggestions?

  Thank you

  Mike

  It is the CPU...

  The bad CPU after 100 iterations with success.  Beware of the hard locks!

• HP Compaq 6200 Pro SFF: Latch door stuck on 6200/6300 Pro SFF

  I don't know what my users to my machines, but I received (especially 6200/6300 Pro SFF) computers that I can't open the latch to release for the sidebar being stuck. When I pull the latch, the rear of the frame folds inward and the latch will not release. Someone has any advice on how to unlock these?

  The best answer I got from another forum is to shoot the main part of the case (pliers with tapered beak hanging in the locking ring got me the best results) while lifting simultaneously the release handle on the side panel. Not 100% effective, but he did unlock about 90% of my problem machines.

• Compaq SFF 6300 Pro: upgrade my power supply

  Hey HP gurus, receive recommendations for a more powerful PS for my box? I am wanting to update my video card for some games, and I know that the processor will handle it, but I'm running in issues of power with all the cards in the correct performance.

  You can see that it's a totally weird owner PSU (point 2):

  

  I think it's old thread answers your question fully:

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/video-card-for-HP-Compaq-Pro-6300-small-form-factor-PC/TD-p/6183611#.VK2G0ivF_OM

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• XP Pro SP3 + AHCI Recovery Console

  Hello

  I spent the better part of 2 days crawling to these forums and others looking for an answer to this simple question:

  I have XP Pro SP3 pc on which once install the CMDCONS Recovery Console, the machine BSOD with an 0X0000007B stop Code when you try to access the Recovery Console. Normal Windows always starts very well.

  I know without doubt that this is caused by the likely AHCI drivers being does not natively part of installing Windows CMDCONS.

  I do not wish to have the BIOS changed mode Legacy or IDE, and providing the drivers via disk w / the F6 option is so archaic that it's really sad.

  Can someone tell me please how to enter AHCI support in the Recovery Console, so it can run just as it should?

  Thank you
  Rev

  It's sad to use floppy disks.

  Maybe this story/article will help you:

  http://www.howtofixcomputers.com/forums/Windows-XP/Recovery-Console-crashes-191414.html

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony! Everybody don't like Raymond.

• HP Compaq Pro 6300 format microtour: install wifi on Compaq 6300 pro PCIe

  Hello

  I have the workstation above, mintioned [personal information deleted] serial number / product BOF58ET #UUZ number

  I need to install the Intel 8260 802.11 wifi a/b/g/n/ac and card PCIe BT

  http://store.HP.com/SwitzerlandStore/merch/product.aspx?ID=N0S95AA&opt=&SEL=def

  but the problem, it is show that this is for HP Z workstation,

  I need to be sure before you buy the part, that it will work with my computer

  I have 1 PCIe slot * avilable

  Thank you

  It is unlikely to work because you will probably need to install a wifi x 1 low-profile PCIe card (low profile).

  The wifi card, on which you are curious is full height and it will not be enough space in you case of OC.

• Pavilion 6300 pro: 6300 pro sff

  I want to improve my cpu. Now intel i3 3220 - would install i5 or i7 image. Any suggestions?

  Compatible processors in option are listed with part number and identifiers of Intel on the HP thfollowing web document. See page 2

  There are a lot of i5 and 17 central units choose pleasure. Happy update!

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5232881&docid=emr_na-c04034560&docLocale=en_US

• Start-up network on HP Compaq Pro SFF 6300 problems

  We use LANDesk Management following the image of our machines when they arrive.  We have just received a new shipment of 6300 Pro and we are unable to get them PXE had.  I'm unfortunately not on the site with workstations.  We get a server timeout of response time when network boot. Technicians are invited to select IPv4 or IPv6.  After selecting the IPv4, it displays:

  Check for the presence of media

  Media present

  On IPv4 PXE boot

  Then the computer starts Windows 8 Image of HP.   We have not had this problem with any other Pro 6300 in our environment.  What needs to be changed in the configuration of the BIOS for it to perform a PXE boot correctly again.

  HP Compaq Pro 6300

  BIOS: 2.85

  Found the fix.
  In the BIOS-> Security-> start secure Configuration-> Legacy Support = on
  Secure Boot = disabled

• HP Compaq Pro 6300 all-in - One desktop PC Touch Panel does not

  I have a new HP Compaq 6300 Pro all-in-one desktop PC. It came with Windows 7 32 bit preinstalled, but I wanted to Win 7 64 bit so I had to do a clean install and therefore lost all my drivers.

  I was able to get most of the drivers I need HP driver download page for my specific model, but the touch screen under the screen no longer works. It certainly worked until I changed the operating system. To clarify, this is a sign of close contact under the screen that allows you to mute sound, change the volume or change the brightness. The control panel items are invisible until you touch it, how the options - this feature still works. They light up, but do nothing for the levels of noise or the brightness.

  I don't know much about the drivers, but this seems to be a driver for me problem. Does anyone have any ideas on how I could get the touch screen works again, because it is an interesting possibility, I'd like to be able to use.

  Thanks in advance.

  Hey, no one has responded to my request, but just Serendipity led me to the solution, so I'll post it here in case someone else has the same problem.

  In his search for information about installing additional RAM memory, I found myself in the correct name of the touch screen, I had a problem with: capacitive controls, aka buttons capsense. Once I got the correct term was a few seconds before I got the solution, see:

  HP all-in-one control panel Button for Windows Support

  According to the HP support page, the little softPaq provided "patches a question wherein Capsense buttons (mute, Mic, theft and theft down) of your computer do not work after manually installing a version of Windows", reinsert the necessary registry key.

  The softPaq (sp60481.exe) worked well for Windows 7 64 bit on my HP Compaq Pro 6300 all-in-one and I am very happy to have this cool touchscreen works again.

• Best graphics card for HP Compaq Pro 6500

  Model: HP Compaq 6500 Pro Compact
  Serial No.: XXXXXXXXX (for your safety, I deleted the serial number of your post above: this is the information that you probably don't want to make publicly available - Forum Moderator)
  Product #: SK557UC #ABA
  OS: Windows 7 Home Preimium
  
  So I got this computer by a neighbour who has moved recently. He went about its appearance and shape in big enough but its alittle outdated. especially I would like to know what type of graphics card is best for this computer because it is a type of SFF.
  
  I would also like to know bonus how much GB of memory, I can max this out at?
  
  Thanks for the help.

  Hello:

  I would recommend the Radeon HD 6450 low profile card with low profile mounting support for this model, which, incidentally, is a 6005 pro, not a Pro 6500.

  HP is currently only 6300 Pro Series competition.

  Personally, I like the fanless models but in a SFF case, according to me, that you really do need a fan to push the heat out of there more quickly that a passive heat sink can, but it's up to you.

  Woman with fan

  http://www.Newegg.com/product/product.aspx?item=N82E16814127584

  Elected without fan

  http://www.Newegg.com/product/product.aspx?item=N82E16814102933

  These video cards are optionally on the HP SFF equipments 6200 Pro that has the same 240 W P/S as yours.

  You can install up to 4 x 4 GB (16 GB) PC3-10600.  DDR3-1333 Mhz

  Here is the link to the quickspecs which will give you more info on your PC.

  http://h18000.www1.HP.com/products/QuickSpecs/13412_na/13412_na.PDF

• Activate the AHCI in Windows 8 / BIOS - HP Envy Sleekbook 6 - 1153eo

  Greetings,

  My computer:

  HP Envy Sleekbook 6 - 1153eo

  Windows 8 Pro

  AHCI is currently disabled on my computer and I want to get the best performance out of it. It can be enabled easily through the windows registry, but to get this to work I need to be sure that the AHCI is currently enabled in the BIOS as well. When I enter the BIOS it's not just all advanced options available, only the time and date and other bases. How can I know weather or not that AHCI is enabled in the BIOS? How can I access the advanced options in the BIOS to turn on the AHCI (if it is not already turned on, that is)?

  Thank you.

  Kind regards

  th0d

  Hello:

  The BIOS of HP notebooks of consumption made in recent years is already set to AHCI, and it cannot be changed to any other setting.

  In some models that offer two hard drives, the default value of the BIOS can be on the RAID.

  Computers to only HP business notebooks have a BIOS setting to change the controller in AHCI or IDE mode.

  Go to Device Manager and expand the IDE ATA/ATAPI controllers section and you should see a speed control that is listed as a SATA AHCI controller.

  In the case of AMD laptops, it can just be tagged as a SATA controller.

• On a displayport screen colors are washed out

  Hello

  I have a user who is running a HP Compaq SFF 6300 Pro and Windows 7 Pro, all of the latest patches.  We have set a second monitor to the display port using an adapter VGA DisplayPort cable / and the image is washed out.  Gray things clear looko on white look on the displayport VGA port.  I tried three different monitors, two HP L1911 and a L1910.  All look the same, washed on the displayport, but look good on the VGA port.

  I also tried two displayport different VGA adapters.  The adapters are HP DisplayPort / VGA adapters, p/n: 752661-001, recently purchased.

  Any suggestions?  We tried to play with the settings of the monitor, but he could not do better.  Are there settings in the system that I should try?  Different drivers maybe?

  Thanks in advance,

  Linn

  Resolved, I have think (?)... Talked to HP Technical Support and it turns out that the HP DisplayPort adapter we sold is not compatible with computers of model we have, go figure.  Never would have guessed that an adapter like this one could have problems of compatibility beyond the types of connector.

  Shot of an old adapter from a different computer on the same model and it is much better.

  Now wait on my seller to return to me on an Exchange.

  Linn

• U2414H DP 1.2 STD questions

  Hello

  I have exactly the same problem with 3 monitors U2414H.

  P25 User Guide:

  "To allow the connection of STDS, Please use only DP cable such as estimated in the box (or) other DP1.2 certified by cable and change the RFP DP1.2 setting by following the steps below:

  There is no DP > cable DP in the box, only a CDM > DP.

  Cable to connect the DP STD monitor shows the first image can be found in the RFP (NO CDM) of the first monitor.  (Which is the opposite of the connecting cable DisplayPort (Mini-DP DP) black P24)

  The PC is an HP 6300 Pro running an AMD Radeon HD card 7450 DP - it will not detect the monitor as having STD available.

  Do I have to go buy another RFP > RFP cable?

  rod_bunny,
  Our cable should suffice.

  In a monitor three DP MST parameters, only the first and the second monitor in the chain would be DP active 1.2 in the OSD.

  Computer monitor 1
  computer card video DP or CDM on--> monitor 1 DP or CDM in via the Dell mDP to DP cable

  Monitor 1 monitor 2
  Monitor 1 DP 1.2 MST on--> Dell DP to the CDM cable--> Monitor 2 CDM in

  Monitor 2 monitor 3
  Monitor 2 DP 1.2 MST on--> Dell DP to the CDM cable--> Monitor 3 CDM in

  Of course, this assumes that the video card and driver are compatible DP 1.2.

• No AHCI in the BIOS in Satellite Pro A200

  I just installed an ssd and would like to change the bios to ahci utility but it is not an area that I am able to do this. the computer is a Toshiba Satellite Pro A200 (psfa1a-003002).

  I have to update the BIOS? Where can I get the update and how can I update?

  As I know the BIOS update does not offer some additional options. Please check the settings of the BIOS again. In the BIOS options there SATA advanced option and there you can change between compatibility and AHCI mode.

  I have it on my P200. It is almost identical machine but 17 and your model 15.

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm