Pavilion 6300 pro: 6300 pro sff

Similar Questions

• HP 6300 Pro SFF stops unexpectedly

  I have a question involving a HP 6300 Pro SFF that has been repeatedly and intermittently closing, although several major components were replaced and the PC has been reimagee.  I wonder what I missed and am looking for advice on what to try next.  Through independent and one-at-a-time technician, we replaced the motherboard, RAM modules, the hard drive and power supply.  I ordered but not yet installed a replacement CPU, even if it tests the 'good' through the latest UEFI.   Interesting thing about the trial of the UEFI for the motherboard, verification of jury system says "Device not found", but goes in the log file.  This result occurred in the original and the replacement motherboard.  I also restored to the course in ways that we don't normally do, replacing the mouse, keyboard, AC, the power surge suppressor cable, moved the PC to another place, I tried different taken CA, put it on a UPS or not, clean the CPU and reapply the thermal paste, the relocation of the RAM, etc.  We have several thousand of these units in our company and just this Wednesday, we received another call on another site where a Pro SFF 6300 has been shut unexpectedly on the client.  We have immediately made by the Distributor OEM for my machine to fix through the process responsible for itself and that's what I tried to do, but in this case the most recent I sent as a return to the Distributor OEM for analysis or investigation.  I have not had a technician HP come on site or called HP support, but this will be the final step available to us if the replacement of the CPU also fails.  Any suggestions?

  Thank you

  Mike

  It is the CPU...

  The bad CPU after 100 iterations with success.  Beware of the hard locks!

• HP Compaq 6200 Pro SFF: Latch door stuck on 6200/6300 Pro SFF

  I don't know what my users to my machines, but I received (especially 6200/6300 Pro SFF) computers that I can't open the latch to release for the sidebar being stuck. When I pull the latch, the rear of the frame folds inward and the latch will not release. Someone has any advice on how to unlock these?

  The best answer I got from another forum is to shoot the main part of the case (pliers with tapered beak hanging in the locking ring got me the best results) while lifting simultaneously the release handle on the side panel. Not 100% effective, but he did unlock about 90% of my problem machines.

• Problem with the choice of screen update on HP Compaq Pro SFF 6300

  My HP Compaq Pro SFF 6300 continuously lists "HP Compaq Business Desktop System BIOS (BIOS K100)" as an element to be updated - even if I chose and installed this update several times.  What is going on?  Thanks for any help or information.

  Thanks for the additional information.  I'll follow your advice and simply ignore the request to update.  Leave well enough alone, given that the computer works well at the present time.  Once again, thank you.

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• HP compaq 6200 pro sff: drivers missing

  good day to all,

  help with the following missing drivers.

  controller Ethernet (hardware id);

  PCI\VEN_8086 & Dev_1502 & SUBSYS_1497 / 03C & REV_04

  Pci\Ven_8086 & Dev_1502 & SUBSYS_1497103C

  Pci\Ven_8086 & Dev_1502 & CC_020000

  Pci\Ven_8086 & Dev_1502 & CC_0200

  In addition,

  PCI simple communication controller

  SM bus controller

  PCI serial port.

  The PC is HP compaq 6200 pro sff

  Windows 7 pro 64-bit.

  Thank you.

  Hello:

  You need these drivers...

  SMBus:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_88640_1 & swEnvOid = 4059

  Simple PCI and PCI Serial Port:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_138955_1 & swEnvOid = 4059

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_108131_1 & swEnvOid = 4059 #tab1

• 6000 pro SFF: installing the video card on 6000 Pro SFF with BIOS 2.03

  I am in train to install a video card in my 6000 Pro SFF and find that when the new video card is inserted, neither she, nor my tip on video card working.

  Assuming that their must be a way to get the card to operate in the BIOS (2 786 v2.03), I'm going to the "Advanced" tab and find "PCI devices. Underside of the mentioned deviced is 'Controller VGA Intel'. Choice for this controller are the IRQ = 5, 10, 11, or disabled. Apparently, the default value is 5 because that's how it is now set.

  A little scared that if I put "Disabled", which will be not only the new video card does not work, but the video card on the motherboard won't work, too.

  Y at - it anyone out there that can tell me if you change the VGA Intel controller to disabled is the right way to install the new card, and that I only put my computer in a heavy paperweight by.

  You are welcome.  Thank you for the additional information.

  I don't think you have to do anything in the BIOS.  At least, I wouldn't do anything, until you have improved the PSU to see what is happening.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Compaq 6005 Pro SFF PC: use reference dell 531 parts s in my PC HP Compaq 6005 Pro SFF

  I try and speed up my computer, I have a computer dell 531 s this works (vista). Hard drive crashed. I was hopeing I could use something out of it. This is for my HP Compaq 6005 Pro SFF PC, SG972UC #ABA... Thank you... Mike

  Hello:

  Compare the specifications of the two models, it seems that the only thing you can use the hard drive, what said you was not good, so it does not work.

  The 6005 Pro uses different memory (DDR3) and 531's DDR2, which does not in a DDR3 slot.

  The 6005 uses another set of AMD processors and that of your 531 s will not work in the 6005 Pro.

• HP Compaq 6005 Pro SFF PC: RAM-I let crucial scan my system

  Crucial scan says I can use DDR3 PC3-14900 • CL = 13 • unbuffered NON - ECC DDR3-1866 • 1.35v • 512Meg x 64... My computer has DDR3 PC3-10600 (1333 MHz)... I thought I had to say with my ram support due to the mobo and cpu speed... SG972UC #ABA, HP Compaq 6005 Pro SFF PC...  I have the chance to buy faster ram if it will work. Thanks if you can help!

  The B97 is not listed on pg 2 illustrated parts Guide.

• Memory RAM replacement hp compaq 6200 pro sff

  I have hp compaq 6200 pro SFF, now has only 2 GB of RAM memory and I want to add more to it. where can I find what I need? I have a couple of old computers here, but need to know if I can use these memoirs RAM for this computer. I can't find it.

  Hello:

  Here is the link to the quickspecs for your model...

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04123261

  Info upgrade memory are on page 7.

  Note that you can install 4 x 8 GB PC3-10600 memory, even if the configuration table only 4 x 4 GB.

• Invalid electronic serial number after swapping out motherboard, HP Compaq 6200 Pro SFF

  Hello

  I have just replaced a motherboard under warranty and I try to find the utility to change S/N in the BIOS, have obtained a location for the equivalent laptop but can't find the PC version using a USB.

  I have CSN access, but cannot find the utility appropriate to effect the change.

  PC is:

  HP Compaq 6200 Pro SFF

  Any help would be appreciated.

  Thank you

  Darren

  [Personal information]

  Hello:

  Here's what you need to do... This model has no need to inventory number or serial number change utility...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• HP 6005 Pro SFF: Replace video card ATI Radeon HD 4200 graphics upgrade for HP 6005 Pro SFF

  I have a HP 6005 Pro SFF with a 240W PS, and I want to upgrade the video card.  It has an ATI Radeon HD 4200.    An HP Forum person (Paul Tikkanen) recommended an upgrade for a 6005 using a video card optional for the HP 6200 Pro SFF:

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439&cm_re=hd_6450-_-14-121-439-_-product

  Please confirm it also works for the 6005.  If I replace it, can I actually remove the Radeon 4200 and replace it directly at the space of the same card mother slot to save space of PCI Expansion slot, or do I use the expansion PCI Express 16 x slot?   If so, is the procedure for the direct replacement documented anywhere?

  Hello:

  The ATI Radeon HD 4200 Video on your PC is the graphics chip integrated according to page 14 of the quickspecs at the link below. In other words, the graphics card is a chip that is soldered to the motherboard.  It is not in an expansion slot.

  http://static.highspeedbackbone.NET/PDF/HP%20Compaq%206005%20PRO%20Business%20pc%20Quick%20Specs.PDF

  The dedicated PCI express x 16 slot should be empty now, and this is where you install the card I have recommended.

  I don't see why the HD 6450 work.  It works in the dc7800, dc7900, Pro 6000, 6200 pro, 8000 Elite, Elite 8100 and 8200 Elite business desktop PC.

  You just need to make sure that uninstall you the HD 4200 graphics card and the driver in Device Manager.  Also check the uninstalling the driver box.

  Also uninstall catalyst control center software in the Add/Remove programs in the control panel section, stop and disconnect the PC, install your new video card and the driver for the 6450.

  Here is the link to the service manual. See Chapter 2 pp 20-25 for the installation procedures card expansion, paying special attention to the info of PCIe x 16 slot.

  http://h10032.www1.HP.com/CTG/manual/c01870938

• HP 6200 Pro SFF i5 processor upgrade

  I'm looking to upgrade my HP 6200 Pro SFF CPU with an i5-2400 or i5-2500.

  Are all supported processors below?

  i5-2400

  i5-2400 s

  i5 - 2400 k

  i5-2500

  i5-2500 s

  i5 - 2500 k

  I don't know if the processors that ends in s or k are supported on the 6200.

  bocajoe wrote:

  I'm looking to upgrade my HP 6200 Pro SFF CPU with an i5-2400 or i5-2500.

  Are all supported processors below?

  i5-2400 Yes

  i5-2400 s none

  i5 - 2400 k none

  i5-2500 Yes

  i5-2500 s none

  i5 - 2500 k none

  I don't know if the processors that ends in s or k are supported on the 6200.

  See The optional Quickspecs CPU list here.

• HP Compaq 6000 PRO SFF: Need some drivers for this desktop computer

  Hello, I have a model # HP Compaq Desktop 6000 PRO SFF and I need drivers for it the following:

  PCI serial port

  PCI Simple Communications controller

  Trusted Platform Module 1.2

  Someone please help... Thank you

  You are the very welcome.

  You need this driver.  Install manually if auto installation does not work.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45367 .exe

• 6200 pro sff: 6200 pro sff and Radeon HD5450 works and I have to change the jumpers

  got myself a 6200 hp pro sff and have upgraded to win 10 and want to add pci card hdmi thought it would be a simplendrop in and go but not any quick tips to make work that I have to put a few riders in here

  Hello:

  A HD 5450 should have works great.

  The HD 6450 was the graphics card optionally available on the 6200 Pro SFF.

  There are no jumpers or BIOS settings to change.

  The card should have been automatically picked up by the BIOS, and it should have disabled the onboard video.

  What happens when you turn on the PC?

  It works and you don't have a video?

  If so, all you need to do is to remove the card, re - turning on the PC, uninstall the Intel HD graphics card and driver, turn off the PC and install the new video card.

  To uninstall the graphics card, go to Device Manager, click to expand the category of device adapter screen, right-click on the Intel HD graphics card, select uninstall and check the box uninstall driver.

  If this does not resolve the issue, most likely the card you purchased has a problem.

  Return it and get a HD 6450 low profile card.

• Impossible to replace the video card - Pavilion Elite Pro 410 t

  Hello

  I have a HP Pavilion Elite Pro 410t with an ATI Radeon to 2 GB video card (I think a 5770 or 5570). I'll call this map.

  About 2 weeks ago it started making a noise annoying (sounded like a fan problem).

  I have a spare, older, working NVidia card fanless (calling card B) and I swapped it in using the method indicated in the guide of the user/service.

  When I turn on the Pavilion, it gives 3 beeps and there is no display, so I think that it does not recognize the video card.

  I put the card back in and it works fine, except that the fan sounds bad and I'm not confident, it will last much longer.

  I put the B card in another PC (home built) and it works fine.

  I tried card B in the Pavilion, making sure it was well set and I get always three beeps.

  I even went in the Pavilion BIOS settings to see if there was an option. There is no setting to choose the video card, but there only PCI-E option. Since I'm still just on the PCI-E slot, I left it alone.

  So I have a work card (B), but it won't work in the Pavilion for a reason any. Has anyone seen this?

  If it's a compatibility issue, is there a specific list of cards that works with my system? Do I have to buy the replacement of HP only? HP offers even replacements of video card for sale?

  Thanks in advance for any help.

  Yes, okay.
  If you compare the PSU of the HP and the other PC (home built) - are there differences?
  Maybe you need more powerful or more efficient power supply?

  If you try the other power supply in your HP...?

  C.