Start-up network on HP Compaq Pro SFF 6300 problems

Similar Questions

• Problem with the choice of screen update on HP Compaq Pro SFF 6300

  My HP Compaq Pro SFF 6300 continuously lists "HP Compaq Business Desktop System BIOS (BIOS K100)" as an element to be updated - even if I chose and installed this update several times.  What is going on?  Thanks for any help or information.

  Thanks for the additional information.  I'll follow your advice and simply ignore the request to update.  Leave well enough alone, given that the computer works well at the present time.  Once again, thank you.

• HP Compaq Pro 6305 SFF (Windows 7 32-bit) - WMI - SetBIOSSetting-> generic failure

  When using WMI to configure the BIOS settings to boot the PC after the loss of power, I get generic failure when executing the measures on nine machines got us (HP Compaq Pro SFF 6305). This works very well on older machines (such as HP Compaq 6005 Pro SFF). On the two types of machines, I can run the following command:

  Get-WmiObject - computername [PCNAME] - space namespace root/hp/instrumentedbios - class hp_biosenumeration. where {$_.} Name - eq "after power loss"} | Format-Table name, value - autosize

  So I get something like "Off, * on, previous state" (in this case PC should start automatically when the machine is new).

  To change this setting, I'm using following command:

  (Get-WmiObject - computername [PCNAME] - space namespace root/hp/instrumentedbios - hp_biossettingInterface of the class). SetBiosSetting ("after the loss of power ', 'On' ')

  Works fine when HP 6005 [PCNAME], but fails (with generic failure [exact error below]), if I try to do on 6305 model.

  Exception call 'SetBIOSSetting': 'generic failure '.
  At line: 1 char: 125
  + (Get-WmiObject-ComputerName - wksp0002a416 - namespace root/hp/instrumentedbios - hp_biossettingInterface of the class). SetBiosSetting< ('after="" power="">
  + CategoryInfo: NotSpecified: ( [], MethodInvocationException)
  + FullyQualifiedErrorId: WMIMethodException

  In both cases who is not a 'read only' value (at least according to what turn WMI).

  Any idea will be highly appreciated.

  If anyone has the same problem, the reason was found.

  SetBiosSetting method takes 3 arguments (Name, Value, password). Password argument was optional on old machines. Of the nine, it is mandatory, so valid command would be:

  (Get-WmiObject - computername [PCNAME] - space namespace root/hp/instrumentedbios - hp_biossettingInterface of the class). SetBiosSetting ("after the loss of power ', 'On'," ")

• HP 6300 Pro SFF stops unexpectedly

  I have a question involving a HP 6300 Pro SFF that has been repeatedly and intermittently closing, although several major components were replaced and the PC has been reimagee.  I wonder what I missed and am looking for advice on what to try next.  Through independent and one-at-a-time technician, we replaced the motherboard, RAM modules, the hard drive and power supply.  I ordered but not yet installed a replacement CPU, even if it tests the 'good' through the latest UEFI.   Interesting thing about the trial of the UEFI for the motherboard, verification of jury system says "Device not found", but goes in the log file.  This result occurred in the original and the replacement motherboard.  I also restored to the course in ways that we don't normally do, replacing the mouse, keyboard, AC, the power surge suppressor cable, moved the PC to another place, I tried different taken CA, put it on a UPS or not, clean the CPU and reapply the thermal paste, the relocation of the RAM, etc.  We have several thousand of these units in our company and just this Wednesday, we received another call on another site where a Pro SFF 6300 has been shut unexpectedly on the client.  We have immediately made by the Distributor OEM for my machine to fix through the process responsible for itself and that's what I tried to do, but in this case the most recent I sent as a return to the Distributor OEM for analysis or investigation.  I have not had a technician HP come on site or called HP support, but this will be the final step available to us if the replacement of the CPU also fails.  Any suggestions?

  Thank you

  Mike

  It is the CPU...

  The bad CPU after 100 iterations with success.  Beware of the hard locks!

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• HP compaq 6200 pro sff: drivers missing

  good day to all,

  help with the following missing drivers.

  controller Ethernet (hardware id);

  PCI\VEN_8086 & Dev_1502 & SUBSYS_1497 / 03C & REV_04

  Pci\Ven_8086 & Dev_1502 & SUBSYS_1497103C

  Pci\Ven_8086 & Dev_1502 & CC_020000

  Pci\Ven_8086 & Dev_1502 & CC_0200

  In addition,

  PCI simple communication controller

  SM bus controller

  PCI serial port.

  The PC is HP compaq 6200 pro sff

  Windows 7 pro 64-bit.

  Thank you.

  Hello:

  You need these drivers...

  SMBus:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_88640_1 & swEnvOid = 4059

  Simple PCI and PCI Serial Port:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_138955_1 & swEnvOid = 4059

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_108131_1 & swEnvOid = 4059 #tab1

• HP Compaq 6005 Pro SFF PC: use reference dell 531 parts s in my PC HP Compaq 6005 Pro SFF

  I try and speed up my computer, I have a computer dell 531 s this works (vista). Hard drive crashed. I was hopeing I could use something out of it. This is for my HP Compaq 6005 Pro SFF PC, SG972UC #ABA... Thank you... Mike

  Hello:

  Compare the specifications of the two models, it seems that the only thing you can use the hard drive, what said you was not good, so it does not work.

  The 6005 Pro uses different memory (DDR3) and 531's DDR2, which does not in a DDR3 slot.

  The 6005 uses another set of AMD processors and that of your 531 s will not work in the 6005 Pro.

• HP Compaq 6005 Pro SFF PC: RAM-I let crucial scan my system

  Crucial scan says I can use DDR3 PC3-14900 • CL = 13 • unbuffered NON - ECC DDR3-1866 • 1.35v • 512Meg x 64... My computer has DDR3 PC3-10600 (1333 MHz)... I thought I had to say with my ram support due to the mobo and cpu speed... SG972UC #ABA, HP Compaq 6005 Pro SFF PC...  I have the chance to buy faster ram if it will work. Thanks if you can help!

  The B97 is not listed on pg 2 illustrated parts Guide.

• Memory RAM replacement hp compaq 6200 pro sff

  I have hp compaq 6200 pro SFF, now has only 2 GB of RAM memory and I want to add more to it. where can I find what I need? I have a couple of old computers here, but need to know if I can use these memoirs RAM for this computer. I can't find it.

  Hello:

  Here is the link to the quickspecs for your model...

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04123261

  Info upgrade memory are on page 7.

  Note that you can install 4 x 8 GB PC3-10600 memory, even if the configuration table only 4 x 4 GB.

• Invalid electronic serial number after swapping out motherboard, HP Compaq 6200 Pro SFF

  Hello

  I have just replaced a motherboard under warranty and I try to find the utility to change S/N in the BIOS, have obtained a location for the equivalent laptop but can't find the PC version using a USB.

  I have CSN access, but cannot find the utility appropriate to effect the change.

  PC is:

  HP Compaq 6200 Pro SFF

  Any help would be appreciated.

  Thank you

  Darren

  [Personal information]

  Hello:

  Here's what you need to do... This model has no need to inventory number or serial number change utility...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• HP Compaq 6000 PRO SFF: Need some drivers for this desktop computer

  Hello, I have a model # HP Compaq Desktop 6000 PRO SFF and I need drivers for it the following:

  PCI serial port

  PCI Simple Communications controller

  Trusted Platform Module 1.2

  Someone please help... Thank you

  You are the very welcome.

  You need this driver.  Install manually if auto installation does not work.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45367 .exe

• HP Compaq 6005 Pro SFF PC, a student protected Bios password

  Hi all

  I have a HP Compaq 6005 Pro SFF PC who was in a classroom and a student a BIOS password unfortunately we don't know who or when I need to be able to access the boot order on this machine to reimage the reader for the deployment of windows 7 new...

  The machine is only 3 months old and if I can't get in, it will be placed in a cell from useless in its current state...

  Is there a tool or a technique for the password reset bios. Remove the battery didn't solve it!

  I have 3 computers HP laptop 6730 b former officials went with BIOS password on them I have to be able to reset these that I googled for the resolution and the answer seems to be to replace the motherboard, which is not really an option because of the prohibitive costs.

  Is there a recovery tool or tip or trick to do this?

• Compaq SFF 6300 Pro: upgrade my power supply

  Hey HP gurus, receive recommendations for a more powerful PS for my box? I am wanting to update my video card for some games, and I know that the processor will handle it, but I'm running in issues of power with all the cards in the correct performance.

  You can see that it's a totally weird owner PSU (point 2):

  

  I think it's old thread answers your question fully:

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/video-card-for-HP-Compaq-Pro-6300-small-form-factor-PC/TD-p/6183611#.VK2G0ivF_OM

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Compaq 6200 Pro SFF: Latch door stuck on 6200/6300 Pro SFF

  I don't know what my users to my machines, but I received (especially 6200/6300 Pro SFF) computers that I can't open the latch to release for the sidebar being stuck. When I pull the latch, the rear of the frame folds inward and the latch will not release. Someone has any advice on how to unlock these?

  The best answer I got from another forum is to shoot the main part of the case (pliers with tapered beak hanging in the locking ring got me the best results) while lifting simultaneously the release handle on the side panel. Not 100% effective, but he did unlock about 90% of my problem machines.

• Memory / RAM upgrade - the standard issue! -HP Compaq Pro 6300 microtour

  Hello

  I intend to increase the RAM in this machine (Microtour HP Compaq Pro 6300) and I'm a bit confused to a specification - latency CASE.

  To start:
  I plan to purchase memory from a manufacturer of renowned as Crucial or Corsair and purchase identical sticks to replace the OEM memory.

  My understanding of the requirements of CASE latency for this system:
  According to the reference guide of the material that was provided with this PC, "the DIMM DDR3-SDRAM modules must also:... to support latency CASE 11 DDR3 1600 MHz (at a date 11/11/11)."

  My understanding of the CASE latency spec. offer of products available:

  Many kits that I found almost total retail prices are advertised as being "CS7,' 'CS9', or 'CS10 '.  The few kits that I found with latency = announced 11 CASES are much more expensive (+ 20%) that those with CL = 7,9,10 (spend less money without wasting on inoperable RAM is my goal).

  My question (s):

  I have to buy memory with a latency announced CASES of 11 cycles?
  -OR-
  May memory stick with another announced specification of latency CASE (no CL = 11) function properly with my system?  If so, could it be some additional steps to configure the new installation of memory or any foreseeable to overcome obstacles?

  Thank you very much for taking the time to read this and respond!
  -Mark T.

  In General, purchase memory with lower CASE ribs won't be a problem, as long as the dominant spec (i.e. DDR3-12800) memory and memory voltage specifications match.

  If you buy from a name brand as Crucial or Corsair, however, you should probably ask him if they have specifically tailored to your system memory. They have usually memory specifically designed for brand like HP systems, and that would be your best bet to ensure compatibility.