64-bit guest with ESX 4.0 operating system installation is not possible

Similar Questions

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• I'm having a problem with my Windows Vista operating system. Problem started on 19 February 2011.

  I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.

  Hello

  You can try to do a system restore before this date

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we do not have the

  We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we have not the deactivate option available in the drop down aid. Disabling is visible on another desktop computer. Can you advise us on how to disable it on the old laptop and download on the new laptop Mac?

  You can't do that. If you have a license for Windows, you can not use it on a Mac.

  In addition, Acrobat 9 is obsolete and is not compatible with any current operating system (including Windows 8, which is said by the way).

• I have an Imac with 10.6.8 operating system, I would like to know what Photoshop would work on my computer, I know it's an old computer, but can someone please advise me.

  I have an Imac with 10.6.8 operating system, I would like to know what Photoshop would work on my computer, I know it's an old computer, but can someone please advise me.

  Thank you very much

  Photoshop CS6 which you can purchase as a permanent license or use the Lightroom and Photoshop | Plan of creative photography of cloud to Adobe.

  CS5 and earlier are no longer sold and you wraps with a counterfeiting in third markets.

• Change the amount of RAM of guest from the command interface operating system

  Hello

  I'm not sure that this is possible and is the reason why I post this topic here (I hope I'm in the right place but I'm sorry if I'm not). Is it possible to update the allocation of memory in a guest from the command line operating system? My goal here is to improve the memory of the guest operating system from 1 GB to 4 GB and then schedule a reboot after hours before it takes effect on. Yet once, not for sure if this is possible, but thought I would ask.

  Thanks in advance,

  John

  You can do this through PowerCLI. Check it out here:

  http://xtravirt.com/ICT-freak-PowerCLI-script-schedule-memory-and-or-vCPU-updowngrade

  You may also plan this to be awakened in the night...

  "The only thing that annoys my learning is my education."

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful'

• Guest operating system "fedora" is not supported.

  I try to install fedora os but I get this error:

  "Guest operating system"fedora"is not supported.

  Please select a guest operating system in the general page under the settings of the VM Options tab. »

  I tried in vain.

  Help, please!

  Oh yes, do not use Easy Install. Use the option 'I'll install later' and then follow the instructions I posted in my previous post.

• How to set the resolution on in my XP operating system installation.

  I have a computer that had a copy pirated XP, I bought a genuine copy of XP for the computer I built, however, I was unaware that I could use it only for a computer, and I tried to install it on the computer with the pirated XP operating system.  Then, I was unable to adapt to the resolution on the computer that has the OS piriated.  I then bought another windows XP OS, installed on the computer including the resolution and nine I couldn't settle, (who had the OS piriated), however, I still have the same problem of not being able to set the resolution from 600x400dpi. My attempt to use the first copy of XP on my second computer was planting a virus on it?  What should I do to solve the problem?

  After doing a clean install of the operating system, you must then install the drivers for all your hardware. In your case, install the video card drivers will allow you to change the resolution.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• "The operating system is currently not configured to run this application"

  I just bought a new pc running Windows 7.  Due to problems on my old pc operation
  I no longer use it.  I copied the Microsoft Office 2003 from the old pc on a flash drive and
  then copy the program on my new pc running windows 7.  When I try to open the program I get the following error message: "the operating system is currently not configured to run this application.  I'd like your help.

  You cannot copy the program files and install it that way. You need to install MS Office 2003 on your new computer by using the installation CD. If you have more, then buy the version of Office 2010 (the latest version of Office) you want and install. If you do not want to buy Office, then you can use Office Web Apps free for very basic work or download/install the freeOpenOffice suite , which can read/write MS Office file formats. MS - MVP - Elephant Boy computers - don't panic!

• Import of duplicates with "Add" in Lightroom 2015.2.1 is not possible.

  Import of duplicates with "Add" in Lightroom 2015.2.1 is not possible.

  I have try to add photos on my hard drive for the catalogue of lightromm since the new version of Lightroom. But Lightroom says that are duplicates of already existing photo and does not matter to them. Yes they are duplicates that are in other folders, but in older versions, it was possible to slect or deselect 'import duplicates. " I can't find this option more. Where is he? Maybe you can help me. Thank you very much.

  Best regards

  Andreas

  Hi [email protected],

  The option to "Import suspected duplicates" has been deleted since the last release of Lightroom CC 2015.2.1.

  However for re-import images in Lightroom, you need to rename the images in Lightroom and then import them.

  Kind regards

  Tanuj

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• "It is not possible to use 64 bit" Message with ESX guest on Windows 7 x 64 host

  I get the "you have configured the virtual machine to use an operating system 64-bit client.» However, the 64-bit mode is not possible. This host is capable of VT, but VT is disabled.

  Enabled virtualization in the BIOS, I get this message. I also tried to activate and deactivate the "Trusted Execution" on the CPU, nothing works.

  CPU is Intel Core 2 Duo T7300 in a HP Compaq 6910p and well of course x 64 capable, as the host is running Windows 7 x 64.

  I rebooted, reinstalled the workstation, no idea why I continue to get this message?

  While making sure, but do you have you completely power off your system after installing VT turned on in the BIOS?

• no storage device found more by guest operating system installation on a virtual machine

  Hello

  I'm trying to install a guest on a new virtual machine operating system, but I can't go forward.

  I use a Dell PowerEdge 2850 , the hypervisor Server VMware ESXi 3.5 update 3 and the VMware Infrastructure Client on my computer with operating system Windows XP host.

  I am able to create a new virtual machine, but also to start on a cd for installing a guest operating system, which is (still) of Windows XP. During the installation-Setup asks me to press on enter for a new installation, the next thing is a screen with the message that Setup cannot find any storage device! It's weird, because I use the same as other data store created vm is imposed and other virtual machines always work. I created the new virtual machine several times and deleted, this is no problem. I restarted the server, but that did not help.

  Any ideas? Thanks in advance.

  I also met this problem with a fresh install of XP VM.  Windows XP does not have a driver for the BusLogic or free storage controller... without that driver, only the virtual controller is not

  recognized and drives are not found.

  http://KNMI.WordPress.com/2008/02/28/VMware-installing-Windows-XP-on-ESX-using-LSI-Logic-driver/

• How can I reformat my laptop with the Windows Vista operating system?

  Hello

  Please advise how I can do a reformat of my laptop which runs Windows Vista OS that I don't have the CD or DVD drive? normally it is preinstalled by the manufacturer. Thank you

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.