64 bit Winows 7 installation fails?

Similar Questions

• Satellite L500-1DT - drive recovery HARD 64-bit Windows 7 installation fails

  When you start the 64-bit version of win 7 cmd.exe script faile due to the following error
  ERROR could not move from v:\_IMG\10185xsP*.swm to v:\HDDRecovery\SWImg

  Duplicate files from the existing file already.

  Anyone had similar error?
  This occurs when you install Windows 7 as a first time start

  What model of laptop do you have?
  Send your model name and model number.

  You can find it on sticker Toshiba downstairs.

• Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

  Hello

  I need help. The flash on my phone card tool was out of use. I downloaded the value added package in the 1.3.5 version and tried to install. Installation fail after having extracted the Exe file compressed with the error "Setup PVAT error. [0x8146045B] ". I thougt the error may occure while I not remove the installed software before. So I uninstall the value-added package. After reboot and without installation of value added new package the same error.

  How can I install value added package again?

  Tecra A11, Windows 7 64 bit

  Concerning
  TS

  Hi TSAGI,.

  I had a similar problem with the package of added value, so I also removed the previous version first. But after the reboot, I used the freeware CCleaner tool to clean the registry and delete the old keys of VAP. So just download CCleaner and run it, after this restart again and try to install VAP.

  Check this box!

• MS-DOS 16-bit subsystem. A device driver virtual installable failed to initialize Dll. choose 'close' to complete the application.

  (1) running the command

  16-bit MS-DOS subsystem
  ---------------------------
  C:\WINDOWS\system32\command.com
  A device driver virtual installable failed to initialize Dll. choose 'close' to complete the application.
  ---------------------------
  Ignore relatives
  (2) control ML
  When am usin masm611
  'ml' is not recognized as an internal or external, operable order
  program or a batch file.
  What am supposed to to make clear this error?

  Hi Pushku,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue while using masm611, here is a link that gives you steps to change the registry settings to resolve the issue:

  "16-bit MS-DOS subsystem" error message when you install a program

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  If you need further assistance, please answer and we will be happy to help you.

• EMP 11.1.2.3 System Installer fails to install the Oracle DB, 32-bit and 64-bit Client

  Hello

  We are trying to do a fresh install of Oracle Hyperion EPM 11.1.2.3 on Windows 2008 Server R2.

  Its a standard deployment with a Foundation Server and an Essbase server.

  When you try to install on the server of the Foundation, the EPM System Installer fails to install Oracle database customers.

  The first Question we have is, we have decided using Microsoft SQL Server for the repository of Shared Services and therefore would like to know if it is safe to ignore this error and move on.

  The second question is, if we need the error pending, we want to know why the installation system fails. Looking at the newspaper, ORACLE_HOME is on something that is not valid or is longer than 128 characters.

  The Diagnostics show the below error message:

  NEWS: Will copy both pre and post copy copy files C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Install Properties filename: C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Value oracle.install.customdeinstallcommand %ORACLE_HOME%/deinstall/deinstall

  INFO: Oracle.install.customizedeinstall set to true

  INFO: The value oracle.installer.ORACLE_BASEvar ORACLE_BASE

  INFO: The value oracle.installer.LibPerms 0755

  INFO: Value oracle.installer.summary_expand_nodes NewLangs, Global, space, Langs

  INFO: The value oracle.installer.LibExtns .sl,.sl.11.1, .so,.so.11.1,.sl.1.0,.so.1.0

  INFO: oracle.installer.mandatorySetup set to true

  INFO: oracle.installer.useORACLE_BASE set to true

  INFO: Oracle.installer.removeallfiles set to true

  INFO: Oracle.installer.additionaltool_continue_onerror set to true

  INFO:

  Specify Home Details Page *.

  INFO: Setting the property "OracleHome (ORACLE_HOME)' ' D:\Oracle\Middleware\EPMSystem11R1\... \dbclient32'." Has received the value of the command line.

  INFO: Setting the property ' OracleHomeName (ORACLE_HOME_NAME)' to 'OraClient11g32_sa-essbaseapp '. Has received the value of the command line.

  INFO: Definition of the 'OracleBase (ORACLE_BASE)' property ' D:\Oracle\Middleware\EPMSystem11R1\...------'. Has received the value of the command line.

  GRAVE: The Oracle Home name is not valid. Oracle Home names must be 128 characters or less and contain only alphanumeric characters and underscores.

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: User selected: Yes/OK

  INFO: Closing OUISetupDriver.JobExecutorThread

  GRAVE: [FATAL] [INS-10008] Session initialization failed

  CAUSE: An unexpected error occurred during initialization of the session.

  ACTION: Contact Oracle Support Services or view logs

  SUMMARY:

  - .

  See associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1096

  INFO: Tips are ABORT

  GRAVE: Unconditional exit

  INFO: Add ExitStatus FAILURE to exit status set

  INFO: Find the status of output more suitable for the current application

  INFO: Exit status is - 1

  NEWS: Stop Oracle Client install

  I got my answer in the newspaper.

  The ORACLE_HOME_NAME is the question.

  Our deployment account has a hyphen -, and so the Yes program is unable to initialize.

• Cannot install the Command & Conquer 3 on Windows 7 64 bit - error interrupted installation

  I can't C & C3 to install...
  I bought the C & C3 EA store download edition earlier and decided last night that I wanted to play, so I went to install it... the installation program starts, I have chosen to install, accepted the EULA and then click Next.  The installation fails almost immediately, saying "& Command Conquer 3 Tiberium Wars install interrupted".
  so, to rule out other problems, I tried on the 32 bit XP partition I have on my computer and got the same error.
  today I reinstalled windows 7 and windows xp 32-bit on my machine, just in case there was something installed that could interfere (e.g. daemon tools) but no luck.
  I lost a lot of time googling, scouring the forums and the only solutions I found were to copy the installation files on the dvd, which does not apply to me since I downloaded the game from the EA store or install the latest version of windows install manually (but windows 7 do not use the latest version by default?) or rename the windows installation folder and then run the installation of the game to 'force' of windows to get the latest version... of course, none of them have worked for windows 7 and I have not tried to update installshield on XP yet...

  can anyone help at all?

  God, I feel like such a fool now...
  the problem has been solved...
  the proxy executable installation provided by the EA Download Manager (required to install and run the game) was killed before so Setup was not detect the protection against copying and wasn't.
  the offending process was a poorly programmed utility I run to automatically perform certain tasks repeatedly during the day, so what a completely clean install without anything more pilots and evaluating environmental Manager download the source of the problem has been discovered...
  the offending service program has been brutally murdered and that I write this post, the installation of C & C3 just succeeded...

  Thanks for trying to help Chris. B

  Kind regards.

• Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (973923 KB): the Installation fails repeatedly.

  Hello

  Unfortunately, I can't get this update installed. It fails with error Code 643. I know, this isn't a specific error message, and I tried to follow the advice given here:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/89879c8d-a63e-436a-9FD5-6183e39d1ff4/

  But this file is not created.

  Moreover, I get an error with Logitech SetPoint and a side-by-side installation failed. These problems can be related to each other?

  Thank you very much in advance, Rob.

  Windows 7 64 bit, all the updates that are installed (with the exception of C++), AMD Phenom II X 4 945, Gigabyte MA-GA770-UDP3

  Hi Robseidel,

  1. did you of recent changes on the computer?

  2 are you able to install any other updates, outside this update?

  3. who was the last update installed on the computer? To check the update, open the window update page and click View installed update.

  Please let us know what you have already tried, it saved time at both ends.

  Just to confirm, did you follow the steps outlined in the article below for Windows Vista as the steps for Windows XP do not work with Windows Vista, and that's why there could be issues in the creation of the files.

  http://support.Microsoft.com/kb/958052

  If the steps in the link above didn't help then try the steps below and see if that makes a difference.

  1 restart the computer in safe mode (to restart in mode safe keep pressing F8 on reboot).

  2. click on the start menu and in the search box start type CMD.

  3. in the list right click on CMD, and then click Run as administrator.

  4. at the command prompt, type net stop cryptsvc.

  5 rename C:\windows\System32\Catroot2 Catroot2.old.

  6 open the C:\windows folder, and then rename the folder C:\Windows\SoftwareDistribution as SoftwareDistribution.old.

  7. at the command prompt, type net start cryptsvc, and press enter

  8 restart the computer in normal mode

  9. run updates and check if you are able to get the updates without any error.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Code 80070005 that I tried to install a update for my HP w1907 wide LCD monitor since I got this computer last year, but the installation fails every day.

  I tried to install a udate for my HP w1907 LCD's wide screen since I got this computer last year, but the installation fails every day.

  Thanks for the clarification, jackfrompa. If the monitor works to your satisfaction, then I see no reason to update his driver unless there is a Security problem with the current driver.
  I can't find info list of video drivers of HP being a security risk.
  Is the latest driver display on the site of HP for Vista Premium 32 bit for the HP w1907 19 inch Widescreen LCD Monitor

  Version: 2.00 Rev a.
  October 16, 2008

  There is also a driver for LCD 19 inch HP w1907 screen available for Vista which was released in October 2008 with the same Version, but I don't know if it is the same driver for the HP w1907 19 inch Widescreen LCD Monitor.

  If it helps, here are the steps from HP for a monitor driver installation in Windows 98, Me, XP and Vista .
  MowGreen Services consumer safety update

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• HP 7310: HP 7310 all-in-One Driver installation fails on Windows 10

  I was thrilled to see that HP had a version of Windows 10 recommended its full printer driver, located at 7310

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110183-3&cc=us&DLC=en&LC=en...

  As with most HP stuff and most of the things Windows, however, my pleasure was short-lived. I started the installation (after choosing "10 64-bit Windows" option) and everything seems to work as I remembered, and the installer even got to the point where he discovered my network printer. But then this black popup appeared in the corner of my screen saying "your app does not work with Windows 10". The idea behind spoke of how the application was using the old protocols or something which would be harmful to the computer. In the end, the installation failed - the 7310 HP does not appear in my series of printers installed. Total disappointment, I have come to expect.

  In the notes for installing HP says "If you only want the print (without the Photosmart Software Suite) driver, it is available as a separate download named"HP Deskjet basic driver"." In fact the pilot "baisc" would probably be all that I need. But alas it is unconnected with this driver and search both using the internal HP AND visa search engines search gives nothing.

  Anyone with ideas? HP driver has been updated 29/07/15 so this isn't old stuff. Thank you.

  So here's my solution. First of all, you get that you shouldn't be disturbed by installation failure message when you install this package on Windows 10. There are nine steps of installation and the ninth is to install a "Bing toolbar' or something like this. This is apparently an attempt to install a toolbar in Internet Explorer. The failure occurs because there is not Internet Explorer on Windows 10. This failure would have nothing to do with the failure of the connection to the printer.

  The solution is to install all the updates of Windows 10 before trying to install the HP driver software. I have two identical machines brand new with Windows on them factory installed 10. I have tried to install all the stuff before waiting for updates to Windows, and that was the one where I failed... the part 'add a device' on the first installation went well and has print a list of the activities of the network in its effort to talk to my printer, but in the end, it failed and I got the big red 'X' on the final schedule which appears (the 'X' was between the router /) portrays switch and the printer). After the updates of Windows on this computer, the installation was successful. Then with the second machine, I did the updates of Windows first, and on this machine, the HP installation was successful the first time.

  It could also be that it's specific hardware; It is possible that my Windows updates included an update from the manufacturer of my particular network interface, for example, and the network interface driver was the problem. My machines are the two model PowerSpec G415 computers to office who have a "Killer Z97X" mainboard ASRock, which I'm guessing that contains the material of common Intel chipset. In any case, good luck with that to all who follow in my footsteps. This one seems to have a happy ending for me at least.

• CRC error on large compressed files (.zip, .rar, .cab, etc...) The installation fails too...

  Hello world

  I have a new Dell computer. It's a Dell Studio 540 with Windows Vista Home Premium 64 bit, with 1 TG of hard drive and 8 GB of RAM. I have problems with "decompression" of a large number of large compressed files (more than 50 GB). Also, because the files on a DVD are often compressed (in the cab for the majority file), the same error occurred on an installation package. Thus, to resume, I got CRC error on compressed files, while opening the zipper AND my different types of software installation fails with errors of Sami.

  Before you answer, please read my steps below:

  1. I reinstalled Windows Vista 2 times from scratch with a clean format. Whenever I get the same error on the same files even when there is nothing installed (even the drivers are not installed).
  2. I tried to run Windows XP Mini, a very light version of XP is the launch of a CD at startup and run in RAM. The same problem.
  3. I did all kinds of tests of the material myself AND with Dell technical support. Nothing was found, and I'm sure it's 99.9% true. Everything has been tested: RAM, hard drive, processor, motherboard, etc. The Dell technical support told me that my computer is 100% functional and that this error is due to some software (Windows) does not very well with 64-bit processor... Everything works well in my work all day EXCEPT for the decompression of data.
  4. my files are not damaged: they unzip perfectly on other computers. In addition, the program that do not install because of the CRC error with compressed file are all used before on another computer OR are new. I even changed DVD to the store to get a new one and the problem is still there. I also tried to download the torrent from the .iso file and the same problem happened.
  5. the files on my computer are not corrupted by the hard drive. I copy keys usb, directrly on the DVD to the hard drive. All possible tests have been done on the files, and they are ok.
  6. I did all kinds of tests such as checkdisk, spyware, etc... but given that the installation has not helped with it, I don't think it's related.

  My last hope is here... MVP is maybe know a problem in which Windows with zip files. I read a lot of people of the CRC errors, so I'm sure something happens. I am currently with the Dell customer service to get a full refund to buy a new computer without a 64-bit processor because it looks too new for Microsoft.

  So if anyone knows something I could try, tweak, change to help me with my problem please let me know.

  Thank you very much!

  DarkJaff

  Hello!

  This morning, I realized that I never returned to close this topic. In fact, I work with dell for a number of weeks, talk to like 10 or 15 support technical Member, try something else and you know what works?

  Reinstall windows... But in my case, I have reinstalled windows 2 times before they ask me to do it again. So I did and everything worked perfectly... For the third time is lucky: P in fact, perhaps during the first installation of 2, RAM has not been installed properly or has failed for a second, because every file that has been read has become corrupted, but at the same time, everything is normal on my computer seems to work ok... In addition, it could be the update that I did for my BIOS. So, a good test would be to update your BIOS, shut down your computer, check if the ram is installed ok, restart, verify that your ram is detected.

  After that, reinstall your windows, but DO NOT use the file you had on your "not working version of windows. I lost a lot of backup of the thing on my computer because even put on my new fresh install of windows, these rar did not work. I needed to pick up an old DVD and they worked

  So, I hope this will help!

  DarkJaff

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• HP 7520 installation fails

  I've successfully installed 7520 drivers and setup a few months ago and printer was working fine with and without wire.  Then one day she was leaving print slowly wired desktop computer.  Later, there was no possibility of the wired printer.  The printer works very well to a print wireless from another computer request.  The wired connection display a print spooler does not not message.  I started the print spooler service and I was not able to add a printer because of a print spooler similar message.

  Vista Home Premium 64-bit

  What I tried...

  Uninstall all HP printer programs

  Scanned the system with several malware product, some things have been cleaned up so that Norton missed.

  Reinstalled HP software and drivers site (PS7520_1315 - 1.exe)

  When you run the installation fails with an error code of 1726 - cannot add discovered Port Monitor HP Monitor Port.

  Downloaded the 'HP Installation failure - Port Monitor Failure' and follow the instructions.

  He ran and he prays to start the print spooler that was turned off again and then continues on but fails in the same place.

  Basically, I uninstalled, reinstalled several times, scanned.  What I am doing wrong?

  I love this printer, but I can't use it from my desktop connection because of the wired print spooler problem.

  Can anyone help?  I spent too much time with this.

  TIA

  Hi Waterboy71,

  Thanks for the reply.  I was stuck in a loop.  I downloaded the doctor Print and it ran with the
  printer on and USB connected to the printer.  It identified my printer and software "Installed" status, said.  Click
  Then--> the difficulty of printing and it tells me that the software must be installed.  When I download and install, the
  installation fails with the same error as before.

  Error 1726 cannot add the Port Discovery Port Monitor HP monitor.

  Software uninstall and if I run again the doctor, he said that the software must be installed. Of course, it
  fails again.

  It became clear that the problem was with my machine so after studying a bit, that's what difficulty ultimately the
  problem.

  From an open administrator command prompt

  > sfc/scannow

  Some corrupted files have been corrected. After a restart I also did the following,

  From an open administrator command prompt

  > netsh winsock reset at the shell command prompt and then press the Enter key.

  > netsh int ipv4 reset in the line shell command and then press the Enter key.

  After a reboot the HP print driver installation succeeded.

  In the end, the problem was with the corrupted system files and socket connection. It is clear that Norton AVP is not
  Very well. I went to something else and won't use EVER Norton. Once again.

  Thanks for the help.

• Upgrade Windows 7 (64-bit) on Windows XP (32-bit) system - select Partition fails

  

  Step 7 fails, and I can't go forward.

  Poster, 3 partitions on my C: drive

  0 small partition reserved by manufacturer HW SYSTEM partition

  1 SYSTEM partition

  partition 2 free

  When I select the 0 partition, I get a message that it has reserved

  When I select partition 1 or 2, I get a message that it is not usable and to view the log of installation for more details

  Can not go to the front of this form.

  I'm afraid to reformat a partition 0 or 1 for fear that I will lose my OS XP and then have nothing of partition. The Office of origin came preloaded and I have no support for Windows XP to reinstall.  Windows 7 is an upgrade, and it is looking for the previous installation.  So if I reformat the partition 0 and partition 1, don't I be destroy the previous installation that will search the upgrade?

  I followed a troubleshooting thread that I found it says to upgrade exit, go back into the XP command prompt and run the commands to make the new format FAT partitions.  But when I ran the steps it told me that the partitions were already in the new format.

  I have no idea where to see the "installation log" that allegedly created upgrade.  How can I get a command prompt to upgrade the disk to find these newspapers?  Alternatively, they are somewhere that I can get from my XP OS written?

  I managed to get Windows 7 installed.  To overcome this problem (by selecting the score) I disconnected all my disks but the C (for installation) and the DVD drive (with download software).  Then I made the option advanced on-screen and repartitioned and formatted the zone system.  Was a bit annoying to do this to my Win XP partitions 'good' (as if download installation failed, what I would do), but that's what was necessary in order to select the partition.

  In the process, I created another problem that I will list in a different thread.  Basically, I thought I did a good thing by creating a boot partition that housed just the installation, but now when I try to use Windows Easy Transfer, I am running problems of space on the C: drive.  I create a thread on this problem.

• Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

  Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

  I'm trying to reinstall Google Chrome on my Windows 7 Home Premium Service Pack 1 computer laptop.  I uninstalled google Chrome and tried to reinstall it on my Windows 7 laptop.  I can download the installation file or install dynamically without having to download the file.  The installer of Google Chrome runs, but at the end of the operation, I receive the error message 'unable to cache the installation program downloaded. "Error: 0 x 80070002.  I tried to install Chrome with IE9 and Firefox 10.0.3

  PC: Dell Studio 1557
  Processor: Intel Core i7
  RAM: 4 GB
  System type: 64-bit operating system

  Hello

  1. are you able to install any other program normally?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Put the computer to boot and then try to install Google chrome.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: after the troubleshooting steps, please return the computer to start as usual (see step 7 link mentioned above)

  Method 3:

  Follow the instructions in the link below.

  http://support.Google.com/installer/bin/answer.py?hl=en&answer=126299

  I suggest also please contact the support team of Google for assistance.

  http://support.Google.com/chrome/?hl=en