Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

Similar Questions

• Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked

  I tried to install MS Office 2010 and to install HP Officejet J4580.

  I tried to remove some programs.

  Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked with unknown

  Hello

  1. do you receive the same error message when you try to install HP Officejet J4580?

  2 have you made any changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Run the application as administrator and check.

  Refer to this link: How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Method 2: try to install using this printing software tool HP Officejet J4580.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Regarding the installation of MS Office 2010, you can visit this link and check if it helps. You receive an error message when you install an Office program or you open an Office program or a document

  http://support.Microsoft.com/kb/838687

  I hope this helps!

• Photosmart Premium C410a: driver installation fails repeatedly wins 10

  Network printer on the local wifi network.  Became the busy error scan after reclassification of Win7 to Win10, did not know that was a problem known to HP, so uninstalled the printer drivers and downloaded the latest version of the driver, went to reinstall.  It happens on the screen "I agree", and when I click Next, it flashes "Remove HP software" and closes.  Tried several times.  Checked if it has been set to the private network, it is.  Tried the HPPrinterInstallWizard, it downloads the same driver, take me up to that point, and when the installation fails it curls back and begins to do the same thing everywhere.  Tried the HPPrinterandScanDoctor, it does exactly the same thing.  And of course, HP don't talk to me because my printer is not new.  I even tried the old software CD (2012), it loads and says: "Welcome Back! Click here to exit. »

  Hi @pgd1,

  Welcome to the HP Forums!

  I see that you have trouble to install the printer HP Photosmart Premium c410a on Windows 10. And I'm happy to help you!

  To check the printer hardware is functional, are you able to make copies using the printer scanner glass?

  You see error messages on the display of the printer?

  How is the printer connected? Wireless, Ethernet or USB?

  In the meantime, try the following steps in the following order:

  • Uninstall the software. Uninstalling the printer software. (Only do it if you think that some software are always installed.)
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows.

  Hope that these aid measures and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• Tecra A11 - 11 H - drivers for Windows XP 64-bit

  Hello

  is - anyone know where to find the driver for the wireless card of Tecra A11 - 11: using Windows XP 64 bit, does anyone have a complete list of the hardware models Tecra A11 - 11: using as toshiba support website is not driver for Windows XP 64-bit.

  Thank you very much

  Hey Buddy,

  Windows XP 64-bit is not supported by Toshiba, there is no drivers for this OS. The 64-bit version of XP was not very popular then, probably, you will find all the drivers on external pages. If you want XP I recommend the 32-bit version or Windows 7 professional who has an XP virtualization mode.

  Tecra A11 - 11: 00 a WLAN Intel card in order to check the Intel page directly. Maybe you can find a driver: [www.intel.com]

  In addition, if you install a hardware such as Everest or PC Wizard 2011 diagnostic tool you can check the installed hardware and so you can search for drivers yourself.

  But as I wrote already: choose another OS ;)

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• Tecra A11-19th - touchpad driver for Win 10

  Anyone know it if there is a driver for this model of Toshiba touchpad and when can we find? If there is not, is there a chance that it will be provided?

  A11 is not supported in Win10.
  Windows Update can find a compatible driver.

• The WAIK installation fails with vista ultimate 64-bit

  I get the error message "the"WinPE.cab"file, required for installation is damaged and can not be used".
  I tried again download the installation, reinstall all windows vista file and I get the same error message. No idea how to solve this problem? I need WAIK to run Vlite...

  Thank you

  Hi Bbrozerben,

   

  Welcome to Microsoft Answers Forums.

  This can happen if there is some system files corrupted on your computer. Suggest you to scan SFC who will search the system files corrupted on the computer and replace them.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  If the step above is not difficulty trying to outcome re downloaded the file and try to install.

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• W500: Dialog box Outlook 2010 32 bit ' file/Options '. "fails on Win 7 64 bit

  Hi all

  For some reason, it seems to be interference between certain Lenovo W500 Driver/software and Office 2010 that breaks Outlook 2010:

  1 / I installed a new copy of Windows 7 Enterprise, 64-bit, no driver installed Lenovo (IE only the provided Windows drivers) - there are devices that are not yet recognized, but I don't who has not yet set

  2 / I install a new copy of Office 2010 Professional Plus 32 bit, which includes Outlook 2010

  3 / once I start Outlook to join my Exchange Server and my messages start to flow-well

  4 / I then go into file/Options and then make several settings and save by clicking OK - so so good fa

  5 / can I update the system using the Lenovo update tool (update of the ThninkVantage system) and adding all the updates (not those in option)

  6 / Once finished, after the obligatory reboot, I launch Outlook again

  7 / I repeat step 4 above - a message box appears read "the file does not exist"; at this point, only the button cancel from the dialog box Options can dismiss the Options dialog box.

  7bis / as in step 7, but just open Options and immediately, click OK (IE do not any change in the Options) leads to the same error "the file does not exist.

  8 / restore the system to a restore point just before applying updates from Lenovo brings the system back to normal, IE as in step 4 above.

  Any ideas of what might be broken Outlook?

  Thank you!

  Rodolphe

  Well I finally resolved the issue - for some reason, as the "Sound reminder" field on the Advanced tab was empty. I put it to the mail notification sound electronic normal windows, and then the dialog box options was happy.

  On the complement of research, it is effectively disabled. Don't know why but will survey.

• OfficeJet Pro L7555 installation fails on Windows 7 (64-bit). "Fatal error".

  Printing/scanning doctor does not resolve.  Wired network.  This device works on my network for almost 2 years.  Has stopped working and will not reinstall.  Basic printing works, but cannot scan.  «LaunchNetworkInstall gets back unexpected value 1246.»

  In short, if you ar following the instructions to the letter - that is not possible.

  I downloaded the software from the link I provided and that you have provided. I chose the full features software and installed the printer on my Win7 machine. Both these pages appear in all versions of the software, and the page with the check box that requires you to accept the conditions required by law. There is no way for these pages to be omitted on your computer.

  I'll transfer my instructions to uninstall/reinstall of the printer.

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-79356-2&cc=us&DLC=en&LC=en&OS=4063&product=3643617&sw_lang=

  Install and let me know the result!

• Windows imaging component installation fails in my Windows7 64 bit OS

  I try to install the windows imaging component (Wic_x64.exe) to my windows 7 (Home basic) 64 bit OS. But it is to show the Setup error: "you are not authorized to update of windows, please contact your system administrator. It comes to my personal laptop. Help, please. At the same time, I also tried with (WIC_x86.exe) it shows error like "Seup could not find the update.inf file needed to update your system. Help, please

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• win 10 64-bit error 0xc0000142 trying to open

  I have installed Premiere Pro 2015 CC on a new installation of 10 64-bit windows.  When I try to open it, I get the message that the application could not be started-(0xc0000142).  It works fine on my 64 bit Windows 7 computer.  Put in Compatibility Mode for Windows 7 made no difference.

  I have uninstalled, reinstalled, downloaded and installed it again.  I get the same result every time.

  HP Pavilion DV7-4065dx

  8 GB Ram

  AMD Phenom II processor 3

  Intel graphic chipset

  Help someone?

  DCAudio

  Hi Dave,.

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Installation fails when wake update 10.1.2 in 10.1.0 - Package MSI

  Hello.

  I need help.

  After "slipstreaming" in the 10.1.0 10.1.2 update Player Package MSI - installer fails with the message:

  [quote] Error 1334. Cannot install the file 'adobearmhelper.exe' because the file is not found in the file 'Data1.cab '. This may indicate a network error, an error reading from the CD-ROM, or a problem with this package. [/ quote]

  The system is W7 SP1 with the latest updates. Without anti-virus running. Working under the account administrator (SYSTEM and console).

  Reader 10.1.0 I joined the 10.1.2 update as follows:

  [quote] msiexec /a AdbeRdr1010_en_US.msi /p AdbeRdrUpd1012.msp [/quote]

  Update runs successfully.

  Extract the Data1.cab of the new integrated package shows: 'adobearmhelper.exe' is missing.

  Extract AdbeRdrUpd1012.msp shows: adobearmhelper.exe is here.

  The 1 - Mio.-$-Question is: why the wake not working / integrate all the correct files?

  Very funny: when I download the AdbeRdr1012_en_US.exe of ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.2/en_US/, extract the .exe and take a look in the Data1.cab-> adobearmhelper.exe is missing. Check the 'AcroRead.msi' with shows of Orca MSI Editor: no input files for adobearmhelper.exe table.

  Install the AdbeRdr1012_en_US.exe giving the version 10.1.0.

  What's wrong?

  I downloaded the MSI package for reader 10.1.0 of:

  FTP://FTP.Adobe.com/pub/Adobe/Reader/win/10.x/10.1.0/en_US/

  and 10.1.2 update of:

  FTP://FTP.Adobe.com/pub/Adobe/Reader/win/10.x/10.1.2/Misc/

  Integrate and install 10.1.1 in 10.1.0 works fine without errors.

  Unfortunately, an update of 10.1.1 10.1.2 stops with an error and does not work.

  Is anyone know about problems with 10.1.2?

  Thanks for your help.

  Concerning

  Johannes

  Please use the correct way to create the AIP as described below. The agreement in principle for the full drive (i.e. AdbeRdr1010_en_US.msi) must be created as a transaction separate, followed by the update of the AIP created with the last update patch (i.e. AdbeRdrUpd1012.msp).

  Please visit kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf for more information on the same.

  1. msiexec /a AdbeRdr1010_en_US.msi

  (When you are prompted to enter an installation location a location appropriate disk space. say C:\AIP)

  2 msiexec /a C:\AIP\AdbeRdr1010_en_US.msi /p AdbeRdrUpd1012.msp

  This will ensure that all new files added as part of a new update will be automatically incorporated in the AIP created.

  Hope this will solve your problem and save you the trouble of having to remove the entry from Orca explicitly.

  Ankit

• Tecra A11 - cannot start the BIOS update

  Hello

  I downloaded the latest update of the Bios B2.50 - EC1.80 for Tecra A11-127 (PTSE0E. Wenn I start installing, an error occurs: "this computer is not supported", but my laptop is an A11-127 with Partnumber PTSE0E, why it doesn't work?

  Why is he not possibel to download an old Version of the Bios?

  JSpindler

  Hi jspindler,

  The question is why you want to update the BIOS? This update should be carried out only if it of really necessary. In addition, only the most recent update of the BIOS can be downloaded as it fixes most problems.

  In any case, you need to start the BIOS as an administrator and you should decompress all files from zip archive before start you. Also, make sure that the value added package is installed.

  By the way: what operating system is installed?

• Photoshop CS2 Installation Fail! Help, please!

  So I tried to install Photoshop CS2 and then this message appears: installation failed. Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software. Help, please!

  Hello

  This link might help: error installing CS2 (on Mac OSX, 10.8.2)

  Kind regards

  Sheena

• Creative Suite "Installation failed"

  Hello

  First of all, I'm on a mac and I already uninstalled all previous Adobe applications out of the computer, so now there are absolutely none (except the flash player).

  I just got the installation of Creative Suite 6 of my school package. I can open and run the pack and pass all the steps up to the installation, more particularly when it says "Validation of Packages", where then a window pops up saying: "the installation failed. Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software to support' and then makes me leave, does it every time.

  Am I missing or doing wrong?

  Thank you

  Kaidan

  Please visit: troubleshooting installation problems with the log files. CS5, CS5.5, CS6

  I hope this helps.

  Concerning

  Megha Rawat