7303033 patch failed

Similar Questions

• Each installation of the PATCH fails after installing Windows updates

  Hello

  I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).

  Here's the test scenario:
  1. install a fresh copy of Windows on a test computer
  2. install all the Windows updates available (so the system is up-to-date)
  3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server

  4. install the MSI from the online location using a command line like this:

  msiexec /i http://server/share/package.msi

  5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
  6 install the patch v1.0.1

  RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."

  NOTES:
  1. the question has replicated to Windows 7 and 8 machines updated
  2. the question is not replicated on a new install of Windows without updates applied

  Is anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.

  THX,

  Daniel

  Hello Daniel,.

  Thanks for posting in the Microsoft Community.

  I suggest you post your question in the MSDN forums:

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Patch failed

  Hi all

  EBS R12.2.4

  RHEL 6.5

  I am applying patch 20518468 , but he failed because he has a pre-requesite > this hotfix requires the following codelevel or more: "R12. T2K. C.6 ».

  Can I apply the patch ' R12. T2K. C.6' without abandonment and abadoning the patch failed? Or it is mandatory to abort it? or abandon it?

  Thank you very much

  JC

  Hello

  you will have to give up patching session. Apply the patch required pre and resume with the main patch. That's why I said you should give more emphasis on the analysis of patch rather than applying the fix

  concerning

  Pravin

• Update failed... could not be installed (applies the patch failed)-I use 7.0.1

  Update failed. The update could not be installed (patch applies failed). He seems to want to upgrade 7.0.1 to 8. But when I click on the link, it does not offer updates, just all a band/reinstall! Where is the page of updates? Help?

  You can try the alternative and easier way by downloading here

  • getfirefox.com

• Online Enablement Patching patch Failed 13543062 with applications. AD_ZD_PREP contains errors

  Hi people,

  We have recently updated our application 12.2.0 of 12.1.3. Everything was fine. Application also works smoothly. Now, we are working on enablement patch online using Oracle EBS - Réf.-E48839-02, Chapter 4. When applying patch 13543062: R12. AD. C, after all the pre-reqs tasks that we face worker failed on the first steps. After reviewing the logfile worker, we try to compile the requested package body but it returns:

  ERROR on line 1:

  ORA-04063: package body "APPS. AD_ZD_PREP"contains errors

  ORA-06508: PL/SQL: called program unit is not found: 'APPS. AD_ZD_PREP ".

  ORA-06512: at line 3 level

  
  

  Kind regards

  Ali

  Thanks for your reply. The problem has been resolved by the following plan of action.

  1. check if the RDBMS 17502060 patch has been applied to the database.

  2. If the hotfix has been applied, then run the script:

  SQL > sqlplus / as sysdba

  17502060/files/sqlpatch/17502060/postinstall. This patch SQL.

  3 run ADGRANTS

  SQL > sqlplus / as sysdba

  SQL > @$APPL_TOP/admin/adgrants.sql APPS

  4. Finally, to compile the package body

  SQL > conn apps/apps

  SQL > alter the body of package AD_ZD_PREP compilation;

  Kind regards

  Ali Raza Memon

• Apply the 14833587 Patch fails to step post_deploy

  After you apply Patch 14833587 , run the post_deploy.bat fails with the following error message:
  
  Exception in thread "main" java.lang.NoClassDefFoundError:
  Oracle/sysman/emSDK/conf/TargetInstaller
  Caused by: java.lang.ClassNotFoundException:
  oracle.sysman.emSDK.conf.TargetInstaller
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  
  Known problems?
  
  -wern

  Hello

  Confirm if the OS is Windows?

  If Yes, then we have a known problem.

  Cause:
  ====
  On the ports of Unix, we use post_deploy.sh that explicitly defines EMDROOT. This is not the case in post_deploy.bat

  Is discussed in the following bug:
  Bug 16061278: POST_DEPLOY of RACE. BAT FOR PATCH 14833587 FAILS WITH a NOCLASSDEFFOUNDERROR

  Workaround solution:
  ========
  As a work around, follow the steps below:

  1 set the EMDROOT variable manually:
  Set EMDROOT = $ORACLE_HOME

  2. run the post script: post_deploy.bat

  Now, this operation fails with the following error:
  C:\Oracle\oem\oms\14833587>post_deploy

  Post SGD automation deployment script [Version: 11.1.0.9.5, Build date: February 5, 2012]
  ________________________________________________________________________________
  _______

  Enter the location of the Patch: C:\Oracle\oem\oms\14833587\
  Please enter the SYSMAN password:
  ********
  ****

  The script will run the following commands:
  applypatch rest - patchHome C:\Oracle\oem\oms\14833587\ c:\oracle\oem\oms\bin\emctl
  Please check logfile "C:\Oracle\oem\oms\14833587\log\2013-01-18-14-32-07.log"...
  The system does not have the specified path.
  The script has failed to complete due to failure of the command. Please check the log file for err

  3. now the above error, choose the command that it runs in-house and run it manually:
  applypatch rest - patchHome Patch Location\14833587\ \bin\emctl

  Now the application of the fix is complete.

  Thank you
  Vincent

• Vista KB2633171 has failed, I get the patch failed to update security error "fffffffe.

  When people ask me to run an update of Windows Vista security I get failure update to update security for Windows Vista, error "fffffffe. I don't know how to solve this problem, I went through all the tips in Windows Help.When I view update history it says, update security for Windows Vista KB2633171 has failed. I don't know what to do

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-FFFFFFFE

• R12.2 Online help patch Failed

  We are modernizing EBS 11i to R12.2.4. and the following Oracle document Reference No.. E48834-15, we are in Chapter - 5, 'Applications technology missions ".

  6. install online help (recommended), pg no: 107.

  When applying on-line help patch get below error.

  phase of adoption $ = apply patchtop = $AU_TOP/patch/115 patches = driver: u10201000.drv options = nocopyportion, nogenerateportion, forceapply /hotpatch = yes

  Enter the password for APPS:

  Enter the password:

  Enter the password for WLSADMIN:

  Validation of credentials.

  During initialization.

  Run the editing context: /oracle_homes/archr12/fs2/inst/apps/ARCH_archapp1/appl/admin/ARCH_archapp1.xml

  Patch editing context: /oracle_homes/archr12/fs1/inst/apps/ARCH_archapp1/appl/admin/ARCH_archapp1.xml

  Driver file (up to 50000000 bytes).

  Free patch file system space: 65,66 GB

  Validate the configuration of the system.

  Registry node is valid.

  Audit of existing sessions of adoption.

  Continuing with the existing session [ID of Session: 17]

  [UNEXPECTED] Cannot use /hotpatch while a patchwork of existing cycle is running.

  [UNEXPECTED] Fatal error has occurred. Leaving current adoption session.

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  Thank you

  Jeremy

  You try to apply the patch using /hotpatch option when a cycle existing adoption is ongoing. This is not allowed. Either you apply the patch to fix file system online help (phase of adoption fair use = apply patches =) or you can fill out/drop current patch cycle, then apply using /hotpatch.

• Installation was successful, but a patch failed

  Receives errors in what follows (see picture) when trying to install Photoshop CC. How can I fix? I tried to speak with support, but they just sent me a link that did not really help :/

  Things Ive done to date-

  • Uninstalled and reinstalled
  • Machine to restart

  Also to help.

  • Mac OS x Lion
  • 

  FTSRI click on the link below and open Photoshop Elements download page, just keep it open:

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-10-11-downloads.html

  Click on the link below and download Adobe Camera Raw 9 Update:

  http://swupdl.Adobe.com/updates/OOBE/aam20/Mac/PhotoshopCameraRaw8-8.0/9.0.592/Setup.dmg

  Once the download is complete. Leave the creative cloud office.

  Then, install the update.

• APSB07-02 security patch fails to install correctly

  I followed the instructions (even though they skipped the step WHERE should be the file wsconfig.jar - in the lib directory, btw) to the http://www.adobe.com/support/security/bulletins/apsb07-02.html and when I run the command 'java - Dtrace.ci = 1 - jar wsconfig.jar - upgrade - v' from the lib directory I get a DOS prompt that the file is "corrupt or the wrong version of wsconfig.jar.»
  
  This is the version of several server running jrun4 updater 6.
  
  Any help would be appreciated... Thank you.

  I found the problem after working with another user on this forum, so I'll post what I sent to Adobe as the answer.

  In this security bulletin: http://www.adobe.com/support/security/bulletins/apsb07-02.html , several steps are simply left out of the process. We use the multi-server with Jrun4 Updater 6 version, so I will use that as my example and fill in the missing steps. The steps with >< surrounding="" them="" are="" missing="" from="" the="">

  Backup the existing {jrun_root}\lib\wsconfig.jar to wsconfig.jar.bu.
  Download the hotfix (urgent wsconfig-U6 - 65311.jar - 2.5 MB).
  > Unzip the downloaded file (wsconfig-U6 - 65311.zip), it contains two files called wsconfig-U6 - 65311.jar and another file named jrun-hotfix - 65311.jar
  > And rename wsconfig-U6 - 65311.jar wsconfig.jar
  Stop all ColdFusion MX and JRun servers IIS (WWW Publishing Services) servers. Also, stop the Windows Management Instrumentation service to unlock the IIS connector.
  Note: This step is important for ISPS. With IIS running, the Connector Setup program stops and restarts each site during the upgrade, causing the upgrade to take over time.
  > Move the wsconfig.jar file that you have renamed in the {jrun_root} \lib directory.
  Navigate to the \jrun4\lib directory and run the Connector upgrade:
  CD {jrun_root} \lib
  Java - Dtrace.ci = 1-jar wsconfig.jar - upgrade - v
  Make sure the upgrade completed successfully.
  Inspect {jrun_root}\lib\wsconfig\wsconfig.log for errors
  Check the tab version of {jrun_root} \lib\wsconfig\ (number) \jrun_iis6_wildcard.dll. The "Product Version" field should indicate 4,0,6,108407
  Another way to check the version is a request to wsconfig.jar directly as follows:
  java-jar wsconfig.jar - info
  The command should return "Macromedia JRun 4.0 (Build 108407)".

  > Move the jrun-hotfix - 65311.jar file that you have unpacked above and save in {jrun_root} \servers\lib.

• Patch 3480000 fails with ORA-03114

  While applying the patch 3480000 for the improvement of 11.5.9 to 11.5.10.2 patch fails with
  ORA-03114: not connected to ORACLE
  
  
  occurred while executing the SQL statement:
  
  UPDATE fnd_install_processes
  SET skip_flag = "
  WHERE worker_id = 6
  
  Error stolen pending transactions and closing Pro * C connection.
  
  The error is:
  
  FND-UT-CMT: ORA-01041: internal error. hostdef extension doesn't exist
  
  Fate of AD worker suffering from failure.
  
  When compiling packages such as ahl/11.5.0/patch/115/sql/AHLPUFSS.pls.
  
  The database in 9.2.0.6 RAC.

  Hello

  Please see if these documents help.

  Note: 577534,1 - errors on FndXdfCmp.class: "ORA-03113: end of file on communication channel" and "FND-UT-CMT: ORA-01041: internal error." hostdef extension does not exist.
  Note: 340238.1 - Patch 4143498 receives errors Ora-01041, Ora-03114 on Iscrf70b.Pls Ora-01041

  Kind regards
  Hussein

• Windows Update fails with the error 'WindowsUpdate_0000057E '.

  I have windows vista, but my microsoft office is 2002.

  For the latest updates of the week 2 windows keep failing.
  1 security Update for Microsoft Excel 2002 (KB959988)
  2. Update for Office XP (KB933388)

  Whenever the update fails, I get the error "WindowsUpdate_0000057E".

  I'm not good with computers and need help on how to fix this...
  

  

  When you try to download an ActiveX control, install an update to Windows or to a Windows component, install a service pack for Windows or to a Windows component, or install a Microsoft or third-party software, you may experience one or more of the following symptoms:

  • You may receive the following error message when you try to install a program or update:
    Digital signature not found
    The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been changed since then, it has been tested.
    The software you are about to install does not contain a Microsoft digital signature. There is therefore no guarantee that this software works correctly with Windows.
    Package name
    If you want to search for Microsoft digitally software signed, refer to the Windows Update Web site at http://windowsupdate.microsoft.com to see if one is available.
    Do you want to continue the installation?

    If you click Details, you receive the following message is displayed:

    Microsoft Windows
    The signature on the software package you want to install is not valid. The package is not signed correctly.

    After you click OK in the first error message dialog box, you may receive a message that States that the installation was successful, or you may receive the following error message:

    Name of the Update Package
    The cryptographic operation failed due to a local security option setting.
  • When you try to install an update or to install a service pack, you may receive an error message that is similar to one of the following:
    • Name of the Update Package
  
  The Setup program could not verify the integrity of the file Update.inf. Make sure the cryptographic service is running on this computer.
• Failed to install catalog files.
• The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important).

  This software will not be installed. Contact your system administrator.

• The software you are installing has not passed Windows Logo testing to verify its compatibility with this version of Windows. (Tell me why this testing is important).
• When you try to install a service pack Windows XP, you may receive an error message similar to the following:
  Service Pack 1 Setup could not verify the integrity of the file. Make sure the cryptographic service is running on this computer
• When you try to install Microsoft Data Access Components (MDAC) 2.8, you may receive an error message similar to the following:
  «"" "INF. cause installation failure: the timestamp signature and/or certificate could not be verified or is incorrect.»»»"
• The %WINDIR%\System32\CatRoot2\Edb.log may reach 20 megabytes (MB) even though the file is typically less than 1 MB.
• When you try to install a package from the Windows Update Web site or the Microsoft Update Web site, you may receive a message that is similar to the following:
  The software has not passed Windows logo testing and will not be installed.
• When you examine the file % systemroot%\Windowsupdate.log, you should see an entry for one of the following errors:
  • 0 x 80096001
  • 0 x 80096005
  • 0 x 80096010
  • 0x800B0001
  • 0x800B0003
  • 0x800B0004
  • 0x800B0109
  • 0x8007F0DA
  • 0x8007f01e
• When you use Microsoft windows update on a Windows XP-based computer, the update process may fail and you may receive an error message "0x8007f007". This can happen regardless of what type of update you select.

The Svcpack.log file may contain entries that are similar to the following:

937.406: GetCatVersion: failed to retrieve version information from C:\WINDOWS\system32 \CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Tmp.0.scw.cat with error 0 x 57 937.437: GetCatVersion: failed to retrieve the version information of C:\WINDOWS\Tmp.0.scw.cat with error 0 x 80092004 940.344: InstallSingleCatalogFile: failure failed for Tmp.0.scw.cat; error = 0xfffffbfe. 940.344: DoInstallation failed failed: STR_CATALOG_INSTALL_FAILED 955.125: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2 955.125: DoInstallation: has no cancellation of registration of spuninst.exe for recovery. 962.656: cancel registration of uninstall-> Windows Server 2003 Service Pack, 0 962.656: impossible to install catalog files. 1448.406: message displayed to the user: cannot install catalog files. 1448.406: user Input: OK 1448.406: Update.exe extended error code = 0xf01e 1448.406: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.
Back to top

CAUSE

This problem may occur if one or more of the following conditions are met: Log...
This problem may occur if one or more of the following conditions are met:
• Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
• Cryptographic services is set to disabled.
• Other Windows files are corrupted or missing.
• The timestamp signature or the certificate cannot be verified, or is incorrect.
• The hidden attribute is set to the folder %windir%, or one of its subfolders.
• No unsigned installation behavior group policy setting (Windows 2000 only) is set to do not allow installation or warn, but allow installationor the policy of binary value is not set to 0 in the following registry key:
  The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
• The group policy enable trusted publisher lockdown setting is turned on, and you do not have the appropriate certificate in your trusted publishers certificate store. This group policy setting is under User Configuration, under Windows settings, Internet Explorer Maintenance, under Security, under Authenticode settings in the Group Policy MMC snap-in.
• You install Internet Explorer 6 SP1 and the update of security 823559 (MS03-023) is installed. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
  828031 (http://support.microsoft.com/kb/828031/) error "the software you are installing has not passed Windows Logo testing...". "message when you try to install Internet Explorer 6 Service Pack 1
• The software distribution folder is corrupted.
Back to top

RESOLUTION

To resolve this problem, use the following methods. Once you perform the operations...
To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

Back to top

Method 1: Rename the Edb.log file rename the Edb.log file, and then try again to install the program. To rename the Edb.log file, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following command and press ENTER:
   Ren %systemroot%\system32\catroot2\Edb.log *.tst

Back to top

Method 2: Set the Services of cryptography on AutoSet to automatic Cryptographic Services and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

1. Start the Administrative Tools utility in control Panel.
2. Double-click Services.
3. Click Cryptographic Services, and then click Properties.
4. Click Automatic for Startup type, and then click Start.

Note Windows 2000 does not list Cryptographic Services in the SERVICES Administration utility.

Back to top

Method 3: Rename the folder Catroot2 rename the Catroot2 (Windows XP and Windows Server 2003 only) folder and then try to install the program again.

Note Skip this method if the operating system is Windows 2000.

To rename the Catroot2 folder, follow these steps:

1. Click Start, click run, type cmd, and then click OK.
2. At the command prompt, type the following commands and press ENTER after each line:
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
3. Remove all tmp*.cat to the following folder:
   % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

   If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

Back to top

Method 4: Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 /u softpub.dll
   regsvr32 /u wintrust.dll
   regsvr32 /u initpki.dll
   regsvr32 /u dssenh.dll
   regsvr32 /u rsaenh.dll
   regsvr32 /u gpkcsp.dll
   regsvr32 /u sccbase.dll
   regsvr32 /u slbcsp.dll
   regsvr32 /u mssip32.dll
   regsvr32 /u cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

3. Restart your computer.
4. Click Start, click run, type cmd in the Open box, and then click OK.
5. At the command prompt, type the following commands and press ENTER after each command:
   regsvr32 softpub.dll
   regsvr32 wintrust.dll
   regsvr32 initpki.dll
   regsvr32 dssenh.dll
   regsvr32 rsaenh.dll
   regsvr32 gpkcsp.dll
   regsvr32 sccbase.dll
   regsvr32 slbcsp.dll
   regsvr32 mssip32.dll
   regsvr32 cryptdlg.dll
   output

   Note If you are prompted, click OK .

   Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

6. Restart the computer.
Back to top

Method 5: Remove the hidden %windir%\System32 and its subfolders attribute

1. Click Start, click run, type cmd in the Open box, and then OK.

   Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

2. At the command prompt, type the following commands, pressing ENTER after each line:
   attrib s h % windir %
   attrib s h %windir%\system32
   attrib s h %windir%\system32\catroot2

output
Back to top

Method 6: Set a strategy without driver signature silently succeed if you are running a version of Windows 2000, set the silent success no unsigned installation behavior group policy setting. This group policy setting located under Computer Configuration, under Windows settings, under security settings, under local policies, under Security Options in the Group Policy MMC snap-in. If you are running Windows XP or a later version of Windows, this group policy setting is no longer supported. In this case, follow these steps to resolve this problem:

1. Click Start, click run, type regedit, and then click OK.

   Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

2. Locate and then click the following key in the registry:
   The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
3. Right-click on the Policy binary value, and then click change.
4. The value data will appear in the following format:
   0000 02

   Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

5. Click OK, and then quit the registry editor.
Back to top

Method 7: Temporarily turn off Trusted Publishers Lockdown and install the certificates to your trusted publishers certificate store you can continue to use the group policy enable trusted publisher lockdown setting, but you must first add the certificates in your trusted publishers certificate store. To do this, disable the group policy enable trusted publisher lockdown setting, install the certificates in your certificate and then trusted publishers store on the setting of group policy enable trusted publisher lockdown again. To install the certificate suitable for Microsoft Windows and Microsoft Internet Explorer updates, follow these steps:

1. Download the product of Microsoft update you want to install from the Microsoft Download Center, the Windows Update Catalog or the Microsoft Update Catalog. For more information about how to download updates from Microsoft Download Center, click the number below to view the article in the Microsoft Knowledge Base:
   119591 (http://support.microsoft.com/kb/119591/) how to obtain technical support files from Online Services Microsoft

   For more information about how to download updates from the Windows Update Catalog, click on the number below to view the article in the Microsoft Knowledge Base:

323166 (http://support.microsoft.com/kb/323166/) how to download updates that include drivers and hotfixes from the Windows Update Catalog
• Extract the package to update product in a temporary folder. The command line that you use to do this depends on the update that you are trying to install. View the Microsoft Knowledge Base article associated with the update to determine the command line switches appropriate that you will use to extract the package. For example, to extract the 824146 security for Windows XP update to the C:\824146 folder, run Windowsxp-kb824146 - x 86 - enu - x: c: \824146. To extract the 828750 security for Windows XP update to the C:\828750 folder, run q828750.exe/c t:c:\828750.
• Right click on the file KBNumber.cat to the package to update product to the temporary folder you created in step 2, and then click Properties.

  Note The KBNumber.cat file may be in a subfolder. For example, the file may be in the C:\824146\sp1\update folder or in the C:\824146\sp2\update folder.

• On the Digital Signatures tab, click the digital signature and then click Details.
• Click view certificate, and then click install Certificate.
• Click Next to start the Certificate Import Wizard.
• Click place all certificates in the following store, and then click Browse.
• Click approved publishers, and then click OK.
• Click Next, click Finish, and then click OK.
Back to top

Method 8: Check the status of all certificates in the certification path and import missing certificates or damaged from another computer to verify certificates in the path of certificate for a Windows or Internet Explorer product update, follow these steps: step 1: Verify Microsoft certificates

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, double-click Microsoft Root Authority. If this certificate is missing, go to step 2.
4. On the general tab, make sure that the dates valid from are 10/01/1997 to 12/31/2020.
5. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.
6. Click OKand then double-click the NO LIABILITY ACCEPTED certificate.
7. On the general tab, make sure that the dates valid from are 11/05/1997 to 01/07/2004.
8. On the Certificate path tab, check whether the certificate has expired or is not yet valid or this certificate is OK appears under certificate status.

   Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

   293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
9. Click OKand then double-click the GTE CyberTrust Root certificate. You can have more than one of these certificates with the same name. Check the certificate that has an expiration date of 02/23/2006.
10. On the general tab, make sure that the dates valid from are "23/02/1996-02/23/2006."
11. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

    Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
• Click OK, and then double-click Thawte Timestamping CA.
• On the general tab, make sure that the dates valid from are "31/12/1996 to 12/31/2020."
• Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

Step 2: Import the missing certificates or damaged if one or more of these certificates are missing or corrupted, export the missing certificates or damaged on another computer, and then install the certificates on your computer. To export certificates to another computer, follow these steps:

1. In Internet Explorer, click on Toolsand then click Internet Options.
2. On the content tab, click certificates.
3. Certificate authorities roots of trust tab, click the certificate you want to export.
4. Click export, and then follow the instructions to export the certificate as a DER encoded Binary x.509 (.) REB) file.
5. Once the certificate file has been exported, copy it to the computer where you want to import.
6. On the computer where you want to import the certificate, double-click the certificate.
7. Click install Certificate, and then click Next.
8. Click Finish, and then click OK.
Back to top

Method 9: Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

1. Remove all tmp*.cat of the following folders:

   systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

   systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

2. Delete all the kb*.cat files in the following folders:
   % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
   % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
3. Remove all the oem *. * files in the % systemroot %\inf folder.
4. At the command prompt, type the following commands. Press ENTER after each command.
   net stop cryptsvc
   Ren %systemroot%\System32\Catroot2 oldcatroot2
   net start cryptsvc
   output
5. Restart the installation of the patch failed or the installation of the service pack.
Back to top

Method 10: Empty the software distribution folder

1. Click Start, click run, type services.msc and click OK.

Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

• In the Services (Local) pane, click automatic updates, and then click stop.
• Reduce the Services (local) window.
• Select all the contents of the Windows distribution folder, and then delete them.

  Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

• Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
• In the Services (Local) pane, click automatic updates, and then click Start.
• Restart the computer, and then run Windows Update again.
Back to top

Method 11: Perform an upgrade on site for more information about how to perform an upgrade on the spot, click on the number below to view the article in the Microsoft Knowledge Base:

315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP
Back to top

MORE INFORMATION

For more information about a resolution that is intended for Windows 2000 only.
For more information about a resolution that is intended for Windows 2000 only, click on the number below to view the article in the Microsoft Knowledge Base:
281458 (http://support.microsoft.com/kb/281458/) error message when you install a service pack Windows 2000 or product update
This problem has been reported to occur with the following updates:
328310 (http://support.microsoft.com/kb/328310/) MS02-071: a failure in management of Windows WM_TIMER messages may allow elevation of privileges
810565 (http://support.microsoft.com/kb/810565/) of the hyperlinks open in Internet Explorer instead of in default browser or Help and Support Center
327979 (http://support.microsoft.com/kb/327979/) game stops responding (hangs) or when the introductory video is played
322011 (http://support.microsoft.com/kb/322011/) you cannot preview a fax in the Fax Console
811630 (http://support.microsoft.com/kb/811630/) HTML Help update to limit functionality when it is invoked with the window.showHelp method)
810577 (http://support.microsoft.com/kb/810577/) MS03-005: a buffer uncontrolled in the Windows Redirector may allow elevation of privileges
329441 (http://support.microsoft.com/kb/329441/) you cannot create a network connection after you restore Windows XP
329170 (http://support.microsoft.com/kb/329170/) MS02-070: a flaw in SMB signing may permit group policy to change
810833 (http://support.microsoft.com/kb/810833/) MS03-001: buffer uncontrolled in the Locator service may allow code to run
For more information about configuring automatic updates in Windows XP, click on the number below to view the article in the Microsoft Knowledge Base:
306525 (http://support.microsoft.com/kb/306525/) how to configure and use automatic updates in Windows XP

Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• Patch KB2656369 says he installs, but comes back eager to install again. On the PC, it shows not installed, but it shows on the WSUS server, installed OK.

  Have tried everything I can find on the Microsoft website to obtain this security patch installed without success.  Patch was released on 12/06/12.  Patch is for .net Framework 2.0 Patch fails on several XP machines.

  Seeing how Microsoft Answers is for the side Windows and not on the side of the business consumer, I would recommend post on the Microsoft Technet forums, given that their community is more tilted to the professional field.  You can also try posting on the Site of the Support of Novell.

• 12.2 installation fails on Oracle Linux 7

  Setup passes all the checks, trying to install and fails to 38% with this message in the logs:

  account <>

  < date > 2015 - 12 - T 06, 18: 50:55 < / date >

  < millis > 1449445855483 < / millis >

  < sequence > 381 < / sequence >

  Oracle.apps.Fnd.txk.install < recorder > < / recorder >

  < level > NEWS < / level >

  oracle.apps.fnd.txk.util.TXKProcess < class > < / class >

  execute < method > < / method >

  < thread > 10 < / thread >

  /D01/Oracle/vis/FS2/FMW_Home/webtier/OPatch/opatch.pl perl < message > apply process is completed (1) - verbose - silent - ocmrf /d01/oracle/VIS/fs2/inst/apps/VIS_pennoracle/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / d01/oracle/SCREWS/fs2/FMW_Home/webtier/jdk/d01/oracle/SCREWS/fs2/inst/apps/VIS_pennoracle/temp/patches/7695070/7695070

  Stdout: / d01/oracle/SCREWS/fs2/FMW_Home/webtier/jdk/bin/java is not a valid executable for this platform. OPatch cannot continue!

  OPatch returns with error code = 1

  Stderr: < / message >

  < / recording >

  account <>

  < date > 2015 - 12 - T 06, 18: 50:55 < / date >

  < millis > 1449445855484 < / millis >

  < sequence > 382 < / sequence >

  Oracle.apps.Fnd.txk.install < recorder > < / recorder >

  < level > SEVERE < / level >

  oracle.apps.fnd.txk.config.InstallService < class > < / class >

  printError < method > < / method >

  < thread > 10 < / thread >

  < message > oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /d01/oracle/VIS/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /d01/oracle/VIS/fs2/inst/apps/VIS_pennoracle/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / d01/oracle/SCREWS/fs2/FMW_Home/webtier/jdk/d01/oracle/SCREWS/fs2/inst/apps/VIS_pennoracle/temp/patches/7695070/7695070

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  < / message >

  < / recording >

  I deleted all the files and restarted the install several times and it does not reach this point every time. I checked that it is Oracle java OpenJDK not on the trademark system and am running out of ideas.  I have everything will remove the scene rebuilding after that re upload all files, but in the meantime I'm looking for advice. Thank you.

  Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

• adoption apply phase failed. market to follow

  We are in the middle of the patching recommended on EBS R12.2.4 instance with 12.1.0.2.0 db. We conducted under activities up to now:

  adoption phase = prepare

  adoption phase = apply patches = 1

  adoption phase = patch = 2

  adoption phase = patch = 3

  .

  .

  .

  .

  .

  One of the patch failed:

  adoption phase = patch = 20592764

  We applied 30 patches up to now in adoption apply phase an and I still have to apply other hotfixes. Patch 20592764 failed due to incompatibility with the line of code R12.2 C.

  
  Error: AutoPatch error:
  --------
  This patch is not compatible with your current codelines.
  
  This patch is compatible with: "ad" - line of code entity ' R12. AD. B'.
  Your line of code on the current site for the entity 'ad' is: ' R12. AD. C
  

  It comes to the current state of the adoption:

  bash - $4.1 adop-status

  Enter the password for APPS:

  Current patch ID of Session: 75

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  appsnodex master PREPARE FINISHED 1st Aug 15 20:27:59-05:00 1 August 15 20:52:23 - 05:00 0:24:24

  APPLY THE FAILURE 1 AUG 15 20:57:48 - 05:00 2 AUGUST 15 05:05:53 - 05:00 08:08:05

  FINALIZE NOT STARTED

  COMMISSIONING IS NOT STARTED

  CLEANING NOT STARTED

  Folder synchronization system used in this Patching Cycle: full

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /dhdr2i/applmgr/fs_ne/EBSapps/log/status_20150802_072959/adzdshowstatus.out

  Please wait...

  Done...!

  adopted out with status = 0 (success)

  We do not use cancel that we already applied 30 patches and it will start the cycle from scratch. We are yet to apply the fixes over 40. Also several times giving up is leading to corruption of data dictionary in our case and a bug is already raised with Support from Oracle.
  We can use: adopted phase = apply restart no = no = yes patches abandonment = 20592764

  Please suggest how to proceed with patching. Now we're stuck.

  Concerning

  Purnima Johari

  I suggest you start with the next patch using the 'abandonment = yes"parameter.

  It seems that I forgot to mention that in my previous post!

  Furthermore, why apply AD. Delta.6 instead of delta.5?

  Kind regards

  Bashar