Unable to run my project on Simulator

Similar Questions

• I'm unable to running Java; I get a ClassNotFoundException error.

  After updating to the latest version of Java (7.10), I am unable to run Java at all. Upon detection of Java (http://java.com/en/download/testjava.jsp), I get an error message and when I click, it says there is a ClassNotFoundException error. I tried to reinstall Firefox, reinstall this version of Java and some older versions, try Chrome and IE9, and in any case, I met the same problem. On my addons, it appears as usual, and installation works very well. Both:

  • Next-generation Java plug-in for browsers Mozilla 10.10.2
  • Deploy Script NPRuntime plugin Library for Java (TM)

  Are enabled, next to the browser settings on the parameters of control of Java, and I cleared the cache as well. I tried all the relevant patches on http://java.com/en/download/testjava.jsp. I have absolutely no idea what to do. I've tried everything. Anyone of you have any suggestions?

  Hey all, I just wanted to post the solution I came to. I found another thread which solved my problem (https://forums.oracle.com/thread/2397610), in particular the last post. It boils down to this line:

  "I used the tip above to add in the Panel / Java / Java / View / Runtime settings the value - Djava .net .preferIPv4Stack = true for my 2 JRE then saved and restarted my browser and suddenly he worked.*.

  It suddenly worked for me also. Good luck!

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• Unable to run code

  I just bought a USB-6501. At this point, I am unable to run a number of examples of code that accompanies the latest NIDAQ902-1 package.

  In particular, I am unable to run in VB code "ContWriteDigChan_PipeSampClk". I'm currently running;

  Microsoft Visual Studio 2008
  9.0.21022.8 RTM version
  Microsoft .NET Framework
  Version 3.5

  Installed Edition: professional

  Microsoft Visual Basic 2008 91605-031-5000002-60668

  Loading the code it works "Upgrade Wizard" which is perhaps the root of the problem. It seems to be upgraded to form Net1.0 to Net3.0.

  When I run the code I get an exception error when the code is provided to the line of code;

  myTask.Timing.ConfigurePipelinedSampleClock ("", CType(samplesClockRateNumericUpDown.Value, Double), SampleClockActiveEdge.Rising, _ ")
  SampleQuantityMode.ContinuousSamples, CType (samplesPerBufferNumericUpDown.Value, Integer))

  where myTask => Assembly NationalInstruments.DAQmx

  I get the exception error is;

  Requested value is not supported for this property value.  Well: NationalInstruments.DAQmx.Timing.SampleTimingType you asked: NationalInstruments.DAQmx.SampleTimingType.PipelinedSampleClock you can select: task NationalInstruments.DAQmx.SampleTimingType.OnDemand name: _unnamedTask<0> Code of State:-200077

  I tried in vain to remedy the situation by following the instructions above. Have you advice on how to solve this problem?

  Not sure where you get the number 4ms. Time to do a writing (~1.4 ms) is how much time it takes to write a little and conforms to these criteria.

• I am unable to run Windows Search. No matter how I open it, it says "Windows Search does not work."

  I am unable to run Windows Search.  No matter how I open it, it says "Windows Search does not work."

  What is Windows Desktop Search 4.0 that you have installed with your updates.

  If it is uninstall it from Add / Remove programs.

  The update is KB940157

  If it does not show then show updates is on top, use the method below.

  Click Start , type cmd.
  Now in the result of the research with right-click on cmd.exe and select run as administrator if you are not the administrator.
  Type regsvr32 /u "%programfiles%\Windows Desktop Search" and press enter

  You search old back, see if it works.

  The next time you do the Search 4.0 updates appears again.

  You can try it again if you wish.

• Unable to run the system restore, or any audio file...

  I am unable to run the system in normal mode or safe restore.  When I try to run rstrui.exe a pop up box appears and wants to know what program I want to run this file.  Also when I go to my control panel I can't open anything even not my add or remove channels I get an error msg saying c:\windows\system32\rundll32.exe - application not found - even when im in safe mode appears the same box... help would be appreciated... :-)

  It sounds like you lost the file association for .exe files.
  Visit the following site and follow the instructions to restore your .exe file associations.  Be sure to read the note at the top that applies specifically to the .exe file associations:

  <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• Can't find my CD-Rom Windows XP Professional, so I am unable to run a SFC scan to correct the bad image

  Can't find my CD-Rom Windows XP Professional, so I am unable to run a SFC scan to correct the bad image. Help, please! the files are corrupted and I can't fix. Is there a website link, I can go to, to download what I need in order to access cmd sfc/scannow? Thank you very much

  Hi ferfeferferfer,

  You can see the following article for more information on the software.

  How to replace hardware or lost, broken, or missing Microsoft software

• Windows - (various) corrupted file errors. Unable to run chkdsk. Windows XP Home Edition

  Hello

  I hope someone can help me with these error messages; which seem to vary what I do on my computer.  First error message is Windows - file corrupted the file or the directory c:\Program files Symantec Shared Shared\EENGINE\EPERSIST common. DAT is damaged and unreadable. Please run the chkdsk utility. The second error Google Update.exe - corrupted file as the c:WINDOWS\Temp\GUR2.tmp file or directory is corrupted and unreadable. Please run the chkdsk utility.  Unable to run chkdsk by using my computer or command prompt.  System message - cannot open volume for direct access or CHKDSK cannot continue in read-only mode.  Running fsutil dirty query c: Volume-c: is dirty message.  I also have experience from time to time a process loop at startup where the computer keeps turning off and then restarting.  Thank you

  Hello

  ·        Since when are you facing this problem?

  Method 1:

  You can run the check disk by booting in safe mode and check if that helps. To start in safe mode follow the link given below.

  http://support.Microsoft.com/kb/315222

  Once you start mode without fail, try and run the disk check and check errors.

  Method 2:

  If you are not able to run the check disk in safe mode, you will need to boot into the recovery console, and then run check say. To do this, you need the Windows XP installation disc. The enforcement procedure checks the disk in the recovery console.

  (a) Insert the Windows XP CD-ROM into the CD-ROM drive and restart the computer.
  Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

  (b) when the "Welcome to Setup" screen appears, press R to start the Console history.
  Note: If you have a dual-boot or multiboot, select the installation that you want to access from Console history.

  (c) when you are prompted to do so, type theAdministrator password. If the administrator password is blank, just C:.

  (d) to historic Console command prompt, type the following then C::

  Chkdsk /r

  (e) allow to run INTACT until the completion

  (f) report any error

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP sp3, lost some critical DLLs. Unable to run utilities such as msinfo32.

  I have Windows XP sp3. All of my non-system software working, IP broadband connection works as well. My problem is that I lost some critical DLLs. I've known this for about a year or two. I can't run MSINFO32 or other basic system utilities. Now I'm worried because I can't get MS Firewall online after removing the CA security suite and go MS Security Essentials. I can't use scannow, the System File Checker. It will not work. Please give me some suggestions on how to rebuild the system DLL.

  pawneejeff,
  Thanks for posting on the Microsoft answers Forum.  When you try to run SFC this error message you get?  Also, when you start the command prompt you you sure to right click on the icon and run as administrator.   You have access to your XP CD?  If Yes, you can boot from the disk and go in the recovery and then console run SFC/scannow from there.
  If you are unable to run SFC, then you may need to do a repair of XP installation.  Here are the links that cover SFC and installation options.

  http://support.Microsoft.com/kb/310747
  http://support.Microsoft.com/kb/315341 Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to run windows update error code A 8024, 000

  Original title: 8024A 000 error

  I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.

  Hi all.

  solution:

  Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version

  of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.

  This works.

  The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.

  This driver 11 version solves the problem with windows Update error A 8024, 000.

  (have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).

• for Windows 7 bootable USB key. He says that we are unable to run bootsect

  When I do my USB bootable for Windows 7. He says that we are unable to run bootsect to make the USB drive bootable.

  what I would do.

  Former title: usb install

  This happens because you try to create a x 64 based installation drive of Windows from a PC running x 86 based Windows. x 86 Windows failed to install the correct version of the bootsect for the version of Windows that you are trying to install on USB drive. To address the issue, restart the process from a computer running x 64 Windows.

  See you soon!

• An Android apps runs with Z10 and Simulator, but does not start woth Q10

  My worn for Android application works very well with Blackberry 10 Simulator, my housing on the portal is rejected but the application does not launch with Q10, works however with Z10.

  I checked my code for all uncaught operators who may cause a failure to start, but could not find.

  Do you have ideas on why an application running with Z10 or Simulator would not start with Q10?

  Thank you, imre.

  The size of the screen was really the question. I put Blackberry 720 x 720 for the emulator, the repeated problem, and I fixed it.

  It's all good now!

• The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed.

  Hello world

  The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed"?

  OR

  Is there a way to convert my panels that works perfectly in CC2015 up to the CC2015.5version?

  I hope someone can give a solution, because everything that I could find were unanswered questions.

  Thank you all for your generous contribution

  Stone

  You have set the indicator of debugging for 2015.5 CC: HTML Panel advice #21: Photoshop CC 2015.5 survival guide | Photoshop, etc ?

• File not found - when you try to run the project

  I get the following when I try to run the project.  You know a solution to this?  I think from scratch and cut and paste all my code in different applications, components and scripts etc.  Thank you.

  

  I tried on my system, I changed the file to the file .htm .html and discovered that the url must be correctly pointing to the location of the file.  I think that

  the file:/k:dev line is wrong in the run configuration, it must be simple k:\... something in the run configuration.

  

  Also, can you show me your run dialog box - config? as a screenshot?

• Exception in thread when run the project

  HY everyone...
  
  When I run my project give me this exception:
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Exception in thread "ExecuteThread [ASSET]: '7' for the queue:"(self-adjusting) weblogic.kernel.Default"" means: PermGen space.
  
  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  and when I try access weblogic give me this error:
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  
  
  What is happen?

  Myk,

  Have you tried [url http://blogs.oracle.com/shay/2009/03/solving_permgem_errors_with_th.html] increasing the space of perm gen

  John