7520 HP e-all in one printer

Similar Questions

• 7520 Photosmart HP all in one printer

  When I try to print a document, I get a message "to install paper in the photo tray.  I set the preferences in the main tray, letter size.

  The printer was working fine last night.

  Hey there @Junedick ,

  Thanks for getting back to me!

  I suggest you start with the performance of the print and Scan Doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  Please let me know the results of the execution of the tool and also try to print after!

  Have a great day!

• Photosmart 7520 e all-in-one printer not turn on, green transformer upward and then turns off.

  7520 E Photosmart all-in-one printer not turn, transformer green light comes on then off again once, unplug the left and I tried once again even.

  nothing is dead.

  Hi woldtopper,

  I understand your Photosmart 7520 is not turning on and will remain lit. Please follow the steps in troubleshooting in the following document; The HP printer will not be running or to respond when the power button is pressed.

  If the problem persists, I recommend calling HP and let know, the issue and the steps you have already performed. It may be able to let them know that you completed all the steps in the HP document #c01321436.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• 7520 photosmart e All in One: driver Photosmart 7520 e all-in-one

  I've been going round in circles around this hp website that keeps taking me around and in the same places without being able to find a link to download driver 7520 Photosmart e All In One Printer.  It was so much easier - now I can spend hours trying to achieve and I'm on this forum ask for help for someone who just sent me a link to download the driver help please!

  Hello

  You can download the drivers for the Photosmart 7520 directly from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL43773/MP-108670-3/PS7520_1315-1.exe

  Kind regards

  Shlomi

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• HP Photosmart 7520 malfunctions of e-all-in-one printer on the clock

  This e-all-in-one printer from HP Photosmart 7520 bought last week and cannot issue to reslove the awakening. Printer goes to sleep as the value, and to wake up, BUT with an error message on the display. I tried AUTO ON / OFF and different sleep wait times but nothing helped.  I can't believe the USB cable or the PC/software is to blame because the wake-up printer, but in a State of dysfunction and should now be in the off position, then press. The answers to this problem.

  JMcKenzie2006,

  Welcome to the HP Forum.

  The following workaround solution should correct the problem - basically how to turn off the sleep function.  It works when all other options have failed to solve the problem: assigning static IP, small insect sacrifice, swearing, all sorts of settings...

  Be aware: I do not know the consequences - if any - turning off the sleep function.

  Printer PhotoSmart 7520 loses wireless - system Mode Timeout Set to zero

  Apologize up front for imprecise language and the way in which this must be done: is a solution and not a standard procedure.  Its use is optional.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• 7520 HP photosmart e-All-in-one: printer Photo ink for all print jobs

  Why my printer uses ink cartridge photo instead of the regular cartridge for all print jobs? I need to change a setting? He uses ink photo when I print documents or photos on the internet and it's always the first cartridge to change. How can I get it to stop and use the regular ink cartridge?

  Hi @ohchango,

  Welcome to the Forums of HP Support!

  I see that you are curious about the black photo cartridge on your HP Photosmart 7520 e-all-in-one printer. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Photo black cartridges are designed to be used, it cannot be bypassed or ignored. When printing from your computer, you can set it to print in grayscale (black ink only), meaning that it will use less of the photo in the black, but they will still get used for maintenance. For more information, see use of inkjet printers ink.

  NOTE: It will use the black photo cartridge for printing black if photographic Support is selected for the type of paper or printing is set to auto or to a picture frame.

  In order to help you, I'll need more information.
  What operating system do you use?
  Mac OS X: How to find which Mac OS X Version is on my computer?
  Windows: How to find the Windows Edition and the Version on your computer.

  If you need assistance, please let me know the instructions above. I look forward to hear from you.

• 7520 HP all-in-one printer prints photos not good with my Windows machines

  I have several computers.  Everything works fine with the printer in the Windows environment.  I have an iPad and a MACbook PRO with Maverick 10.9.4.   The pictures are terrible when I print with one of these devices.   It looks almost like a negative image.   I checked for the drivers updated, etc. for the Mac.   The ink is HP and levels are good.  It works fine with my PC computers, but not my Apple devices.   I checked the preverences of the APPLE system.   It does seem that the photographs.  Text prints very well.  Any suggestions?

  Hello cpsimonand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you run in photo printing questions. I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update.

  After the updates, I recommend reinstalling the Photosmart HP 7520 e-all-in-one printer drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• 7520 HP pHotosmart e-All-In-one: printer HP B209 failed, bought 7520 e - All - In - One... not as many preferences

  Recently, my B209a Photosmart is not printing black ink, so I bought a Photosmart 7502 refurbished e-all-in-one printer.

  1st problem: printing photos the size I want...

  When you type "Print-p", the menu that appears asking me to specify a layout (for example, custom, Best Fit, scale, etc.). When I choose "Custom" and specify the width and height I want, I can go in "Printer", then "Configuration", even if I match the width and height under paper and the Source size, it errors out and does not print because sizes do not match.

  2nd problem: when you print 'NOTHING' (letter or photo), there is not nearly enough printing preferences that I have with my B209a. With the B209a printer, I was able to customize almost every preference printing I wanted, including setting up my own (which was "printing black-fast"). I get none of these choices with this printer. Just about the only choices I get a 'paper source', 'paper size' and 'direction '. I don't even have the choice "quick print", which was supposed to use less ink.

  I am 'really' disappointed by this 7502e.

  All of my fault. For some reason, I took the photo paper I had in the machine has been of 3.5 x 5.

  It has been 4 x 6.

  I wa contacted by a representative from HP who told me I called a support agent.

  Once Mario's HP took over my machine and these changes, the pictures are exactly the way they were supposed to.

  Initially, I was not only very surprised to get a solution to the problems that I had, but to be sent by electronic mail and then called by a support agent to fix, just a few days. And to be informed that if the problems were not fixed, I replaced printer.

  This was among the best support I have ever received from 'none' company.

  Thanks to Jamieson, Alan and Mario!

• E-all-in-one printer want 5530: wireless set up for jealousy 5530

  Our new HP Envy 5530 printer works very well connected via a USB cable, but cannot be found by trying to set up as a wireless option with either my Lenovo H5 PC (via a Netgear A6200) or a laptop Lenovo W540.

  The printer connects to the same / correct SSID (BT Hub 3.0) and I tried to remove the firewall to see if it was what kept the whole upward.

  Any help would be appreciated.

  Welcome to the community @Matticus HP

  I read your post on how your printer is not detected when you try to set up wireless. I want you to try the steps in the guide below you should get properly connected wireless.

  A 'printer' display the error to the HP ENVY 5530 e-all-in-one and Deskjet Ink Advantage 4510 e-all-in-One Printer Series

  You can also see another thread, that I posted and check your router settings if the guide above did the trick:

  Re: HP 7520 loses connection wi - fi

  Good luck!

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• HP 5740 all-in-one: print HP 5740 Air has stopped working

  Well worked for 8 weeks, now when I try to print a page of reception or what ever, it shows all the print pages option, shows the name of the printer, but nothing happens to the printer if I ping the printer, it will not receive all the packs to date, the router receives all packets, I printed out the Page of Configuration of HP network , it showseverything turned on and connected.

  Hey @jmichaelmcf,

  I see you have some problems with your Mac OSX 10.11 machine printing to your Officejet 5740 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet, not a surge protector. Once done:

  1. Turn off the printer and the Mac.
  2. While the devices are turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer and the Mac.
  4. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  5. Hold down the CTRL key and click the icon of your printer on the left.
  6. Click on reset printing system.
  7. Click on the button "+" at the bottom left.
  8. In the window that appears, select your printer in the list.
  9. Click in the box next to and select your printer from the list.

  Please let me know the results of the rest of the foregoing. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP Envy 4500 All in one Printer

  Hello, I have a HP Envy 4500 all in one printer that is only a year and have had many problems with.  Recently, when I turn it on, it displays an error code; 0XB3F4F4F8. I have not found what means this error code. ? I tried to unplug and then turn on to get the Welcome screen, then it said error code and does NOT stop automatically. I have to unplug it to stop it. Any help would be greatly appreciated!

  Hi!, jenwad87:

  Refer to the HP printer... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/document/c00489814

  Please, contact with the help of HP, of... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/troubleshooting