8 1401 HP ARE Tablet

Similar Questions

• Thus, bought the CC package, but not able to load on my LG tablet, or my smart phone Samsung...? What are tablets or smart phones are able to run mobile applications?

  Looking for ideas to be able to run mobile applications for this also. thoughts anyone?

  Hello

  There are only few applications that you can use on your mobile /tablet.

  Please visit:-Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

• What is the phone a Tablet?

  What are the criteria here, what is a phone a telephone, when is a Tablet? Is a function of the resolution?

  

  Thank you

  Haha

  For iOS, iPads are tablets and iPhones are phones.

  For Android, any device with a 600 dpi screen width or less is considered to be a phone.

  For Windows, the phones are not yet supported, so any device running Windows 8.1 is considered to be a tablet.

• Windows ip address conflict?

  so I get another machine has the same conflict ip message? I do not understand because I initially configured static ip on my computer. Is there any other computers around. only the devices that access our router are tablets or phones using wifi. I have since switched back to dhcp, released/renewed the investigation period. just to be safe and will continue to receive these messages... I checked my page (router) of the entry door and it is I believe on dhcp not sure if when I got static that I also change in static on the page of the router? But anyway I tried to do some research on this question, I went to the view but not sure what events; particularly critical/warning shall apply. I see that there are protocols relevant to internet as tcip ect but not sure where to go from here.

  would like to solve this problem?

  * This could possible with why I keep having to reset the router so my tablets can connect to wifi?

  * my computer never sleeps, so do not think that it can assign an ip address to another computer.

  I hope it's resolved!

  can I assign a static ip address to a tablet that connects via wifi? and I thought that static has helped to prevent this as opposed to dhcp I read has a small tendency to double posting?

  DHCP is not "double attribution."

  If you have devices with static IP addresses and other devices that IP addresses are assigned automatically by the DHCP server on the router, you need TO ensure that you assign them static IP addresses as well (a) are in the same subnet used by the router and (b) outside the range of IP addresses used by the DHCP server on the router.

  You determine the above requirements by examining the web configuration of the router utility.  For example, it is the utility of configuration for a Linksys WRT54G:

  

  If it's your router settings, you can assign a static IP address the following: 192.168.1.2 - 192.168.1.50, 192.168.1.99-192.168.1.254

• How to list all the users on the Windows 8 Pro welcome screen

  I work for a small company based in the House of my boss of IT services. Because he runs the company, all the computers in the House are on a domain Active Directory (ease of management and control). Because he runs the company from his home, several of these computers are tablets/touch screens for his children, all upgraded to Windows 8 Pro.

  Currently, the default behavior of Windows 8 at startup is to display the Welcome screen showing the last user who opened a session with an option to switch to another user. If "Other user" is selected, a complete login prompt appears requesting a user name and password. This is standard fair for Windows 8, especially on a domain.
  He wants to do me is to find a way to allow a style of Windows XP (workgroup) Welcome screen displaying all the available avatars with user accounts, allowing so a child to click easily their user account and enter a picture password without ever seeing the on-screen keyboard.
  To rephrase: we want the Windows 8 Pro welcome screen to list all the (or specific, if possible) allowing anyone of you users connect to the computer without entering a user name and only enter a password (or picture password).
  I searched the web carefully and it seems that Microsoft can have deprecated this feature in an update of Windows 7 - many people shouting right lose their old welcome screen after an update. I read in the case of registry (removal of corrupt profiles and .default) hacks, security policy settings (interactive logon: do not display last user name = disabled), account policy (control userpasswords2 > uncheck: users must enter a password...) and a few other suggestions that had mixed results, which none apply to the present case , either because the settings are already in place, or because they are not available due to being on a domain.
  I'm open to exploration of any kind of registry or 3rd party software hacks that can provide this functionality. Win8 default behavior is absolutely horrible for tablets - it should be easy for multiple users to connect to a device without using a screen keyboard to enter their username and password. WIN8 is halfway there with passwords of photo, but we still have to enter a user name for all, but the user recently.
  Thanks in advance!

  Hi Jayce Nornin,

  Please be informed that he has no option to list all the users on the Windows 8 Pro welcome screen.

   

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• How configure tabbed pages to print correctly?

  HI -.

  The pdf more complex that I have ever met (and harder than I ever searched on this forum) contains the TABS.  I don't want by tabs tabs in the window tab index, tab indents, paws on setting preferably, dialog boxes the tabs in the menu or the tabs in the browser.

  The tabs, I ask those who are labeled "flaps" are protruding along the right edge of a printed document in order to facilitate the location of specific sections in the printed document.  Text is printed on the tabs rotated 90 degrees.  The paper on which the tabs are printed is generally a thicker and, by necessity, is WIDER THAN TYPICAL 8.5 "-so that the tab comes forward on the right edge of the printed document."  The text rotated (the legend of the tab) must be beyond the 8.5 width "to be visible in the tab when the book is bound.

  I hope that I have not insulted anyone with my description, but I felt it necessary because "tabs" gives no relevant search results as well.  Now to my situation and the question.

  The PDF I'm faced with a total of 300 pages, and 12 of them are tablets - to be printed on a tab.  The legend of the tab is already turned properly and positioned on the page where the tab should stay ABOUT - with the exception of one of the key issues.  The problem is that the widths of the PDF pages that will be the tabs are 8.5 "wide on the screen and the stock of tab to be printed on is 9" wide.  The question is how the legend to print beyond this page 8.5 "wide?

  I use a Canon varioPrint 135.  It's a production machine pretty hefty with trays for different media sizes.  So I put the paper in the Tray 1 and the stock of tabs in tray 2.  The result is that the stock of tabs is inserted where there should be some simple pages but the legend of the tab is not printed in position on the tab but about. 35 "on the left.  In other words - the printer has correctly interpreted the PDF page width is 8.5 "printed in this width, even if she was instructed to use and well connected, a paper stock that is 9" wide.

  As I see it - the solution is to expand those tab pages in the PDF so that the printer can see 9 "wide and print the Legend tab accordingly on the Media 9".  Is it a correct assessment?

  What tool Acrobat, functionality, software, plug-ins or setting should I use to change the width of pages in a PDF file?  Is it still possible to do this with Acrobat?

  Thanks in advance for your comments.

  Josh

  Hi Josh, this should be pretty easy to do - however, due to a bug in Acrobat, it's a two-step process:

  Open the document in Acrobat and implement the tool 'Set Page boxes' (via Tools > organize Pages > Set Page boxes, or by right-clicking on a page in the "Thumbnail" pane and selecting "Crop pages"). Select this option to change the size of the page using a custom size. Make sure that you select "Center" to the old page to the new, larger page and specify 9.5 "x 11" (Yes, it's too big, and we will correct it in the next step):

  

  Now apply this change to your tab page and set up the tool "Set boxes Page" again. This time, we change the culture box so that only the 9 x 11 "page - with the text of the tab in the right position - shows:

  

  To get the correct size, remove 0.5 "from the right edge.

  Again, apply the settings, and you should have a page of tabs correctly formatted and size.

  The bug in Acrobat, it's that you cannot specify a x_offset custom in the first step. This would allow us to just resize the page to 9 x 11 "and the offset of 0.5" and make, but which moves the contents of the page completely outside the clipping rectangle, and you end up with a blank page.

  I extract all pages in tabs in a separate document and then perform these two steps on pages in the temporary document and then replace the existing tabs in the corresponding pages of this temporary document.

• X 60 digitizer pen works not

  I and X 60 and used it for about 6 months now. A month ago my pen started having problems. The track became very erratic and during the use of the writing area Tablet couldn't tell if I was contact or not. He would not write about or continue to scribble all over, after lifting the stylus on the screen. After a short time the pen has stopped working completely. I went out and bought another pen and it worked fine for 2 days. Similar to the last pen, ease of use has started to become very erratic. There follow a few when you move the stylus on the screen (without contact), but I can't write anything without a time, nothing at all or loads of freehand drawings. Curiously, when turn the pen autour, I can actually use the back of the thin pen but using this ways he's clumsy.  Can anyone offer advice?

  Thank you

  Problem solved: for me at least.  The previous owner had installed a Wacom driver v2.8.0.5 as the touchscreen display driver.  The problem disappeared once I installed the version 3.0.0.3 multitouch display driver of Lenovo.  It can be downloaded here: http://tinyurl.com/7lhuvc6

  I hope this helps someone else.

• SimpleTap for thinkpad edge e530

  I just got my Lenovo Thinkpad Edge E530 and downloaded single tap. It does not work when I touch the screen with my fingers. I did some research online and realized that some computers do not have a touch screen. does anyone know if my computer has a touch screen and if so how to solve the simpletap so I was touch my screen with my fingers and make work? Thank you!

  Welcome to the community!

  I believe that the portable only in several Lenovo product lines that have multi touch (pen + finger) screens are Tablet PCs, like the X230T and some of the IdeaPads. If I'm wrong, I'm sure an expert Lenovo is soon be along to correct me, but at this point, I'd say you not 'touch' ability on your edge.

  HTH to clarify the bit.

• size of the dump file

  Hello
  10g R2 on AIX 6.1, I use the following EXPDP:
  

  expdp system@DB SCHEMAS=USER1 DIRECTORY=dpump_dir1 DUMPFILE=exp_USER  Logfile=log_expdpuser

  that translates into a 3 GB dump file. Y at - it an option to decrease the size of the dump file?
  
  I saw in the documentation:
  
  COMPRESSION =(METADATA_ONLY |) NONE)
  
  but it seems to me that COMPRESSION = METADATA_ONLY is already used, since this is the default COMPRESSION = NONE will not reduce the size
  
  Thank you.

  Thank you all.

  Even the datapump file 10g are tablet with high...
  Close the message. If the answer.

• Devices that are compatible with the Tablet HP Jet 7 Signature Edition

  With HP Jet 7, what Bluetooth wireless keyboard and optical mouse will work with it?

  Also, I buy a wireless printer to use as well - I have to be aware of?

  I'm starting a blog with limited capital. Thank you to everyone who contributes to the cybercomputability of us all.

  Hello and welcome to the HP support community!

  Ask us the question, "what should I buy?" is difficult to answer.  We do not know your needs or preferences (others you have "limited Fund").  There are hundreds of printers with wireless capabilities.  Still, we don't know what you're wanting - ink jet, laser, color, photo printing capacity jet, absolute who is cheapest available?  Print you hundreds of documents per month, or two or three?

  You ask strictly for HP products which are compatible with the Tablet?  All/all products from other manufacturers?

  If you are expected to produce a list of all the possible volumes that work, it won't happen...

  In theory, any BlueTooth keyboard or mouse designed to work with a Windows PC should work.  HP made several.

  Most wireless printers use a wifi network.  It will help if you have one at home - an HP ePrint printer can print a file from anywhere in the world if connect you to a network home.  No network?  There are other printers that can print directly using wifi.

  Think about your needs first, and then balance the costs involved.   It would be useful you ask on the printers in the printer of the Forum sections.

  WyreNut

• How to connect a keyboard to a 8-1401 HP Tablet?

  I wonder how I could connect a keyboard to my HP 1401 8 tablet.

  I bought a wireless (bluetooth) (mark Anker) keyboard, but then I realized that I obviously do not have compatible Bluetooth on the tablet. Is it possible to use a bluetooth dongle adapter (if so, which?) to my Tablet compatible bluetooth, so that it works with the keyboard, I've already bought? Or is there a workaround using WIFI to connect the wireless keyboard? (If so, how?)

  If not, what do I need connect a wired keyboard? I think a USB OTG cable that fits the micro-USB port to a classical USB port? And any particular type of keyboard should I consider for my HP 1401 8 Tablet?

  Thank you!

  (The love of my printer HP Officejet Pro, but I'm not finding HP technical support for tablets very... existing.) Tried three times for 'cat', and every time I have waited more than 15 minutes AFTER the display shows that I got an estimate '1 minute' to wait for a technician. What is happening with this? Is this typical or did I hit it on a bad day?)

  Hello and welcome to the HP support community!

  There is a message at the top of this section on the ability of the OTG.  HP 8 1401 is listed as able to withstand a keyboard via OTG, but a BlueTooth dongle is questionable...

  OTG Support Post.

  HP support for OTG was very hit & miss throughout their whole Tablet line, with more accuracy than hits.  If I were in your situation, I would seriously consider acquiring a tablet which had integrated BlueTooth if you want to use a BlueTooth keyboard!

  Adding a keyboard of version OTG would work - maybe you can return the keyboard Anker.

  (I type this reply with a slate of 10 HD & a former Palm BlueTooth Folding Keyboard keyboard!)

  WyreNut

• Help. Are there parental controls for 1800 7 hp Tablet?

  I bought this tablet for my 7 year old son. And I can't find the parental control. If there is someone who found them please help me. My child was already able to download some applications THAT ARE NOT RECOMMENDED for CHILDREN. Help!

  Discussions were merged into one.

  Open game store.  Access by typing on three points in the upper right settings.  To halfway to the bottom is the filtering of content, where you can also set a password to limit purchases.

  Hope that helps.

• Why am I having such a problem get my files installed Tablet & records to reappear under Windows? They are gone!

  I was able to connect my first ereader (Kindle Touch) via the USB port and the page file right here, I was able to install it, the icon of "New Hardware Detection" & notification jumped right up-no problems with it NEVER. It is actually used to get under the option mass storage device my computer. The disc or the drive, which it never is, was not (c) or (d) or even (f) is sometimes come; He was always identified as the Kindle (E :). Once I had a newer version, the Kindle Fire (compressed), it is not yet recognized as "New hardware", after the first time, I have finally been able to track it down in the device manager & used the file of internal parameters of the device (for transferring files), it is more exsists on the device manager no matter where - and there is NO files/folders/programs that opens when you click above and none with the name Kindle! I can't work and even re-install the device, after that go to add/remove hardware-it again (via the Setup Wizard & Wizard adding new hardware) the device is installed. Help, please!

  Sincerely frustrated. Elisha

  Hi lilbitz,

  If I understand correctly, you are facing problem with Tablet installed reappering files and folders in Windows. Do not worry, I'm here to help you with this question.

  I would like to know if you have tried other USB ports?

  See the section "Connection Via USB" in the document according to Amazon and check if it works for you.

  http://www.Amazon.com/GP/help/customer/display.html/ref=hp_navbox_k2troubleusb_200375470?nodeID=200375470#USB

  Please answer if the steps did not help, so that we could help you better.

• Control Panel - give me my labtop-"Tablet PC settings" is that at the time? What are the parameters?

  Control Panel - give me my labtop-"Tablet PC settings" is that at the time? What are the parameters? Common sense is the garment of the genius work.

  Hello

  Yes some of the Tablet Settings 'could be useful on some laptops to some users." Easier to understand
  This is for all users of Vista to make a special version for users of the tablet.

  If not using a Tablet you can simply ignore them.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• A Laserjet 5000 are accessible by a samsung Tablet 10.1 tab2 using an e-print application"?

  I have a printer laserjet A3 5000 that still works well after years of use.

  It is connected to a desktop computer and a laptop win7 computer.

  It is accessible by other laptops wireless by enabling the functionality of sharing-all of the printer and in "giving the"

  portable external IP address of the printer. (Awkward sentence means I can connect wireless to the printer)

  Y at - it an app that would allow me to print from my tablet from samsung GT-P5100 at the range of printers laserjet 5000?

  If so, please advise details and how-to-operating instructions.

  If not, why, since the tablet will have access to all my files connected to the hub etc.

  best regards and thank you

  Tony

  Hey toneow,

  HP has made a Web page with a list of printers that are compatible with the HP ePrint App.  I'll give you a link to this page below:

  http://support.HP.com/us-en/document/c02814760

  We can see that the HP Laserjet 5000 is not listed under the LaserJet of commercial class, from that moment.