size of the dump file

Similar Questions

• Estimate of the size of the dump file with the export query parameter

  Hi all
  
  I would like to ask questions about EXPORT utiliy. Can I estimate the size of the dump for export with the parameter file "application"? You can find my syntax exp on below?
  
  exp scwq/sCwq201 parfile = scw.par
  
  contents of the scw.par file.
  
  FILE ='/ u01/EXPDUMP/SCW. DMP ".
  TABLES IS MIMO. WFTRA
  JOURNAL ='/ u01/EXPDUMP/SCW. JOURNAL"
  CONSTRAINTS = NO.
  STATISTICS = NONE
  QUERY = "WHERE (Eurie > 8132560 AND IN (SELECT FROM mimo.objectcfg WHERE oname sobject = 'TICKET')) OR (Eurie > 188872 AND IN (SELECT FROM mimo.objectcfg WHERE objectname sobject = 'WORDER')) '"
  
  In fact, I know that without query to export file parameter. But I could not find a solution to my question...
  
  
  B.R

  Hello
  From what I've seen when you do 'query =' is not taken into account at all when estimating the size of the dumpfile no matter if you use blocks or statistics methods. All I can suggest you do is get the estimated size and then work manually on what percentage of lines you will be back and then just do a simple calculation.

  Kind regards
  Harry

  http://dbaharrison.blogspot.com

• Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

  Hello

  I use TEMPRO, and he suggested to update my BIOS.
  I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

  This means I m doing wrong? or I have the latest BIOS in my system.

  Please advice.

  Thank you.

  Hello

  First of all I don't do everything what said Tempro!

  Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
  and this, for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

  The problem is that you have unzipped the Cabinet correctly!

  In any case, I think that it s not useless to put anything, if the laptop runs without problem!

• Update the BIOS of the A110 to satellites--> the size of the ROM file is incorrect

  I tried upgraing BIOS download from Toshiba site but error message.
  The size of the ROM file is incorrect - suggestions for moving forward.

  Hello

  Today, it seems it's your lucky day...
  Have looked into the Toshiba, basic knowledge about the Toshiba support home page and found this FAQ document:

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It should help you

• Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

  P10 - 304 - downloaded Update Bios, but when I went to run it I get the message "the size of the.
  ROM file is incorrect. What can I do now?

  One question; Why you want to upgrade the BIOS?

  I studied on the knowledge base of the Toshiba site and found this:
  I always get an error message: the size of the ROM file is incorrect.
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It will be useful.

• Tecra A6 - update BIOS - "the size of the ROM file is incorrect.

  Hi, I was sent this link to download a new BIOS
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=60307&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8

  But when I try to use set up, I get an error message that says: "the size of the ROM file is incorrect" and it doesn't let me move forward. How can I, please?

  Paul

  Hello

  Maybe this article can help you http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm

  Good bye

• Error: Size of the ROM file is incorrect, as the update of BIOS on satellite A200

  Dear Sirs,

  I tried to update my bios on satellite A200 and then I start the update it says "the size of the ROM file is incorrect.

  Can someone help me with this?

  What should I do?

  Hi Stavros

  I think I can help you.
  I remember this error message. Some of the users of the forum have posted a solution.

  For example here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=112057𛖹

  It seems that it s not a serious error is displayed because the BIOS file was not properly extracted.

  Good bye

• How to reduce the size of the PDF file on scanned on my PMX922 docs

  I deal with a lot of documents, and I find that when I scan the docs on my MX922 the size of the PDF file is MUCH larger that the size of the original PDF file. That's what I see (on a document page 2):

  (Received) original size: 11 k

  Default scan (Quick Menu): 1061 k

  With compression high (Quick Menu): 116 k

  The Panel of the printer (res 150): 209 k

  Windows scanning app (150 res): 1495 k

  Scanning from the Quick Menu with high Compression seems to be the best, but it still somewhat adds to the file size. It's a big problem so I dal with many GREAT docs. Several times the size of the file increase prevents me from being able to send files. Is there anything else I can do? Does anyone have any suggestions?

  Hi 1wwjdbro,

  We can set the PDF to HIGH compression option in the utility of digitization of IJ and also select the image digitized transfer compression to reduce the file size of the PDF file. To do this, please follow these steps:

  1. open the utility of scanning IJ.

  2. in the Scan from Canon IJ utility window that opens, click SETTINGS... at the bottom right of the window. The settings dialog box is displayed.

  3. click on the SCAN of DOCUMENT option in the left pane of the window.

  4 in the right pane window, look for the box to COMPRESS SCANNED IMAGES to be TRANSFERRED in the Scan Options section and check it.

  5. then, in the SAVE the SETTINGS section, find the FORMAT of DATA field and ensure that PDF or PDF (multi-page) is selected, and then click the SETTINGS button to the right of the field.

  6. in the window that opens, find the COMPRESSION PDF section, then select TOP from the drop-down list. Click OK to close the window. You will be taken back to the SETTINGS window.

  7. once all settings have been selected in the SETUP window, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen is displayed.

  8. click the DOCUMENT button. Housing starts scanning. Click CANCEL to cancel the scan if necessary. The scanned images are saved to the location of the selected folder previously specified in the SETTINGS... window.

  I hope this helps!

  If you need more assistance, please call 1-866-261-9362, Monday - Friday 10:00 - 10 pm et (excluding holidays) and a technical support representative Cannon will be happy to help you.  There is no charge for this call.

• Facing a problem with the system, please analyze the dump files and indicate us the action.

  So, like many others, I was punished by Bill Gates and co.. With a BSOD.

  Just need help analyzing dump files to determine which driver I should change, updated or what not.

  The dump files are located in...

  https://onedrive.live.com/redir?RESID=3D2BA1E313ACF8DA! 2592 & authkey =! AH4PFrNFacnAfvw & ithint = the file % 2crar

  BTW, still stuck in windows 7 hehe

  Thank you

  Had to go to the dentist - ZigZag3143 is reliable using BSOD.

  Your Atheros is an AR5007G Wireless Network Adapter.

  Visit this link:

  https://www.Atheros-drivers.com/

  Find AR5007G, click:

  

  Scroll down until you find AR5007G for Windows 7 64 bit and you want to:

  

• Some programs run very slowly, and when I get the dump file on these I get the following errors

  Some programs are running very slow on Windows 7, 64-bit, 12 GB of RAM.

  I opened the Task Manager, right-click on the program and generated a dump file.

  The dump file contains the following:

  Debug version of Microsoft Windows (R) 6.3.9600.17237
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\SOMEUSER\AppData\Local\Temp\javaw (3). DMP]
  User Mini with full memory dump file: only application data is available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows 7 Version 7601 (Service Pack 1) MP (6 procs) free x 64
  Product: WinNt, suite: SingleUserTS personal
  Computer name:
  The debugging session: Wed Sep 17 19:40:25.000 2014 (UTC - 07:00)
  System Uptime: 7 days 6:20:59.258
  Running time: 0 days 0:01:03.000
  ...................................................... WARNING: dnsapi overlaps dhcpcsvc6
  WARNING: dnsapi overlaps mdnsNSP
  . WARNING: winrnr overlaps NapiNSP
  .........
  .... WARNING: webio overlaps winhttp
  ......... WARNING: WindowsCodecs overlaps dwmapi
  . WARNING: apphelp overlaps dhcpcsvc
  ..........
  ERROR: The symbol file is not found.  Defaulted to export symbols ntdll.dll.

  Summary of the symbol load error *.
  Name of the module error
  ntdll the system cannot find the specified file

  You can solve most symbol related issues by turning the symbol loading diagnostics (! sym noisy) and repeating the command that caused the symbols to load.
  You should also check that your symbol search path (.sympath) is correct.
  ERROR: The symbol file is not found.  Defaulted to export symbols for wow64cpu.dll.
  wow64cpu! TurboDispatchJumpAddressEnd + 0x6c0:
  75162e09 c3 00000000' ret

  Could I get comments on what to do?

  I already run SFC, disc scanned with difficulty of order and downloaded a few quick fixes on this site without success.

  Thank you

  Veronica

  Hi Veronica,.

  Thanks for the reply.  Refer to the following link suggestions.

  To optimize Windows for better performance

  http://Windows.Microsoft.com/en-CA/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  If you have another user account, please identify it and check the functionality. If you don't have a different user account, we will create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Try these steps and let us know the results.

• size of the image file

  Hi all

  I have an application that includes the photo module. I use under encoding settings:

  String encoding = "encoding = jpeg & width = 1024 & height = 768 & quality = normal;

  The problem is the image size. For the same scene when I use 9780 it is approximately 350KB for 9800, it is only 80KB. Can someone please explain the reason for this difference?

  Y at - it no additional or other adjustment means that I can use to reduce the size of the file for 9780? (physical size 1024 * 768 should not be changed).

  Thank you.

  Could not find any additional setting. I used the method to reduce the image quality and therefore the size of the image file without changing the resolution of the image below.

  JPEGEncodedImage.encode (bitmap, QUALITY);

• Pre set the size of the final file

  I'll try to find a method that allows me to pre-define the size of the final file to for example 1.8 MB. The idea is that I can set the size of parameter file (e.g.1.8MB) and lets say a resolution of 72 dpi for example. I run the command and Photoshop reasambles image to pixel dimensions necessary until I find myself with a file exactly 1.8 MB with a resolution of 72 dpi.

  The reason why? I need to convert 3500 images that are exactly 1.8 MB. The pixel dimension are not relevant in this case

  N ° not in PS. It doesn't ever work under very specific conditions, in any case. You would need to settle on a format that uses no compression or a compression method that is predictable and compress the same amount regardless of the content of the image and the program must have a way to enforce a file of cropping and scaling automatically size to reduce the number of pixels. Sort of a safe for the Web on steroids, but using uncompressed TIFF or something else. It may even be necessary to run the algorithm of coding in reverse and in a loop of trial and error and even then, the question is, how exactly the size of the file must match. Apart from some obscure programming demos which produce images specifically companies or generate specific buffers for testing purposes, I have seen nowhere implementation practice.

  Mylenium

• Logitech C920 sequences is more than double the size of the original file

  Hi all

  I'm very new to adobe Premier Pro and I am just a little overwhelmed by the software. Here is my configuration of curect.

  Webcam: Logitech C920

  MIC: Blue Yeti

  I record video using OBS and it generates a file in the MP4 format. About a 10-minute film is at most 200 MB. Now, when I go to edit the clip in Premier Pro I understand that I must first begin a new sequence. This is my first problem: there is no predefined sequence that matches the C920 Locitech. So for now I'm just drag and drop the file into the time line. Is this correct?

  I can do the basic changes for now and that's fine, the problem comes when I go to export the images. I used H.264/Custom upstairs (MP4 format), I leave everything as it was. only 2 things I edit are the maximum and minimum flow for 10/16. I also check the box use overview at the bottom (I think that's what it was called) now when I hit Caryl export my PC Suite for about 10/15 minutes and give me a file that is about 700 MB in size. This is more than double the size of the original file. Why is this?

  If there is more information you need, I'll do my best to advise.

  Thank you

  If the C920 clip is the first clip you fall into an empty timeline, first expected to ask if you want to change sequence settings to match the clip (unless it is already). To be sure, simply right click on the clip in the project bin and select new sequence of the Clip and they will match for sure.

  The size of the exported video file is dictated by one thingand it is not frame size or frame rate - sampling rate is what determines the size of the file. If you want to halve the size of output file, you will need to reduce the flow rate by half.

  Rather than using Custom, maybe find a predefined existing H.264 which you gives the combination of quality and size of the file that you like? Make sure that the size of the image and the frame rate matches the source. How do you want to display or distribute material - on computer, on a device, online?

  I do not use the option use the previews - that means you take a temp make file and redisplay (transcoding) there again, adding a new generation of compression loss. By not checking this box, first visit the direct export from the source element format, by cutting out the middle man. I do not have a clip that is so effects loaded it will not play in the timeline panel to check the results, I don't bother making anything green. Everything is done at time of export anyway.

  Red, yellow and green make bars and what they mean. First work Pro area

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Purge of the records of the Table and the size of the data file

  11.2.0.4/Oracle Linux 6.4

  We want to reduce the size of the DB (file size of data), so that our RMAN backup size will be reduced. So, let's create stored procedures that will purge old data in huge tables.

  After you remove records, we will decrease the tables using the:

  change the movement line of table ITEM_MASTER enable;

  change the waterfall table retractable ITEM_MASTER space;

  ALTER table ITEM_MASTER deallocate unused;

  The commands above will reduce the file size of data (see dba_Data_files.bytes) or it will reduce the size of the segment?

  Only the segment formats will be reduced.  Oracle has never reduced the sizes of data file automatically.  You would have to reduce them.  You may not be able to reduce the size of data file if there are extensions to the 'end' (highwatermark) data files.  In this case, you will need to create a new tablespace and move all the objects for the new tablespace OR export, drop, create tablespace and import.

  Hemant K Collette

• How can I control the size of the BMP file created by freeze frame tool?

  I use the first 13 items on Windows 7

  When I run the tool freeze frame it creates a still image (bmp file) from an image in my video clip.

  The bmp file size can vary from 6076 KB, 2701 KB or KB 1013 and seems to be independent of the type of item (MPEG, MOV, AVI), size (1366 x 768, 1280 x 720, 1920 x 1080, 320 x 180, 720 x 480) or rate (29.97, 29,55. (29.04 25.00, 24.00) video.

  The size of the image seems to depend on the project folder, in which it was created.  The same clip can produce a 6076 bmp or bmp file 2701 whereby one project (prel) the tool Freeze Frame files was performed.

  
  

  I searched everywhere for a project setting that could establish a size by default files for output, but it seems not to be.

  
  

  Is it possible to control the size of the bmp file generated by freeze frame?   I need consistency,

  
  

  Thank you.
  

  David_F wrote:

  ..... For example, text on a 2701 KB file annotations appear more important than those on the 6071 KB file when clips of two different subprojects are combined in the master.

  .. .dimensions of image file 6076 KB (20 x 11/5 inches)

  Re thinking, try a few things and this sentence convinces me that you mix dimensions of the image in pixels and the size of the file in KB.   In addition, digital images have in. up to put on paper or screen.  All they have is the pixel dimensions.  Each pixel can have a lot or little information based on the color, brightness, etc. so the KB of size can vary even if the pixel dimensions only.

  I've set up a project in 640 x 480, put in a clip and freeze box a. BMP.  If you look at a file in Explorer and you pass the mouse over it, you get a date, size in pixels and size KB.  The result (you can see in the picture as an attachment) is the file with an image of 640 x 480, as the setting for the project.  In this case, a 900KO file size was necessary to store the data of this particular framework.

  If Visio is happy with JPEG files, there is a way through the publication & share > Image to better control the dimensions in pixels with settings under the Advanced button.  Using this method, I made a jpeg from the same exact with 1920 x 1080 pixel frame and 1,2 MB in file size.

  I am convinced that your changes in the size of the text are due to dimensions in pixels and have nothing to do with the size of the file.  Of course I was wrong more than once and tips can be useful what you actually pay!