802 1 q tagging with PIX 6.3 (1)
Someone uses VLAN tagging with PIX 6.3 (1)? I could make an ethernet (eth0, for example) as port trunking to carry vlan2, vlan3/vlan4. But the PIX does not define ethernet as an access port 1 belongs to the vlan 2. Or if I try to assign ethernet3 belongs to vlan3, it would be rejected by the PIX also.
I thought that the concept of PIX to award port trunking and a VLAN access port must be the same happening with catalyst, but it looks like I'm wrong. Anyone can point the right direction?
Best regards
Engel
Engel: Configure the VLAN on the PIX is not the same what to do on the switch. The PIX interfaces are not configured as 'trunk' or 'access' ports ports. With the PIX, you can assign a vlan is a physical interface - or assign a vlan as a logical on a physical interface interface. And vlan is limited to a single PIX - physical or logical interface, here's an example configuration:
interface ethernet1 100full
physical interface ethernet1 vlan50
logical interface ethernet1 vlan60
logical interface ethernet1 vlan70
logical interface ethernet1 vlan90
interface ethernet2 100full
physical interface ethernet2 vlan20
interface vlan1 ethernet2 logical
logical ethernet2 vlan30 interface
logical interface ethernet2 vlan40
!
nameif ethernet1 Win2K security52
nameif ethernet2 NT4 security90
nameif vlan60 User60 security53
nameif vlan70 utilisateur70 security54
nameif vlan90 User90 security55
nameif vlan1 management security91
nameif vlan30 Novell security50
nameif vlan40 various security51
!
address IP Win2K 10.2.50.1 255.255.255.0
address IP NT4 10.2.20.1 255.255.255.0
address IP User60 10.2.60.1 255.255.255.0
IP utilisateur70 10.2.70.1 255.255.255.0
address IP User90 10.1.90.1 255.255.255.0
10.2.1.1 management IP address 255.255.255.0
address IP Novell 10.2.30.1 255.255.255.0
address IP Misc 10.2.40.1 255.255.255.0
I hope this helps!
Tags: Cisco Security
Similar Questions
-
802. 1 x with assignment of VLANs
Hello
I'm trying to Setup 802. 1 x with assignment of VLANS. I have been successfully obtained the authentication works, but assigning VLAN is not applied. I tried this on a CE500, and WS2950-12 once encountering the same problem.
If I "debug dot1x all the" I get a few messages "dot1x-ev: received VLAN Id - 1", if I'm capturing packets on my radius server, I see that the correct attribute pairs are extinguished. "." Nothing in the notes say that 802. 1 x with dynamic VLAN will not work.
Attribute value pairs
AVP: l = t = Framed-Protocol (7) 6: PPP (1)
AVP: l = t = Service-Type (6) 6: Framed-User (2)
AVP: l = t = Tunnel-Medium-Type (65) 6: Unknown (16777222)
AVP: l = 5 t = Tunnel-Private-Group-Id (81) Tag = 0 x 01:20
AVP: l = t = Tunnel-Type (64) 6: Unknown (16777229)
AVP: l = 6 t = EAP - Message (79) last Segment [1]
AVP: l = 46 t = Class (25): 53F9068C00000137000102000A011E630000000000000000...
AVP: l = 14 t = Vendor-Specific (26) v = Microsoft (311)
AVP: l = 51 t = Vendor-Specific (26) v = Microsoft (311)
AVP: l = 58 t = Vendor-Specific (26) v = Microsoft (311)
AVP: l = 58 t = Vendor-Specific (26) v = Microsoft (311)
AVP: l = 18 t = Message-Authenticator (80): 33B53112C51B15C40BFBDCE687F4C9C4
Please check if all 3 of these attributes are set correctly on the Radius Server:
AVP: l = t = Tunnel-Medium-Type (65) 6: Unknown (16777222)
AVP: l = 5 t = Tunnel-Private-Group-Id (81) Tag = 0 x 01:20
AVP: l = t = Tunnel-Type (64) 6: Unknown (16777229)
It seems that only the Tunnel-private-Group-Id is defined, not the other two.
CFR. http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
-
but my tag with a key number has been deleted
I have a Compaq presario CQ61 laptop but my hard disk is damaged, I bought a new one, try to install vista but my tag with a key number has been cleared. How can I RECOVER my key for vista
Contact HP/Compaq and order a set of recovery disc for your computer - you can then install with those who, as they should not ask for a key. No one wants a register key your computer came with, except you.
-
Problem pairing and using Bluetooth THE TI sensor Tag with Z10
I can't pair and use THE TI Bluetooth sensor Tag with my Z10 on OS version 10.1.0.273.
I can find out the sensor with bt_disc_retrieve_devices Tag, but when I try to pair with bt_rdev_pair, I get an "Operation not permitted" error (EPERM). If I skip the step of pairing and just the list of services with a bt_rdev_get_services, I get an error "No such file or directory" (ENOENT). Same thing happens in the settings menu bluetooth where I can see the device, but it fails to the pair.
And then, when I try to connect directly to a service with bt_gatt_connect_service, I get an error 'No such device' (ENODEV), which leads me to believe that I have to be paired first to connect to a service.
The sensor Tag I pairs and connects very well with an iPhone 4S and on the flipside, my pairs fine Z10 with other devices THE bluetooth so I don't know which side prevents matching. I was actually at the session of JAM62 to BB Live 2013 and devices we were seemed to pair well with the TI sensor tag. Not sure if the version of the OS has nothing to do with it.
Anyone else having these issues with the TI sensor Tag matching or know of ways to solve this?
Updated the Tag TI with TI WHEAT SDK 1.3.2 sensor and now it matches successfully. Thank you!
-
Authentication of 802. 1 X with the assignment problem VLAN.
Hello
I intend to implement the authentication of 802. 1 X with assignment of VLANS on our network and assign different VLAN on the switch (Cat2960) of access according to the terminals (for example, VLAN10 for VLAN40 for PC, VLA30 for STB IPTV, VLAN20 for voice, WLAN) after a successful authentication.
Is the topology of the network (backbone L3 Switch: Cat6K) <----->(L2 access switch: Cat2960) <-------->(L2 access switch: Cat2960) <-->WLAN, voice, IPTV, PC. (Please refer to the file for the detailed topology rasthaus)
I have to respect (switch L2) <-->(switch L2) topology due to wiring problem.
My question is below.
1. to take account of different VLAN of terminals, the only way is in trunk on both L2 switches port. is this possible?
As far as I know, cannot enable 802. 1 X on a trunk port. is it good?
2. If this is true, is there a solution?
Thank you for your help. :-)
You will not run 802. 1 x on the junction between switch ports, but rather on the ports that connect devices to end-users.
-->-->-------->-----> -
How to activate 802. 1 x with ' Wake on LAN ' EMS 2010 cisco?
Hello
We have acquired an EMS cisco 2010 to replace our distribution switch. I've implemented the 802.1 X network. Everything works great except that I can't find how to activate 802. 1 x with "Wake on LAN" on this kind of switch. You have an idea?
The catalyst, I saw that it was sufficient to activate this control "control-direction authentication {times |}". in}.
Except that it seems not to exist on this switch. Is there another way to activate 802. 1 x WoL without the help of this command?
Or how to allow the magic packet (WoL) on a port marked by unauthorized 802.1 x?
Thanks in advance
Hervé
Hi John, it is not supported.
-Tom
-
is compatible with PIX SSM - 4GE manufacturer?
proposed replacement of PIX - 1FE is SSM - 4GE. This means that it is compatible with PIX?
No it's not. The PIX now being EoS, assume you have / will upgrad to the ASA.
HTH
-
802. 1 x with the ACS and Windows AD
Hello
Im trying to configure 802. 1 x with ACS 5.2 but I am wrong as his very differnet ACS 4.2.
I installed the ACS for the field and think that I installed the external Idnetity store, however when I try to authenticate a pc using probable authentication "PEAP (EAP-MSCHAPv2), I get a reason for failure 22056 object was not found in the store there is identity.
Marco
Hi Marco,.
I guess you missed a mapping configuration in the Section of access policy.
Create an Access Service name AS-802. 1 x select user select the Service Type, and select network access. Select the identity of political Structure and authorization. Select PEAP as the authorized Protocol. Click on finish
You will see the new service click on identity.
Select the source of the identity you have created, then save.
Click permission
Select an access permission by default authorization rule and save.
Create a Service access rule name 802. 1 x
Select the Protocol Radius as a Condition and as a compound Condition select RADIUS - IETF:Service - Type match box, then select the service that you created before.
then you can try again.
concerning
Alex
-
802. 1 x with the login script
Hello
Before you set the 802. 1 x with ISE. Logon user with a script to map the network drive.
We deployed the 802. 1 x with ip phone and your PC successfully, but the logon script does not work now.
Whatever measures are necessary to make the login script work?
ISE:2.1
switch: 3750 with 12.2 (55) SE10
PC:Win7 (to connect to the ip phone)
IP phone: 6921 (connect to switch f 1/0/4)
Switch configuration is to see more:
!
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
no password encryption service
Service linenumber
sequence numbers service
!
hostname ISESW01
!
boot-start-marker
boot-end-marker
!
enable password 7 xxxxxxxxxxxxxxxxxxxxxx
!
username password 7 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx
!
!
AAA new-model
!
!
RADIUS AAA server group ISE
auth-port 1645 10.202.152.91 Server acct-port 1646
auth-port 1645 10.202.152.92 Server acct-port 1646
!
default AAA dot1x ISE authentication group
AAA authorization network default group ISE
AAA authorization auth-proxy default group ISE
accounting AAA periodic update 5
accounting dot1x default start-stop group AAA ISE
AAA accounting system by default start-stop group ISE
!
!
AAA server RADIUS Dynamics-author
customer 10.202.152.91
customer 10.202.152.92
!
AAA - the id of the joint session
switch 1 supply ws-c3750v2-48ps
mtu 1500 routing system
VTP transparent mode
DHCP excluded-address IP 10.202.21.1 10.202.21.10
DHCP excluded-address IP 10.202.121.196
!
IP dhcp pool testingdhcp
Network 10.202.19.0 255.255.255.0
router by default - 10.202.19.1
10.202.152.21 DNS server
!
!
analysis of IP device
!
MLS qos map policed dscp 0 10 18 24 46-8
MLS qos map cos-dscp 0 8 16 24 32 46 48 56
MLS qos srr-queue input bandwidth 70 30
MLS 1 80 90 qos srr-queue input threshold
priority-queue input bandwidth 2 30 MLS qos srr-queue
queue threshold 1 MLS qos srr-queue input cos-map 2 3
queue threshold 1 MLS qos srr-queue input cos-map 3 6 7
queue threshold 2 MLS qos srr-queue input cos-map 1 4
queue threshold 1 MLS qos srr-queue input dscp-map 2 24
queue threshold 1 MLS qos srr-queue input dscp-map 3 48 49 50 51 52 53 54 55
queue threshold 1 MLS qos srr-queue input dscp-map 3 56 57 58 59 60 61 62 63
queue threshold 2 MLS qos srr-queue input dscp-map 3 32 33 40 41 42 43 44 45
-More - mls qos srr-queue input dscp-map 2 3 46 47 threshold queue
queue threshold cos 1-map of MLS qos srr-queue output 3 4 5
queue threshold cos 2-map of MLS qos srr-queue output 1 2
queue threshold 2 cos-MLS qos srr-queue output 2 3 card
queue threshold cos 2-map of MLS qos srr-queue output 3 6 7
queue threshold cos 3-map of MLS qos srr-queue output 3 0
queue threshold 4 cos-MLS qos srr-queue output 3 1 card
queue threshold 1 dscp-map of MLS qos srr-queue output 3 32 33 40 41 42 43 44 45
queue threshold 1 dscp-map of MLS qos srr-queue output 3 46 47
queue threshold 2 dscp-map of MLS qos srr-queue output 1 16 17 18 19 20 21 22 23
queue threshold 2 dscp-map of MLS qos srr-queue output 1 26 27 28 29 30 31 34 35
queue threshold 2 dscp-map of MLS qos srr-queue output 1 36 37 38 39
queue threshold 2 dscp-map of MLS qos srr-queue output 2 24
queue threshold 2 dscp-map of MLS qos srr-queue output 3 48 49 50 51 52 53 54 55
queue threshold 2 dscp-map of MLS qos srr-queue output 3 56 57 58 59 60 61 62 63
queue threshold 3 dscp-map of MLS qos srr-queue output 3 0 1 2 3 4 5 6 7
queue threshold 4 dscp-map of MLS qos srr-queue output 1 8 9 11 13 15
queue threshold 4 dscp-map of MLS qos srr-queue output 2 10 12 14
MLS qos all the output queue 1 1 100 100 50 200 threshold
MLS qos queue of output 1 all threshold 2 125 125 100 400
MLS qos queue of output 1 all threshold 3 100 100 100 400
MLS qos queue of output 1 all 4 60 150 50 200 threshold
MLS qos all the output queue 1 15 25 40 20 buffers
MLS qos
!
Crypto pki trustpoint TP-self-signed-1210376576
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1210376576
revocation checking no
rsakeypair TP-self-signed-1210376576
!
!
TP-self-signed-1210376576 crypto pki certificate chain
certificate self-signed 01
xxxxxxxxx
quit smoking
Auto qos srnd4
control-dot1x system-auth
dot1x critical eapol
!
!
!
!
pvst spanning-tree mode
spanning tree extend id-system
VLAN spanning tree priority 819 61440
!
internal allocation policy of VLAN ascendant
!
VLAN 121
name Voice_Vlan
!
VLAN 819
name 19F_VLAN
!
VLAN 888 899
!
!
class-map correspondence AUTOQOS_VOIP_DATA_CLASS
match ip dscp ef
class-map correspondence AUTOQOS_DEFAULT_CLASS
match the name of access by DEFAULT ACL-AUTOQOS group
class-map correspondence AUTOQOS_VOIP_SIGNAL_CLASS
match ip dscp cs3
class-map correspondence AutoQoS-VoIP-RTP-Trust
match ip dscp ef
class-map correspondence AutoQoS-VoIP-control-Trust
match ip dscp cs3 af31
!
!
Policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
class AUTOQOS_VOIP_DATA_CLASS
DSCP ef Set
128000 8000 exceed-action of the police controlled-dscp-transmit
class AUTOQOS_VOIP_SIGNAL_CLASS
DSCP Set cs3
32000 8000 exceed-action of the police controlled-dscp-transmit
class AUTOQOS_DEFAULT_CLASS
Set default dscp
10000000 8000 exceed-action of the police controlled-dscp-transmit
Policy-map AutoQoS-Police-CiscoPhone
class AutoQoS-VoIP-RTP-Trust
DSCP ef Set
320000 8000 exceed-action of the police controlled-dscp-transmit
class AutoQoS-VoIP-control-Trust
DSCP Set cs3
32000 8000 exceed-action of the police controlled-dscp-transmit
!
!
!
!interface FastEthernet1/0/4
switchport access vlan 819
switchport mode access
switchport voice vlan 121
authentication event fail following action method
action of death event authentication server allow voice
no response from the authentication event action allow vlan 889
living action of the server reset the authentication event
multi-domain of host-mode authentication
authentication order dot1x mab
authentication priority dot1x
Auto control of the port of authentication
MAB
added mac-SNMP trap notification change
deleted mac-SNMP trap notification change
dot1x EAP authenticator
dot1x tx-time 10
spanning tree portfast
!!
interface Vlan1
no ip address
!
interface Vlan819
IP 10.202.19.11 255.255.255.0
!
default IP gateway - 10.202.19.1
IP classless
IP http server
IP http secure server
!
!
IP access-list extended by DEFAULT ACL-AUTOQOS
allow an ip
IP access-list extended redirection
deny udp any eq bootpc any eq bootps
deny udp any any eq bootps
deny udp any any eq field
deny ip any host 10.202.154.192
allow an ip
!
!
SNMP - server RO Cisco123 community
RADIUS attribute 6 sur-pour-login-auth server
Server RADIUS attribute 8 include-in-access-req
RADIUS attribute 25-application access server include
dead-criteria 30 tent 3 times RADIUS server
RADIUS-server host 10.202.152.91 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxxx
RADIUS-server host 10.202.152.92 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxx
RADIUS vsa server send accounting
RADIUS vsa server send authenticationI had a similar problem the workstations where the value "of the computer or user authentication" in the PEAP protocol settings. What is happening is that list DACL that served as of when the computer account has been authenticated restricted just DCs etc, but don't understand the locations required for the login script. It seems that Windows 7 user logon script runs before the dot1x presents the user credentials to the switch.
Thus, in our case, we have modified the DACL is in place for the computer account to allow access to the locations required for the login script (i.e. the network sharing servers), and everything works.
-
How to manage the Tags with PowerCli
Hello
I'm trying to find examples how to manage Customs 'Tags' in vSphere 5.1. This new feature is only used in the web client.
I would like to create, delete, and associate tags with PowerCli objects.
Is someone can tell me the basic commands?
Thank you.
Karl
Currently, there are no PowerCLI cmdlets to manage the tags.
But take a look at Create/Set TAGs via PowerCLI
-
How the elements tag with two tags?
With the following function I can tag with bold and italic tags xml elements. The problem is, I also need '< b > < i >' for example. Now my question is, how is that possible?
function tagStyles (myXmlElement) {}
app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;
app.findChangeTextOptions.caseSensitive = false;
app.findChangeTextOptions.includeFootnotes = app.findChangeGrepOptions.includeFootnotes = false;
app.findChangeTextOptions.includeHiddenLayers = false;
app.findChangeTextOptions.includeLockedLayersForFind = false;
app.findChangeTextOptions.includeLockedStoriesForFind = false;
app.findChangeTextOptions.includeMasterPages = false;
app.findChangeTextOptions.wholeWord = false;
objectToTag = myXmlElement;
italic conversion
need to be developed for other styles
attention to the problems of nested xml tags
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences.findWhat = '. '. + » ;
app.findGrepPreferences.fontStyle = "italic";
var myFindTexts = myXmlElement.findGrep ();
If (myFindTexts.length > 0) {}
for (var j = 0; j < myFindTexts.length; j ++) {}
var myText = myFindTexts [j];
var myStartIndex = myText.characters [0] .index;
var = myText.characters [-1] .index myEndIndex;
objectToTag = objectToTag.xmlElements.add ({markupTag: "i", xmlContent:myText});})
myShift += 2;
}
}
conversion "BOLD"
need to be developed for other styles
attention to the problems of nested xml tags
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences.findWhat = '. '. + » ;
app.findGrepPreferences.fontStyle = "Bold";
var myFindTexts = myXmlElement.findGrep ();
If (myFindTexts.length > 0) {}
for (var j = 0; j < myFindTexts.length; j ++) {}
var myText = myFindTexts [j];
var myStartIndex = myText.characters [0] .index;
var = myText.characters [-1] .index myEndIndex;
objectToTag = objectToTag.xmlElements.add ({markupTag: "b", xmlContent:myText});})
}
}
bold italics conversion
need to be developed for other styles
attention to the problems of nested xml tags
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences.findWhat = '. '. + » ;
app.findGrepPreferences.fontStyle = "Bold Italic";
var myFindTexts = myXmlElement.findGrep ();
If (myFindTexts.length > 0) {}
for (var j = 0; j < myFindTexts.length; j ++) {}
var myText = myFindTexts [j];
var myStartIndex = myText.characters [0] .index;
var = myText.characters [-1] .index myEndIndex;
objectToTag = objectToTag.xmlElements.add ({markupTag: "b", xmlContent:myText});})
}
objectToTag = myXmlElement;
for (var j = 0; j < myFindTexts.length; j ++) {}
var myText = myFindTexts [j];
var myStartIndex = myText.characters [0] .index;
var = myText.characters [-1] .index myEndIndex;
objectToTag = objectToTag.xmlElements.add ({markupTag: "i", xmlContent:myText});})
}
}
}
When there is an element with the "Bold Italic" style it looks like this: 'my element with < b > < /b > < i > "BOLD" and the italic text < /i > '. There it looks like this: ' my element with < b > < i > bold and italic < /i > < / b > text.
Does anyone have an idea on this?
Thanks in advance!
Dear Stamm,
Try this...
objectToTag = objectToTag.xmlElements.add ({markupTag: "b", xmlContent:myText});})
App.Select (objectToTag.texts);
App.Selection [0] .associatedXMLElements [0].xmlElements.Add ("i", app.selection [0]);
Kind regards
Bala
-
Anyone use the <; cfdocument >; tag with a <; cfloop >;
Anyone use the < cfdocument > tag with a < cfloop >
I'm generating more documents like this.
< cfloop query = "myquery" >
< cfdocument type = pdf >
< html >... .HTML code here... < html >
< / cfdocument >
< / cfloop >
But only the first document is generated in the browser?
My requirement that I want to create multiple PDF and publish to folder and zip folder so that the user can able to download the ZIP file
Thanks in advance
My requirement that I want to create multiple PDF and publish to folder and zip folder so that the user can able to download the ZIP file
(1) create a folder named, say, docsDir, in the current directory.
(2) create PDF files, using suggestion of Eddie Lotter, name each file dynamically and store them in the folder docsDir.
Insert here the code to generate the content of
#filename # .(3) zip file, docsDir, store the resulting file, docsDir.zip, in the current directory.
-
Problem with PIX 501->; L2L 1721 VPN
I am setting up a site to site vpn according to the http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008051a69a.shtml.
I want to connect 192.168.105.0/24 and 192.168.106.0/24.
PIX01 is 192.168.106.1, with dynamic external IP (B.B.B.B)
RTR01 is 192.168.105.1, with dynamic external IP address (I'm just using DHCP current address of the ISP as A.A.A.A in the config of PIX01 - this is a temporary application, not critical where I can update the address if necessary)
It seems that the VPN tunnel is established but traffic does not return the router to the pix. I temporarily hosted all of the traffic on indoor/outdoor PIX interfaces (and icmp).
If I enable icmp debug I see ping requests from the client to 192.168.106.100 internal interface of the router (192.168.105.1), but no return icmp:
On PIX01:
180:-Interior ICMP echo request: 192.168.105.1 ID = 1 length = 40 seq = 298 192.168.106.100
181:-Interior ICMP echo request: 192.168.105.1 ID = 1 length = 40 seq = 299 192.168.106.100
182:-Interior ICMP echo request: 192.168.105.1 ID = 1 length = 40 seq = 300 192.168.106.100
183:-Interior ICMP echo request: 192.168.105.1 ID = 1 seq = length 301 = 40 192.168.106.100On RTR01:
* 03:40:46.885 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100
* 03:40:51.713 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100
* 03:40:56.713 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100
* 03:41:01.709 22 dec: ICMP: echo responded, 192.168.105.1 src, dst 192.168.106.100Output of running sh crypto isakmp his:
PIX01 (config) # sh crypto isakmp his
Total: 1
Embryonic: 0
Src DST in the meantime created State
A.A.A.A B.B.B.B 0 1 QM_IDLERTR01 #sh crypto isakmp his
status of DST CBC State conn-id slot
A.A.A.A B.B.B.B QM_IDLE 1 0 ACTIVEOut of HS crypto ipsec his:
PIX01 (config) # sh crypto ipsec his
Interface: outside
Crypto map tag: IPSEC, local addr. B.B.B.Blocal ident (addr, mask, prot, port): (192.168.106.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.105.0/255.255.255.0/0/0)
current_peer: A.A.A.A:500
LICENCE, flags is {origin_is_acl},
#pkts program: 103, #pkts encrypt: collection of #pkts 103, 103
#pkts decaps: 0, #pkts decrypt: 0, #pkts check 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0, #pkts decompress failed: 0
#send 12, #recv errors 0local crypto endpt. : B.B.B.B, remote Start crypto. : A.A.A.A
Path mtu 1500, overload ipsec 56, media, mtu 1500
current outbound SPI: 7cb75998SAS of the esp on arrival:
SPI: 0xb896f6c6 (3096901318)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
slot: 0, conn id: 1, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4608000/3151)
Size IV: 8 bytes
support for replay detection: Ythe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x7cb75998 (2092390808)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
slot: 0, conn id: 2, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4607999/3151)
Size IV: 8 bytes
support for replay detection: Youtgoing ah sas:
outgoing CFP sas:
RTR01 #sh crypto ipsec his
Interface: Vlan600
Crypto map tag: IPSEC, local addr A.A.A.Aprotégé of the vrf: (none)
local ident (addr, mask, prot, port): (192.168.105.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.106.0/255.255.255.0/0/0)
current_peer B.B.B.B port 500
LICENCE, flags is {}
program #pkts: 10, #pkts encrypt: 10, #pkts digest: 10
decaps #pkts: 10, #pkts decrypt: 10, #pkts check: 10
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : A.A.A.A, remote Start crypto. : B.B.B.B
Path mtu 1500, mtu 1500 ip, ip mtu BID Vlan600
current outbound SPI: 0xB896F6C6 (3096901318)SAS of the esp on arrival:
SPI: 0x7CB75998 (2092390808)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 2002, flow_id: SW:2, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4556997/3076)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xB896F6C6 (3096901318)
transform: esp - esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 2001, flow_id: SW:1, crypto card: IPSEC
calendar of his: service life remaining (k/s) key: (4556997/3076)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
I can provide more information if necessary.
Thanks in advance for any help,
CJ
ISAKMP uses UDP/500 and it is true he helped through phase 1 being upwards (QM_IDLE).
IPSec uses ESP or UDP/4500, and this is what must be authorized by the FW.
-
Safe on Etherchanel / 802.3ad, it works with vmware esx?
Trunk etherchanel in cisco switch configuration, it works with vmware esx?
Configuration of the Cisco switch like that (I don't have a switch, can not test it):
src-dst-ip port-channel load-balance
the interface vlan 4094
no ip address
Interface Port - Channel 1
switchport
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed all the VLANs
switchport trunk vlan 4094 native
no ip address
interface GigabitEthernet1/1
switchport
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed all the VLANs
switchport trunk vlan 4094 native
no ip address
Chanel-Group 1 mode on
interface GigabitEthernet1/2
switchport
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk allowed all the VLANs
switchport trunk vlan 4094 native
no ip address
Chanel-Group 1 mode on
endWhat you have should work OK, because it is not too different from the example of work from my lab:
ocs4948-1 #sh int item in gi1/2nd round
Building configuration...
Current configuration: 536 bytes
!
interface GigabitEthernet1/2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 2.10
switchport mode trunk
MTU 9198
channel-group 64 mode on
spanning tree portfast
spanning tree enable bpduguard
endocs4948-1 #sh run int item in gi1/6
Building configuration...
Current configuration: 536 bytes
!
interface GigabitEthernet1/6
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 2.10
switchport mode trunk
MTU 9198
channel-group 64 mode on
spanning tree portfast
spanning tree enable bpduguard
endocs4948-1 #sh run int in64
Building configuration...
Current configuration: 291 bytes
!
Interface Port-channel64
Description esx402 LACP link
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 2.10
switchport mode trunk
MTU 9198
load-interval 30
Storm-control broadcasts 5.00
spanning tree portfast
spanning tree enable bpduguard
endocs4948-1 #sh int trunk
VLAN Mode Encapsulation native port State
In64 on 802. 1 q trunking 1Port VLAN allowed on trunk
In64 2.10Port VLAN authorized and active in the field of management
In64 2.10VLAN port extending on transmission State and no tree pruned
In64 2.10The only thing to look at will be the VLANs that you got set up on the vSwitch. You have defined VLAN native example, the VLAN untagged on the switch to be 4094, any traffic sent on the aura tags trunk VLAN, which will be removed by the vSwitch.
In my setup, I have established groups of ports using VLANS and VLAN 2 10. Traffic to the virtual machines on these VLANs are .1Q marked by the physical switch, which is then stripped by the vSwitch.
Take a look at the section "VLAN in VMware Infrastructure" on page 7 the concepts of virtual networking André already mentioned, but also the other interesting reading material is http://www.vmware.com/pdf/esx3_vlan_wp.pdf.
Finally, for the side of the switch of things, look at the examples on Scott Lowe's blog at http://blog.scottlowe.org/2006/12/04/esx-server-nic-teaming-and-vlan-trunking/.
Concerning
-
How can I control or change the ID3 tags with the new v12.4 of iTunes?
On the latest version of iTunes (12.3), right click on a file gave the option "Convert ID3 Tags"... ».
But with the new iTunes (12.4), this option has disappeared and I can't find a way to control the tag on mp3s.
Mr Apple, why put obstacles for those working?
It is still possible, but is no longer a part of the menu of right - or control-click option. Now, it is available at:
- File / create new Version...
Don't know why it was deleted, but Apple say:
Maybe you are looking for
-
Why a white dot appears on the left side of the screen when I have Shockwave flash on?
The Shockwave Flash version is 11.1.102.62. The White appears on sites that use flash objects. In this case the last 3 days. When I disable this add-on disapperas dot but the flash object support.
-
HP compaq 6710 b: compat hp, software configuration
Hi people first time user ull have to be patient with me I have a laptop hp compaq 6710 b (old I know) that i bought second-hand, but its perfect for what I need to do, I was in the process of downgrading from vista to xp and the only way I could see
-
HP Envy - gestures touch no longer work
I've had this laptop for about 4 months and everything was fine until a few weeks ago. When I got it, I was able to use two fingers on the mouse pad little Gizmo to scroll to the top and bottom of the pages. That no longer works. I was also able to
-
printer stops with the error message
CP3505n guard error 49.4C02 extinguish, put display running, what I'm doing, but it keeps just showing the same error
-
BSOD driver_irql_not_less_or_equal
Hi guys I have a problem and I don't know how to solve this problem. I you link the minidump. https://www.dropbox.com/s/h668a3c46tcqlfp/111215-16816-01.zip?DL=0