How to manage the Tags with PowerCli

Similar Questions

• How to manage the selection with the box in a table

  Hello

  
  

  JDev 11.1.2.4

  I have a table with an attribute of EO/VO, transitional to manage the selection. This attribute is displayed as a check box. The user makes a selection by clicking on the checkbox. Then, the user clicks on a button that displays a pop-up window. Inside of this pop-up window, that user can create, insert, delete, or update values in a table based on an other EO/VO.

  When the user clicks OK, the pop-up window is closed, then the data is committed.

  When the user clicks Cancel, the popup is closed and the changed data are ignored. To remove the data, I call a Rollback. It works fine, but all the transitory values are lost which is correct because of the discount after the cancellation.

  It's a problem because the user must be able to open the pop-up window several times with the same selection. This means that the restoration is not appropriate in this case.

  How to ignore data edited inside the pop-up window and keep the selection?

  Thank you

  You can try to put the popup in his own taskflow and define a backup point before entering the taskflow. When the user cancel the editing restore you to previous backup. This should dispel the changes.

  Or you save the selected rowkeys, call rollback and backward selection later.

  Timo

• How to manage the medium with #missing

  Hello everyone,

  I'm still pretty new to implement Calc and I'm trying to calculate balances average periods except when an intersection is #missing or 0.  For example, the following code works but is not the proper syntax and I was trying to find a way to improve it.

  DIFFICULTY (/ * SUN: scenario * / 'FcstDev' / * SUN: Version * / 'Final', / * SUN: cost Center * / "831")

  
  DIFFICULTY (& FcstYear1, & fcstPerStart: 'Dec')

  ("Securities taxable"
  IF (@ISMBR ("End") AND ("Taxable securities" is #Missing or 'Taxable securities' == 0))
  'Taxable securities values'-> 'Avg' = #Missing;
  ON THE OTHER
  "Taxable securities'-> 'Avg' = (@PRIOR ("securities of taxable"->"End") + (" taxable securities '->' end ')) / 2;
  ENDIF ;)

  ENDFIX

  ENDFIX

  I do not know how to handle my cross-dims 'Avg' is calculated based on 'end '.  Any suggestions would be greatly appreciated

  Thank you

  Bret

  fairytale watch functions @avgrange and @currmbrrange I think that will do what you want with less work than what you have coded

• How to manage the server with a private ip address, which is NAT'd a routable ip address?

  Hello

  My display server has multiple servers that sit behind firewalls. The NAT firewall their ips to a private address space routable ip address. My problem is that I do not get a display of these servers. Firewalls are configured to allow tcp port 1984 to the display server. I ran a sniffer package on the source and the display server. I can see that the packets leave the source server and they hit the display server, however, nothing is displayed. BB-hosts, I have routable ip address. He made the ping and ssh test and reports those, but nothing else. I have private IP routable ip address in the security file. Any suggestions on what I may be missing?

  Kind regards

  Brad

  Hi Brad,

  If you can see the State of BB messages leaving your client machines, and you can see them coming in your BBDISPLAY server, then you can treat a case problem, or, perhaps your BB customers are defined with different names within your bb-hosts file.

  Check $BBVAR/logs on your BBServer for status messages files that look like they came from one of the BB clients that do not appear on your BBDISPLAY.

  If you can see the files of newspapers of status of these $BBVAR BB clients / newspapers my suspicions are correct. There is incompatibility between the BB customer name and the name of the customer in bb-hosts on your BB BBDISPLAY.

  Thank you
  Paul

• How to manage the tv after hdmi to hdmi connection

  I want to connect to my computer windows 7 with tv on my Vizio tv hd tuner. I intend to use the hdmi to hdmi connections. After that I made the connection how to manage the tv without going back to the computer. My TV is in another adjacent room to my computer, sbout 20 ft away. Can I use a wireless mouse to manage the tv? The monitor and tv both appear at the same time? What are other options? Thank you for taking my question and to meet others, I put in the forum. Donnie

  I guess that the xbox 360 is a must for my setup. Thanks for your reply, Donnie

• How to manage the SOAP response

  Hello (beginner vCO),

  I use the SOAP Plugin and trying to figure out how to manage the here, a host of SOAP response is the log I get the SOAP response

  [12:53:43.124 2014-05-09] [I] the settings...

  [12:53:43.135 2014-05-09] [I] the available settings:

  [12:53:43.136 2014-05-09] [I] + parameter name: "GetRequestStatusResult", value: "< response >

  < item >

  < ServiceRequestID > SR138917 < / ServiceRequestID >

  OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >

  < ServiceRequestCreated > 09/05/2014-15:20:25 < / ServiceRequestCreated >

  < ServiceRequestCompleted > < / ServiceRequestCompleted >

  MA138921 < CurrentActivity > < / CurrentActivity >

  OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >

  < ActivityStartUTC > 09/05/2014-15:32 < / ActivityStartUTC >

  < ActivityEndUTC > < / ActivityEndUTC >

  < DurationTotalSeconds > < / DurationTotalSeconds >

  < AverageDurationSeconds > < / AverageDurationSeconds >

  < SecondsOffAverage > < / SecondsOffAverage >

  < EstimatedCompletionUTC > < / EstimatedCompletionUTC >

  < / OutputParameters >

  < warning > < / warnings >

  < exceptions > < / Exceptions >

  < / response > '

  It will be better to try and parse text or try and use another method with vCO

  If you haven't done so already, take a look at the action of com.vmware.libarary.soap.processOutParameters.  It is the action that generated the log you have placed in us.  It generates an object Properties (key, value pairs) with the value for each setting that results.

  In your case, assuming that 'outProps' is the result of the above, you can use:

  var getRequestStatusResult = outProps.get ("GetRequestStatusResult");

  And to analyze the code XML with E4X as Ilian said.

• Windows 8.1 in Adobe Illustrator, I tried to copy my design &amp; tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appeara

  Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appearance. Thank you.

  Hi GANESHKUMARAPILLAI CHRYSTELLE,.

  Here is a link for color management workflows in Illustrator.

  It is best to place the image instead of paste into Illustrator. When you paste the images they are in RGB color format. Make sure your document is a RGB file

  Click on these links for more information.

  Understand the workflow of the CC of individual course Illustrator color management: Advanced

  Creative Suite * keeping colors consistent

  Implement the print color management workflow. Illustrator, InDesign, Photoshop

  Concerning

  Scott

• I need help, how to configure virtual machines with PowerCLI IP addresses

  Hi all

  I open this topic because I really need your help.

  I wrote a script that can automatically create 10 VMs on my ESX Server.

  I run the script with PowerCLI.

  I want now to help script, give the ip on the 10 machines created settings.

  I don't know how, can you enlighten me on this subject?

  Is there a script that can do this?

  Thank you very much.

  Isn't the "0.2 | ForEach-Object {"a loop for? IMHO, it is a loop in the PowerShell way.

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• How to play the song with .wma extension

  How to play the song with .wma extension

  If it does not DRM, use VLC. If so, no Mac OS X software can play or convert.

  (142864)

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How to have the sidebar with thumbnails by default in the application preview? Whenever I open a PDF file, there is no sidebar.

  How to have the sidebar with thumbnails by default in the application preview?

  I'm on OSX El Capitan 10.11.3 on iMac, and whenever I open a PDF file, there is no sidebar. I have to every time click on the Sidebar icon, then select the thumbnails. I would like to be on by default, but cannot find the option or how to edit the plist file...

  If the thumbnails is checked in the menu 'View' preview, it should always open a PDF file with the open sidebar. Unless of course, it's a single page PDF.

• I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  Hello J,

  in the example given here , it looks like a format simple bytestream...

  You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...

  Encoding will work the same but in reverse

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• How to concatenate the string with a digital command?

  Hello

  How to concatenate the string with a digital command?

  Thank you.

  

  I think I forgot to add the semicolon, what you can do is, drag the CONCATENATE function and add semicolon.