8600 more duplex in Word format - no option shows

Similar Questions

• OfficeJet pro 8600 more: the same words randomly at the top of each printed page

  whenever I print things from anywhere other than microsoft word, all pages have the same randomly a few words on top... the name of the place, my son made his eagle project... so weird!  I don't know why, it's there or how to get rid of

  Hello

  Please check the header and footer settings in the application you are trying to print.

  Also, try to print using Notepad and check if the problem persists.

• "Scan To E-mail" configuration on HP Officejet Pro 8600 more N911g

  It's the same problem reported by several other users of this forum to which no solution has been provided.
  
  I was not successful to set up the scan e-mail option for a HP Officejet Pro 8600 more N911g bought 12 August 2012 and using CLP1CN1150CR firmware.
  
  I'm trying to do through the interface of the Web server built into the printer from an iMac running Mac OS X 10.6.8 and the 5.8.0 HP utility.  More specifically the page under 'outgoing Scan-> Scan to E-mail-> e-mail profiles.
  
  I tried 2 SMTP from different servers, each one works well to send the email from the computer: Apple iCloud mail service (formerly Mobile Me, formerly known as.) Mac) and AT & T Net messaging service.  I checked the server name, port number, and authentication login and password were all correct.
  
  When scanning to email serves as the printer, I get an error message: unable to connect to the server.  Check the address and the name of the server.
  
  During a test of the computer when configuring a profile of outgoing mail, I get an error message: the device was unable to send the test e-mail message. (EmailAccounts-timeout).
  
  When I try to configure the page under "Settings-> E-mail Alerts-> mail server" and use exactly the same values as those in the e-mail profile out above, registration and Test option fails with an error message: the device was unable to send the test e-mail message.
  
  Oddly enough, I am able to use the client to the computer with the option scan to the computer-> e-mail in PDF format or by e-mail in JPEG format.  With this option, the file is scanned and added as an attachment to an e-mail message from the Mail in Mac OS X client.  The e-mail message is sent via SMTP server even when I press the button send.
  
  All the error messages seem to indicate that the client software of electronic mail of the printer is unable to establish a connection to the SMTP server.  However, it is unclear what configuration setting is one that could be the cause of the problem.

  After further research, I noticed that there is another default possible values of port Simple Mail Transfer Protocol (SMTP):

  • Port 25 is the standard SMTP port number.
  • Port 465 is the number of SMTP over SSL, Secure SMTP (SSMTP) port.
  • Port 587 corresponds to the port number dedicated for a presentation Mail (MSA) Agent that uses a variant of SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the filing of mail service.

• HP Officejet Pro 8600 more

  I have a HP Officejet Pro 8600 more and I can no longer scan multiple pages in a document using the ADF and flatbed. I was able to do before. Help, please.

  Have you recently had to reinstall the software or to reset the default settings? In this case, when you go to scan in the pop up window that shows that there should be an option to "move forward." In this window, you can set up your printer to scan in a single document, as opposed to separate in the PDF format.

  Let me know if it helps!

• 8600 Officejet Duplex Scan and Eprint

  I have a question on the HP Officejet Pro 8600. I have a Mac and Mac OS x installed Lion:

  (1) how to scan HP scan3 2sided/duplex?  There is no option to choose to scan duplex, I have installed duplex accessory and I checked in the system Prefereneces > Print & Fax > Open print queue > Configuration printer > driver > HP 2 accessory sides of impression. See the image of what my options and screen looks like.

  (2) how can I configure my eprint settings when I print through Google Cloud or to my email to the printer to print duplex/2sided? I have looked at the online account but couldn't find an option to print

  Hello

  You have the 8600 OfficeJet from HP (N911a) or the sign more (N911g) or model Premium (N911n)?

  Only the last two models offer features of duplex ADF (copy of original 2 faces), the basic model only provide double-sided printing.

  The ePrint service does not support duplex printing, you can find that he listed in the documentation of ePrint:

  Are there any limitations that I should be aware of when using ePrint?
  Duplexing (printing on both sides of the page) is not supported.http://support.hp.com/us-en/document/c03721293
  

  You can work around this limitation by using the mobile software HP ePrint, which allow printing to a remote printer using the software on your Mac:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=22744&prodSeriesId=5098100&prodNameId=5098101&swEnvOID=219&swLang=8&mode=2&taskId=135&swItem=ds-104730-2

  Once the software is installed, you can access it from the print in the drop of PDf dialog box.

  Kind regards

  Shlomi

• officepro 8600 more do not select the default tray paper

  Second paper tray added OfficePro 8600 more.   Printer recognizes second tray to tray 2.  Changed to render settings of the printer tray default 2.

  Funtion copy to printer takes only of the plateau which had envelopes.

  Browsers (Fire Fox) also print only from the Board one, what is envelopes.

  Settings in Microsoft Office implemented so that Word prints correctly.

  How can I tell the printer to select tray 2 paper letter?

  Thank you.

  I see that you are having problems with the 2nd set, this can be confusing. You will need to go into the actual printer settings and change TRAY 2 as default. On the touch screen, select:

  1. click on the configuration Menu
  2. click on Preferences
  3. default tray
  4. Select tray 2

  After selecting this option, and then try to print and see how it goes. Don't forget with the 2nd plateau, its not installed with printer drivers, so you have to put all the letter paper in TRAY 2 (as you already have). Any other type of paper (legal, envelopes, etc.) will still go into Tray 1.

  Let me know if this can help, thank you.

• Export a Script since Adobe Story more in Microsoft Word

  I wrote a script in Adobe Story more and I need to export it to Microsoft Word for my final project in school... The option to export as-> HTM MS Word Compatible (.htm) is disabled (grayed on so that I can not click on it) and I think it's him that I need. I had it exported to .pdf but it isn't just... copy it copies the text but does not save the appropriate script format. I tried all the available export options and none of them will save the correct script format when I put it into my Word document.

  I just waited on the phone for almost 20 minutes and no agent Adobe never wouldn't come on the line. I used the online chat with an option of the agent and waited 15 minutes for the agent to tell me that they are not trained on Adobe Story.

  Help?

  Sorry, but you cannot export a script in Word format.

  Can you please give pdf conversion Word to try?

  You can try Acrobat: doc conversion of PDF to word, PDF to Word Converter | Adobe Acrobat DC

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• OFFICEJET PRO 8600 Plus: OFFICEJET pro 8600 more

  I have been using my OFFICEJET pro 8600 more for a few years with no problems until now. It is connected wireless to my network and it is unusual. I can print a single item and then it loses the connection. I have to turn the printer off and power turn it back on, then I can print another point and it disconnects again...

  very frustrating that someone knows how to fix this?

  I use Apple and PC. Same question with all devices and computers.

  Thank you

  Greg

  Hello! Welcome to the HP community @WilSwann,

  I have seen your post on how your printer is disconnect your wireless network and wanted to answer with my suggestions.

  Check out this link and try all the steps that are listed here. Normally, they help with this type of concern and hope that they will help fix yours too!

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  If there are any problems, please let me know
  
  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• How can I get my HP Officejet Pro 8600 more to scan a full legal size paper?

  How can I get my HP Officejet Pro 8600 more to scan a full legal size paper? He cut scanning letter-size, but the specifications say it will scan the legal size.

  Hello

  The analysis of parameters need to be changed to HP Scan App. launch of the HP scan application from your computer and select the option left (PDF or JPEG...) and then choose the size of legal scan on the right.

  Save and close the application.

  Now you can scan in legal.

  Note:

  You can also create your own settings for scanning HP scanning parameters.

  Good impression

  Evelyne

• HP officejet pro 8600 more: double side id or copy scan

  Hey,.

  I have hp officejet pro 8600 and I'm unable to scan or copy id cards on both sides.

  y at - it an option for scanning on part and other identification cards or copy bothh sides of ID card?

  can you please help me with it, because I really scan identity cards, the two side to my computer.

  "" and if there is no video or tutorial on scannig or copy on both sides of the identity card for "hp officejet pro 8600 more ' and then share it with me.

  Thanl you.

  Hi @Sanky1,

  While the document feeder allows the 2 sided copy and scan, the loader will feed not IDENTITY cards. What you can do, is copy each side individually, then put two copies on the document feeder and scan 2 faces. If you want both sides of the card on a single page, same idea, copy both sides individually, then place them copies on the glass to scan so that they are aligned with a scanned page.

  I hope this helps. If you need further explanation or assistance, let me know.

• How do set you the time, date and month on the HP Officejet Pro 8600 more

  How do you set the month, Date and time on the Officejet Pro 8600 more?

  Hello

  The screen of the device press setup and go to prefferances, and then press ok. There you should see the option "time and date". You can set it from there.

• HP Deskjet Ink Advantage 2060: I can print in Word format, but not in MS Excel

  Hello, I've just joined this forum and I am new on this.

  I just want to ask for help regarding our printer at the school. I had problem printing in MS Excel, I installed the printer and set as a default value, but still is not printing. When I tried to print, it will just say "Document pending to print" then it will disappear. I tried to install again, and then I had a copy of the printer HP Deskjet Ink Advantage 2060 (1 copy), that I now use to print in Word format and it works, but I found the problem when I tried printing in Excel. I tried to select the copy of the printer but it does not display and only the default is illustrated - in the printer list when you print without printer HP DEskjet (1 copy) is displayed. Everything I do now is copy from Excel and paste the word so I could print the document. I also tried reinstalling the printer but still the same. Help, please.

  -Hopefully I explained it clearly. Thank you.

  Hi @totemnPaul,

  Welcome to the HP Forums support and thank you for reaching out! Although you may have to contact your school IT Department, I'd be happy to everything I can to help. From your description, I understand that you have difficulties when you try to print from Excel.

  Please first try printing HP and doctor Scan.  Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

  Please note, as the issue seems to be limited to those of Microsoft, you might consider reaching out to the Microsoft Support.

• 8600 more fails to Printer preferences

  I installed an 8600 more my WIN 7 32 bit Dell XPS 1530.  Everything works, BUT when I select set printer preferences, a box flashes and disappears before I can read it.

  This happens in the HP software, MS Word and 8600 printer in Control Panel.  Something seems to be blocking access to this feature.

  I spent hours on HP chat support.  I have disabled the firewall.  Installed and reinstalled.  Removed all other drivers of HP.  And so on.

  Does anyone have ideas until I return the printer?

  Thank you

  David

  Hi LevinDP,

  It seems the BONE contributes to the issue. I would like to check this by installing on another computer, and if you do not have the issue is when I tell a system recovery. Let me know what you find?