877W customer VPN to the top, but no traffic

Hi guru of cisco

Help me please to solve the problem of traffic of VPN client. I am able to connect to cisco, but failed to get a network, except the router access.

I also want to block all P2P traffic except 1 IP 192.168.10.7.

Thank you

He is out of #show cry ipsec his

Interface: virtual-Access4
Tag crypto map: addr virtual-Access4-head-0, local a.a.a.a

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.10.251/255.255.255.255/0/0)
current_peer b.b.b.b port 56604
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 26, #pkts decrypt: 26, #pkts check: 26
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

-More - local crypto endpt. : a.a.a.a, remote Start crypto. : b.b.b.b
-More - path mtu 1500, mtu 1500 ip, ip mtu IDB virtual-Access4
-More - spi outgoing current: 0 x 66870874 (1720125556)
-More-
-More - esp sas on arrival:
-More - spi: 0xBDA0E6DE (3181438686)
-More - transform: esp-3des esp-sha-hmac.
-Other - running parameters = {Tunnel,}
-More - conn id: 369, flow_id: Motorola SEC 1.0:369, card crypto: Virtual-Access4-head-0
-More calendar - its: service life remaining (k/s) key: (4543855/3494)
-More size - IV: 8 bytes
-More - support for replay detection: Y
-Other - status: ACTIVE
-More-
-Other - arrival ah sas:
-More-
-More - CFP sas on arrival:
-More-
-More - outgoing esp sas:
-More - spi: 0 x 66870874 (1720125556)
-More - transform: esp-3des esp-sha-hmac.
-Other - running parameters = {Tunnel,}
-More - conn id: 370, flow_id: Motorola SEC 1.0:370, card crypto: Virtual-Access4-head-0
-More calendar - its: service life remaining (k/s) key: (4543859/3494)
-More size - IV: 8 bytes
-More - support for replay detection: Y
-Other - status: ACTIVE
-More-
-More - out ah sas:
-More-
-More - out CFP sas:

And the config of the router:

version 12.4
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
sequence numbers service
No dhcp service
!
router host name
!
boot-start-marker
boot-end-marker
!
Security of authentication failure rate 3 log
logging buffered 52000
recording console critical
enable secret 5
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authentication login ciscocp_vpn_xauth_ml_2 local
AAA of authentication ppp default local
AAA authorization exec default local
AAA authorization network default authenticated if
AAA authorization ciscocp_vpn_group_ml_1 LAN
AAA authorization network if authenticated local_auth
AAA authorization ciscocp_vpn_group_ml_2 LAN
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-1933852417
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1933852417
revocation checking no
rsakeypair TP-self-signed-1933852417
!
!
TP-self-signed-1933852417 crypto pki certificate chain
certificate self-signed 01
30820252 308201BB A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31393333 38353234 6174652D 3137301E 170 3130 30383137 31323438
31365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 39333338 65642D
35323431 3730819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100C0D8 05ECA4BC 68540261 576BAD7D 23F29679 B60A7B38 35211BCF 78F2271C
2FDB24CC B 949640, 9 D68C9308 58BAAB0A 5FBD8123 42 12922 F2AE7C93 6EF24910
AD777AB3 DD923F06 CB6B6106 9C08AA81 E7CEB073 1F6BC114 B0B1756D ECF976CC
C0073FB2 2C056FD9 7F361152 0DCB08C4 3EA559F5 575EF2F4 1A5FD373 552348B 0
010001A 3 7 509F0203 HAS 1 130101 FF040530 030101FF 30250603 307830 0F060355
551D 1104 1E301C82 1A6A6572 6963686F 2 D 727472 72696368 6F2E636F 312E6A65
2E6E7A30 1 230418 30168014 E1FAAC42 678187 3 D2BFEF05 6F70C504 1F060355
00D12F67 301D 0603 551D0E04 160414E1 FAAC426F 678187 2 BFEF0500 70C5043D
D12F6730 0D06092A 864886F7 0D DFC4C826 E8C4CD12 010104 05000381 8100A 630
4D8C4BB8 B9928B43 4C8B91A2 F6A400B5 97EB0BF7 7ACFE10A BA90056B 6E34FE2F
DAC133EC F0E847DD A7AA6B78 C01AE543 597E7149 85 HAS 17614 EEFEFF4B 076E1758
44A250D9 3DE2EF88 63233AF0 7D2DD2BD 1221D59C 0731CFE3 26B31F88 13F48ACC
ED2972C5 FCCF6D43 681BF350 CE01C5E9 41E9705A CJF
quit smoking
dot11 syslog
!
dot11 WIFI ssid
open authentication
authentication wpa key management
Comments-mode
ascii secret 7 WPA - psk
!
no ip source route
IP cef
!
!
!
!
no ip bootp Server
no ip domain search
IP domain name of domain
Server dhcp IP 192.168.10.10
!
Authenticated MultiLink bundle-name Panel
VPDN enable
!
VPDN-Group 1
! Default L2TP VPDN group
accept-dialin
L2tp Protocol
virtual-model 1
receive window 256-tunnel L2TP
!
aes encryption password
!
!
username admin privilege 15 very secret 5 secret
username privilege 15 7 n1ck passes
!
!
crypto ISAKMP policy 1
preshared authentication
!
crypto ISAKMP policy 2
preshared authentication
!
crypto ISAKMP policy 3
preshared authentication
!
crypto ISAKMP policy 4
BA 3des
md5 hash
preshared authentication
Group 2
life 3600
crypto ISAKMP key 6 key address c.c.c.c
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto nat keepalive 10
!
Configuration group customer isakmp crypto EasyVPN
key 6 key
DNS 192.168.10.10
domain domain
pool SDM_POOL_1
ACL 100
Save-password
include-local-lan
Max-users 2
netmask 255.255.255.0
!
Configuration group customer crypto isakmp ASA
key 6 key
pool SDM_POOL_1
Firewall are u there
include-local-lan
PFS
Max-users 2
Max-Connections 1
netmask 255.255.255.0
!
ISAKMP crypto group configuration of VPN client
key 6 key
DIAL-IN pool
ACL 103
include-local-lan
Max-users 2
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
Group of EasyVPN identity match
match of group identity ASA
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
Crypto isakmp CiscoCP_Profile2-ike-profile-1 profile
identity VPN group match
client authentication list ciscocp_vpn_xauth_ml_2
ISAKMP authorization list ciscocp_vpn_group_ml_2
client configuration address respond
virtual-model 5
!
!
Crypto ipsec transform-set esp - esp-sha-hmac ASA-IPSEC
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA2-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security-association value 900 idle time
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
Profile of crypto ipsec CiscoCP_Profile2
Set the security association idle time 1200
game of transformation-ESP-3DES-SHA1
set of isakmp - profile CiscoCP_Profile2-ike-profile-1
!
!
map SDM_CMAP_1 2 ipsec-isakmp crypto
the value of c.c.c.c peer
game of transformation-ASA-IPSEC
match address 160
!
Crypto ctcp
Archives
The config log
hidekeys
!
!
synwait-time of tcp IP 10
!
class-map match-all P2P
Description speed limit P2P
match the edonkey Protocol
bittorrent Protocol game
fasttrack Protocol game
gnutella Protocol game
match Protocol kazaa2
class-map correspondence-any BLOCK
match Protocol kazaa2
bittorrent Protocol game
match the edonkey Protocol
gnutella Protocol game
fasttrack Protocol game
!
!
Policy-map BLOCK_INTERNET
class BLOCK
bandwidth 8
!
!
Bridge IRB
!
!
interface Loopback0
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
Null0 interface
no ip unreachable
!
ATM0 interface
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
No atm ilmi-keepalive
DSL-automatic operation mode
!
point-to-point interface ATM0.1
Description $ES_WAN$
no ip redirection
no ip unreachable
no ip proxy-arp
PVC 0/100
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
switchport mode trunk
!
interface FastEthernet3
!
interface virtual-Template1
Description $FW_INSIDE$
BVI1 IP unnumbered
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
route IP cache flow
peer default ip address dhcp
PPP mppe auto encryption required
ms-chap-v2, ms-chap PPP authentication PAP
!
interface virtual-Template2
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
type of interface virtual-Template3 tunnel
Description $FW_INSIDE$
Unnumbered IP Dialer0
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
tunnel type of interface virtual-table 5
Description $FW_INSIDE$
BVI1 IP unnumbered
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile2 ipsec protection profile
!
interface Dot11Radio0
no ip address
penetration of the IP stream
route IP cache flow
!
algorithms for encryption tkip encryption mode
!
SSID WIFI
!
Speed basic - 1.0 basic - 2.0 basic - 5.5 Basic6.0 basic - 9.0 basic-11, 0-12, 0-basic basic-18, 0 24 basic, basic 0-36, 0 48 basic, basic 0-54, 0
root of station-role
No cdp enable
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Vlan1
no ip address
IP nat inside
IP virtual-reassembly
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface Vlan2
Description $FW_INSIDE$
IP 192.168.11.254 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
interface Dialer0
Description $OUTSIDE$ $FW_OUTSIDE$
the negotiated IP address
IP access-group sdm_dialer0_in in
IP access-group 101 out
no ip redirection
no ip unreachable
no ip proxy-arp
NBAR IP protocol discovery
NAT outside IP
IP virtual-reassembly
encapsulation ppp
route IP cache flow
Dialer pool 1
Dialer-Group 1
PPP pap sent-name of user username 7 password password
PPP ipcp dns request
failure to track PPP ipcp
map SDM_CMAP_1 crypto
out of service-policy BLOCK_INTERNET
!
interface Dialer1
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
route IP cache flow
!
interface BVI1
Description $FW_INSIDE$
IP address 192.168.10.254 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
NBAR IP protocol discovery
IP nat inside
IP virtual-reassembly
route IP cache flow
!
local IP DIAL-IN 192.168.10.251 pool 192.168.10.253
local IP SDM_POOL_1 192.168.10.50 pool 192.168.10.51
no ip classless
IP forward-Protocol ND
!
IP flow-cache timeout active 1
The Dot11Radio0 flow-export source IP
IP flow-export version 9
192.168.10.200 IP flow-export destination 9996
!
IP http server
local IP http authentication
IP http secure server
The dns server IP
IP nat inside source static tcp 192.168.10.19 443 Dialer0 443 interface
IP nat inside source static tcp 192.168.10.8 Dialer0 5900 5900 interface
IP nat inside source udp static a.a.a.a 500 Dialer0 500 interface
IP nat inside source static tcp 192.168.10.130 9090 interface Dialer0 9090
overload of IP nat inside source list NAT_INTERNET interface Dialer0
IP nat inside source udp static a.a.a.a 4500 Dialer0 4500 interface
IP nat inside source static tcp 192.168.10.9 1723 1723 Dialer0 interface
IP nat inside source static udp 192.168.10.150 514 interface Dialer0 514
IP nat inside source static tcp 192.168.10.150 Dialer0 1468 1468 interface
!
NAT_INTERNET extended IP access list
deny ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
permit ip 192.168.10.0 0.0.0.255 any
NAT_INTERNET_1 extended IP access list
deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
permit ip 192.168.10.0 0.0.0.255 any
sdm_dialer0_in extended IP access list
Note the category CCP_ACL = 1
enable ahp c.c.c.c one host
Note allow all
allow an ip
allow a host c.c.c.c esp
permit any isakmp udp host c.c.c.c eq
all eq non500-isakmp udp host c.c.c.c permit
enable ahp c.c.c.c one host
allow a host c.c.c.c esp
IP 192.168.17.0 allow 0.0.0.255 192.168.10.0 0.0.0.255
ip permit 192.168.1.0 0.0.0.255 192.168.10.0 0.0.0.255
refuse the host ip 209.239.31.195 no matter what paper
refuse the host ip 98.108.59.171 no matter what paper
!
recording of debug trap
logging 192.168.10.150
Note access-list 1 #NAT INTERNET USERS.
access-list 1 permit 192.168.10.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
access-list 100 permit ip 192.168.10.0 host everything
Note access-list 101 RULES for FW to the INTERNET
access-list 101 deny ip no matter what newspaper to host 121.22.6.121
access-list 101 deny ip no matter what newspaper to host 74.120.10.51
access-list 101 deny ip no matter what newspaper to host 112.230.192.99
access-list 101 deny ip no matter what newspaper to host 61.55.167.19
access list 101 ip allow a whole
access-list 101 deny ip 192.168.10.0 0.0.0.255 192.168.0.0 0.0.255.255
access-list 101 permit ip 192.168.17.0 0.0.0.255 any
Note access-list 101 Cisco_VPN_10000
access-list 101 permit tcp 119.224.0.0 0.0.255.255 connect any EQ 10000
Note access-list 101 Cisco_VPN_500
access-list 101 permit udp any any eq non500-isakmp log
Note access-list 101 Cisco_VPN_4500
access-list 101 permit udp any any eq isakmp newspaper
access-list 101 permit tcp any host a.a.a.a eq 81
access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
access-list 101 deny ip 169.254.0.0 0.0.255.255 everything
access-list 101 deny ip 172.16.0.0 0.15.255.255 all
access-list 101 deny ip 192.0.2.0 0.0.0.255 any
access-list 101 deny ip 198.18.0.0 0.1.255.255 all
access-list 101 deny ip 224.0.0.0 0.15.255.255 all
Note access-list 101 OWA
access-list 101 permit tcp any any eq 443 newspaper
Note access-list 101 port VNC
access-list 101 permit tcp 119.224.0.0 0.0.255.255 connect any EQ 5900
Note access-list 101 service CRM 8081
access-list 101 permit tcp any any eq 8081 newspaper
Note access-list 101 Syslog to ASA1
access-list 101 permit udp host c.c.c.c eq syslog all eq syslog
Note access-list 101 Syslog for ASA2
access-list 101 permit udp any any eq syslog
access-list 102 tcp refuse any any eq 445 newspaper
Note access-list 103 CCP_ACL category = 4
access-list 103 permit ip 192.168.10.0 0.0.0.255 any
Note access-list 115 CCP_ACL category = 16
access-list 115 permit ip 192.168.10.0 0.0.0.255 192.168.0.0 0.0.255.255
access-list 120 permit ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 130 refuse ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 130 allow ip 129.168.10.0 0.0.0.255 any
access-list 130 permit ip 192.168.10.0 0.0.0.255 any
access-list 140 permit ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 150 deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 150 deny ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 any
access-list 160 permit ip 192.168.10.0 0.0.0.255 192.168.17.0 0.0.0.255
access-list 160 permit ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
Server SNMP ifindex persist
not run cdp
!
!
!
sheep allowed 10 route map
corresponds to the IP 150
!
!
control plan
!

!

Line con 0
no activation of the modem
line to 0
line vty 0 4
password password 7
authentication of the local connection
!
max-task-time 5000 Planner
Scheduler allocate 4000 1000
Scheduler interval 500
end

1. use a "pool of ip" vpn client in a subnet that does not overlap with any of your internal network.

Currently two IP pools are overlapping with subnet of the interface BVI1.

2. ensure that VPN traffic is bypassed by NAT.

Tags: Cisco Security

Similar Questions

  • VPN Tunnel to the TOP but no traffic passing (PIX515)

    I'll put up a remote engineers access to off-site to access my network (using the cisco vpn client). I use PIX 515E software version 7.0 (3) 20 as a vpn server. I can establish a tunnel, but I can't access network resources. I can ping the external interface of the PIX. This is my setup: internet-router-pix-dmz(server farm). Please find attached my setup. Thanks in advance.

    After a glance at your policy, it seems that the Pool of IP, that is assigned to the clients behind the outside interface, runs behind the DMZ. I don't think it will work.

    In addition, defined distribution policy seems to be backward. Im sure that you intend to send traffic FROM the IP pool to 196.26.12.64/26. Your acl split is the opposite.

    In addition, your routing table does not contain a route for the 196 network, so the firewall will use the default route to the outside. If this is intentional, the clients and dst are on the outside, which is considered to be crossed. This is allowed on the SAA only with the same security setting configured.

  • print jobs in the queue from the computer to the top, but do not print

    1400 series all-in-one print jobs in the queue from the computer to the top, but do not print. Scan and copy functions are fine. What is the problem?

    chrismcgo wrote:

    I've upgraded to a new computer with windows 7 a month ago. The printer worked fine until last week. I tried the remedy proposed to other Hp users, but the computer will not accept the software provided with the printer, so the printer is always offline. Any other suggestions?

    I suggest the following: disconnect the cable USB, then download the full driver recommended from HP here.  Once the download is complete, run the Setup program.  Do not connect the USB cable until the installation program invites you to do.

  • E-mail allows you to see the most recent at the top, but now I have to look through all the emails to be received email today. How can I fix it?

    I DON'T KNOW WHY BUT MY MESSAGES IN MY INBOX ARE ALL MUDDLED UP.
    USED TO SEE THE MOST RECENT AT THE TOP NOW, I TUNED THROUGH ALL THE EMAILS TO FIND THE RECEIPT TODAY'S MAIL? Help, please.

    Steve is of course correct.  What mail client do you have?

  • Windows Mail responses contain unwanted additional information at the top but regularly sends don't - want to elimate answers

    I have vista home premium 32 bit on my laptop and I use Windows Mail and I'm having a problem. If a person of my company sends me it comes in fine. When I answer, however, they receive a mess of data at the top of the answer of the message that seems to give them all sorts of information on my laptop and computer-info. If I generate a new email to anyone in my company, they receive those fine. THUS, it seems that you answer is the question.

    Any help out there?  How can I remove these unwanted responses data (and transfers as well by the way)?

    Thank you in advance for your help!

    The problem has been resolved by validating my account in Windows Mail.  I have no idea why it was right and necessary, as I had used it for 2 years, it started to arrive there shortly, but since there were no problems reported so that seems to have solved the problem.  I'm sorry that I can not credit anyone with the answer because no one has suggested this solution and I found on yahoo and tried and it seems to have done the trick.

    Thanks for trying to help.  Still, I'll post here if I have any other questions or problems.

  • The browser again download the latest applications at the top but it does not download anything.

    Firefox rpet "download the latest applications" just above the faucets, but it does not download anything.

    This has happened

    Each time Firefox opened

    == I removed some aps of firefox

    Tools > Addons > > Extensions

    You have a MSN or Bing extension installed?
    If so, disable it.

  • How do to 'Tools - Options Internet' that used to be something I could click on at the top, but now is not anywhere in Windows 7.

    I used to be able to click on 'Tools' then 'Internet Options' in the top of my page in the Solution Explorer, delete cookies and temporary internet files.  With Windows 7, is not in sight.  How do I do that?

    I used to be able to click on 'Tools' then 'Internet Options' in the top of my page in the Solution Explorer, delete cookies and temporary internet files.  With Windows 7, is not in sight.  How do I do that?

    Hello

    You can access Internet Options in control Panel.

    In Internet Explorer, press Alt key to reveal the menu bartemporarily. To make the Menu bar permanently, click on View/Toolbars and select the Menu bar item.

    I hope this helps.

    Thank you for using Windows 7

    Ronnie Vernon MVP

  • Database to the top, but can not access Enterprise Manager or APEX Login

    Newbie here so sorry if it's simple.
    I have already searched the forums and tried to do what is recommended and still have a problem.


    I am running Enterprise 10.2 on a virtual machine from windows XP. It has been working well for some time.
    I restarted the VM without stopping the DB. When it has restarted the database is in place and I can run queries using SQLplus. However I can't load all services via a web page, for example. Enterprise Manager, APEX connection... Also, I can't make a connection using SQL Developer. These were all working well before.

    I already searched these forums and some people have had similar problems when running 10.2 on a virtual machine and it's the listener who has a problem...
    I deleted and reinstalled the listener with Net Configuration Wizard and restarted the DB, but that did not help.

    Here are the results when I use tnsping. Any advice would be really appreciated! Thank you!

    C:\Documents and Settings\XPMUser > tnsping orcl

    AMT Ping Utility for 32-bit Windows: Version 10.2.0.3.0 - Production 18-APR-2
    010 01:07:18

    Copyright (c) 1997, 2006, Oracle. All rights reserved.

    Use settings files:
    C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora


    TNSNAMES adapter used to resolve the alias
    Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos)
    (t) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
    OK (20 ms)

    >
    I set the ORACLE_HOME, but I still get the same error 3 when I try to start the DBconsole.

    I don't know what you mean by which OS is the owner of the tree of Oracle software. It's a virtual machine with a single user XPMuser.

    Thanks for the help underway...
    >

    Maybe it's time that you re-set up DB control.

    emca -config dbcontrol db -repos recreate

    Kind regards
    Phiri

  • Remote VPN on 2801 upward but no traffic

    I decided to set up a remote vpn on 2801 router. so, after some time a get my VPN tunnel to the top and State QM_IDLE but all traffic on VPN Client work around or ignored so I can't access my internal network via the VPN tunnel.
    can you please help?

    Ahhhhhhhhhhhhhhhhhhh, now I know, k first of all if it is the card top debit MOBILE, it is not supported by the vpn client

    Now we have a work around, Setup your 3 g as a connection by modem and boom, it should start working

    Kind regards

    Rebecca

  • HotSpot has been the top but cannot access internet on mobile.

    I use hp probook. I've set up point by using hotspot Wi - Fi hp and wifi is also appering on my mobile on and correctly connected to it also, but when I access internet on my mobile page does not open. It sticks on loading.pls tell me what to do.

    Hello @amritansh 

    To get your question more exposure I suggest you post in the trade forums since the HP ProBook is a commercial product. You can do this here laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

    I hope this helps!

    Thanks for posting on the HP Forums.

  • Computer will not start. Displays F3..., can go together to the top, but nothing else

    I have a MSi U100 running Windows XP Home SP3. After the last successful stop, the machine starts but just displays F3 on the screen, windows is not booting. I've tried rebooting and pressing F8 etc.; to enter safe mode, all I get is a screen with F3... appears. The machine has no CD / DVD drive. I WD have NOrton 360 a / v installed and it may have expired while I was not using the laptop (not been used for 6 weeks). I tried to remove the battery for 30 minutes, same result. All possible solutions? (I don't have the disc XP Home with me as I work away from my country of origin for a few weeks!

    Hello

    ·         What are the options made F3 gives on the computer?

    I suggest you follow the methods mentioned below:

    Method 1:

    Activate the hard disk and set hard as 1st priority to boot in the BIOS driver and check if the problem persists.

    Note: changes to the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

    Method 2:

    Check if the hard drive is detected in the BIOS.

    Note: If you are not not to check the BIOS. I suggest you to contact MSi U100 to get help at startup in the BIOS.

  • When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

    Original title: user profile

    My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

    Hello rhunter15,

    There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

    First of all, we run System File Checker to see if you have a corrupt file system.

    • Click Start
    • Click on all programs
    • Click Accessories, and then right-click on the command prompt.
    • Select the Security tab and choose "Run as Administrator"
    • Click on command prompt
    • Type SFC/scannow.

    It will scan and repair any damaged operating system files.

    To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

    KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
    http://support.Microsoft.com/kb/929135

    Once you have finished the clean boot, check again and see if you get the error of parental control.

    If please post again and let us know if that helped pinpoint the problem or if you still need help.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Start the computer to the top, but before the office back I get a black screen for 5 to 15 minutes long.

    Basically what the title says, "computer starts up, but before the office is up I get a black screen for 5-15 minutes long."

    I don't know the problem, looking it up and this is an annoying problem.

    Hi InterestedLearner,
     
    -Have you done recent changes made to your computer before this problem occurred?
     
    Updated the graphics driver and check if it helps fix the problem.
     
    Visit the manufacturer's Web site to do the same.
     
    Take a look at these items as well for more information on updating a driver:

  • My 2nd battery is being charged to the top, but never exceeds the level of 0%. HP ProBook 6450 b. Windows 7.

    Battery Checker reports the two batteries like OK. 1st as full battery which is correct. The 2nd battery as the maximum charge level, but actually does not increase.

    1. When did you buy this battery? More or less than a year ago?

    2 are you able to connect the second battery to a different series HP business notebook?

    I think that the second battery simply put an end to life and must be replaced.

  • When I export a PDF to JPEG, the margins are screwed to the top, but not in the PDF file. Why?

    I did a series of layouts landscape 8.5 x 11 in Illustrator, they all had the same instructions in the PDF file, aligning the different elements of text and vector itself. When I saved and print PDF files, they look good and printed as expected.

    However, when I go to file-> export... and save another version in JPEG format, they are all out either a little cut on the left margin or right margin. It is not consistent that confuses me, also because they look all uniforms in PDF format. Anyone know what I can do in the document or export the setting to prevent this from happening in Illustrator?

    When we realized that what was going on, we just open the PDF files in Acrobat Reader and saved in JPEG format, which takes more time, but is not screw up left or right margins. Any ideas what's happening? Thank you!

    You have to draw everything in alignment with pixels in Illustrator. Otherwise, a line may fall between 2 rows of pixels and you get this effect.

    But let's be honest, I think that JPG is not the best type of file to export from Illustrator. Why you do this?

    If you need to print, use HAVE or PDF/X-4, if you need it for the web or MS Office use PNG, if you need it on MS Office on Windows, use EMF.

    JPG has some kind of lossy compression that makes very visible spotty areas with drawings line Illustrator produces, so I would not recommend to export HAVE them in JPG format at all, unless you have a priority of photography and the work of art is not the object of your file.

Maybe you are looking for