CLIQ: Motoblur: unable to delete accounts of events or check the updates on phone

Similar Questions

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• Beta 5 of Firefox does not check the updates from an account without administrator privileges and won't ask administrator privileges apply downloaded update

  I can't get Firefox Beta 5 to check the updates using an account without administrator privileges. Beta version of Firefox 5 downloaded an update (from 2 Beta Beta 3), and now, there's a button apply update in the Firefox window that won't hurt, even though the update is properly applied from another account with administrator privileges.

  I use Windows 7 Professional 64-bit. In general, I use Firefox for an account without administrator privileges and provide the only administrator credentials when you are prompted to install or remove software.

  Delete the files in the folder updates\0 and updates.
  
  You may need to remove active - update.xml and updates.xml so, if it is present.

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

• Update error. Failed to check the updates. Event ID 1001

  Update error. Failed to check the updates. I rebooted the PC and the Windows Update service (it is activated and automatic when you restart).  Is there an event ID 1001 in the event log that shows when I try to run WinUpdate.

  Can anyone help solve this?

  Thank you.

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

• Error code: 80070490 (Windows is unable to check the updates)

  I get the error code 80070490 (windows is unable to check the updates) I did a system restore, full scan, virus, malware, rootkit, adware and spy ware.  Downloaded and installed the suggested fix for this issue on the microsoft site.  Nothing seems to help.  Any suggestions?

  Hello Pstrjohn,

  Thank you for your message.  You can also click HERE for more information about the Windows Update error Code: 80070490.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• I accidentally deleted my pictures. I checked the trash, but they aren't there. How can I get back them?

  I accidentally deleted my pictures. I checked the trash, but they aren't there. If not, where can I get?

  Hello

  You can try this program: Recuva

  http://www.Piriform.com/Recuva

• Unable to check the updates/updated to SP2... Vista home Edition? Attempts to load the update has failed as well. Source then help? __

  error code 80070005 update failed... deleted antivirus/firewall try to get the downloaded service.

  Hope that you have not been infected by some bad guys when you deleted the antivirus/firewall. Hope you had at least the Windows Firewall.

  In any case my notes to this forum.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2011 - Update Services

• iMovie clips are original media events library after the update v10 and visible events in iMovie, but clips do not appear in iMovie

  I've updated to iMovie 10.  He created a new library.  When you use Show Package Contents, I see events and clips are original media.  When I opened the app, I see the events, but there are clips 0 indicated in each event.  How to recognize the clips?

  Hi there Jeffkant,

  Looks like you have imported content in your new iMovie library, but there is no actual clips showing events you have in your library. I thought there might be a problem with the new library, or something could have damaged the library when the import was made, so I would like to start by creating a new library, once again the disk inside your movies folder:

  iMovie (2013): work with multiple libraries

  If the problem persists with the new library, then I create a new user admin on your computer and see if you can reproduce the problem there.

  OS X El Capitan: set up users on your Mac.

  Let me know how it goes, so we can see what to do next. Thank you for using communities of support from Apple!

• try to update to ios 9.3. Returns the message "Unable to check the updated" ios 9.3 has no verification because you are no longer connected to the internet

  try to update to ios 9.3. Returns the "cannot verify the update" message "ios 9.3 failure of verification because you are no longer connected to the internet"

  But of course I am connected.

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A fix for other devices is not yet available.

• Unable to check the update to update to ios 9.2.1

  I tried to update to ios 9.2.1 OTA but get an error "Failed to check the updated" "year error occurred while software update checking. Any suggestions

  Have you tried to update via iTunes? I suggest that do you it this way. You can do it on any computer running iTunes 12.2 or higher. You can even go into an Apple Store and it do.

  Good luck

  GB

• Error code 80080005. I am unable to check the updates of windows and install.

  She submitted my microsft update settings default Windows have been changed or moved.  Where can I find these settings and how do I change them so I can get my updates? I tried every difficulty, I can think.  I even did a system restore to where I saw my last update occurred, but nothing happens.  Everything else works as my anti-virus, windows Defender, etc, but I can't check the updates.

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Unable to delete the account...

  Hi, I'm a newbie to this phone (Palm Pre - (ISP) Bell Canada) and I have a few problems to delete an account that was setup when the phone was 1

  bought.

  OK, the phone is not mine, but our Senior VP. He is a geek (but not a located 1...)

  So what he was doing when he got his phone has been to set up a bad google (ex [email protected]) and not a gmail account

  in accordance with what should be the installer...

  He also missed this account up to such a degree, that the phone would not synchronize with him...

  So what I had to do is set up a new Google account for him (ex [email protected]) and then reset (do a Full delete) of his pre to hopefully allow me to

  make its flaw represent the new gmail account (which I couldn't do before)

  It worked... as I could now select representing each app to sync with (Mail/Calendar/Contacts).

  I was also allowed to remove (ex [email protected]) account from the phone, which was great.

  I also connected the web console to Palm Pre and made his account email and password, the same as the new gmail account I created for him.

  The problem is... is that the phone still sees his old account (ex [email protected]), though even I have (to my knowledge the best) deleted!

  It does not appear if I look at the profile of account on the phone, but it's done when I look at my sync preferences in the calendar...

  What I'm doing wrong here?

  This VP has a wizard with the exact phone (that has not done before the installer of the device until I could get my hands on it) and after installation, it works great!

  Any help would be great... I need to remove all know of his former account please...

  Sincerely,

  Paul

  Toronto

  Hardbeatz,

  Thanks for the reply...

  I hopefully fixed the problem with the Pre (crazy account).

  I spoke to the Palm Tech guys about this problem and finally found 1 who knew what I

  spoke.

  What I had to do was 2 times...

  1. I had to kill (disable) the cloud of Palm device backup (backup icon is in the launcher)

  2 - once on a 5 min wait, I had to do a full device erase (the device to factory default settings)

  The reason for the fork in backup, was to kill all the information on the phone on the Palm site.

  This would prevent any old gmail account information to reappear when I re-setup of the phone again.

  After resetting the phone and create a new gmail account. I did another "data-transfer-Agent" of Palm Desktop

  and sync then had the device with google again.

  So far, everything seems good... It has 1 calendar and not 3.

  There is a bug in the palm software, and he showed it's ugly nose during my 2 week with this device.

  Even if I had deleted accounts old Google out of the Meadow, every time I would entirely erase the Pre, the

  account would NOT show up on the device, BUT when you select another gmail (new) account to sync the calendar

  events (during the data synchronization process 1)... the events would be placed on an OLD account (deleted)... 1 which do not arise on the list of peripheral accounts.

  It seems that when you delete an account out of the device, the Palm site does not delete it form your configuration information.

  in any case, everything seems ok now... (crossing my fingers)

  Thx for your help

  Paul J.

  Toronto, Canada

• Vista Home Prem - problems since installation on 26 August updated - USB problems and everything deleted before the update restore points

  I have a Dell XPS 430 quad-processor. Receipt of the August 26 as update automatic updates. Since the computer was restarted after autoupdates, I have problems. Biggest problem is when I switch to another port my 4 ports KVM Trendnet TK - 407K and back on my Dell computer - the computer is blocked and the video is all garbled. My only recourse is to start the computer cold. After the first time it happened, I knew immediately updates, so I went in my restore points to restore back before the update. When I did restore bluescreened, but I was unable to capture data as computer restarted itself and get into the routine of starting fix. Difficulty of startup said it could not solve my problem.

  When I returned to restore to try to restore once again, I found that all my restore points have been removed. I found a utility called the shadow on the web Explorer and installed. He seems to find all my data restore point on the recovery D: drive, but Windows is not seeing them.  I should also mention, usb-wise, given that these updates have been applied, my Canon digital camera is not recognized when I hang it in one of the USB ports.

  Don't know what to do at this point. If I stay on the port on my computer using the KVM switch, my PC at home works well. Unfortunately, it is not realistic that I need to do my job in two laptops that are also connected to the switch.

  I'm tempted to just delete all the updates that have been installed on 8/26 to see if that helps - esp KB973879 I read on this patch causing a lot of problems with other computers.  Another thing that I have not tried is to use the restore from a command prompt application.

  Any suggestions would be greatly appreciated!

  Thank you!

  Hi brab61,

  Welcome to Microsoft Vista answers Forum!
   
  It is good to know that you're not faced problems with your computer.
   
  However, I suggest you go ahead and turn on Windows automatic updates to fix security vulnerabilities and it is beneficial for you to have these updates installed.
   
  Learn more about Windows Update, you can use the following link: -.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/default.mspx
   
   
  You can run the System File Checker tool before you activate the automatic updates.
   
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2 right click "cmd" in the list programs, and then click Run as administrator.
  3. you are asked to enter an administrator password or a confirmation, type your password or click on continue
  4. at the command prompt, type "sfc/scannow", and press ENTER.
   
  Note:- After that, you can now install an update both manually and check the update is causing the problem and let us know to help you and solve the problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope this information is useful.
   
  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the updates of Windows

  I am unable to connect to Windows update.  I use VISTA and receive the following error message:

  • Updated Windows cannot currently check the updates because the service is not running.  You may have to restart your computer.

  I rebooted several times without success.  Also, I update is enabled, so I'm at a loss to know what to do.

  Your output indicates a problem with the BITS service.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and menu file - import and bits_vista_32.reg of importation.

   

  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 171

   
  It should work on 64 or 32-bit vista.

  Reset.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  SC config BITS start = demand
  SC start BITS
   
   

• starting yesterday windows mail doesn't send mail and deleted emails are not going in the folder to delete first

  deleted emails disappear just - I checked the settings and they are not configured to automatically remove. When I try to send an e-mail, as they go to the Outbox and windows mail will not send not and gives all the details in the window box, its just empty. When you return to the Outbox of the body of the e-mail message was gone.

  You can have an email stuck, even if you don't see it.

  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  Bruce Hagen MS - MVP [Mail]