9 bit RS485... missing data please help!

Similar Questions

• I had saved my old 32-bit computer on a drive and the WD hard drive. I can't throw the disc or hard disk on my new 64-bit computer can you please help

  I had an old computer 32-bit Windows XP Professional

  All files and folders have been saved on the drive hard portable Western Digital and CD.

  I can't open the data in my new computer with Windows 7 Home premium 64 bit preinstalled by the vendor.

  The old computer is down.  I can't access my saved data.

  Can you please help.

  Thank you

  Hey riri,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems to restore backup data from Windows XP to Windows 7.

  What application did you use to back up data?

  Perform the steps from the link below and see if it is resolved.

  http://TechNet.Microsoft.com/en-us/magazine/ee851568.aspx

  Answer to us if you are having problems with the restoration of data or any question of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Sort data please help

  That's what I'm trying to do. I have a file periodic_chan3.bin which is sampled values of three channels of periodic signals in interlaced format. The data is stored in binary format (long of floating point of the double procession) DBL and big-endian representation. I am reading the file and draw all the three waveforms on the graph of a waveform. The data has been saved from time zero, with a sampling frequency of 100 samples per second. Then I scale the x-axis of your waveform graph so it displays the time in seconds.

  So I try, on the wave of the chart to create three sets of cursors and cursors to display the average value of each of the three waveforms. The color of the cursor Y for a given signal average must match the color of the display of the waveform on the chart. For example if the graph of the signal is displayed in red the cursor there shows the average of this signal must be red.

  What happens when I do not open the file I see a white contour mesh a sine graph, a graphical square and sawtooth chart. I can't seem to trace the three waveforms seen clearly with the three above-mentioned distinct colors. I can't seem to sort correctly and represented as mentioned above.

  I would also help with the calculation of the average or expected from each of the three periodic waveforms.

  Attached are the files please help. Pgm4 is the VI, and periodic_chan3 contains the data that needs to be sorted.  I'd be very happy if somene were able to fix the and submit the changes so I can see how it works. Thank you.

  Edit: I get an error that says periodic_chan4.bin "is not a valid extension of an attachment" so I'm not able to uplad it. Is there a way to othe I could download it?

  Xtasy26,

  In your post you mention that you try to view 3 averages of waveform, however your code is showing that you are broadcast 4 values. This might be the reason why your getting the different forms of data. Instead of an array of all the waveforms 1, then a table of all 2 waveforms and a waveform table 3, you get a mix of all three in each of your waveforms.

  To calculate a moving average or mean that it is actually an integrated in the example in BT sound finder called "running Avereage.vi calculation"

  You can also view the attachment to see Multiple waveforms channel displayed on a single chart.

• BlackBerry smartphones wipe all my data PLEASE HELP

  I tried to back up my phone with the blackberry desktop manager. I continued my password (I couldn't remember exactly what it was, I went online and to reset to the last attempt). I received the confirmation email that it has been reset, so I returned the new reset password. He said it was bad anyway and started wiping my device. EVERYTHING - all my contacts, all my sms, all my work, all emails. I jumped the battery when he was about 6% of the wiping process, but every time I got back on it starts wiping again. Please please please help me, how can I stop this? It's my phone, I have entered the correct password, I wanted to just back up my data and now I lose everything instead. Please help I have no idea who to call or where to go.

  Here is some info:

  http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB25063

  Page 14

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/25584/BlackBerry_Protect-User_Guide--105...

• I have problems on windows 7 64 bit of fallout 3 Please help me

  Fallout 3 for windows 7, I bought some time ago and before that I could play, but now it crashes when I try to start a new game someone please help me

  What are your system specs? FO3 will run on Win7 with compatibility for spe SP or sp1 for Vista.
  There are also one couple of other fixes not related to Win7.

  (1) the game has a problem with the quad-core processors
  Open the fallout.ini file in My Documents\My Games\Fallout3 (make a copy first to backup)
  Find the line:
  bUseThreadedAI = 0 (open the ini with Notepad file - click on Edit - can find - copy this line and paste it into the find what box)
  her take: bUseThreadedAI = 1
  -Add another line (press ENTER on keyboard) after him and insert: (copy and paste the following line)
  iNumHWThreads = 2
  -This limit the set for 2 hearts and prevent the engine bug to cause the game to freeze.
  (2) download and install Windows 7 Codec Pack - this will fix a problem with ffdshow codec.
  http://www.windows7codecs.com/
  (3) install the latest drivers for you graphics card and audio of the mfg web site.
  (4) updated Direct X with the installer of X Web live - should be done even if there is no problem with Direct X with FO3.
  Download details: DirectX end-user performance

  (5) install all the Windows Update 'important', but don't forget to setup as Windows updates in order to not
  install "optional" without you updates by selecting, in particular drivers graphics.

  If you still have problems please visit FO3 Nexus - the best site for all games - Bethesda
  Nexus Forums

  EDIT: I recently bought a 120 Hz monitor and just discovered the game freezes up if the
  monitor is set to 100 or 120 Hz. 60 Hz has no problem.
  .

• Min/max number of conclusion in a selected range of dates - Please HELP!

  Hi all

  I'm not very advanced at complex formulas however using this forum in recent weeks thanks to everyone here, I was able to create the automated collection of amazing data workbook. I searched for the last missing piece, and according to two explanations I've found here so far, that they are too complex for me to understand yet what I am eager to realize I thought was pretty simple.

  If anyone can help me with the formula to be used in these empty boxes, it will make my week!

  FYI, I use a mac look that is all to date.

  Thank you.

  

  Until there is an update to mac OS Sierra and new formula to exceed the numbers had worked for me. What is more, so I'm looking for the same answer on the new numbers. Take a look at the formula below and maybe it will give you an idea

  SUMIF (table 1: $1: $1, ">" & EOMONTH(A1,0) will GET (DATE ($A2, $ 1.1 M), 0), table 1: $VP)

• Degraded data please help im know if everything lost

  Hi, I recently bought a "new" rn21400 4 unit without drive Bay and two new disks 4 TB Western Digital RED.

  everything has been works well since I've set up three days ago, today I though I would transfer the last of my documents to the nas to my pc (approximately 250 GB of photos and music) before completing about 70% done the unit began flashing data degraded

  When I checked the volumes on the admin page one of the disks is red and when the information arrives he says bad disk.

  It is said with xraid on a raid level 1 I believe that must have 4 TB of backup?

  What should I do? I was really not lucky and got a faulty drive or a simple restart and resynchronization or other difficulty there. There is a lot of data on the nas about 1.2 TB of films, working papers that I really can't lose, ive so them removed from my home pc as I well they have ended safely to the nas.

  Help, please

  RAID-1 provides redundancy backup.

  With RAID-1 when a disk fails and you add a disk to a resynchronization is triggered. This puts heavy emphasis on all disks that the disks must be synchronized by sector. As the disk that was considered to be failed is added in the table it has probably been deleted. If the other drive happens to fail during the resynchronization (unlikely, but possible) then you may lose all your data.

  So if your data is important just store them on an SAR unit. You need a backup to another NAS unit or somewhere else. However, if the primary copy of the data is on your PC then copy on the NAS server is a backup.

  It would be helpful if you could send your logs as suggested BrianL.

  You cannot add smaller disks to X-RAID volume, but you can disable X-RAID and create a second volume, or you can reformat all (for example to do a factory reset) and create a new volume using all four disks.

• Missing drivers, please help.

  So I have recently reinstalled windows 7 64 bit home edition on my HP Pavilion dv6-6145dx

  and miss me the drivers that I can't find on the support page, in addition to that, the auto-scan driver does any work on my browser.

  If someone could help me locate the drivers or send me at least in the right direction on my research, it would be more useful.

  The need for pilots of the device is listed below.

  PCI device

  PCI\VEN_10EC & DEV_5209 & SUBSYS_358B103C & REV_01\4 & 257FE300 & 0 & 0030

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C & REV_03\3 & 2411E6FE & 1 & 81

  PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C & REV_03\3 & 2411E6FE & 1 & 80

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_358B103C & REV_13\3 & 2411E6FE & 1 & A0

  You are the very welcome.

  Here is the driver you need for the PCI device...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93979-1&cc=us&DLC=en&LC=en&OS=4063&product=5169541&sw_lang=

  Unfortunately, I do not know what to tell you on the external hard drive.

• socket InputStream does not get all the data, please help

  I've been doing stuff of network on blackberry for quite awhile, but still using the http connection.

  I have to use the socket for a piece of my application connection, but could not do the work.

  This code is what I do

  String url =

  "socket: / / ' + rmserver + ': ' + rmport;

  Socket SocketConnection = Connector.open (url) (SocketConnection);

  socket.setSocketOption (SocketConnection.KEEPALIVE, 1);

  OutputStream = socket.openOutputStream ();

  InputStream = socket.openInputStream ();

  send something here using outputstream

  int

  If (f > 0) {}

  do somwthing

  }

  AV is always 0.

  I don't know that my server sends data successfully. I run the network packet capture tool etheal on the MDS Server, I can see given reached MDS Server, but they never come to my device app.

  The outputstream works very well, I can send data from my application and my server code gets all of them.

  Where should I check? If it is http, I can turn on the debugging http on MDS log and see all network traffic, but for the socket connection, data packet is not connected (or I missed where it is).

  Is someone can you please tell me where I should go to understand why?

  Please try the suggestion to remove the check mark on InputStream.available.

• Cannot install VMware Workstation on Windows 8.1 Pro 64 bit 11.1.1 - Please help

  You want to install VMware Workstation 11.1.1 on new 8.1 Windows Pro 64-bit PC.

  I had VMware Workstation 11.1.0, and deleted the original installer but did not finish the installation of the new version

  The installer gets about 2/3 way (progress bar) and then crashes, Windows Installer says Event Viewer hung.

  Race tried without firewall and AV, always not install question

  A ran the installer with / clean option and then tried again, but still he did not finish the installation process (crashes at the same place)

  Noticed in the Manager tasks that VMware Installer runs at about 14% of CPU, but nothing happens

  I'm really at a loss as to why I can't install VMware Workstation 11.1.1, all the other soft\ware settles very well.

  Please could someone help me?

  Thank you

  Peter

  Ran Windows Update Troubleshooter

  It fixed a number of things

  I could then install VMware Workstation

  No idea but why the installer got himself in this State

• Dreamweaver CS6 - error of internal data - Please HELP!

  Hello

  I encounter an error of internal data on Dreamweaver CS6.

  I tried all the things on the forums as clear your cache, if it does not delete the whole folder cs6, I reinstalled and still its happens.

  Very frustrating, need to update clients websites and I can't connect.

  Help, please!

  Regards Stephanie

  What operating system?

  DW is installed on your hard drive?

  When DW starts acting weird, the first thing to try is delete the Cache of corrupt in DW

  http://forums.Adobe.com/thread/494811

  If this does not help, try to restore preferences

  http://helpx.Adobe.com/Dreamweaver/KB/restore-preferences-Dreamweaver-CS4-CS5.html

  If all else fails, use the tools of CS cleaner below scratch CS6 from your hard drive, followed by a re - install software.

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Nancy O.

• I can not IL2 Sturmovik for install on win7 64-bit using backwards compatibility please help program

  I tried to use the backward compat on different versions of windows and won't work troubled turned 3 times and still nothing so I came here for help.

  Hello

  You need to upgrade the version of IL2-Sturmovik, which is installed on your computer. The editor offers a paid upgrade for a
  compatible version.

  Check this link for more information:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=IL-2%20Sturmovik%3A%201946&v=Ubisoft&UID=&pf=0&PI=1&c=PC%20Gaming&SC=simulation%20%26%20Driving&OS=32-bit

  Visit this link to purchase the upgrade:

  http://www.Ubi.com/us/games/info.aspx?pid=5163

   

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Program of Complications [missing DLL] Please help

  When I opened my adobe applications, I would get this error "the program can't start because MSVCP100.dll is missing on your computer. Try reinstalling the program to fix this problem. "so I googled all the help I can find and nothing that I tried was able to solve the problem. I would try to reinstall applications, but it would give me a different error and wouldn't reinstall. So what I then do uninstall applications using the adobe cleaning tool. now when I try to reinstall the applications I am simply unable to do it because it gives me an error that I can't install it. so now I don't have one of the adobe apps on my desktop. How can I solve this problem?

  Missing DLL https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html can help

  - or 2015 runtime version https://www.microsoft.com/en-in/download/details.aspx?id=48145

• ALFA AWUS036H need driver for Win7 Ultimate 64 bit... s ' Please help.

  I need ALFA AWUS036H driver for Win7 Ultimate 64 bit...

  Waiting for answer

  Oualid Kurdy

  Solved...

  I find new driver at the following link...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PFID=1&level=6&Conn=5&ProdID=36&DownTypeID=3&GETDOWN=false&downloads=true

  Oualid Kurdy

• Files of missing components, please help!

  Hello. Recently, I moved my user folder to a new HARD drive and placed my apps and system folders on a smaller SSD on my iMac. After my OS SSD for my file on the other drive HARD internal via prefs system all works well - InDesign links, iTunes library, etc. - except that all assets in all my Muse site links are broken and muse can not see my original files. Can someone point me in the right direction for a solution please?

  Have you tried to repeat the asset with the new root path? If this isn't the case, then try it please.

  Thank you

  Sanjit